| Age | Commit message (Collapse) | Author |
|---|
|
The error path while failing to register devices on the TEE bus has a
bug leading to kernel panic as follows:
[ 15.398930] Unable to handle kernel paging request at virtual address ffff07ed00626d7c
[ 15.406913] Mem abort info:
[ 15.409722] ESR = 0x0000000096000005
[ 15.413490] EC = 0x25: DABT (current EL), IL = 32 bits
[ 15.418814] SET = 0, FnV = 0
[ 15.421878] EA = 0, S1PTW = 0
[ 15.425031] FSC = 0x05: level 1 translation fault
[ 15.429922] Data abort info:
[ 15.432813] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 15.438310] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 15.443372] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 15.448697] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000d9e3e000
[ 15.455413] [ffff07ed00626d7c] pgd=1800000bffdf9003, p4d=1800000bffdf9003, pud=0000000000000000
[ 15.464146] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Commit 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration")
lead to the introduction of this bug. So fix it appropriately.
Reported-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218542
Fixes: 7269cba53d90 ("tee: optee: Fix supplicant based device enumeration")
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Pull documentation update from Jonathan Corbet:
"Another moderately busy cycle for documentation, including:
- The minimum Sphinx requirement has been raised to 2.4.4, following
a warning that was added in 6.2
- Some reworking of the Documentation/process front page to,
hopefully, make it more useful
- Various kernel-doc tweaks to, for example, make it deal properly
with __counted_by annotations
- We have also restored a warning for documentation of nonexistent
structure members that disappeared a while back. That had the
delightful consequence of adding some 600 warnings to the docs
build. A sustained effort by Randy, Vegard, and myself has
addressed almost all of those, bringing the documentation back into
sync with the code. The fixes are going through the appropriate
maintainer trees
- Various improvements to the HTML rendered docs, including automatic
links to Git revisions and a nice new pulldown to make translations
easy to access
- Speaking of translations, more of those for Spanish and Chinese
... plus the usual stream of documentation updates and typo fixes"
* tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits)
MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL
A reworked process/index.rst
ring-buffer/Documentation: Add documentation on buffer_percent file
Translated the RISC-V architecture boot documentation.
Docs: remove mentions of fdformat from util-linux
Docs/zh_CN: Fix the meaning of DEBUG to pr_debug()
Documentation: move driver-api/dcdbas to userspace-api/
Documentation: move driver-api/isapnp to userspace-api/
Documentation/core-api : fix typo in workqueue
Documentation/trace: Fixed typos in the ftrace FLAGS section
kernel-doc: handle a void function without producing a warning
scripts/get_abi.pl: ignore some temp files
docs: kernel_abi.py: fix command injection
scripts/get_abi: fix source path leak
CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer
docs: translations: add translations links when they exist
kernel-doc: Align quick help and the code
MAINTAINERS: add reviewer for Spanish translations
docs: ignore __counted_by attribute in structure definitions
scripts: kernel-doc: Clarify missing struct member description
..
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
OP-TEE cleanup
- Remove a redundant custom workqueue in the OP-TEE driver.
- Fix a missing description of an argument to optee_handle_rpc().
* tag 'optee-cleanup-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add missing description of RPC argument reference
tee: optee: Remove redundant custom workqueue
tee: optee: Fix supplicant based device enumeration
Link: https://lore.kernel.org/r/20231214132237.GA3092763@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
OP-TEE kernel private shared memory optimizations
Optimize OP-TEE driver private shared memory allocated as dynamic shared
memory. Both to handle larger than one page allocations and for more
efficient memory usage.
* tag 'kern-priv-shm-for-v6.8' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: allocate shared memory with alloc_pages_exact()
optee: add page list to kernel private shared memory
Link: https://lore.kernel.org/r/20231211115815.GA616539@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Adds missing inline description comment for RPC optional arguments
reference.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202310192021.fvb6JDOY-lkp@intel.com/
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Add a separate documentation directory for TEE subsystem since it is a
standalone subsystem which already offers devices consumed by multiple
different subsystem drivers.
Split overall TEE subsystem documentation modularly where:
- The userspace API has been moved to Documentation/userspace-api/tee.rst.
- The driver API has been moved to Documentation/driver-api/tee.rst.
- The first module covers the overview of TEE subsystem.
- The further modules are dedicated to different TEE implementations like:
- OP-TEE
- AMD-TEE
- and so on for future TEE implementation support.
Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231128072352.866859-1-sumit.garg@linaro.org
|
|
Allocate memory to share with the secure world using alloc_pages_exact()
instead of alloc_pages() for more efficient memory usage.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Until now has kernel private shared memory allocated as dynamic shared
memory (not from the static shared memory pool) been returned without a
list of physical pages on allocations via RPC. To support allocations
larger than one page add a list of physical pages.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds support for asynchronous notifications from OP-TEE in secure world
when communicating via FF-A. In principle from OP-TEE and kernel driver
point of view this works in the same way as for the SMC ABI based
implementation.
The OP-TEE FF-A ABI is expanded in OPTEE_FFA_EXCHANGE_CAPABILITIES with
the capability OPTEE_FFA_SEC_CAP_ASYNC_NOTIF to indicate that OP-TEE
supports asynchronous notifications. OPTEE_FFA_ENABLE_ASYNC_NOTIF is
also added to tell that the driver has successfully initialized these
notifications.
Notification capability is negotiated while the driver is initialized.
If both sides supports these notifications then they are enabled.
The notification concept in this driver is merged with the FF-A concept,
the lower 64 values are reserved for FF-A as asynchronous notifications
while the synchronous notifications use the higher values.
So a FF-A notification has to be allocated for each discrete
asynchronous notification value needed. Only one asynchronous
notification value is used at the moment, the "do bottom half"
notification.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Provides optee_do_bottom_half() and optee_stop_async_notif() as common
functions callable from the FF-A ABI part of the driver too.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
|
|
Adds support in the OP-TEE driver to keep track of reserved system
threads. The logic allows one OP-TEE thread to be reserved to TEE system
sessions.
The optee_cq_*() functions are updated to handle this if enabled,
that is when TEE describes how many thread context it supports
and when at least 1 session has registered as a system session
(using tee_client_system_session()).
For sake of simplicity, initialization of call queue management
is factorized into new helper function optee_cq_init().
The SMC ABI part of the driver enables this tracking, but the
FF-A ABI part does not.
Co-developed-by: Jens Wiklander <jens.wiklander@linaro.org>
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds an argument to do_call_with_arg() handler to tell whether the call
is a system thread call or not. This change always sets this info to false
hence no functional change.
This change prepares management of system invocation proposed in a later
change.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
[jw: clarified that it's system thread calls]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Global system workqueue is sufficient to suffice OP-TEE bus scanning work
needs. So drop redundant usage of the custom workqueue.
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Currently supplicant dependent optee device enumeration only registers
devices whenever tee-supplicant is invoked for the first time. But it
forgets to remove devices when tee-supplicant daemon stops running and
closes its context gracefully. This leads to following error for fTPM
driver during reboot/shutdown:
[ 73.466791] tpm tpm0: ftpm_tee_tpm_op_send: SUBMIT_COMMAND invoke error: 0xffff3024
Fix this by adding an attribute for supplicant dependent devices so that
the user-space service can detect and detach supplicant devices before
closing the supplicant:
$ for dev in /sys/bus/tee/devices/*; do if [[ -f "$dev/need_supplicant" && -f "$dev/driver/unbind" ]]; \
then echo $(basename "$dev") > $dev/driver/unbind; fi done
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://github.com/OP-TEE/optee_os/issues/6094
Fixes: 5f178bb71e3a ("optee: enable support for multi-stage bus enumeration")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
[jw: fixed up Date documentation]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Commit 4fb0a5eb364d ("tee: add OP-TEE driver") declared but never implemented
optee_supp_read()/optee_supp_write().
Commit 967c9cca2cc5 ("tee: generic TEE subsystem") never implemented tee_shm_init().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
Use kmemdup rather than duplicating its implementation.
./drivers/tee/optee/smc_abi.c:1542:12-19: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5480
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fixes an uninitialized variable in OP-TEE driver
* tag 'optee-async-notif-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: fix uninited async notif value
Link: https://lore.kernel.org/r/20230421075443.GA3136581@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"The most notable updates this time are for Qualcomm Snapdragon
platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
and a number of drivers now support additional Snapdragon variants, in
particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
(edac) and rpm drivers get notable functionality updates.
Updates on other platforms include:
- Various updates to the Mediatek mutex and mmsys drivers, including
support for the Helio X10 SoC
- Support for unidirectional mailbox channels in Arm SCMI firmware
- Support for per cpu asynchronous notification in OP-TEE firmware
- Minor updates for memory controller drivers.
- Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
obsolete DT driver interfaces"
* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: ti: smartreflex: Simplify getting the opam_sr pointer
bus: vexpress-config: Add explicit of_platform.h include
soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
memory: mtk-smi: mt8365: Add SMI Support
dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
memory: tegra: read values from correct device
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
soc/tegra: fuse: Remove nvmem root only access
soc/tegra: cbb: tegra194: Use of_address_count() helper
soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
ARM: tegra: Remove MODULE_LICENSE in non-modules
soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
soc: tegra: cbb: Drop empty platform remove function
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
...
|
|
Fixes an uninitialized variable in irq_handler() that could lead to
unpredictable behavior in case OP-TEE fails to handle SMC function ID
OPTEE_SMC_GET_ASYNC_NOTIF_VALUE. This change ensures that in that case
get_async_notif_value() properly reports there are no notification
event.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/202304200755.OoiuclDZ-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/all/d9b7f69b-c737-4cb3-8e74-79fe00c934f9@kili.mountain/
Fixes: 6749e69c4dad ("optee: add asynchronous notifications")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
Add SMC for OP-TEE image loading
Adds an SMC call for loading OP-TEE by the kernel.
* tag 'optee-load-for-v6.4' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: Add SMC for loading OP-TEE image
Link: https://lore.kernel.org/r/20230405062701.GA3391925@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Adds an SMC call that will pass an OP-TEE binary image to EL3 and
instruct it to load it as the BL32 payload. This works in conjunction
with a feature added to Trusted Firmware for ARMv8 and above
architectures that supports this.
The main purpose of this change is to facilitate updating the OP-TEE
component on devices via a rootfs change rather than having to do a
firmware update. Further details are linked to in the Kconfig file.
Signed-off-by: Jeffrey Kardatzke <jkardatzke@chromium.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jeffrey Kardatzke <jkardatzke@google.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Implements use of per-cpu irq for optee asynchronous notification.
Existing optee async notif implementation allows OP-TEE world to
raise an interrupt on which Linux optee driver will query some pending
events. This change allows the signaling interrupt to be a per-cpu
interrupt as with Arm GIC PPIs. Using a PPI instead of an SPI is useful
when no GIC lines are provisioned in the chip design and there are spare
PPI lines.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Co-developed-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[JW: fixing a spell error in @notif_pcpu_wq description]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Fix typo Unuspported -> Unsupported
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are few major updates in the SoC specific drivers, mainly the
usual reworks and support for variants of the existing SoC. While this
remains Arm centric for the most part, the branch now also contains
updates to risc-v and loongarch specific code in drivers/soc/.
Notable changes include:
- Support for the newly added Qualcomm Snapdragon variants (MSM8956,
MSM8976, SM6115, SM4250, SM8150, SA8155 and SM8550) in the soc ID,
rpmh, rpm, spm and powerdomain drivers.
- Documentation for the somewhat controversial qcom,board-id
properties that are required for booting a number of machines
- A new SoC identification driver for the loongson-2 (loongarch)
platform
- memory controller updates for stm32, tegra, and renesas.
- a new DT binding to better describe LPDDR2/3/4/5 chips in the
memory controller subsystem
- Updates for Tegra specific drivers across multiple subsystems,
improving support for newer SoCs and better identification
- Minor fixes for Broadcom, Freescale, Apple, Renesas, Sifive, TI,
Mediatek and Marvell SoC drivers"
* tag 'soc-drivers-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (137 commits)
soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM6115 / SM4250 and variants
soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for SM8150 and SA8155
dt-bindings: soc: qcom: apr: document generic qcom,apr compatible
soc: qcom: Select REMAP_MMIO for ICC_BWMON driver
soc: qcom: Select REMAP_MMIO for LLCC driver
soc: qcom: rpmpd: Add SM4250 support
dt-bindings: power: rpmpd: Add SM4250 support
dt-bindings: soc: qcom: aoss: Add compatible for SM8550
soc: qcom: llcc: Add configuration data for SM8550
dt-bindings: arm: msm: Add LLCC compatible for SM8550
soc: qcom: llcc: Add v4.1 HW version support
soc: qcom: socinfo: Add SM8550 ID
soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response
soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets
soc: qcom: rpmhpd: Add SM8550 power domains
dt-bindings: power: rpmpd: Add SM8550 to rpmpd binding
soc: qcom: socinfo: Add MSM8956/76 SoC IDs to the soc_id table
dt-bindings: arm: qcom,ids: Add SoC IDs for MSM8956 and MSM8976
...
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
Add missing __init/__exit annotations to OP-TEE driver
* tag 'optee-for-6.2' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: Add __init/__exit annotations to module init/exit funcs
Link: https://lore.kernel.org/r/Y3d4CHWl3Ofx5OrX@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If device_register() returns error in optee_register_device(),
the name allocated by dev_set_name() need be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup(),
and optee_device is freed in optee_release_device().
Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Add missing __init/__exit annotations to module init/exit funcs.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
Use the VMA iterator instead. Change the calling convention of
__check_mem_type() to pass in the mm instead of the first vma in the
range.
Link: https://lkml.kernel.org/r/20220906194824.2110408-39-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation to make memory operations accessible for a non
ffa_driver/device, it is better to split the ffa_ops into different
categories of operations: info, message and memory. The info and memory
are ffa_device independent and can be used without any associated
ffa_device from a non ffa_driver.
However, we don't export these info and memory APIs yet without the user.
The first users of these APIs can export them.
Link: https://lore.kernel.org/r/20220907145240.1683088-11-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Except the message APIs, all other APIs are ffa_device independent and can
be used without any associated ffa_device from a non ffa_driver.
In order to reflect the same, just rename ffa_dev_ops as ffa_ops to
avoid any confusion or to keep it simple.
Link: https://lore.kernel.org/r/20220907145240.1683088-8-sudeep.holla@arm.com
Suggested-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
There is a requirement to make memory APIs independent of the ffa_device.
One of the use-case is to have a common memory driver that manages the
memory for all the ffa_devices. That common memory driver won't be a
ffa_driver or won't have any ffa_device associated with it. So having
these memory APIs accessible without a ffa_device is needed and should
be possible as most of these are handled by the partition manager(SPM
or hypervisor).
Drop the ffa_device argument to the memory APIs and make them ffa_device
independent.
Link: https://lore.kernel.org/r/20220907145240.1683088-7-sudeep.holla@arm.com
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Now that the ffa_device structure holds the pointer to ffa_dev_ops,
there is no need to obtain the same through ffa_dev_ops_get().
Just use the ffa_dev->ops directly. Since the ffa_device itself carries
ffa_dev_ops now, there is no need to keep a copy in optee_ffa structure.
Drop ffa_ops in the optee_ffa structure as it is not needed anymore.
Link: https://lore.kernel.org/r/20220907145240.1683088-3-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
file: ./drivers/tee/optee/optee_smc.h
line: 192
* a2 Size of of SHM
chanegd to
* a2 Size of SHM
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
In optee_smc_do_call_with_arg() there is a code path when the argument
struct for RPC is passed appended to the primary argument struct. When
the address of the RPC struct is retrieved there's an invalid check for
success. It should be 'rpc_arg' pass to IS_ERR/PTR_ERR().
Fixes: ed8faf6c8f8c ("optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
[jw: added background to the problem]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/late
Fix a compiler warning in OP-TEE driver
* tag 'optee-warning-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: Pass a pointer to virt_addr_valid()
Link: https://lore.kernel.org/r/20220530112612.GA1511426@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A pointer into virtual memory is represented by a (void *)
not an u32, so the compiler warns:
drivers/tee/optee/call.c:365:29: warning: passing argument 1
of 'virt_to_pfn' makes pointer from integer without a
cast [-Wint-conversion]
Fix this with an explicit cast.
Cc: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
[jw: fixed merge conflict]
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are minor updates to SoC specific drivers for chips by Rockchip,
Samsung, NVIDIA, TI, NXP, i.MX, Qualcomm, and Broadcom.
Noteworthy driver changes include:
- Several conversions of DT bindings to yaml format.
- Renesas adds driver support for R-Car V4H, RZ/V2M and RZ/G2UL SoCs.
- Qualcomm adds a bus driver for the SSC (Snapdragon Sensor Core),
and support for more chips in the RPMh power domains and the
soc-id.
- NXP has a new driver for the HDMI blk-ctrl on i.MX8MP.
- Apple M1 gains support for the on-chip NVMe controller, making it
possible to finally use the internal disks. This also includes SoC
drivers for their RTKit IPC and for the SART DMA address filter.
For other subsystems that merge their drivers through the SoC tree, we
have
- Firmware drivers for the ARM firmware stack including TEE, OP-TEE,
SCMI and FF-A get a number of smaller updates and cleanups. OP-TEE
now has a cache for firmware argument structures as an
optimization, and SCMI now supports the 3.1 version of the
specification.
- Reset controller updates to Amlogic, ASpeed, Renesas and ACPI
drivers
- Memory controller updates for Tegra, and a few updates for other
platforms"
* tag 'arm-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (159 commits)
memory: tegra: Add MC error logging on Tegra186 onward
memory: tegra: Add memory controller channels support
memory: tegra: Add APE memory clients for Tegra234
memory: tegra: Add Tegra234 support
nvme-apple: fix sparse endianess warnings
soc/tegra: pmc: Document core domain fields
soc: qcom: pdr: use static for servreg_* variables
soc: imx: fix semicolon.cocci warnings
soc: renesas: R-Car V3U is R-Car Gen4
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
soc: imx: imx8m-blk-ctrl: set power device name
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc/tegra: pmc: Select REGMAP
dt-bindings: reset: st,sti-powerdown: Convert to yaml
dt-bindings: reset: st,sti-picophyreset: Convert to yaml
dt-bindings: reset: socfpga: Convert to yaml
dt-bindings: reset: snps,axs10x-reset: Convert to yaml
...
|
|
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE RPC argument cache
Adds caching of the OP-TEE argument structure used to pass request to
secure world. This reduces quite a bit of unnecessary alloc/free and
possibly switching back and forth to secure work in order to register
the buffers in some configurations, most notably FF-A.
* tag 'optee-rpc-arg-for-v5.19' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: cache argument shared memory structs
optee: add FF-A capability OPTEE_FFA_SEC_CAP_ARG_OFFSET
optee: add OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG
optee: rename rpc_arg_count to rpc_param_count
Link: https://lore.kernel.org/r/20220504201759.GA180315@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
Arm FF-A firmware driver updates/fixes for v5.19
Couple of fixes to handle fragmented memory descriptors and incorrect
UUID parameter passed to ffa_partition_probe. Another fix deals with
the incorrect use of ffa_device's driver_data by the core driver.
Apart from these fixes, there is an addition of ffa_dev_get_drvdata helper
function and its use in optee driver.
* tag 'ffa-updates-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
tee: optee: Use ffa_dev_get_drvdata to fetch driver_data
firmware: arm_ffa: Add ffa_dev_get_drvdata helper function
firmware: arm_ffa: Remove incorrect assignment of driver_data
firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe
firmware: arm_ffa: Fix handling of fragmented memory descriptors
Link: https://lore.kernel.org/r/20220504112853.3491961-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Due to lack of an helper like ffa_dev_get_drvdata, this driver was
fetching driver_data directly accessing the structure member. Now that
we have added an helper, just use the same instead.
Link: https://lore.kernel.org/r/20220429113946.2087145-4-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Implements a cache to handle shared memory used to pass the argument
struct needed when doing a normal yielding call into secure world.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds the secure capability OPTEE_FFA_SEC_CAP_ARG_OFFSET to indicate that
OP-TEE with FF-A can support an argument struct at a non-zero offset into
a passed shared memory object.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Adds OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG where
the struct optee_msg_arg to be used for RPC is appended in the memory
following the normal argument struct optee_msg_arg. This is an
optimization to avoid caching the RPC argument struct while still
maintaining similar performance as if it was cached.
OPTEE_SMC_CALL_WITH_REGD_ARG optimized one step further by using a
registered shared memory object instead. It's in other aspects identical
to OPTEE_SMC_CALL_WITH_RPC_ARG.
The presence of OPTEE_SMC_CALL_WITH_RPC_ARG and
OPTEE_SMC_CALL_WITH_REGD_ARG is indicated by the new
OPTEE_SMC_SEC_CAP_RPC_ARG bit returned by
OPTEE_SMC_EXCHANGE_CAPABILITIES. OPTEE_SMC_EXCHANGE_CAPABILITIES also
reports the number of arguments that the RPC argument struct must have
room for.
OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_ARG can be used
interleaved with difference that when OPTEE_SMC_CALL_WITH_RPC_ARG is
used the RPC argument struct to be used is the one appended to the
normal argument struct. The same is true for
OPTEE_SMC_CALL_WITH_REGD_ARG.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Renames the field rpc_arg_count in struct optee to rpc_param_count.
Function parameter names and local variables are also renamed to match.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
The error handling code of optee_ffa_probe misses the mutex_destroy of
ffa.mutex when mutext_init succeeds.
Fix this by adding mutex_destory of ffa.mutex at the error handling part
Fixes: aceeafefff73 ("optee: use driver internal tee_context for some rpc")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
In some low-memory devices, it's hard to aquire large-orders pages,
this patch allowed user using scatter pages to register shm.
Signed-off-by: Phil Chang <phil.chang@mediatek.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
OP-TEE fix error return code in probe functions
* tag 'optee-fix2-for-v5.17' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: fix error return code in probe function
Link: https://lore.kernel.org/r/20220214125931.GA1332792@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
