summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)Author
2016-06-30Merge remote-tracking branches 'spi/fix/ep93xx', 'spi/fix/rockchip', ↵Mark Brown
'spi/fix/sunxi' and 'spi/fix/ti-qspi' into spi-linus
2016-06-14spi: sunxi: fix transfer timeoutMichal Suchanek
The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-06-14spi: sun4i: fix FIFO limitMichal Suchanek
When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-06-08spi: rockchip: Signal unfinished DMA transfersTomeu Vizoso
When using DMA, the transfer_one callback should return 1 because the transfer hasn't finished yet. A previous commit changed the function to return 0 when the DMA channels were correctly prepared. This manifested in Veyron boards with this message: [ 1.983605] cros-ec-spi spi0.0: EC failed to respond in time Fixes: ea9849113343 ("spi: rockchip: check return value of dmaengine_prep_slave_sg") Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-05-31spi: spi-ti-qspi: Suspend the queue before removing the deviceJean-Jacques Hiblot
Before disabling the pm_runtime, we must ensure that there is no transfer in progress nor will a new one be started. Otherwise the message pump will fail and in the end, the process requesting the transfer will be stuck. This behavior has been observed when transferring data from a SPI flash with dd while removing the module on a DRA7x-evm. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-28Merge tag 'sound-4.7-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound updates from Takashi Iwai: "This is the second update round for 4.7-rc1. Most of changes are about the pending ASoC updates and fixes, including a few new drivers. Below are some highlights: ASoC: - New drivers for MAX98371 and TAS5720 - SPI support for TLV320AIC32x4, along with the module split - TDM support for STI Uniperf IPs - Remaining topology API fixes / updates HDA: - A couple of Dell quirks and new Realtek codec support" * tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits) ALSA: hda - Fix headset mic detection problem for one Dell machine spi: spi-ep93xx: Fix the PTR_ERR() argument ALSA: hda/realtek - Add support for ALC295/ALC3254 ASoC: kirkwood: fix build failure ALSA: hda - Fix headphone noise on Dell XPS 13 9360 ASoC: ak4642: Enable cache usage to fix crashes on resume ASoC: twl6040: Disconnect AUX output pads on digital mute ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers rcar: src: skip disabled-SRC nodes ASoC: max98371 Remove duplicate entry in max98371_reg ASoC: twl6040: Select LPPLL during standby ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS ASoC: simple-card: Add pm callbacks to platform driver ASoC: pxa: Fix module autoload for platform drivers ASoC: topology: Fix memory leak in widget creation ASoC: Add max98371 codec driver ASoC: rsnd: count .probe/.remove for rsnd_mod_call() ASoC: topology: Check size mismatch of ABI objects before parsing ASoC: topology: Check failure to create a widget ASoC: add support for TAS5720 digital amplifier ...
2016-05-26Merge branch 'asoc-fix-ep93xx' into spi-fix-ep93xxMark Brown
2016-05-25Merge remote-tracking branches 'asoc/fix/ak4642', 'asoc/fix/ep93xx', ↵Mark Brown
'asoc/fix/kirkwood' and 'asoc/fix/twl6040' into asoc-linus
2016-05-24Merge tag 'spi-v4.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Another quiet release for SPI, almost entirely driver specific changes with the diffstat dominated by two new drivers which are about two thirds of it in terms of lines of code: - new drivers for PIC32 standard and SQI controllers - the Cadence driver has had runtime PM support added and quite a few fixes and cleanups - flash-specific accelerated path support now has a feature query interface - the pxa2xx driver has been moved to use the core DMA mapping support" * tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits) spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops' spi: dw-pci: Spelling s/paltforms/platforms/g spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup spi: Fix simple typo s/impelment/implement spi: rockchip: potential NULL dereference on error spi: zynqmp: disable clocks in error paths spi: Drop unnecessary dependencies on relaxed I/O accessors spi: qup: Add spi_master_put in remove function spi: qup: Handle clocks in pm_runtime suspend and resume spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths spi: st-ssc4: Allow compile test build spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel spi: davinci: Use dma_request_chan() for requesting DMA channel spi: pic32: Fix checking return value of devm_ioremap_resource spi: spi-fsl-dspi: Update DT binding documentation spi: Drop duplicate code to set master->dev.parent spi: pic32: Set proper bits_per_word_mask spi: return error if kmap'd buffers passed to spi_map_buf() spi: core: add hook flash_read_supported to spi_master spi: pic32-sqi: silence array overflow warning ...
2016-05-24spi: spi-ep93xx: Fix the PTR_ERR() argumentFabio Estevam
PTR_ERR should access the value just tested by IS_ERR. The semantic patch that makes this change is available in scripts/coccinelle/tests/odd_ptr_err.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-23Merge remote-tracking branch 'spi/topic/zynqmp' into spi-nextMark Brown
2016-05-23Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qup', ↵Mark Brown
'spi/topic/rockchip', 'spi/topic/st-ssc4' and 'spi/topic/xlp' into spi-next
2016-05-23Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/omap2-mcspi', ↵Mark Brown
'spi/topic/orion', 'spi/topic/pic32' and 'spi/topic/pic32-qspi' into spi-next
2016-05-23Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/flash-read', ↵Mark Brown
'spi/topic/fsl-dspi', 'spi/topic/fsl-espi' and 'spi/topic/kconfig' into spi-next
2016-05-23Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/cadence', ↵Mark Brown
'spi/topic/davinci' and 'spi/topic/dln2' into spi-next
2016-05-23Merge remote-tracking branch 'spi/topic/core' into spi-nextMark Brown
2016-05-19Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "This time round the update brings in following changes: - new tegra driver for ADMA device - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central Direct Memory Access Engine and few updates to this driver - new cyclic capability to sun6i and few updates - slave-sg support in bcm2835 - updates to many drivers like designware, hsu, mv_xor, pxa, edma, qcom_hidma & bam" * tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits) dmaengine: ioatdma: disable relaxed ordering for ioatdma dmaengine: of_dma: approximate an average distribution dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event dmaengine: qcom_hidma: add support for object hierarchy dmaengine: qcom_hidma: add debugfs hooks dmaengine: qcom_hidma: implement lower level hardware interface dmaengine: vdma: Add clock support Documentation: DT: vdma: Add clock support for dmas dmaengine: vdma: Add config structure to differentiate dmas MAINTAINERS: Update Tegra DMA maintainers dmaengine: tegra-adma: Add support for Tegra210 ADMA Documentation: DT: Add binding documentation for NVIDIA ADMA dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI CDMA dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine Documentation: DT: vdma: update binding doc for AXI DMA dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC ...
2016-05-13spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'.Purna Chandra Mandal
Even if DMA support is disabled code using DMA mapping APIs compiles fine, but fails in linking. ------- drivers/built-in.o: In function `ring_desc_ring_free': spi-pic32-sqi.c:(.text+0x2cfbe0): undefined reference to `bad_dma_ops' spi-pic32-sqi.c:(.text+0x2cfbe4): undefined reference to `bad_dma_ops' drivers/built-in.o: In function `pic32_sqi_probe': spi-pic32-sqi.c:(.text+0x2cfe48): undefined reference to `bad_dma_ops' spi-pic32-sqi.c:(.text+0x2cfeb0): undefined reference to `bad_dma_ops' spi-pic32-sqi.c:(.text+0x2cff38): undefined reference to `bad_dma_ops' -------- Correct dependency by adding 'depends on HAS_DMA' in Kconfig. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-11spi: dw-pci: Spelling s/paltforms/platforms/gGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-06Merge remote-tracking branches 'spi/fix/fsl-dspi', 'spi/fix/omap2-mcspi', ↵Mark Brown
'spi/fix/pxa2xx' and 'spi/fix/ti-qspi' into spi-linus
2016-05-06spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanupAxel Lin
Current code does not use ctldata at all, so remove spi_set_ctldata call. spi_setup() will set spi->bits_per_word = 8 if it was not set, so remove !spi->max_speed_hz checking. The spi core allows absent of spi->max_speed_hz setting, if it was not set spi_setup() assigns spi->master->max_speed_hz to it. spi core allows spi->max_speed_hz > spi->master->max_speed_hz, in this case spi core will limit the transfer speed to ensure xfer->speed_hz won't greater than spi->master->max_speed_hz so remove checking if spi->max_speed_hz is higher than spi->master->max_speed_hz. As a result, both pic32_sqi_setup() and pic32_sqi_cleanup() can be removed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-04spi: Fix simple typo s/impelment/implementMoritz Fischer
This fixes a simple typo in one of the comments. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-04spi: rockchip: potential NULL dereference on errorDan Carpenter
We were calling dma_release_channel(rs->dma_tx.ch) when "rs->dma_tx.ch" is potentially NULL. There is actually a call to that in the unwind code at the bottom of the function so we can just re-arrange this a bit and remove the call. Also there is no need to set rs->dma_tx.ch to NULL on this error path. Fixes: e4c0e06f949b ('spi: rockchip: fix probe deferral handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-04spi: zynqmp: disable clocks in error pathsShubhrajyoti Datta
The if pclk enable fails the refclk is not disabled. Fix the same. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02spi: Drop unnecessary dependencies on relaxed I/O accessorsAxel Lin
The relaxed I/O accessors are available on all architectures now. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02spi: qup: Add spi_master_put in remove functionPramod Gurav
Release memory allocated for spi master by calling spi_master_put in .remove function. Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02spi: qup: Handle clocks in pm_runtime suspend and resumePramod Gurav
Clocks must ne disabled in pm_runtime to achieve some power saving. Enable the clocks when the device is runtime resumed during a transfer. Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error pathsAxel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29spi: st-ssc4: Allow compile test buildAxel Lin
There is no build dependency for this driver, so enable COMPILE_TEST to get better build coverage. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channelPeter Ujfalusi
With the new dma_request_chan() the client driver does not need to look for the DMA resource and it does not need to pass filter_fn anymore. By switching to the new API the driver can now support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29spi: davinci: Use dma_request_chan() for requesting DMA channelPeter Ujfalusi
With the new dma_request_chan() the client driver does not need to look for the DMA resource and it does not need to pass filter_fn anymore. By switching to the new API the driver can now support deferred probing against DMA. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29spi: pic32: Fix checking return value of devm_ioremap_resourceAxel Lin
devm_ioremap_resource() returns ERR_PTR on error. Also remove the redundant dev_err message, the implementation of devm_ioremap_resource() already print error messages on error paths. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-26spi: Drop duplicate code to set master->dev.parentAxel Lin
It's done by spi_alloc_master(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-26spi: pic32: Set proper bits_per_word_maskAxel Lin
This driver only supports 8/16/32 bits_per_word, so set master->bits_per_word_mask accordingly. With this change, we can remove the spi->bits_per_word checking in pic32_spi_setup as it's done by spi core. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-26spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPTJarkko Nikula
Certain Intel Sunrisepoint PCH variants report zero chip selects in SPI capabilities register even they have one per port. Detection in pxa2xx_spi_probe() sets master->num_chipselect to 0 leading to -EINVAL from spi_register_master() where chip select count is validated. Fix this by not using SPI capabilities register on Sunrisepoint. They don't have more than one chip select so use the default value 1 instead of detection. Fixes: 8b136baa5892 ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-04-25spi: return error if kmap'd buffers passed to spi_map_buf()Vignesh R
Current spi_map_buf() implementation supports creates sg_table for vmalloc'd and kmalloc'd buffers. Therefore return error if kmap'd buffer (or any other buffer) is passed to spi_map_buf(). Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-22spi: pic32-sqi: silence array overflow warningDan Carpenter
We read one element beyond the end of the array when we access "rdesc[i + 1]" so it causes a static checker warning. It's harmless because we write over it again on the next line. But let's just silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-22spi: spi-orion: enable the driver on ARCH_MVEBU platformsThomas Petazzoni
The SPI controller managed by the spi-orion is used on the new ARM64 Marvell Armada 7K/8K SoCs. In order to allow this driver to be built for this platform, we allow it to be selected for ARCH_MVEBU=y configurations. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20spi: spi-pxa2xx: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18spi: pic32-sqi: add SPI driver for PIC32 SQI controller.Purna Chandra Mandal
This driver implements SPI master interface for Quad SPI controller, specifically for accessing quad SPI flash. It uses descriptor-based DMA transfer mode and supports half-duplex communication for single, dual and quad SPI transactions. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18spi: bcm53xx: add spi_flash_read callback for MMIO-based readsRafał Miłecki
This implements more efficient reads of SPI-attached flash content. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18spi: cadence: mark pm functions __maybe_unusedArnd Bergmann
The newly added runtime PM support for the cadence spi driver causes harmless warnings when PM is disabled: drivers/spi/spi-cadence.c:681:12: warning: 'cnds_runtime_suspend' defined but not used drivers/spi/spi-cadence.c:652:12: warning: 'cnds_runtime_resume' defined but not used This adds __maybe_unused annotations to the respective functions to shut up the warnings, while leaving the code in place for compile testing and avoiding ugly #ifdefs. Fixes: d36ccd9f7ea4 ("spi: cadence: Runtime pm adaptation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-15spi: dln2: Pass of_node to spi masterCrestez Dan Leonard
This allows defining SPI devices connected to a DLN2 using devicetree. This already works for i2c because of a similar patch: 3b10db23: i2c: dln2: set the device tree node of the adapter Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Acked-by: Laurentiu Palcu <laurentiu.palcu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-13dmaengine: dw: rename masters to reflect actual topologyAndy Shevchenko
The source and destination masters are reflecting buses or their layers to where the different devices can be connected. The patch changes the master names to reflect which one is related to which independently on the transfer direction. The outcome of the change is that the memory data width is now always limited by a data width of the master which is dedicated to communicate to memory. The patch will not break anything since all current users have the same data width for all masters. Though it would be nice to revisit avr32 platforms to check what is the actual hardware topology in use there. It seems that it has one bus and two masters on it as stated by Table 8-2, that's why everything works independently on the master in use. The purpose of the sequential patch is to fix the driver for configuration of more than one bus. The change is done in the assumption that src_master and dst_master are reflecting a connection to the memory and peripheral correspondently on avr32 and otherwise on the rest. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-13spi: spi-ti-qspi: Handle truncated frames properlyBen Hutchings
We clamp frame_len_words to a maximum of 4096, but do not actually limit the number of words written or read through the DATA registers or the length added to spi_message::actual_length. This results in silent data corruption for commands longer than this maximum. Recalculate the length of each transfer, taking frame_len_words into account. Use this length in qspi_{read,write}_msg(), and to increment spi_message::actual_length. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-04-13spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overriddenBen Hutchings
Each transfer can specify 8, 16 or 32 bits per word independently of the default for the device being addressed. However, currently we calculate the number of words in the frame assuming that the word size is the device default. If multiple transfers in the same message have differing bits_per_word, we bitwise-or the different values in the WLEN register field. Fix both of these. Also rename 'frame_length' to 'frame_len_words' to make clear that it's not a byte count like spi_message::frame_length. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-04-12spi: let SPI masters ignore their children for PMLinus Walleij
Let all SPI masters ignore their children: when it comes to power management: SPI children have no business doing keeping their parents awake: they are completely autonomous devices that just use their parent to talk, and the latter usecase must be power managed by the host itself on a per-message basis. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-12spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced bufferAkinobu Mita
This reverts commit 3525e0aac91c4de5d20b1f22a6c6e2b39db3cc96. The DMA transfer for RX buffer was not handled correctly in this change. The actual transfer length for DMA RX can be less than xfer->len in the specific condition and the last words will be filled after the DMA completion, but the commit doesn't consider it and the dmaengine is started with rx_sg mapped by spi core. The solution for this at least requires more lines than this commit has inserted. So revert it for now. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-06spi: cadence: Fix some checkpatch warningsShubhrajyoti Datta
No functional change. Fixing some style related issues CHECK: multiple assignments should be avoided + new_ctrl_reg = ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR); CHECK: Alignment should match open parenthesis +static void cdns_spi_config_clock_freq(struct spi_device *spi, + struct spi_transfer *transfer) CHECK: Please use a blank line after function/struct/union/enum declarations +} +static int cdns_prepare_message(struct spi_master *master, Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05spi: spi-fsl-dspi: Fix cs_change handling in message transferAndrey Vostrikov
There are use cases when chip select should be triggered between transfers in single SPI message. Current implementation does this only on last transfer in message ignoring cs_change value provided in current transfer. Signed-off-by: Andrey Vostrikov <andrey.vostrikov@cogentembedded.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-19 02:51:51 +0000