summaryrefslogtreecommitdiff
path: root/drivers/tee
AgeCommit message (Collapse)Author
2020-09-26Merge tag 'tee-dev-cleanup-for-v5.10' of ↵Olof Johansson
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Simplify tee_device_register() and friends Uses cdev_device_add() instead of the cdev_add() device_add() combination. Initializes dev->groups instead of direct calls to sysfs_create_group() and friends. * tag 'tee-dev-cleanup-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: tee: avoid explicit sysfs_create/delete_group by initialising dev->groups tee: replace cdev_add + device_add with cdev_device_add Link: https://lore.kernel.org/r/20200918144130.GB1219771@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-18tee: avoid explicit sysfs_create/delete_group by initialising dev->groupsSudeep Holla
If the dev->groups is initialised, the sysfs group is created as part of device_add call. There is no need to call sysfs_create/delete_group explicitly. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-09-18tee: replace cdev_add + device_add with cdev_device_addSudeep Holla
Commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") added a helper function 'cdev_device_add'. Make use of cdev_device_add in tee_device_register to replace cdev_add and device_add. Since cdev_device_add takes care of setting the kobj->parent, drop explicit initialisation in tee_device_alloc. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-09-13Merge tag 'optee-i2c-fix-for-v5.10' of ↵Olof Johansson
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/drivers Make sure I2C functions used in OP-TEE are reachable with IS_REACHABLE() * tag 'optee-i2c-fix-for-v5.10' of git://git.linaro.org:/people/jens.wiklander/linux-tee: drivers: optee: fix i2c build issue Link: https://lore.kernel.org/r/20200901101806.GA3286324@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-01drivers: optee: fix i2c build issueJorge Ramirez-Ortiz
When the optee driver is compiled into the kernel while the i2c core is configured as a module, the i2c symbols are not available. This commit addresses the situation by disabling the i2c support for this use case while allowing it in all other scenarios: i2c=y, optee=y i2c=m, optee=m i2c=y, optee=m i2c=m, optee=y (not supported) Fixes: c05210ab9757 ("drivers: optee: allow op-tee to access devices on the i2c bus") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-08-27Merge tag 'tee-pin-user-pages-for-5.10' of ↵Olof Johansson
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Converts tee subsystem to use pin_user_pages() instead of get_user_pages() * tag 'tee-pin-user-pages-for-5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: convert get_user_pages() --> pin_user_pages() Link: https://lore.kernel.org/r/20200825090715.GA2370775@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-25tee: convert get_user_pages() --> pin_user_pages()John Hubbard
This code was using get_user_pages*(), in a "Case 2" scenario (DMA/RDMA), using the categorization from [1]. That means that it's time to convert the get_user_pages*() + put_page() calls to pin_user_pages*() + unpin_user_pages() calls. Factor out a new, small release_registered_pages() function, in order to consolidate the logic for discerning between TEE_SHM_USER_MAPPED and TEE_SHM_KERNEL_MAPPED pages. This also absorbs the kfree() call that is also required there. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ Cc: Jens Wiklander <jens.wiklander@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: tee-dev@lists.linaro.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-08-21Merge tag 'tee-memref-null-for-v5.10' of ↵Olof Johansson
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Handle NULL pointer indication from tee client Adds support to indicate NULL pointers instead of a valid buffer when querying the needed size of a buffer. * tag 'tee-memref-null-for-v5.10' of git://git.linaro.org/people/jens.wiklander/linux-tee: driver: tee: Handle NULL pointer indication from client Link: https://lore.kernel.org/r/20200821102535.GA1872111@jade Signed-off-by: Olof Johansson <olof@lixom.net>
2020-08-21drivers: optee: allow op-tee to access devices on the i2c busJorge Ramirez-Ortiz
Some secure elements like NXP's SE050 sit on I2C buses. For OP-TEE to control this type of cryptographic devices it needs coordinated access to the bus, so collisions and RUNTIME_PM dont get in the way. This trampoline driver allow OP-TEE to access them. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-08-21driver: tee: Handle NULL pointer indication from clientCedric Neveux
TEE Client introduce a new capability "TEE_GEN_CAP_MEMREF_NULL" to handle the support of the shared memory buffer with a NULL pointer. This capability depends on TEE Capabilities and driver support. Driver and TEE exchange capabilities at driver initialization. Signed-off-by: Michael Whitfield <michael.whitfield@nxp.com> Signed-off-by: Cedric Neveux <cedric.neveux@nxp.com> Reviewed-by: Joakim Bech <joakim.bech@linaro.org> Tested-by: Joakim Bech <joakim.bech@linaro.org> (QEMU) Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-07-13Merge tag 'optee-bus-for-v5.9' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Enable multi-stage OP-TEE bus enumeration Probes drivers on the OP-TEE bus in two steps. First for drivers which do not depend on tee-supplicant. After tee-supplicant has been started probe the devices which do depend on tee-supplicant. Also introduces driver which uses an OP-TEE based fTPM Trusted Application depends on tee-supplicant NV RAM implementation based on RPMB secure storage. * tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee: tpm_ftpm_tee: register driver on TEE bus optee: enable support for multi-stage bus enumeration optee: use uuid for sysfs driver entry Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-10optee: enable support for multi-stage bus enumerationMaxim Uvarov
Some drivers (like ftpm) can operate only after tee-supplicant runs because of tee-supplicant provides things like storage services (rpmb, shm).  This patch splits probe of non tee-supplicant dependable drivers to the early stage, and after tee-supplicant run probe other drivers. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Suggested-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-07-10optee: use uuid for sysfs driver entryMaxim Uvarov
With the evolving use-cases for TEE bus, now it's required to support multi-stage enumeration process. But using a simple index doesn't suffice this requirement and instead leads to duplicate sysfs entries. So instead switch to use more informative device UUID for sysfs entry like: /sys/bus/tee/devices/optee-ta-<uuid> Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-28tee: fix crypto selectArnd Bergmann
When selecting a crypto cipher, we also need to select the subsystem itself: WARNING: unmet direct dependencies detected for CRYPTO_SHA1 Depends on [m]: CRYPTO [=m] Selected by [y]: - TEE [=y] && (HAVE_ARM_SMCCC [=n] || COMPILE_TEST [=y] || CPU_SUP_AMD [=y]) Selected by [m]: - CRYPTO_DEV_QAT [=m] && CRYPTO [=m] && CRYPTO_HW [=y] - CRYPTO_DEV_MEDIATEK [=m] && CRYPTO [=m] && CRYPTO_HW [=y] && (ARM && ARCH_MEDIATEK || COMPILE_TEST [=y]) - CRYPTO_DEV_SAFEXCEL [=m] && CRYPTO [=m] && CRYPTO_HW [=y] && (OF [=y] || PCI [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] - CRYPTO_DEV_CCREE [=m] && CRYPTO [=m] && CRYPTO_HW [=y] && OF [=y] && HAS_DMA [=y] - CRYPTO_DEV_SP_CCP [=y] && CRYPTO [=m] && CRYPTO_HW [=y] && CRYPTO_DEV_CCP [=y] && CRYPTO_DEV_CCP_DD [=m] && DMADEVICES [=y] Link: https://lore.kernel.org/r/20200527133924.724819-1-arnd@arndb.de Fixes: e33bcbab16d1 ("tee: add support for session's client UUID generation") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-25Merge tag 'tee-login-for-5.8' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Adds utility function in TEE subsystem for client UUID generation. This function is also used in the optee driver. * tag 'tee-login-for-5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: optee: Add support for session login client UUID generation tee: add support for session's client UUID generation Link: https://lore.kernel.org/r/20200512131243.GA10028@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-25Merge tag 'tee-smatch-for-5.8' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers tee: remove unnecessary NULL check in tee_shm_alloc() * tag 'tee-smatch-for-5.8' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: remove unnecessary NULL check in tee_shm_alloc() Link: https://lore.kernel.org/r/20200504181333.GA11018@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-11tee: optee: Add support for session login client UUID generationVesa Jääskeläinen
Adds support for client UUID generation for OP-TEE. For group based session logins membership is verified. Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-05-11tee: add support for session's client UUID generationVesa Jääskeläinen
TEE Client API defines that from user space only information needed for specified login operations is group identifier for group based logins. REE kernel is expected to formulate trustworthy client UUID and pass that to TEE environment. REE kernel is required to verify that provided group identifier for group based logins matches calling processes group memberships. TEE specification only defines that the information passed from REE environment to TEE environment is encoded into on UUID. In order to guarantee trustworthiness of client UUID user space is not allowed to freely pass client UUID. UUIDv5 form is used encode variable amount of information needed for different login types. Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> [jw: remove unused variable application_id] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-04-20tee: add private login method for kernel clientsSumit Garg
There are use-cases where user-space shouldn't be allowed to communicate directly with a TEE device which is dedicated to provide a specific service for a kernel client. So add a private login method for kernel clients and disallow user-space to open-session using GP implementation defined login method range: (0x80000000 - 0xBFFFFFFF). Reviewed-by: Jerome Forissier <jerome@forissier.org> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-04-20tee: enable support to register kernel memorySumit Garg
Enable support to register kernel memory reference with TEE. This change will allow TEE bus drivers to register memory references. Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-04-20tee: remove unnecessary NULL check in tee_shm_alloc()Dan Carpenter
Smatch complains that "ctx" isn't checked consistently: drivers/tee/tee_shm.c:164 tee_shm_alloc() warn: variable dereferenced before check 'ctx' (see line 95) I audited the callers and "ctx" can't be NULL so the check can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-04-03Merge tag 'arm-drivers-5.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "These are the usual updates for SoC specific device drivers and related subsystems that don't have their own top-level maintainers: - ARM SCMI/SCPI updates to allow pluggable transport layers - TEE subsystem cleanups - A new driver for the Amlogic secure power domain controller - Various driver updates for the NXP Layerscape DPAA2, NXP i.MX SCU and TI OMAP2+ sysc drivers. - Qualcomm SoC driver updates, including a new library module for "protection domain" notifications - Lots of smaller bugfixes and cleanups in other drivers" * tag 'arm-drivers-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (70 commits) soc: fsl: qe: fix sparse warnings for ucc_slow.c soc: fsl: qe: ucc_slow: remove 0 assignment for kzalloc'ed structure soc: fsl: qe: fix sparse warnings for ucc_fast.c soc: fsl: qe: fix sparse warnings for qe_ic.c soc: fsl: qe: fix sparse warnings for ucc.c soc: fsl: qe: fix sparse warning for qe_common.c soc: fsl: qe: fix sparse warnings for qe.c soc: qcom: Fix QCOM_APR dependencies soc: qcom: pdr: Avoid uninitialized use of found in pdr_indication_cb soc: imx: drop COMPILE_TEST for IMX_SCU_SOC firmware: imx: add COMPILE_TEST for IMX_SCU driver soc: imx: gpc: fix power up sequencing soc: imx: increase build coverage for imx8m soc driver soc: qcom: apr: Add avs/audio tracking functionality dt-bindings: soc: qcom: apr: Add protection domain bindings soc: qcom: Introduce Protection Domain Restart helpers devicetree: bindings: firmware: add ipq806x to qcom_scm memory: tegra: Correct debugfs clk rate-range on Tegra124 memory: tegra: Correct debugfs clk rate-range on Tegra30 memory: tegra: Correct debugfs clk rate-range on Tegra20 ...
2020-03-27Merge tag 'tee-cleanup-for-5.7' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers Cleanup shared memory handing in TEE subsystem The highlights are: - Removing redundant or unused fields in struct tee_shm - Only assign userspace shm IDs for shared memory objects originating from user space * tag 'tee-cleanup-for-5.7' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: tee_shm_op_mmap(): use TEE_SHM_USER_MAPPED tee: remove redundant teedev in struct tee_shm tee: don't assign shm id for private shms tee: remove unused tee_shm_priv_alloc() tee: remove linked list of struct tee_shm Link: https://lore.kernel.org/r/20200228140925.GA12393@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tee-amdtee-fix2-for-5.6' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes tee: amdtee: out of bounds read in find_session() * tag 'tee-amdtee-fix2-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: out of bounds read in find_session() Link: https://lore.kernel.org/r/20200320063446.GA9892@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-10tee: amdtee: out of bounds read in find_session()Dan Carpenter
The "index" is a user provided value from 0-USHRT_MAX. If it's over TEE_NUM_SESSIONS (31) then it results in an out of bounds read when we call test_bit(index, sess->sess_mask). Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Acked-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-03-03Merge tag 'socfpga_dts_fix_for_v5.6_v2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes arm64: dts: agilex: fix gmac compatible - The compatible for Agilex GMAC should be "altr,socfpga-stmmac-a10-s10" * tag 'socfpga_dts_fix_for_v5.6_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (578 commits) arm64: dts: socfpga: agilex: Fix gmac compatible Linux 5.6-rc4 KVM: VMX: check descriptor table exits on instruction emulation ext4: potential crash on allocation error in ext4_alloc_flex_bg_array() macintosh: therm_windtunnel: fix regression when instantiating devices jbd2: fix data races at struct journal_head kvm: x86: Limit the number of "kvm: disabled by bios" messages KVM: x86: avoid useless copy of cpufreq policy KVM: allow disabling -Werror KVM: x86: allow compiling as non-module with W=1 KVM: Pre-allocate 1 cpumask variable per cpu for both pv tlb and pv ipis KVM: Introduce pv check helpers KVM: let declaration of kvm_get_running_vcpus match implementation KVM: SVM: allocate AVIC data structures based on kvm_amd module parameter MAINTAINERS: Correct Cadence PCI driver path io_uring: fix 32-bit compatability with sendmsg/recvmsg net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() ... Link: https://lore.kernel.org/r/20200303153509.28248-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-28tee: tee_shm_op_mmap(): use TEE_SHM_USER_MAPPEDJens Wiklander
tee_shm_op_mmap() uses the TEE_SHM_USER_MAPPED flag instead of the TEE_SHM_REGISTER flag to tell if a shared memory object is originating from registered user space memory. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-28tee: remove redundant teedev in struct tee_shmJens Wiklander
The ctx element in struct tee_shm is always valid. So remove the now redundant teedev element. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-28tee: don't assign shm id for private shmsJens Wiklander
Private shared memory object must not be referenced from user space. To guarantee that, don't assign an id to shared memory objects which are driver private. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-28tee: remove unused tee_shm_priv_alloc()Jens Wiklander
tee_shm_priv_alloc() isn't useful in the current state and it's also not not used so remove it. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-28tee: remove linked list of struct tee_shmJens Wiklander
Removes list_shm from struct tee_context since the linked list isn't used any longer. Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-27tee: amdtee: fix memory leak in amdtee_open_session()Dan Carpenter
On these error paths the "sess" variable isn't freed. It's a refcounted pointer so we need to call kref_put(). I re-arranged the code a bit so the error case is always handled before the success case and the error paths are indented two tabs. Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-02-24Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a Kconfig-related build error and an integer overflow in chacha20poly1305" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: chacha20poly1305 - prevent integer overflow on large input tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DD
2020-02-13tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DDHongbo Yao
If CRYPTO_DEV_CCP_DD=m and AMDTEE=y, the following error is seen while building call.c or core.c drivers/tee/amdtee/call.o: In function `handle_unload_ta': call.c:(.text+0x35f): undefined reference to `psp_tee_process_cmd' drivers/tee/amdtee/core.o: In function `amdtee_driver_init': core.c:(.init.text+0xf): undefined reference to `psp_check_tee_status Fix the config dependency for AMDTEE here. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-08Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
2020-01-30Merge tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Davbe Airlie: "This is the main pull request for graphics for 5.6. Usual selection of changes all over. I've got one outstanding vmwgfx pull that touches mm so kept it separate until after all of this lands. I'll try and get it to you soon after this, but it might be early next week (nothing wrong with code, just my schedule is messy) This also hits a lot of fbdev drivers with some cleanups. Other notables: - vulkan timeline semaphore support added to syncobjs - nouveau turing secureboot/graphics support - Displayport MST display stream compression support Detailed summary: uapi: - dma-buf heaps added (and fixed) - command line add support for panel oreientation - command line allow overriding penguin count drm: - mipi dsi definition updates - lockdep annotations for dma_resv - remove dma-buf kmap/kunmap support - constify fb_ops in all fbdev drivers - MST fix for daisy chained hotplug- - CTA-861-G modes with VIC >= 193 added - fix drm_panel_of_backlight export - LVDS decoder support - more device based logging support - scanline alighment for dumb buffers - MST DSC helpers scheduler: - documentation fixes - job distribution improvements panel: - Logic PD type 28 panel support - Jimax8729d MIPI-DSI - igenic JZ4770 - generic DSI devicetree bindings - sony acx424AKP panel - Leadtek LTK500HD1829 - xinpeng XPP055C272 - AUO B116XAK01 - GiantPlus GPM940B0 - BOE NV140FHM-N49 - Satoz SAT050AT40H12R2 - Sharp LS020B1DD01D panels. ttm: - use blocking WW lock i915: - hw/uapi state separation - Lock annotation improvements - selftest improvements - ICL/TGL DSI VDSC support - VBT parsing improvments - Display refactoring - DSI updates + fixes - HDCP 2.2 for CFL - CML PCI ID fixes - GLK+ fbc fix - PSR fixes - GEN/GT refactor improvments - DP MST fixes - switch context id alloc to xarray - workaround updates - LMEM debugfs support - tiled monitor fixes - ICL+ clock gating programming removed - DP MST disable sequence fixed - LMEM discontiguous object maps - prefaulting for discontiguous objects - use LMEM for dumb buffers if possible - add LMEM mmap support amdgpu: - enable sync object timelines for vulkan - MST atomic routines - enable MST DSC support - add DMCUB display microengine support - DC OEM i2c support - Renoir DC fixes - Initial HDCP 2.x support - BACO support for Arcturus - Use BACO for runtime PM power save - gfxoff on navi10 - gfx10 golden updates and fixes - DCN support on POWER - GFXOFF for raven1 refresh - MM engine idle handlers cleanup - 10bpc EDP panel fixes - renoir watermark fixes - SR-IOV fixes - Arcturus VCN fixes - GDDR6 training fixes - freesync fixes - Pollock support amdkfd: - unify more codepath with amdgpu - use KIQ to setup HIQ rather than MMIO radeon: - fix vma fault handler race - PPC DMA fix - register check fixes for r100/r200 nouveau: - mmap_sem vs dma_resv fix - rewrite the ACR secure boot code for Turing - TU10x graphics engine support (TU11x pending) - Page kind mapping for turing - 10-bit LUT support - GP10B Tegra fixes - HD audio regression fix hisilicon/hibmc: - use generic fbdev code and helpers rockchip: - dsi/px30 support virtio: - fb damage support - static some functions vc4: - use dma_resv lock wrappers msm: - use dma_resv lock wrappers - sc7180 display + DSI support - a618 support - UBWC support improvements vmwgfx: - updates + new logging uapi exynos: - enable/disable callback cleanups etnaviv: - use dma_resv lock wrappers atmel-hlcdc: - clock fixes mediatek: - cmdq support - non-smooth cursor fixes - ctm property support sun4i: - suspend support - A64 mipi dsi support rcar-du: - Color management module support - LVDS encoder dual-link support - R8A77980 support analogic: - add support for an6345 ast: - atomic modeset support - primary plane garbage fix arcgpu: - fixes for fourcc handling tegra: - minor fixes and improvments mcde: - vblank support meson: - OSD1 plane AFBC commit gma500: - add pageflip support - reomve global drm_dev komeda: - tweak debugfs output - d32 support - runtime PM suppotr udl: - use generic shmem helpers - cleanup and fixes" * tag 'drm-next-2020-01-30' of git://anongit.freedesktop.org/drm/drm: (1998 commits) drm/nouveau/fb/gp102-: allow module to load even when scrubber binary is missing drm/nouveau/acr: return error when registering LSF if ACR not supported drm/nouveau/disp/gv100-: not all channel types support reporting error codes drm/nouveau/disp/nv50-: prevent oops when no channel method map provided drm/nouveau: support synchronous pushbuf submission drm/nouveau: signal pending fences when channel has been killed drm/nouveau: reject attempts to submit to dead channels drm/nouveau: zero vma pointer even if we only unreference it rather than free drm/nouveau: Add HD-audio component notifier support drm/nouveau: fix build error without CONFIG_IOMMU_API drm/nouveau/kms/nv04: remove set but not used variable 'width' drm/nouveau/kms/nv50: remove set but not unused variable 'nv_connector' drm/nouveau/mmu: fix comptag memory leak drm/nouveau/gr/gp10b: Use gp100_grctx and gp100_gr_zbc drm/nouveau/pmu/gm20b,gp10b: Fix Falcon bootstrapping drm/exynos: Rename Exynos to lowercase drm/exynos: change callback names drm/mst: Don't do atomic checks over disabled managers drm/amdgpu: add the lost mutex_init back drm/amd/display: skip opp blank or unblank if test pattern enabled ...
2020-01-28Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Removed CRYPTO_TFM_RES flags - Extended spawn grabbing to all algorithm types - Moved hash descsize verification into API code Algorithms: - Fixed recursive pcrypt dead-lock - Added new 32 and 64-bit generic versions of poly1305 - Added cryptogams implementation of x86/poly1305 Drivers: - Added support for i.MX8M Mini in caam - Added support for i.MX8M Nano in caam - Added support for i.MX8M Plus in caam - Added support for A33 variant of SS in sun4i-ss - Added TEE support for Raven Ridge in ccp - Added in-kernel API to submit TEE commands in ccp - Added AMD-TEE driver - Added support for BCM2711 in iproc-rng200 - Added support for AES256-GCM based ciphers for chtls - Added aead support on SEC2 in hisilicon" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits) crypto: arm/chacha - fix build failured when kernel mode NEON is disabled crypto: caam - add support for i.MX8M Plus crypto: x86/poly1305 - emit does base conversion itself crypto: hisilicon - fix spelling mistake "disgest" -> "digest" crypto: chacha20poly1305 - add back missing test vectors and test chunking crypto: x86/poly1305 - fix .gitignore typo tee: fix memory allocation failure checks on drv_data and amdtee crypto: ccree - erase unneeded inline funcs crypto: ccree - make cc_pm_put_suspend() void crypto: ccree - split overloaded usage of irq field crypto: ccree - fix PM race condition crypto: ccree - fix FDE descriptor sequence crypto: ccree - cc_do_send_request() is void func crypto: ccree - fix pm wrongful error reporting crypto: ccree - turn errors to debug msgs crypto: ccree - fix AEAD decrypt auth fail crypto: ccree - fix typo in comment crypto: ccree - fix typos in error msgs crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data crypto: x86/sha - Eliminate casts on asm implementations ...
2020-01-24Merge tag 'tee-optee-fix2-for-5.5' of ↵Olof Johansson
https://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes Fix OP-TEE compile error with nommu * tag 'tee-optee-fix2-for-5.5' of https://git.linaro.org:/people/jens.wiklander/linux-tee: tee: optee: Fix compilation issue with nommu Link: https://lore.kernel.org/r/20200123101310.GA10320@jax Signed-off-by: Olof Johansson <olof@lixom.net>
2020-01-23tee: optee: Fix compilation issue with nommuVincenzo Frascino
The optee driver uses specific page table types to verify if a memory region is normal. These types are not defined in nommu systems. Trying to compile the driver in these systems results in a build error: linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’: linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared (first use in this function); did you mean ‘PREEMPT_MASK’? return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~ PREEMPT_MASK linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is reported only once for each function it appears in linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared (first use in this function) return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~~~~~~~ Make the optee driver depend on MMU to fix the compilation issue. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> [jw: update commit title] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-01-22tee: fix memory allocation failure checks on drv_data and amdteeColin Ian King
Currently the memory allocation failure checks on drv_data and amdtee are using IS_ERR rather than checking for a null pointer. Fix these checks to use the conventional null pointer check. Addresses-Coverity: ("Dereference null return") Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-16tee: amdtee: remove redundant NULL check for poolRijo Thomas
Remove NULL check for pool variable, since in the current code path it is guaranteed to be non-NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: rename err label to err_device_unregisterRijo Thomas
Rename err label to err_device_unregister for better readability. Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: skip tee_device_unregister if tee_device_alloc failsRijo Thomas
Currently, if tee_device_alloc() fails, then tee_device_unregister() is a no-op. Therefore, skip the function call to tee_device_unregister() by introducing a new goto label 'err_free_pool'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: print error message if tee not presentRijo Thomas
If there is no TEE with which the driver can communicate, then print an error message and return. Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-16tee: amdtee: remove unused variable initializationRijo Thomas
Remove unused variable initialization from driver code. If enabled as a compiler option, compiler may throw warning for unused assignments. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-04tee: amdtee: check TEE status during driver initializationRijo Thomas
The AMD-TEE driver should check if TEE is available before registering itself with TEE subsystem. This ensures that there is a TEE which the driver can talk to before proceeding with tee device node allocation. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-04tee: add AMD-TEE driverRijo Thomas
Adds AMD-TEE driver. * targets AMD APUs which has AMD Secure Processor with software-based Trusted Execution Environment (TEE) support * registers with TEE subsystem * defines tee_driver_ops function callbacks * kernel allocated memory is used as shared memory between normal world and secure world. * acts as REE (Rich Execution Environment) communication agent, which uses the services of AMD Secure Processor driver to submit commands for processing in TEE environment Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-04tee: allow compilation of tee subsystem for AMD CPUsRijo Thomas
Allow compilation of tee subsystem for AMD's CPUs which have a dedicated AMD Secure Processor for Trusted Execution Environment (TEE). Acked-by: Jens Wiklander <jens.wiklander@linaro.org> Co-developed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com> Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com> Reviewed-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2024-06-25 15:41:39 +0000