Age | Commit message (Collapse) | Author |
|
In the early days of IIO we were much more inclined to keep the impact
of the core IIO elements to the minimum. As time has moved on it has
become clear that hardly any builds are done without buffer support
and that it adds considerable complexity to the drivers.
Hence merge down the buffer and non buffer elements of the sca3000 driver
also allowing us to drop the header file used for the interfaces between
the two.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
|
|
pointer.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
|
|
This patch removes the unnecessary else following an if block with a
goto statement.
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable u8 **rx_p, is a pointer-to-pointer and hence the check
should
be "if (!*rx_p)" and not "if (!rx_p)".
In the earlier version, checkpatch.pl gave the following check, which
was incorrect:
CHECK: Comparison to NULL could be written "!rx_p"
+ if (*rx_p == NULL) {
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This patch add blank lines after functions definitions in
order to follow the linux coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch changes uint8_t type to preferred kernel
type u8 in order to follow the linux coding style
conventions.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch properly aligns the function arguments or
its parameters in order to match the open bracket.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds spaces around binary operators such as '*',
'/', '+' in order to improve readability.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the other staging patches in this branch as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove comparisons to 0 or NULL
Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"num_read" is in byte units but we are write u16s so we end up write
twice as much as intended.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
For each buffer type specify the supported device modes for this buffer.
This allows us for devices which support multiple different operating modes
to pick the correct operating mode based on the modes supported by the
attached buffers.
It also prevents that buffers with conflicting modes are attached
to a device at the same time or that a buffer with a non-supported mode is
attached to a device (e.g. in-kernel callback buffer to a device only
supporting hardware mode).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Currently the IIO buffer blocking read only wait until at least one
data element is available.
This patch makes the reader sleep until enough data is collected before
returning to userspace. This should limit the read() calls count when
trying to get data in batches.
Co-author: Yannick Bedhomme <yannick.bedhomme@mobile-devices.fr>
Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr>
[rebased and remove buffer timeout]
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
We already do have the length field in the struct iio_buffer which is
expected to be in sync with the current size of the buffer. And currently
all implementations of the get_length callback either return this field or a
constant number.
This patch removes the get_length callback and replaces all occurrences in
the IIO core with directly accessing the length field of the buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
All buffers want at least the length and the enable attribute. Move the
creation of those attributes to the core instead of having to do this in
each individual buffer implementation. This allows us to get rid of some
boiler-plate code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
There haven't been any users of the get_bytes_per_datum() callback for a
while. The core assumes that the number of bytes per datum can be calculated
based on the enabled channels and the storage size of the channel and
iio_compute_scan_bytes() is used to compute this number. So remove the
callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
This patch fixes these warning messages found by sparse:
drivers/staging/iio/accel/sca3000_ring.c:120:61: warning: incorrect type in argument 1 (different base types)
drivers/staging/iio/accel/sca3000_ring.c:120:61: expected restricted __be16 const [usertype] *p
drivers/staging/iio/accel/sca3000_ring.c:120:61: got unsigned short [usertype] *
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change sca3000_ring implementation so that it exports a data_available
function to iio.
Signed-off-by: Josselin Costanzi <josselin.costanzi@mobile-devices.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
then pr_warn(... to printk(KERN_INFO ... in sca3000_ring.c
This patch fixes the following checkpatch.pl warning in sca3000_ring.c
WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Fourth round of IIO new drivers, functionality and cleanups for the 3.13 cycle.
New Drivers
* cm36651 combined RGB light and proximity sensor.
Core improvements
* Some more fixes and cleanups related to buffers. These include the second
half of a series which went is as fixes. The basis for delaying until the
next merge window is that some are too invasive for this late in a cycle
and others only effect code paths current unused in the mainline tree.
In this case we have:
* protecting against concurrent userspace access
* fixing a memory leak if a device goes away
* avoiding always reallocating the buffer whether or not it has changed
(a bug fix, but one with no functional changes other than a small speed
improvement.)
* Add reference counting for buffers to ensure they hang around if open
from userspace or in kernel when the device is forcefully removed.
* Return -ENODEV for buffer access operations when the device has gone
away.
* Add proper locking for iio_update_buffers (currently we only have one
buffer per device in mainline, but an input bridge driver is under
development which would make this bug 'real'.)
* Wake up anyone waiting on a buffer if the device is unregistered. A
subsequent read will fail, notifying userspace that the device is no
longer there rather than having it wait possibly for ever.
* Move the iio_sw_preenable functionality into the core. This avoids drivers
having to 'know' about how the buffers are implemented and is called by
almost all drivers anyway. Those that don't call it are not harmed by it
being called.
* New registration approach for information (i.e. sysfs attributes) about
events. Much more generic and now similar to how the equivalent is
handled for channel information. The events infrastructure had been left
behind by other changes so this brings it back in line.
* Using the new events registration approach, add a hysterisis event_info
element and apply this to those drivers with this property.
* A little unitialized variable bug in the generic_buffer.c example.
* Factor out the code for freeing lists of IIO Device attributes to avoid
some repitition.
Driver cleanups
* At91 driver gains touch screen support and some related fixes.
* Follow up series of patches removing the now redundant
iio_sw_buffer_preenable calls.
* Lots of conversions to the new event registration methods.
* Another round of hmc5843 cleanups as that driver moves towards graduating
from staging.
* Make some SoC drivers buildable if COMPILE_TEST is used. Follow up fixes
for a few bits and bobs that revealed.
* Add explicit includes of linux/of.h to those drivers making us of linux/of.h
|
|
Since the buffer is accessed by userspace we can not just free the buffers
memory once we are done with it in kernel space. There might still be open file
descriptors and userspace still might be accessing the buffer. This patch adds
support for reference counting to the IIO buffers. When a buffer is created and
initialized its initial reference count is set to 1. Instead of freeing the
memory of the buffer the buffer's _free() function will drop that reference
again. But only after the last reference to the buffer has been dropped the
buffer the buffer's memory will be freed. The IIO device will take a reference
to its primary buffer. The patch adds a small helper function for this called
iio_device_attach_buffer() which will get a reference to the buffer and assign
the buffer to the IIO device. This function must be used instead of assigning
the buffer to the device by hand. The reference is only dropped once the IIO
device is freed and we can be sure that there are no more open file handles. A
reference to a buffer will also be taken whenever the buffer is active to avoid
the buffer being freed while data is still being send to it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Fix checkpatch.pl issues with sizeof *ring should be sizeof(*ring)
in sca3000_ring.c
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.
Previously, there were only strict_strtol(), strict_strtoul(),
strict_strtoull(), and strict_strtoll(). Thus, when converting
to the variables, only long, unsigned long, unsigned long long,
and long long can be used.
However, kstrto*() provides various functions handling all types
of variables. Therefore, the types of variables can be changed
properly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Use the new spi_sync_transfer() helper function instead of open-coding it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
|
|
Replace open-coded instances of getting a iio_dev struct from a device struct
with dev_to_iio_dev().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Step 1 in moving the IIO core out of staging.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In all existing cases, the calls are coming from a location where
the indio_dev is already available.
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
These callbacks should not be buffer instance specific.
Hence move them out of the buffer.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Has no remaining users.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Issue brought up by Lars-Peter Clausen. This is a varient of what
he suggested.
io/iio.h for driver stuff (has to include types.h)
Sub files for the bits drivers may or may not use
iio/sysfs.h
iio/buffer.h (contents of current buffer_generic.h)
(obviously anything offering events will need events.h as well)
iio/types.h for the enums that matter to both
iio_chan_type, iio_modifier
iio/events.h for the event code stuff
IIO_EVENT_CODE and friends. + everything in chrdev.h So this
is the stuff that userspace cares about.
Also include iio_event_type, iio_event_direction
Thus iio drivers include iio.h + as required
events.h
sysfs.h
buffer.h
in kernel users (once that interface is merged) will need inkern.h
which will pull in types.h
Userspace will need just events.h (which pulls in types.h) to get
everything they need to know about. Buffer userspace access doesn't
currently need any core defines. All information about the data
format is passed through sysfs.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
They aren't always ring buffers, so just use buffer for all naming.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Nothing in this file is specific to RING buffers so rename it.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
also, IIO_RING_HARDWARE_BUFFER -> IIO_BUFFER_HARDWARE
These aren't always rings so the naming should not imply that.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch set should bring all the attributes created outside
of chan_spec registration inline with the new abi.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The scan mask will be dynamically assigned in register, so don't
use it before that.
In adis16260 I've moved it as I know this driver has userspace code.
Same for sca3000 where it is cost free due to hardware buffer.
Can do that for the others, but in theory userspace code should always
have been checking these and setting them appropriately anyway!
V2: Clear default mask out of adis16400 as reported by Michael
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Sorry all, this one is very invasive, though the driver changes are
just trivial interface fixes. Not all done yet.
V2 - bring the sca3000 with us.
V3 - fix ade7758 bugs in conversion.
V4 - add ad5933
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Missing from the iio_chan_spec conversion patches.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Getting rid of messages that make it harder to spot important issues.
Some code removed that will be useful one day. Can put it back then.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Mechanical change.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
1) move a generic helper function out of ring_sw. It applies to other buffers as well.
2) Get rid of a lot of left over function definitions.
3) Move all the access functions into static structures.
4) Introduce and use a static structure for the setup functions, preenable etc.
Some driver conversions thanks to Michael Hennerich (pulled out of patches
that would otherwise sit after this).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
in all buffer implementations.
This element has been usused by the core for quite some time. sca3000 set it none the less
until the rewrite in the previous patch (and hence didn't work).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
from buffer
Fairly substantial rewrite as the code had bitrotted.
A rethink is needed for how to handle variable types in the new chan_spec world.
This patch restores sca3000 buffer usage to a working state.
V3: Rebase fixups.
V2: Move to new version of IIO_CHAN macro
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
part of sca3000 driver temporarily disabled (buffer won't run
anyway). This section is replaced later in this patch set.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Whilst it is possible to output events to say buffers have passed
a particular level there are no obvious reasons to actually do so.
The upshot of this patch is that buffers will only ever have
one threshold turned on at a time.
For now sca3000 has it's ring buffer effectively disabled.
Fixed later in series.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Change suggested by Arnd Bergmann, Related patch to remove
pointless (now) dead_offset parameter will have await
proper fix for the sca3000 driver. That depends on
some intermediate patches so may be a little while.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
The device found passed to the attr functions is that of the ring
buffer, not the the iio_dev so we need to bounce through one more
hop to get the right address.
Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|