summaryrefslogtreecommitdiff
path: root/drivers/target/target_core_xcopy.h
AgeCommit message (Collapse)Author
2021-01-11scsi: target: Fix XCOPY NAA identifier lookupDavid Disseldorp
When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: use the stack for XCOPY passthrough cmdsDavid Disseldorp
Reads and writes in the XCOPY loop are synchronous, so needn't be heap allocated / freed with each loop. Link: https://lore.kernel.org/r/20200327141954.955-6-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: increase XCOPY I/O sizeDavid Disseldorp
The I/O size is already bound by dev_attrib.hw_max_sectors, so increase the hardcoded XCOPY_MAX_SECTORS maximum to improve performance against backstores with high-latency. Link: https://lore.kernel.org/r/20200327141954.955-5-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: avoid per-loop XCOPY buffer allocationsDavid Disseldorp
The main target_xcopy_do_work() loop unnecessarily allocates an I/O buffer with each synchronous READ / WRITE pair. This commit significantly reduces allocations by reusing the XCOPY I/O buffer when possible. Link: https://lore.kernel.org/r/20200327141954.955-4-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-03-29scsi: target: drop xcopy DISK BLOCK LENGTH debugDavid Disseldorp
The DISK BLOCK LENGTH field is carried with XCOPY target descriptors on the wire, but is currently unmarshalled during 0x02 segment descriptor passing. The unmarshalled value is currently unused, so drop it. Link: https://lore.kernel.org/r/20200327141954.955-3-ddiss@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10target: check for XCOPY parameter truncationDavid Disseldorp
Check for XCOPY header, CSCD descriptor and segment descriptor list truncation, and respond accordingly. SPC4r37 6.4.1 EXTENDED COPY(LID4) states (also applying to LID1 reqs): If the parameter list length causes truncation of the parameter list, then the copy manager shall transfer no data and shall terminate the EXTENDED COPY command with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to PARAMETER LIST LENGTH ERROR. This behaviour can be tested using the libiscsi ExtendedCopy.ParamHdr test. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2017-01-10target: check XCOPY segment descriptor CSCD IDsDavid Disseldorp
Ensure that the segment descriptor CSCD descriptor ID values correspond to CSCD descriptor entries located in the XCOPY command parameter list. SPC4r37 6.4.6.1 Table 150 specifies this range as 0000h to 07FFh, where the CSCD descriptor location in the parameter list can be located via: 16 + (id * 32) Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> [ bvanassche: inserted "; " in the format string of an error message and also moved a "||" operator from the start of a line to the end of the previous line ] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
2016-12-09target: Minimize #include directivesBart Van Assche
Remove superfluous #include directives from the include/target/*.h files. Add missing #include directives to other *.h and *.c files. Use forward declarations for structures where possible. This change reduces the build time for make M=drivers/target on my laptop from 27.1s to 18.7s or by about 30%. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
2013-09-10target: Add support for EXTENDED_COPY copy offload emulationNicholas Bellinger
This patch adds support for EXTENDED_COPY emulation from SPC-3, that enables full copy offload target support within both a single virtual backend device, and across multiple virtual backend devices. It also functions independent of target fabric, and supports copy offload across multiple target fabric ports. This implemenation supports both EXTENDED_COPY PUSH and PULL models of operation, so the actual CDB may be received on either source or desination logical unit. For Target Descriptors, it currently supports the NAA IEEE Registered Extended designator (type 0xe4), which allows the reference of target ports to occur independent of fabric type using EVPD 0x83 WWNs. For Segment Descriptors, it currently supports copy from block to block (0x02) mode. It also honors any present SCSI reservations of the destination target port. Note that only Supports No List Identifier (SNLID=1) mode is supported. Also included is basic RECEIVE_COPY_RESULTS with service action type OPERATING PARAMETERS (0x03) required for SNLID=1 operation. v3 changes: - Fix incorrect return type in target_do_receive_copy_results() (Fengguang) v2 changes: - Use target_alloc_sgl() instead of transport_generic_get_mem() - Convert debug output to use pr_debug() - Convert target_xcopy_parse_target_descriptors() NAA IEEN WWN dump to use 0x%16phN format specification - Drop unnecessary xcopy_pt_cmd->xpt_passthrough_wsem, and associated usage in xcopy_pt_write_pending() and target_xcopy_issue_pt_cmd() - Add check for unsupported EXTENDED_COPY(LID4) service action bits in target_do_xcopy() Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Roland Dreier <roland@purestorage.com> Cc: Zach Brown <zab@redhat.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>