summaryrefslogtreecommitdiff
path: root/drivers/thermal/qcom
AgeCommit message (Collapse)Author
2020-09-04Merge tag 'thermal-v5.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal fixes from Daniel Lezcano: - Fix bogus thermal shutdowns for omap4430 where bogus values resulting from an incorrect ADC conversion are too high and fire an emergency shutdown (Tony Lindgren) - Don't suppress negative temp for qcom spmi as they are valid and userspace needs them (Veera Vegivada) - Fix use-after-free in thermal_zone_device_unregister reported by Kasan (Dmitry Osipenko) * tag 'thermal-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal: core: Fix use-after-free in thermal_zone_device_unregister() thermal: qcom-spmi-temp-alarm: Don't suppress negative temp thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430
2020-09-04thermal: qcom-spmi-temp-alarm: Don't suppress negative tempVeera Vegivada
Currently driver is suppressing the negative temperature readings from the vadc. Consumers of the thermal zones need to read the negative temperature too. Don't suppress the readings. Fixes: c610afaa21d3c6e ("thermal: Add QPNP PMIC temperature alarm driver") Signed-off-by: Veera Vegivada <vvegivad@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/944856eb819081268fab783236a916257de120e4.1596040416.git.gurus@codeaurora.org
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
2020-07-27thermal: qcom: tsens-v0_1: Add support for MSM8939Shawn Guo
The TSENS integrated on MSM8939 is a v0_1 device with 10 sensors. Different from its predecessor MSM8916, where 'calib_sel' bits sit in separate qfprom word, MSM8939 has 'cailb' and 'calib_sel' bits mixed and spread on discrete offsets. That's why all qfprom bits are read as one go and later mapped to calibration data for MSM8939. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Konrad Dybcio <konradybcio@gmail.com> /* on Asus Z00T smartphone */ Acked-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629144926.665-3-shawn.guo@linaro.org
2020-06-29thermal/drivers/tsens: Fix compilation warnings by making functions staticAmit Kucheria
After merging tsens-common.c into tsens.c, we can now mark some functions static so they don't need any prototype declarations. This fixes the following issue reported by lkp. >> drivers/thermal/qcom/tsens.c:385:13: warning: no previous prototype for 'tsens_critical_irq_thread' [-Wmissing-prototypes] 385 | irqreturn_t tsens_critical_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:455:13: warning: no previous prototype for 'tsens_irq_thread' [-Wmissing-prototypes] 455 | irqreturn_t tsens_irq_thread(int irq, void *data) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:523:5: warning: no previous prototype for 'tsens_set_trips' [-Wmissing-prototypes] 523 | int tsens_set_trips(void *_sensor, int low, int high) | ^~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:560:5: warning: no previous prototype for 'tsens_enable_irq' [-Wmissing-prototypes] 560 | int tsens_enable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~ >> drivers/thermal/qcom/tsens.c:573:6: warning: no previous prototype for 'tsens_disable_irq' [-Wmissing-prototypes] 573 | void tsens_disable_irq(struct tsens_priv *priv) | ^~~~~~~~~~~~~~~~~ Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/6757a26876b29922929abf64b1c11fa3b3033d03.1590579709.git.amit.kucheria@linaro.org
2020-05-22drivers: thermal: tsens: Merge tsens-common.c into tsens.cAmit Kucheria
tsens-common.c has outlived its usefuless. It was created expecting lots of custom routines per version of the TSENS IP. We haven't needed those, there is now only data in the version-specific files. Merge the code for tsens-common.c into tsens.c. As a result, - Remove any unnecessary forward declarations in tsens.h. - Add a Linaro copyright to tsens.c. - Fixup the Makefile to remove tsens-common.c. - Where it made sense, fix some 80-column alignments in the tsens-common.c code being copied over. There is no functional change with this patch. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/e30e2ba6fa5c007983afd4d7d4e0311c0b57917a.1588183879.git.amit.kucheria@linaro.org
2020-03-23thermal: qcom: tsens.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200319184838.GA25767@embeddedor.com
2020-03-20drivers: thermal: tsens: Remove unnecessary irq flagAmit Kucheria
IRQF_TRIGGER_HIGH is already specified through devicetree interrupts property. Remove it from code. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/8ac92e45b65fe411f4aaf70dcde4e7e7c3169b2d.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: kernel-doc fixupAmit Kucheria
Document ul_lock, threshold and control structure members and make the following kernel-doc invocation happy: $ scripts/kernel-doc -v -none drivers/thermal/qcom/* drivers/thermal/qcom/qcom-spmi-temp-alarm.c:105: info: Scanning doc for qpnp_tm_get_temp_stage drivers/thermal/qcom/tsens-common.c:18: info: Scanning doc for struct tsens_irq_data drivers/thermal/qcom/tsens-common.c:130: info: Scanning doc for tsens_hw_to_mC drivers/thermal/qcom/tsens-common.c:163: info: Scanning doc for tsens_mC_to_hw drivers/thermal/qcom/tsens-common.c:245: info: Scanning doc for tsens_set_interrupt drivers/thermal/qcom/tsens-common.c:268: info: Scanning doc for tsens_threshold_violated drivers/thermal/qcom/tsens-common.c:362: info: Scanning doc for tsens_critical_irq_thread drivers/thermal/qcom/tsens-common.c:438: info: Scanning doc for tsens_irq_thread drivers/thermal/qcom/tsens.h:41: info: Scanning doc for struct tsens_sensor drivers/thermal/qcom/tsens.h:59: info: Scanning doc for struct tsens_ops drivers/thermal/qcom/tsens.h:494: info: Scanning doc for struct tsens_features drivers/thermal/qcom/tsens.h:513: info: Scanning doc for struct tsens_plat_data drivers/thermal/qcom/tsens.h:529: info: Scanning doc for struct tsens_context Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7ea9c9ead90a91205a3f1717c0c86db9a51780ce.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: Add watchdog supportAmit Kucheria
TSENS IP v2.3 onwards adds support for a watchdog to detect if the TSENS HW FSM is stuck. Add support to detect and restart the FSM in the driver. The watchdog is configured by the bootloader, we just enable the watchdog bark as a debug feature in the kernel. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/a314747664a065db592ad77da7beae68128a5b6e.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: Add critical interrupt supportAmit Kucheria
TSENS IP v2.x adds critical threshold interrupt support for each sensor in addition to the upper/lower threshold interrupt. Add support in the driver. While the critical interrupts themselves aren't currently used by Linux, the HW line is also used by the TSENS watchdog. So this patch acts as infrastructure to enable watchdog functionality for the TSENS IP. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/51b22461d4b5f85a817274568459db4579fd4298.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: Release device in success pathAmit Kucheria
We don't currently call put_device in case of successfully initialising the device. So we hold the reference and keep the device pinned forever. Allow control to fall through so we can use same code for success and error paths to put_device. As a part of this fixup, change devm_ioremap_resource to act on the same device pointer as that used to allocate regmap memory. That ensures that we are free to release op->dev after examining its resources. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/d3996667e9f976bb30e97e301585cb1023be422e.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: use simpler variablesAmit Kucheria
We already dereference the sensor and save it into a variable. Use the variable directly to make the code easier to read. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/5dc4356edfb8dffa377fb561359bf41a6f1fdf17.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: Pass around struct tsens_sensor as a constantAmit Kucheria
All the sensor data is initialised at init time. Lock it down by passing it to functions as a constant. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/740f9254484c08d65869df578628eb523c0049ff.1584015867.git.amit.kucheria@linaro.org
2020-03-20drivers: thermal: tsens: De-constify struct tsens_featuresAmit Kucheria
struct tsens_features is currently initialized as part of platform data at compile-time and not modifiable. We now have some usecases in feature detection across IP versions where it is more flexible to update the features after probing registers. Remove const qualifier from tsens_features and the encapsulating tsens_plat_data. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/2919a72220470366ae11e0bb5330a4ea39838f71.1584015867.git.amit.kucheria@linaro.org
2020-01-07drivers: thermal: tsens: Work with old DTBsAmit Kucheria
In order for the old DTBs to continue working, the new interrupt code must not return an error if interrupts are not defined. Don't return an error in case of -ENXIO. Fixes: 634e11d5b450a ("drivers: thermal: tsens: Add interrupt support") Suggested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/cea3317c5d793db312064d68b261ad420a4a81b1.1576146898.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: fix potential integer overflow on multiplyColin Ian King
Currently a multiply operation is being performed on two int values and the result is being assigned to a u64, presumably because the end result is expected to be probably larger than an int. However, because the multiply is an int multiply one can get overflow. Avoid the overflow by casting degc to a u64 to force a u64 multiply. Also use div_u64 for the divide as suggested by Daniel Lezcano. Addresses-Coverity: ("Unintentional integer overflow") Fixes: fbfe1a042cfd ("drivers: thermal: tsens: Add interrupt support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191101100035.25502-1-colin.king@canonical.com
2019-11-07thermal: qcom: tsens-v1: Fix kfree of a non-pointer valueColin Ian King
Currently the kfree of pointer qfprom_cdata is kfreeing an error value that has been cast to a pointer rather than a valid address. Fix this by removing the kfree. Fixes: 95ededc17e4e ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191022111806.23143-1-colin.king@canonical.com
2019-11-07thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976AngeloGioacchino Del Regno
Add support for reading calibrated value from thermistors in MSM8956, MSM8976 and their APQ variants. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191005104133.30297-2-kholk11@gmail.com
2019-11-07drivers: thermal: tsens: Add interrupt supportAmit Kucheria
Depending on the IP version, TSENS supports upper, lower and critical threshold interrupts. We only add support for upper and lower threshold interrupts for now. TSENSv2 has an irq [status|clear|mask] bit tuple for each sensor while earlier versions only have a single bit per sensor to denote status and clear. These differences are handled transparently by the interrupt handler. At each interrupt, we reprogram the new upper and lower threshold in the .set_trip callback. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7508ba143f144407e5dd546107ddae65c380a76f.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Create function to return sign-extended temperatureAmit Kucheria
Hide the details of how to convert values read from TSENS HW to mCelsius behind a function. All versions of the IP can be supported as a result. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/0689917475cf83b7e01f6978504fd37352a5e3ca.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add debugfs supportAmit Kucheria
Dump some basic version info and sensor details into debugfs. Example from qcs404 below: --(/sys/kernel/debug) $ ls tsens/ 4a9000.thermal-sensor version --(/sys/kernel/debug) $ cat tsens/version 1.4.0 --(/sys/kernel/debug) $ cat tsens/4a9000.thermal-sensor/sensors max: 11 num: 10 id slope offset ------------------------ 0 3200 404000 1 3200 404000 2 3200 404000 3 3200 404000 4 3200 404000 5 3200 404000 6 3200 404000 7 3200 404000 8 3200 404000 9 3200 404000 Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/16e39c1bbfc18b5cf6274620cd72cc63205f53a5.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add __func__ identifier to debug statementsAmit Kucheria
Printing the function name when enabling debugging makes logs easier to read. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/18717de35f31098d3ebc12564c2767b6d54d37d8.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Simplify code flow in tsens_probeAmit Kucheria
Move platform_set_drvdata up to avoid an extra 'if (ret)' check after the call to tsens_register. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/184422dcc1c12553e71a58c62e01425fd7d1172a.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Get rid of id field in tsens_sensorAmit Kucheria
There are two fields - id and hw_id - to track what sensor an action was to performed on. This was because the sensors connected to a TSENS IP might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped. This causes confusion in the code which uses hw_id sometimes and id other times (tsens_get_temp, tsens_get_trend). Switch to only using the hw_id field to track the physical ID of the sensor. When we iterate through all the sensors connected to an IP block, we use an index i to loop through the list of sensors, and then return the actual hw_id that is registered on that index. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/30206cd47d303d2dcaef87f4e3c7173481a0bddd.1572526427.git.amit.kucheria@linaro.org
2019-08-28drivers: thermal: qcom: tsens: Fix memory leak from qfprom readSrinivas Kandagatla
memory returned as part of nvmem_read via qfprom_read should be freed by the consumer once done. Existing code is not doing it so fix it. Below memory leak detected by kmemleak [<ffffff80088b7658>] kmemleak_alloc+0x50/0x84 [<ffffff80081df120>] __kmalloc+0xe8/0x168 [<ffffff80086db350>] nvmem_cell_read+0x30/0x80 [<ffffff8008632790>] qfprom_read+0x4c/0x7c [<ffffff80086335a4>] calibrate_v1+0x34/0x204 [<ffffff8008632518>] tsens_probe+0x164/0x258 [<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0 [<ffffff80084de4f4>] really_probe+0x208/0x248 [<ffffff80084de2c4>] driver_probe_device+0x98/0xc0 [<ffffff80084dec54>] __device_attach_driver+0x9c/0xac [<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c [<ffffff80084de634>] __device_attach+0x8c/0x100 [<ffffff80084de6c8>] device_initial_probe+0x20/0x28 [<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c [<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98 [<ffffff80080c3da8>] process_one_work+0x160/0x2f8 Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28Revert "drivers: thermal: tsens: Add new operation to check if a sensor is ↵Eduardo Valentin
enabled" This reverts commit 3e6a8fb3308419129c7a52de6eb42feef5a919a0. Cc: Andy Gross <agross@kernel.org> Cc: David Brown <david.brown@linaro.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Suggested-by: Amit Kucheria <amit.kucheria@linaro.org> Reported-by: Andy Gross <andygro@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Remove the 'module' Kconfig option for thermal subsystem framework because the thermal framework are required to be ready as early as possible to avoid overheat at boot time (Daniel Lezcano) - Fix a bug that thermal framework pokes disabled thermal zones upon resume (Wei Wang) - A couple of cleanups and trivial fixes on int340x thermal drivers (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal: Downgrade error message mlxsw: Remove obsolete dependency on THERMAL=m hwmon/drivers/core: Simplify complex dependency thermal/drivers/core: Fix typo in the option name thermal/drivers/core: Remove depends on THERMAL in Kconfig thermal/drivers/core: Remove module unload code thermal/drivers/core: Remove the module Kconfig's option thermal: core: skip update disabled thermal zones after suspend thermal: make device_register's type argument const thermal: intel: int340x: processor_thermal_device: simplify to get driver data thermal/int3403_thermal: favor _TMP instead of PTYP
2019-05-14drivers: thermal: tsens: Move calibration constants to header fileAmit Kucheria
This will allow calibration routines to correctly include the constants from anywhere and allow more code sharing. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add generic support for TSENS v1 IPAmit Kucheria
qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4 of the TSENS IP, functionality for which is encapsulated inside the qcom,tsens-v1 compatible. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Common get_temp() learns to do ADC conversionAmit Kucheria
get_temp() learns to return temperature regardless of whether it is returned as ADC code or direct temperature. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharingAmit Kucheria
Just rename the function and move it to allow code sharing with future versions of TSENS IP Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: simplify get_temp_tsens_v2 routineAmit Kucheria
The current implementation is based on an algorithm published in the docs. Instead of reading the temperature thrice w/o any explanation, improve the algorithm. This will become the basis for a common get_temp routine in the future. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce IP-specific max_sensor countAmit Kucheria
The IP can support 'm' sensors while the platform can enable 'n' sensors of the 'm' where n <= m. Track maximum sensors supported by the IP so that we can correctly track what subset of the sensors are supported on the platform. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: change data type for sensor IDsAmit Kucheria
The IDs cannot be negative, fix the data type. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add new operation to check if a sensor is enabledAmit Kucheria
is_sensor_enabled() checks if the sensors are enabled on this platform. It is possible that the SoC might choose not to enable all the sensors that the IP block is capable of supporting. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Don't print error message on -EPROBE_DEFERAmit Kucheria
We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows: [ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4 [ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed [ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4 This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Save reference to the device pointer and use itAmit Kucheria
Code cleanup making it easier to read Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce reg_fields to deal with register descriptionAmit Kucheria
As we add support for newer versions of the TSENS IP, the current approach isn't scaling because registers and bitfields get moved around, requiring platform-specific hacks in the code. By moving to regmap, we can hide the register level differences away from the code. Define a common set of registers and bit-fields that we care about across the various tsens IP versions. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1Amit Kucheria
8974 and 8916 have the same version of the TSENS IP. Merge the files to allow for better code reuse. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename constants to prepare to merge with tsens-8974Amit Kucheria
Some #defines in tsens-v_0_1.c clash with those in tsens-8974.c. Prefix them with 8916 to avoid the clash so we can merge the two files. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974Amit Kucheria
8916 and 8974 use v0.1.0 of the TSENS IP. Rename tsens-8916 to prepare it for merging with tsens-8974 in a later commit. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Function prototypes should have argument namesAmit Kucheria
check_patch complains a lot as follows: WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name + int (*init)(struct tsens_priv *); Fix it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Use consistent names for variablesAmit Kucheria
tsens_get_temp() uses the name 'data' for the void pointer, use the same in tsens_get_trend() for consistency. Remove a stray space while we're at it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename variable tmdevAmit Kucheria
tmdev seems to imply that this is a device pointer when in fact it is just private platform data for each tsens device. Rename it to priv improve code readability. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_deviceAmit Kucheria
Rename to tsens_priv to denote that it is private data for each tsens instance. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_dataAmit Kucheria
Rename to tsens_plat_data to denote that it is platform-data passed in at compile-time. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit (git 2.34.1) at 2024-07-01 05:28:49 +0000