summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-pxa2xx.h
AgeCommit message (Collapse)Author
2013-02-08spi/pxa2xx: add support for Intel Low Power Subsystem SPIMika Westerberg
Intel LPSS SPI is pretty much the same as the PXA27xx SPI except that it has few additional features over the original: o FIFO depth is 256 entries o RX FIFO has one watermark o TX FIFO has two watermarks, low and high o chip select can be controlled by writing to a register The new FIFO registers follow immediately the PXA27xx registers but then there are some additional LPSS private registers at offset 1k or 2k from the base address. For these private registers we add new accessors that take advantage of drv_data->lpss_base once it is resolved. We add a new type LPSS_SSP that can be used to distinguish the LPSS devices from others. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lu Cao <lucao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08spi/pxa2xx: add support for DMA engineMika Westerberg
To be able to use DMA with this driver on non-PXA platforms we implement support for the generic DMA engine API. This lets user to use different DMA engines with little or no modification to the driver. Request lines and channel numbers can be passed to the driver from the platform specific data. The DMA engine implementation will be selected by default even on PXA platform. User can select the legacy DMA API by enabling Kconfig option CONFIG_SPI_PXA2XX_PXADMA. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Lu Cao <lucao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-08spi/pxa2xx: break out the private DMA API usage into a separate fileMika Westerberg
The PXA SPI driver uses PXA platform specific private DMA implementation which does not work on non-PXA platforms. In order to use this driver on other platforms we break out the private DMA implementation into a separate file that gets compiled only when CONFIG_SPI_PXA2XX_PXADMA is set. The DMA functions are stubbed out if there is no DMA implementation selected (i.e we are building on non-PXA platform). While we are there we can kill the dummy DMA bits in pxa2xx_spi.h as they are not needed anymore for CE4100. Once this is done we can add the generic DMA engine support to the driver that allows usage of any DMA controller that implements DMA engine API. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Lu Cao <lucao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>