summaryrefslogtreecommitdiff
path: root/drivers/thermal/qcom/tsens.c
AgeCommit message (Collapse)Author
2023-09-29thermal: tsens: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-26thermal/drivers/qcom: Remove redundant msg at probe timeYangtao Li
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly print error information. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230620090732.50025-9-frank.li@vivo.com
2023-06-26thermal/drivers/qcom/tsens-v0_1: Add MSM8909 dataStephan Gerhold
The MSM8909 SoC has 5 thermal sensors in a TSENS v0.1 block. Like MDM9607 it uses a non-standard default slope value of 3000 [1] and needs per-sensor "correction factors" to workaround issues with the factory calibration [2]. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/blob/LA.UM.7.7.c26-09100-8x09.0/arch/arm/boot/dts/qcom/msm8909.dtsi#L476 [2]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/6df022c6d0c2c1b4a5a6c2124dba4d57910c0911 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230508-msm8909-tsens-v5-6-5eb632235ba7@kernkonzept.com
2023-06-26thermal/drivers/qcom/tsens-v0_1: Add mdm9607 correction offsetsStephan Gerhold
According to the msm-3.18 vendor kernel from Qualcomm, mdm9607 needs "correction factors" to adjust for additional offsets observed after the factory calibration values in the fuses [1, 2]. The fixed offsets should be applied unless there is a special calibration mode value that indicates that no offsets are needed [3]. Note that the new calibration mode values are called differently in this patch compared to the vendor kernel: - TSENS_TWO_POINT_CALIB_N_WA -> ONE_PT_CALIB2_NO_OFFSET - TSENS_TWO_POINT_CALIB_N_OFFSET_WA -> TWO_PT_CALIB_NO_OFFSET This is because close inspection of the calibration function [3] reveals that TSENS_TWO_POINT_CALIB_N_WA is actually a "one point" calibration because the if statements skip all "point2" related code for it. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/d9d2db1b82bf3f72f5de0803d55e6849eb5b671e [2]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/d75aef53a760e8ff7bac54049d00c8b2ee1b193e [3]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/blob/LE.UM.4.3.2.r1-04200-9x07/drivers/thermal/msm-tsens.c#L2987-3136 Fixes: a2149ab815fc ("thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230508-msm8909-tsens-v5-3-5eb632235ba7@kernkonzept.com
2023-06-26thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226Matti Lehtimäki
The MSM8226 TSENS IP has 6 thermal sensors in a TSENS v0.1 block. The thermal sensors use non-standard slope values. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230507201225.89694-4-matti.lehtimaki@gmail.com
2023-03-03thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()Daniel Lezcano
The devres variant of thermal_add_hwmon_sysfs() only takes the thermal zone structure pointer as parameter. Actually, it uses the tz->device to add it in the devres list. It is preferable to use the device registering the thermal zone instead of the thermal zone device itself. That prevents the driver accessing the thermal zone structure internals and it is from my POV more correct regarding how devm_ is used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in thermal located driversDaniel Lezcano
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062 Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-16thermal/drivers/qcom: Remove duplicate set next trip point interrupt codeDaniel Lezcano
The tsens driver reprogram the next trip points in the irq handler. This function then call thermal_zone_device_update(). However, thermal_zone_device_update() calls thermal_zone_set_trips() and from there it calls the backend 'set_trips' ops. This one in turn reprogram the next trip points (low/high). Consequently, the code setting the next trip points interrupt in the interrupt handle is not needed and could be removed. Reviewed-by: Bjorn Andersson <andersson@kernel.org> Acked-by: Amit Kucheria <amitk@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230116101955.3961427-1-daniel.lezcano@linaro.org
2023-01-16thermal/drivers/tsens: Rework legacy calibration data parsersDmitry Baryshkov
Rework existing calibration parsing code to use simple data structure describing data layout. This allows us to drop all the mask & shift values, replacing them with data tables. The code for msm8974 is not reworked, as it has separate calibration and backup data. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-12-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-01-16thermal/drivers/tsens: Support using nvmem cells for msm8974 calibrationDmitry Baryshkov
MSM8974 has two sets of calibration data: main one and backup. Add support for parsing both sets of calibration data from nvmem cells. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-11-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-01-16thermal/drivers/tsens: Support using nvmem cells for calibration dataDmitry Baryshkov
Add a unified function using nvmem cells for parsing the calibration data rather than parsing the calibration blob manually. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-10-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-01-16thermal/drivers/tsens: Sort out msm8976 vs msm8956 dataDmitry Baryshkov
Tsens driver mentions that msm8976 data should be used for both msm8976 and msm8956 SoCs. This is not quite correct, as according to the vendor kernels, msm8976 should use standard slope values (3200), while msm8956 really uses the slope values found in the driver. Add separate compatibility string for msm8956, move slope value overrides to the corresponding init function and use the standard compute_intercept_slope() function for both platforms. Fixes: 0e580290170d ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230101194034.831222-7-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-12-14thermal/drivers/qcom/tsens: Rework debugfs file structureChristian Marangi
The current tsens debugfs structure is composed by: - a tsens dir in debugfs with a version file - a directory for each tsens istance with sensors file to dump all the sensors value. This works on the assumption that we have the same version for each istance but this assumption seems fragile and with more than one tsens istance results in the version file not tracking each of them. A better approach is to just create a subdirectory for each tsens istance and put there version and sensors debugfs file. Using this new implementation results in less code since debugfs entry are created only on successful tsens probe. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/qcom/tsens: Fix wrong version id dbg_version_showChristian Marangi
For VER_0 the version was incorrectly reported as 0.1.0. Fix that and correctly report the major version for this old tsens revision. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/qcom/tsens: Init debugfs only with successful probeChristian Marangi
Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a double or a wrong init of the debugfs information. Init debugfs only with successful probe fixing warning about directory already present. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20221022125657.22530-2-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/tsens: Add IPQ8074 supportRobert Marko
Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP it only has one IRQ, that is used for up/low as well as critical. It also does not support negative trip temperatures. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-12-14thermal/drivers/tsens: Allow configuring min and max tripsRobert Marko
IPQ8074 and IPQ6018 dont support negative trip temperatures and support up to 204 degrees C as the max trip temperature. So, instead of always setting the -40 as min and 120 degrees C as max allow it to be configured as part of the features. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-12-14thermal/drivers/tsens: Add support for combined interruptRobert Marko
Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for signaling both up/low and critical trips. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-08-17thermal/drivers/qcom: Switch to new of APIDaniel Lezcano
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220804224349.1926752-12-daniel.lezcano@linexp.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-28thermal/drivers/qcom: Remove get_trend functionDaniel Lezcano
There is a get_trend function which is a wrapper to call a private get_trend function. However, this private get_trend function is not assigned anywhere. Remove this dead code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Amit Kucheria <amitk@kernel.org> Link: https://lore.kernel.org/r/20220616202537.303655-1-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/tsens: Add compat string for the qcom,msm8960Dmitry Baryshkov
On apq8064 (msm8960) platforms the tsens device is created manually by the gcc driver. Prepare the tsens driver for the qcom,msm8960-tsens device instantiated from the device tree. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220406002648.393486-3-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08thermal/drivers/tsens: register thermal zones as hwmon sensorsDmitry Baryshkov
Register thermal zones as hwmon sensors to let userspace read CPU temperatures using standard hwmon interface. Acked-by: Amit Kucheria <amitk@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220129180750.1882310-1-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-16thermal/drivers/tsens: Add timeout to get_temp_tsens_validAnsuel Smith
The function can loop and lock the system if for whatever reason the bit for the target sensor is NEVER valid. This is the case if a sensor is disabled by the factory and the valid bit is never reported as actually valid. Add a timeout check and exit if a timeout occurs. As this is a very rare condition, handle the timeout only if the first read fails. While at it also rework the function to improve readability and convert to poll_timeout generic macro. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007172859.583-1-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-09-21thermal/drivers/tsens: Fix wrong check for tzd in irq handlersAnsuel Smith
Some devices can have some thermal sensors disabled from the factory. The current two irq handler functions check all the sensor by default and the check if the sensor was actually registered is wrong. The tzd is actually never set if the registration fails hence the IS_ERR check is wrong. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210907212543.20220-1-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Add support for ipq8064-tsensAnsuel Smith
Add support for tsens present in ipq806x SoCs based on generic msm8960 tsens driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-9-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Add VER_0 tsens versionAnsuel Smith
VER_0 is used to describe device based on tsens version before v0.1. These device are devices based on msm8960 for example apq8064 or ipq806x. Add support for VER_0 in tsens.c and set the right tsens feat in tsens-8960.c file. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-4-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Don't hardcode sensor slopeAnsuel Smith
Function compute_intercept_slope hardcode the sensor slope to SLOPE_DEFAULT. Change this and use the default value only if a slope is not defined. This is needed for tsens VER_0 that has a hardcoded slope table. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-2-ansuelsmth@gmail.com
2021-04-20thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607Konrad Dybcio
MDM9607 TSENS IP is very similar to the one of MSM8916, with minor adjustments to various tuning values. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210319220802.198215-2-konrad.dybcio@somainline.org
2021-04-15thermal/drivers/tsens: Fix missing put_device errorGuangqing Zhu
Fixes coccicheck error: drivers/thermal/qcom/tsens.c:759:4-10: ERROR: missing put_device; call of_find_device_by_node on line 715, but without a corresponding object release within this function. Fixes: a7ff82976122 ("drivers: thermal: tsens: Merge tsens-common.c into tsens.c") Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210404125431.12208-1-zhuguangqing83@gmail.com
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
2020-07-27thermal: qcom: tsens-v0_1: Add support for MSM8939Shawn Guo
The TSENS integrated on MSM8939 is a v0_1 device with 10 sensors. Different from its predecessor MSM8916, where 'calib_sel' bits sit in separate qfprom word, MSM8939 has 'cailb' and 'calib_sel' bits mixed and spread on discrete offsets. That's why all qfprom bits are read as one go and later mapped to calibration data for MSM8939. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Konrad Dybcio <konradybcio@gmail.com> /* on Asus Z00T smartphone */ Acked-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629144926.665-3-shawn.guo@linaro.org
2020-06-29thermal/drivers/tsens: Fix compilation warnings by making functions staticAmit Kucheria
After merging tsens-common.c into tsens.c, we can now mark some functions static so they don't need any prototype declarations. This fixes the following issue reported by lkp. >> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes] 385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes] 455 | irqreturn_t tsens_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes] 523 | int tsens_set_trips(void *_sensor, int low, int high) | ^~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes] 560 | int tsens_enable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes] 573 | void tsens_disable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~~ Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org
2020-05-22drivers: thermal: tsens: Merge tsens-common.c into tsens.cAmit Kucheria
tsens-common.c has outlived its usefuless. It was created expecting lots of custom routines per version of the TSENS IP. We haven't needed those, there is now only data in the version-specific files. Merge the code for tsens-common.c into tsens.c. As a result, - Remove any unnecessary forward declarations in tsens.h. - Add a Linaro copyright to tsens.c. - Fixup the Makefile to remove tsens-common.c. - Where it made sense, fix some 80-column alignments in the tsens-common.c code being copied over. There is no functional change with this patch. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/e30e2ba6fa5c007983afd4d7d4e0311c0b57917a.1588183879.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: Remove unnecessary irq flagAmit Kucheria
IRQF_TRIGGER_HIGH is already specified through devicetree interrupts property. Remove it from code. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/8ac92e45b65fe411f4aaf70dcde4e7e7c3169b2d.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: Add critical interrupt supportAmit Kucheria
TSENS IP v2.x adds critical threshold interrupt support for each sensor in addition to the upper/lower threshold interrupt. Add support in the driver. While the critical interrupts themselves aren't currently used by Linux, the HW line is also used by the TSENS watchdog. So this patch acts as infrastructure to enable watchdog functionality for the TSENS IP. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/51b22461d4b5f85a817274568459db4579fd4298.1584015867.git.amit.kucheria@linaro.org
2020-01-07drivers: thermal: tsens: Work with old DTBsAmit Kucheria
In order for the old DTBs to continue working, the new interrupt code must not return an error if interrupts are not defined. Don't return an error in case of -ENXIO. Fixes: 634e11d5b450a ("drivers: thermal: tsens: Add interrupt support") Suggested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/cea3317c5d793db312064d68b261ad420a4a81b1.1576146898.git.amit.kucheria@linaro.org
2019-11-07thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976AngeloGioacchino Del Regno
Add support for reading calibrated value from thermistors in MSM8956, MSM8976 and their APQ variants. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191005104133.30297-2-kholk11@gmail.com
2019-11-07drivers: thermal: tsens: Add interrupt supportAmit Kucheria
Depending on the IP version, TSENS supports upper, lower and critical threshold interrupts. We only add support for upper and lower threshold interrupts for now. TSENSv2 has an irq [status|clear|mask] bit tuple for each sensor while earlier versions only have a single bit per sensor to denote status and clear. These differences are handled transparently by the interrupt handler. At each interrupt, we reprogram the new upper and lower threshold in the .set_trip callback. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7508ba143f144407e5dd546107ddae65c380a76f.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add debugfs supportAmit Kucheria
Dump some basic version info and sensor details into debugfs. Example from qcs404 below: --(/sys/kernel/debug) $ ls tsens/ 4a9000.thermal-sensor version --(/sys/kernel/debug) $ cat tsens/version 1.4.0 --(/sys/kernel/debug) $ cat tsens/4a9000.thermal-sensor/sensors max: 11 num: 10 id slope offset ------------------------ 0 3200 404000 1 3200 404000 2 3200 404000 3 3200 404000 4 3200 404000 5 3200 404000 6 3200 404000 7 3200 404000 8 3200 404000 9 3200 404000 Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/16e39c1bbfc18b5cf6274620cd72cc63205f53a5.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add __func__ identifier to debug statementsAmit Kucheria
Printing the function name when enabling debugging makes logs easier to read. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/18717de35f31098d3ebc12564c2767b6d54d37d8.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Simplify code flow in tsens_probeAmit Kucheria
Move platform_set_drvdata up to avoid an extra 'if (ret)' check after the call to tsens_register. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/184422dcc1c12553e71a58c62e01425fd7d1172a.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Get rid of id field in tsens_sensorAmit Kucheria
There are two fields - id and hw_id - to track what sensor an action was to performed on. This was because the sensors connected to a TSENS IP might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped. This causes confusion in the code which uses hw_id sometimes and id other times (tsens_get_temp, tsens_get_trend). Switch to only using the hw_id field to track the physical ID of the sensor. When we iterate through all the sensors connected to an IP block, we use an index i to loop through the list of sensors, and then return the actual hw_id that is registered on that index. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/30206cd47d303d2dcaef87f4e3c7173481a0bddd.1572526427.git.amit.kucheria@linaro.org
2019-05-28Revert "drivers: thermal: tsens: Add new operation to check if a sensor is ↵Eduardo Valentin
enabled" This reverts commit 3e6a8fb3308419129c7a52de6eb42feef5a919a0. Cc: Andy Gross <agross@kernel.org> Cc: David Brown <david.brown@linaro.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Suggested-by: Amit Kucheria <amit.kucheria@linaro.org> Reported-by: Andy Gross <andygro@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add generic support for TSENS v1 IPAmit Kucheria
qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4 of the TSENS IP, functionality for which is encapsulated inside the qcom,tsens-v1 compatible. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add new operation to check if a sensor is enabledAmit Kucheria
is_sensor_enabled() checks if the sensors are enabled on this platform. It is possible that the SoC might choose not to enable all the sensors that the IP block is capable of supporting. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Don't print error message on -EPROBE_DEFERAmit Kucheria
We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows: [ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4 [ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed [ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4 This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce reg_fields to deal with register descriptionAmit Kucheria
As we add support for newer versions of the TSENS IP, the current approach isn't scaling because registers and bitfields get moved around, requiring platform-specific hacks in the code. By moving to regmap, we can hide the register level differences away from the code. Define a common set of registers and bit-fields that we care about across the various tsens IP versions. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Use consistent names for variablesAmit Kucheria
tsens_get_temp() uses the name 'data' for the void pointer, use the same in tsens_get_trend() for consistency. Remove a stray space while we're at it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename variable tmdevAmit Kucheria
tmdev seems to imply that this is a device pointer when in fact it is just private platform data for each tsens device. Rename it to priv improve code readability. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_deviceAmit Kucheria
Rename to tsens_priv to denote that it is private data for each tsens instance. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit (git 2.34.1) at 2024-05-09 04:01:46 +0000