| Age | Commit message (Collapse) | Author |
|---|
|
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While the timesync protocol was a great idea, it never ended up getting
implemented by any known hardware devices. It's also a bit
"interesting" in how it ties into the platform controller.
So, just remove it for now. It's not needed, no one uses it, and it's a
stumbling block in getting the greybus core code merged out of the
staging tree. If anyone wants it in the future, reverting this patch is
a great place to start from.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The firmware now keeps the underlying hardware disabled until
receiving the first Bundle Activate request. Additionally: requesting
transition to a state the bundle is already in is no longer an error.
We can now add proper error handling to the bundle activate call.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently the probe() function contains the asynchronous() variant of
FrameTime synchronization. This patch converts to the synchronous() version
of synchronization. This is required for two reasons first a probe() cannot
reasonably be considered to be complete without successfully completing a
time synchronization for Interfaces that care about that sync. Secondly
scheduling the operation asynchronously means its possible the PM-runtime
suspend() path can execute before the async timesync operation completes.
For both reasons we want to run synchronization - synchronously.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Implement platform driver shutdown callback to perform proper greybus
shutdown so that the userspace unipro_shutdown service that shuts down
the APB/SVC abruptly can be removed. The shutdown callback in
arche-platform will first remove SVC so that all the Interface can be
Deactivated in a sequence according to the spec before powering off the
APB:
Before:
-> Arche/APB power off
-> SoC power off
After this patch:
-> HD shutdown
-> SVC shutdown
-> Module shutdown
-> Interface shutdown
-> Bundle shutdown
-> Arche/APB power off
-> SoC power off
Testing Done:
- Observe all Interfaces are deactivated in the log during shutdown
- Measure power off current and make sure no regression
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This patch adds runtime pm support for the bundle core. Unbound bundle
devices are always deactivated. During probe, Runtime PM status is set
to enabled and active and the usage count is incremented. If the driver
supports runtime PM, it should call pm_runtime_put() in its probe
routine and pm_runtime_get_sync() in remove routine as bundle needs to
be resume before it can be deactivated.
Testing Done:
- Check runtime_status of the bundle driver when bundle goes to suspend
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
AP shall send the Bundle Activate Operation to power on a bundle, and
send the Bundle Deactivate Request after closing all the associated
connections for power down.
Testing Done:
- Check for the return code of the bundle activate and deactivate
operation sent
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Alex Elder <elder@linaro.org>
|
|
There is no point keeping this code in core.c, while its only used by
hd.c. Relocate it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This routine always returns 0 or 1 and a return type of 'bool' suits it
the best. Update it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
User space doesn't break anymore with new greybus modules and its time
to make bootrom a separate module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Core disables all connections for bundles whose interface is already
gone in order to avoid unnecessary operation timeouts during driver
disconnect.
This isn't needed for offloaded connections (as the AP can not send
requests over such connections), and in fact must not be done since only
the bundle driver currently knows how to disable I/O on such connections
in a class-specific way (this may eventually be handled by core though).
Also add comment about why connection are disabled early on forced
disconnect.
Testing Done: Tested on EVT2.
Reported-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
TimeSync needs to bind into Greybus in a few places.
- core.c
To initialize its internal state and tear-down its internal state.
To schedule a timesync to a newly added Bundle after probe() completes.
- svc.c
To get access to the SVC and enable/disable timesync as well as
extracting the authoritative time from the SVC to subsequently
disseminate to other entities in the system.
- interface.c
To get access to an Interface in order to inform APBx of timesync
enable/disable and authoritative operations.
This patch adds those bindings into Greybus core.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add new helper to disable connections to interfaces that have already
been disconnected (e.g. forcibly removed).
The connection tear-down procedure differs enough depending on whether
the interface is still present or already gone to warrant a dedicated
helper. This will become more obvious with the new tear-down procedure,
which involves I/O on the connection being tore down.
This also simplifies handling of the legacy bootrom, which does not
support the new tear-down operations.
Specifically, this allows us to remove the early control-connection
tear down during interface disable, and also avoids some error messages
currently printed during legacy mode switch (i.e. bootrom
boot-over-UniPro) and forcible removal.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Currently there are two trace points defined for the Greybus host
device structure. One records information when a message gets sent,
and another when it gets received. Neither of these is really a
host device event.
We have trace points defined for messages that dump information
about all sent and received messages. As a result, the information
about sending messages over a host is redundant, and can go away.
(Note that the message traces may need a little refinement so they
produce all desired information.)
Instead of these trace points, define some that are directly
related to the host device abstraction: when one is created,
added, deleted, or released (destroyed). These do not require
a CPort ID or payload size, so eliminate those two parameters
from the host device trace point prototype. Change the trace
information recorded for a host device to be just a subset of
interesting fields in a host device.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This patch removes the greybus legacy driver support
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
greybus_module_match() doesn't match modules anymore but bundle devices
and should be named correctly.
Though we can use greybus_bundle_match() as well, rest of the kernel
uses terminology like 'greybus_match_device' and so choosing that
instead.
Compile tested.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
The new ctrl device under interface is missing a MODULE uevent var,
add it.
Testing Done:
cat 'uevent' from ctrl device.
$ cat 1-3.3.ctrl/uevent
DEVTYPE=greybus_control
BUS=1
MODULE=3
INTERFACE=3
GREYBUS_ID=fffe0001/ffee0011
Signed-off-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add Greybus module abstraction that will be used to implement controlled
module removal (eject) and represent module geometry.
Greybus module devices correspond to physical modules and have one or
more interfaces. Modules have an id that is identical to the id of their
primary interface, which in turn is the interface with lowest numbered
id. The module name is constructed from the bus and module id:
<bus_id>-<module_id>
Interfaces, bundles, and control devices are consequently renamed as
<bus_id>-<module_id>.<interface_id>
<bus_id>-<module_id>.<interface_id>.<bundle_id>
<bus_id>-<module_id>.<interface_id>.ctrl
As before, interface ids (and therefore in a sense now also module ids)
correspond to physical interface positions on the frame.
Modules have the following attributes:
module_id
num_interfaces
where module_id is the id of the module and num_interface the number of
interfaces the module has.
Note that until SVC module-size detection has been implemented, all
interfaces are considered to be part of 1x2 modules. Specifically, the
two interfaces of a 2x2 module will be presented as two 1x2 modules for
now.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Make the control object be a greybus device.
The control device will be used to expose attributes specific to
greybus-type interfaces.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Align with Greybus specifications and rename Firmware Protocol driver as
Bootrom Protocol driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Now that userspace is ready for all 32 bits of the vid/pid, take off our
mask and send the full values.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Convert the legacy firmware protocol driver to a bundle driver.
This also fixes a potential crash should a (malicious) module have sent
an early request before the private data had been initialised.
Note that the firmware protocol needs to support the version request
indefinitely since it has been burnt into ROM.
In order to avoid having to update current module-loading scripts, keep
this driver internal to greybus core at least until modalias support is
added.
Note that there is no MODULE_DEVICE_TABLE defined for firmware as we
cannot have two greybus tables in one module on ancient 3.10 kernels and
that the legacy driver is currently also internal to core. This needs be
added once the driver can be built as a module.
Testing Done: Tested on DB3.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Defer connection creation to bundle driver probe instead of creating
them when initialising the interface and parsing the manifest.
Store copies of the CPorts descriptors in the bundle for the drivers to
use, and update the legacy driver.
This is needed for drivers that need more control over host-device
resource management, for example, when a protocol needs to use a
dedicated host CPort for traffic offloading (e.g. camera data).
This also avoids allocating host CPorts for bundles that are not bound
to a driver or for remote CPorts that a driver does not need.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
When bundles are added and then removed, we have a race where we go to
read the sysfs file, but it is now for a different bundle than the
uevent was originally for. So add the bundle class to the uevent so we
"know" what the correct bundle class was.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Disable bundle connections in core before calling driver disconnect in
case the interface is already gone.
This avoids unnecessary timeouts on hot-unplug when a driver does I/O in
its disconnect callback.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Drop dependency on the legacy protocol abstraction.
Remove the now unused and last legacy-protocol flag
GB_PROTOCOL_SKIP_VERSION along with the protocol-flag feature.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Drop dependency on the legacy protocol abstraction.
Instead implement the protocol-specific version request directly, and
use the new interface for managing the control connection.
Note that the version request is being removed from most protocols, but
we need to keep the current request for the control protocol as-is
indefinitely to maintain backwards compatibility (e.g. with the ES2/ES3
bootrom).
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Bundle drivers *must* disable their connections in the disconnect
callback, but add a defensive test and warn about buggy drivers
nonetheless.
Note that bundle drivers would generally release their state containers
in disconnect so a failure stop I/O could potentially lead to
use-after-free bugs in any late operation completion callbacks.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Disable and flush incoming operations before calling driver disconnect.
Bundle drivers are still responsible for disabling their connections
in their disconnect callback.
Note that specifically the legacy protocols must have incoming
operations disabled when their connection_exit callback is called as
that is where their state is deallocated.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add the first Greybus bundle driver that will be used when transitioning
from legacy Greybus protocols to bundle drivers.
The legacy-protocol driver initially binds to all current bundle classes.
In order to avoid having to update current module-loading scripts, keep
this driver internal to greybus core at least until modalias support is
added. Note that this prevents unloading any protocol drivers without
first tearing down the host device due to a circular module dependency.
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This adds the GREYBUS_ID environment variable to all interface uevents
to let userspace know the vendor/product id of the module interface that
has been added or removed from the system.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The bus code should only match bundle devices for now, and must not
assume all greybus devices are bundles.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add missing bus type to driver structure when registering a greybus
driver.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add the bundle id to bundle uevents.
This is needed to identify bundles that are being removed (e.g. at
hot-unplug).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add the interface id to interface and bundle uevents.
This is needed to identify interfaces that are being removed (e.g. at
hot-unplug).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Add the bus id to all greybus uevents.
This is needed to identify devices that are being removed (e.g. at
hot-unplug).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Remove the now unused endo and module code.
Note that the never-implemented serial and version attributes of the
endo can be implemented as svc attributes if needed.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Register the svc device upon reception of the HELLO request.
The SVC HELLO request contains the endo id and AP interface id, which
will be exposed from the svc device rather than the endo.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Make the host device a proper device in the kernel device model.
Host devices will be our new greybus-bus root devices.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Rename vendor and product attributes vendor_id and product_id.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Move id-matching back to core and the bus code where it belongs.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Move everything host-device related to hd.c and hd.h.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Connections are destroyed as part of interface tear down. If we fail to
do that properly it's a bug that should be fixed rather than papered
over by a fall-back clean up function.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
It belongs to the endo layer and should be placed in endo.c instead. Do
it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
As we are going to be removing the struct device from gb_connection,
there is no need to do anything for uevents for them. So just remove
the code. It wasn't doing anything anyway, so no functionality is lost
here at all.
As is_gb_connection() is no longer used, that is also removed in this
patch.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
|
|
This patch adds new tracepoint declarations to greybus_trace.h to allow for
capture of greybus host device tx and rx events. These two tracepoints
allow an observer to see the point where the hardware interface driver
performs the relevant read or write to receive or write the data it's been
given from the higher layer greybus driver.
The following two new tracepoints are declared:
- trace_gb_host_device_send
- trace_gb_host_device_recv
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
This patch hooks tracepoints for greybus messages
- trace_gb_message_send
- trace_gb_message_recv_request
- trace_gb_message_recv_response
- trace_gb_message_cancel_outgoing
- trace_gb_message_cancel_incoming
It provides standard tracepoints at
/sys/kernel/debug/tracing/events/greybus/gb_message_send
/sys/kernel/debug/tracing/events/greybus/gb_message_recv_response
/sys/kernel/debug/tracing/events/greybus/gb_message_recv_request
/sys/kernel/debug/tracing/events/greybus/gb_message_cancel_outgoing
/sys/kernel/debug/tracing/events/greybus/gb_message_cancel_incoming
Giving outputs like
gb_message_recv_request: greybus:1-1.1:0 op=0001 if_id=0000 hd_id=0000 l=2
gb_message_send: greybus:1-1.1:0 op=0001 if_id=0000 hd_id=0000 l=2
Similarly perf events can be viewed with standard perf tools e.g.
root@beaglebone:~# perf list 'greybus:*'
greybus:gb_message_send [Tracepoint event]
greybus:gb_message_recv_request [Tracepoint event]
greybus:gb_message_recv_response [Tracepoint event]
greybus:gb_message_cancel_outgoing [Tracepoint event]
greybus:gb_message_cancel_incoming [Tracepoint event]
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
|
|
Both the routines are always called together and in the same sequence.
Rather than duplicating this at different places, make
gb_connection_destroy() call gb_connection_exit().
This also makes it more sensible, as gb_connection_init() is never
called directly by the users and so its its counterpart shouldn't be
called directly as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
|
|
Make sure to return an errno when a host-device buffer-size check fails.
Fixes: 1f92f6404614 ("core: return error code when creating host device")
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
|
