summaryrefslogtreecommitdiff
path: root/drivers/target/target_core_internal.h
AgeCommit message (Collapse)Author
2017-07-06target: remove g_device_listMike Christie
g_device_list is no longer needed because we now use the idr code for lookups and seaches. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-07-06target: add helper to iterate over devicesMike Christie
This adds a wrapper around idr_for_each so the xcopy code can loop over the devices in the next patch. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-06-08target: Fix kref->refcount underflow in transport_cmd_finish_abortNicholas Bellinger
This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED when a fabric driver drops it's second reference from below the target_core_tmr.c based callers of transport_cmd_finish_abort(). Recently with the conversion of kref to refcount_t, this bug was manifesting itself as: [705519.601034] refcount_t: underflow; use-after-free. [705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs [705539.719111] ------------[ cut here ]------------ [705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51 Since the original kref atomic_t based kref_put() didn't check for underflow and only invoked the final callback when zero was reached, this bug did not manifest in practice since all se_cmd memory is using preallocated tags. To address this, go ahead and propigate the existing return from transport_put_cmd() up via transport_cmd_finish_abort(), and change transport_cmd_finish_abort() + core_tmr_handle_tas_abort() callers to only do their local target_put_sess_cmd() if necessary. Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: stable@vger.kernel.org # 3.14+ Tested-by: Gary Guo <ghg@datera.io> Tested-by: Chu Yuan Lin <cyl@datera.io> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-12-09target: Minimize #include directivesBart Van Assche
Remove superfluous #include directives from the include/target/*.h files. Add missing #include directives to other *.h and *.c files. Use forward declarations for structures where possible. This change reduces the build time for make M=drivers/target on my laptop from 27.1s to 18.7s or by about 30%. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
2016-07-20target: Fix ordered task target_setup_cmd_from_cdb exception hangNicholas Bellinger
If a command with a Simple task attribute is failed due to a Unit Attention, then a subsequent command with an Ordered task attribute will hang forever. The reason for this is that the Unit Attention status is checked for in target_setup_cmd_from_cdb, before the call to target_execute_cmd, which calls target_handle_task_attr, which in turn increments dev->simple_cmds. However, transport_generic_request_failure still calls transport_complete_task_attr, which will decrement dev->simple_cmds. In this case, simple_cmds is now -1. So when a command with the Ordered task attribute is sent, target_handle_task_attr sees that dev->simple_cmds is not 0, so it decides it can't execute the command until all the (nonexistent) Simple commands have completed. Reported-by: Michael Cyr <mikecyr@linux.vnet.ibm.com> Tested-by: Michael Cyr <mikecyr@linux.vnet.ibm.com> Reported-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-05-09target: make target db location configurableLee Duncan
This commit adds the read-write attribute "dbroot", in the top-level CONFIGFS (core) target directory, normally /sys/kernel/config/target. This attribute defaults to "/var/target" but can be changed by writing a new pathname string to it. Changing this attribute is only allowed when no fabric drivers are loaded and the supplied value specifies an existing directory. Target modules that care about the target database root directory will be modified to use this attribute in a future commit. Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Add target_alloc_session() w/ callback helper for doing se_session allocation + tag + se_node_acl lookup. (HCH + nab) - Tree-wide fabric driver conversion to use target_alloc_session() - Convert sbp-target to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Chris Boot + nab) - Convert usb-gadget to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Andrzej Pietrasiewicz + nab) - Convert xen-scsiback to use percpu_ida tag pre-allocation, and TARGET_SCF_ACK_KREF I/O krefs (Juergen Gross + nab) - Convert tcm_fc to use TARGET_SCF_ACK_KREF I/O + TMR krefs - Convert ib_srpt to use percpu_ida tag pre-allocation - Add DebugFS node for qla2xxx target sess list (Quinn) - Rework iser-target connection termination (Jenny + Sagi) - Convert iser-target to new CQ API (HCH) - Add pass-through WRITE_SAME support for IBLOCK (Mike Christie) - Introduce data_bitmap for asynchronous access of data area (Sheng Yang + Andy) - Fix target_release_cmd_kref shutdown comp leak (Himanshu Madhani) Also, there is a separate PULL request coming for cxgb4 NIC driver prerequisites for supporting hw iscsi segmentation offload (ISO), that will be the base for a number of v4.7 developments involving iscsi-target hw offloads" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (36 commits) target: Fix target_release_cmd_kref shutdown comp leak target: Avoid DataIN transfers for non-GOOD SAM status target/user: Report capability of handling out-of-order completions to userspace target/user: Fix size_t format-spec build warning target/user: Don't free expired command when time out target/user: Introduce data_bitmap, replace data_length/data_head/data_tail target/user: Free data ring in unified function target/user: Use iovec[] to describe continuous area target: Remove enum transport_lunflags_table target/iblock: pass WRITE_SAME to device if possible iser-target: Kill the ->isert_cmd back pointer in struct iser_tx_desc iser-target: Kill struct isert_rdma_wr iser-target: Convert to new CQ API iser-target: Split and properly type the login buffer iser-target: Remove ISER_RECV_DATA_SEG_LEN iser-target: Remove impossible condition from isert_wait_conn iser-target: Remove redundant wait in release_conn iser-target: Rework connection termination iser-target: Separate flows for np listeners and connections cma events iser-target: Add new state ISER_CONN_BOUND to isert_conn ...
2016-03-10target: Remove enum transport_lunflags_tableAndy Grover
se_dev_entry.lun_flags and se_lun.lun_access are only used for keeping track of read-write vs. read-only state. Since this is an either/or thing we can represent it as bool, and remove the unneeded enum transport_lunflags_table, which is left over from when there were more flags. Change code that uses this enum to just use true/false, and make it clear through variable and param names that true means read-only, false means read-write. Signed-off-by: Andy Grover <agrover@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-06configfs: switch ->default groups to a linked listChristoph Hellwig
Replace the current NULL-terminated array of default groups with a linked list. This gets rid of lots of nasty code to size and/or dynamically allocate the array. While we're at it also provide a conveniant helper to remove the default groups. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget] Acked-by: Joel Becker <jlbec@evilplan.org> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
2016-02-06target: Drop legacy se_cmd->task_stop_comp + REQUEST_STOP usageNicholas Bellinger
With CMD_T_FABRIC_STOP + se_cmd->cmd_wait_set usage in place, go ahead and drop left-over CMD_T_REQUEST_STOP checks in target_complete_cmd() and unused target_stop_cmd(). Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-10-13target: use per-attribute show and store methodsChristoph Hellwig
This also allows to remove the target-specific old configfs macros, and gets rid of the target_core_fabric_configfs.h header which only had one function declaration left that could be moved to a better place. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-23target: remove target_core_configfs.hChristoph Hellwig
The remaining defintions are private to the target core and can be merged into target_core_internal.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-15target: use 64-bit LUNsHannes Reinecke
As we're now using a list to hold the LUNs the target core can now converted to use 64-bit LUNs internally. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: Subsume se_port + t10_alua_tg_pt_gp_member into se_lunChristoph Hellwig
This patch eliminates all se_port + t10_alua_tg_pt_gp_member usage, and converts current users to direct se_lun pointer dereference. This includes the removal of core_export_port(), core_release_port() core_dev_export() and core_dev_unexport(). Along with conversion of special case se_lun pointer dereference within PR ALL_TG_PT=1 and ALUA access state transition UNIT_ATTENTION handling. Also, update core_enable_device_list_for_node() to reference the new per se_lun->lun_deve_list when creating a new entry, or replacing an existing one via RCU. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: Simplify LUN shutdown codeBart Van Assche
Instead of starting a thread from transport_clear_lun_ref() that waits for LUN shutdown, wait in that function for LUN shutdown to finish. Additionally, change the return type of transport_clear_lun_ref() from int to void. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: simplify backend driver registrationChristoph Hellwig
Rewrite the backend driver registration based on what we did to the fabric drivers: introduce a read-only struct target_bakckend_ops that the driver registers, which is then instanciate as a struct target_backend by the core. This allows the ops vector to be smaller and allows us to mark it const. At the same time the registration function can set up the configfs attributes, avoiding the need to add additional boilerplate code for that to the drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: Only reset specific dynamic entries during lun_group creationNicholas Bellinger
This patch changes core_tpg_add_node_to_devs() to avoid unnecessarly resetting every se_dev_entry in se_node_acl->tpg_lun_hlist when the operation is driven by an explicit configfs se_lun->lun_group creation via core_dev_add_lun() to only update a single se_lun. Otherwise for the second core_tpg_check_initiator_node_acl() case, go ahead and continue to scan the full set of currently active se_lun in se_portal_group->tpg_lun_hlist. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: Convert se_portal_group->tpg_lun_list[] to RCU hlistNicholas Bellinger
This patch converts the fixed size se_portal_group->tpg_lun_list[] to use modern RCU with hlist_head in order to support an arbitary number of se_lun ports per target endpoint. It includes dropping core_tpg_alloc_lun() from core_dev_add_lun(), and calling it directly from target_fabric_make_lun() to allocate a new se_lun. And add a new target_fabric_port_release() configfs item callback to invoke kfree_rcu() to release memory during se_lun->lun_group shutdown. Also now that se_node_acl->lun_entry_hlist is using RCU, convert existing tpg_lun_lock to struct mutex so core_tpg_add_node_to_devs() can perform RCU updater logic without releasing ->tpg_lun_mutex. Also, drop core_tpg_clear_object_luns() and it's single consumer in iscsi-target, which is duplicating TPG LUN shutdown logic and is current code results in a NOP. Finally, sbp-target and xen-scsiback fabric driver conversions are included, which are required due to the non-standard way they use ->tpg_lun_hlist. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Chris Boot <bootc@bootc.net> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-06-01target: Convert se_node_acl->device_list[] to RCU hlistNicholas Bellinger
This patch converts se_node_acl->device_list[] table for mappedluns to modern RCU hlist_head usage in order to support an arbitrary number of node_acl lun mappings. It converts transport_lookup_*_lun() fast-path code to use RCU read path primitives when looking up se_dev_entry. It adds a new hlist_head at se_node_acl->lun_entry_hlist for this purpose. For transport_lookup_cmd_lun() code, it works with existing per-cpu se_lun->lun_ref when associating se_cmd with se_lun + se_device. Also, go ahead and update core_create_device_list_for_node() + core_free_device_list_for_node() to use ->lun_entry_hlist. It also converts se_dev_entry->pr_ref_count access to use modern struct kref counting, and updates core_disable_device_list_for_node() to kref_put() and block on se_deve->pr_comp waiting for outstanding PR special-case PR references to drop, then invoke kfree_rcu() to wait for the RCU grace period to complete before releasing memory. So now that se_node_acl->lun_entry_hlist fast path access uses RCU protected pointers, go ahead and convert remaining non-fast path RCU updater code using ->lun_entry_lock to struct mutex to allow callers to block while walking se_node_acl->lun_entry_hlist. Finally drop the left-over core_clear_initiator_node_from_tpg() that originally cleared lun_access during se_node_acl shutdown, as post RCU conversion it now becomes duplicated logic. Reviewed-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: move transport ID handling to the coreChristoph Hellwig
Now that struct se_portal_group contains a protocol identifier field we can take all the code to format an parse protocol identifiers in CDBs into common code instead of leaving this to low-level drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: refactor init/drop_nodeacl methodsChristoph Hellwig
By always allocating and adding, respectively removing and freeing the se_node_acl structure in core code we can remove tons of repeated code in the init_nodeacl and drop_nodeacl routines. Additionally this now respects the get_default_queue_depth method in this code path as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: fix DPO and FUA bit checksChristoph Hellwig
Drivers may override the WCE flag, in which case the DPOFUA flag in MODE SENSE might differ from the check used to reject invalid FUA bits in sbc_check_dpofua. Also now that we reject invalid FUA bits early there is no need to duplicate the same buggy check down in the fileio code. As the DPOFUA flag controls th support for FUA bits on read and write commands as well as DPO key off all the checks off a single helper, and deprecate the emulate_dpo and emulate_fua_read attributs. This fixes various failures in the libiscsi testsuite. Personally I'd prefer to also remove the emulate_fua_write attribute as there is no good reason to disable it, but I'll leave that for a separate discussion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-05-30target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystemChristoph Hellwig
There is just one configfs subsystem in the target code, so we might as well add two helpers to reference / unreference it from the core code instead of passing pointers to it around. This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e6, where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would fail, because the assignment from the original target_core_subsystem[] is no longer happening at target_register_template() time. (Fix target_core_exit_configfs pointer dereference - Sagi) Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2015-03-26target: move external declarations to a headersChristoph Hellwig
We should not declare extrnal .c symbols in C files to make sure they match the actual prototype, and sparse correctly warns about this. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-12-01target: Add EXPORT_SYMBOL for existing se_dev_set_*Nicholas Bellinger
Now that target_core_backend_configfs.h macros will be using these se_dev_set attribute functions externally to allow backend drivers to populate different attributes, go ahead and add EXPORT_SYMBOL() for the existing default set of 30 device attributes. Also update target_core_backend.h with proper function prototypes. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-04target: Add force_pr_aptpl device attributeNicholas Bellinger
This patch adds a force_pr_aptpl device attribute used to force SPC-3 PR Activate Persistence across Target Power Loss (APTPL) operation. This makes PR metadata write-out occur during state change regardless if new PERSISTENT_RESERVE_OUT CDBs have their APTPL feature bit set. This is useful during H/A failover in active/passive setups where all PR state is being re-created on a different node, driven by configfs backend device + export layout and pre-loaded $DEV/pr/res_aptpl_metadata. Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01target: Change core_dev_del_lun to take a se_lun instead of unpacked_lunAndy Grover
Remove core_tpg_pre_dellun entirely, since we don't need to get/check a pointer we already have. Nothing else can return an error, so core_dev_del_lun can return void. Rename core_tpg_post_dellun to remove_lun - a clearer name, now that pre_dellun is gone. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-10-01target: core_tpg_post_dellun can return voidAndy Grover
Nothing in it can raise an error. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-18target/configfs: Expose protection device attributesNicholas Bellinger
This patch adds support for exposing DIF protection device attributes via configfs. This includes: pi_prot_type: Protection Type (0, 1, 3 currently support) pi_prot_format: Protection Format Operation (FILEIO only) Within se_dev_set_pi_prot_type() it also adds the se_subsystem_api device callbacks to setup per device protection information. v2 changes: - Drop pi_guard_type + pi_prot_version related code (MKP) - Add pi_prot_format logic (Sagi) - Add ->free_prot callback in target_free_device - Add hw_pi_prot_type read-only attribute Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-16target: Don't use void* when passing dev in core_tpg_add_lunAndy Grover
Especially since it's actually a device. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-12-16target: Rename core_tpg_{pre,post}_addlun for clarityAndy Grover
"pre" is really an allocation function. The only time it isn't called is for virtual_lun0, which is statically allocated. Renaming that to "alloc" lets the other function not need to be "post", and just be called core_tpg_add_lun. (nab: fix minor applying fuzz in core_tpg_setup_virtual_lun0) Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-11-07target: Add percpu refcounting for se_lun accessNicholas Bellinger
This patch adds percpu refcounting for se_lun access that allows the association of an se_lun + se_cmd in transport_lookup_cmd_lun() to occur without an extra list_head for tracking outstanding I/O during se_lun shutdown. This effectively changes se_lun shutdown logic to wait for outstanding I/O percpu references to complete in transport_lun_remove_cmd() using se_lun->lun_ref_comp, instead of explicitly draining the per se_lun command list and waiting for individual se_cmd descriptor processing to complete. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-10-23target: Export symbol core_tpg_check_initiator_node_aclThomas Glanzmann
Export symbol core_tpg_check_initiator_node_acl and move prototype from the private drivers/target/target_core_internal.h to the public include/target/target_core_fabric.h Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-09-10target: Add Third Party Copy (3PC) bit in INQUIRY responseNicholas Bellinger
This patch adds the Third Party Copy (3PC) bit to signal support for EXTENDED_COPY within standard inquiry response data. Also add emulate_3pc device attribute in configfs (enabled by default) to allow the exposure of this bit to be disabled, if necessary. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-09-09target: Add MAXIMUM COMPARE AND WRITE LENGTH in Block Limits VPDNicholas Bellinger
This patch adds the MAXIMUM COMPARE AND WRITE LENGTH bit, currently hardcoded to a single logical block (NoLB=1) within the Block Limits VPD in spc_emulate_evpd_b0(). Also add emulate_caw device attribute in configfs (enabled by default) to allow the exposure of this bit to be disabled, if necessary. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-05-03target: Remove unused struct members in se_dev_entryAndy Grover
Some were incremented, but never used anywhere from what I could tell. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-18target: Fix lookup of dynamic NodeACLs during cached demo-mode operationNicholas Bellinger
This patch fixes a bug in core_tpg_check_initiator_node_acl() -> core_tpg_get_initiator_node_acl() where a dynamically created se_node_acl generated during session login would be skipped during subsequent lookup due to the '!acl->dynamic_node_acl' check, causing a new se_node_acl to be created with a duplicate ->initiatorname. This would occur when a fabric endpoint was configured with TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1 preventing the release of an existing se_node_acl during se_session shutdown. Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl() within core_dev_init_initiator_node_lun_acl() that originally required the extra '!acl->dynamic_node_acl' check, and just pass the configfs provided se_node_acl pointer instead. Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-02-13target: Add device attribute to expose config_item_name for INQUIRY modelTregaron Bayly
This patch changes LIO to use the configfs backend device name as the model if you echo '1' to an individual device's emulate_model_alias attribute. This is a valid operation only on devices with an export count of 0. Signed-off-by: Tregaron Bayly <tbayly@bluehost.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-15target: Add/check max_write_same_len device attribute + update block limits VPDNicholas Bellinger
This patch adds a new max_write_same_len device attribute for use with WRITE_SAME w/ UNMAP=0 backend emulation. This can be useful for lowering the default backend value (IBLOCK uses 0xFFFF). Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated WRITE_SAME w/ UNMAP=0 cases. (Robert: Move max_write_same_len check in sbc_setup_write_same() to check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases) Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: pass sense_reason as a return valueChristoph Hellwig
Pass the sense reason as an explicit return value from the I/O submission path instead of storing it in struct se_cmd and using negative return values. This cleans up a lot of the code pathes, and with the sparse annotations for the new sense_reason_t type allows for much better error checking. (nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use sense_reason_t with Roland's MODE SELECT changes) Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: move REPORT LUNS emulation to target_core_spc.cChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-11-06target: kill struct se_subsystem_devChristoph Hellwig
Simplify the code a lot by killing the superflous struct se_subsystem_dev. Instead se_device is allocated early on by the backend driver, which allocates it as part of its own per-device structure, borrowing the scheme that is for example used for inode allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: refactor core_update_device_list_for_node()Andy Grover
Code was almost entirely divided based on value of bool param "enable". Split it into two functions. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: Remove hba param from core_dev_add_lunAndy Grover
Only used in a debugprint, and function signature is cleaner now. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: remove the execute listChristoph Hellwig
Since "target: Drop se_device TCQ queue_depth usage from I/O path" we always submit all commands (or back then, tasks) from __transport_execute_tasks. That means the the execute list has lots its purpose, as we can simply submit the commands that are restarted in transport_complete_task_attr directly while we walk the list. In fact doing so also solves a race in the way it currently walks to delayed_cmd_list as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: move code for CDB emulationChristoph Hellwig
Move the existing code in target_core_cdb.c into the files for the command sets that the emulations implement. (roland + nab: Squash patch: Fix range calculation in WRITE SAME emulation when num blocks == 0s) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: add a parse_cdb method to the backend driversChristoph Hellwig
Instead of trying to handle all SCSI command sets in one function (transport_generic_cmd_sequencer) call out to the backend driver to perform this functionality. For pSCSI a copy of the existing code is used, but for all virtual backends we can use a new parse_sbc_cdb helper is used to provide a simple SBC emulation. For now this setups means a fair amount of duplication between pSCSI and the SBC library, but patches later in this series will sort out that problem. (nab: Fix up build failure in target_core_pscsi.c) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-07-16target: split parsing of SPC commands into a separate helperChristoph Hellwig
(nab: Add EXPORT_SYMBOL usage for spc_parse_cdb) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: move the state and execute lists to the commandChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-05-06target: replace ->execute_task with ->execute_cmdChristoph Hellwig
Make CDB emulation work on commands instead of tasks again as a preparation of removing tasks completely. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>