summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt
AgeCommit message (Collapse)Author
2019-10-08thunderbolt: Drop unnecessary read when writing LC command in Ice LakeMika Westerberg
The read is not needed as we overwrite the returned value in the next line anyway so drop it. Fixes: 3cdb9446a117 ("thunderbolt: Add support for Intel Ice Lake") Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-08thunderbolt: Fix lockdep circular locking depedency warningMika Westerberg
When lockdep is enabled, plugging Thunderbolt dock on Dominik's laptop triggers following splat: ====================================================== WARNING: possible circular locking dependency detected 5.3.0-rc6+ #1 Tainted: G T ------------------------------------------------------ pool-/usr/lib/b/1258 is trying to acquire lock: 000000005ab0ad43 (pci_rescan_remove_lock){+.+.}, at: authorized_store+0xe8/0x210 but task is already holding lock: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&tb->lock){+.+.}: __mutex_lock+0xac/0x9a0 tb_domain_add+0x2d/0x130 nhi_probe+0x1dd/0x330 pci_device_probe+0xd2/0x150 really_probe+0xee/0x280 driver_probe_device+0x50/0xc0 bus_for_each_drv+0x84/0xd0 __device_attach+0xe4/0x150 pci_bus_add_device+0x4e/0x70 pci_bus_add_devices+0x2e/0x66 pci_bus_add_devices+0x59/0x66 pci_bus_add_devices+0x59/0x66 enable_slot+0x344/0x450 acpiphp_check_bridge.part.0+0x119/0x150 acpiphp_hotplug_notify+0xaa/0x140 acpi_device_hotplug+0xa2/0x3f0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x234/0x580 worker_thread+0x50/0x3b0 kthread+0x10a/0x140 ret_from_fork+0x3a/0x50 -> #0 (pci_rescan_remove_lock){+.+.}: __lock_acquire+0xe54/0x1ac0 lock_acquire+0xb8/0x1b0 __mutex_lock+0xac/0x9a0 authorized_store+0xe8/0x210 kernfs_fop_write+0x125/0x1b0 vfs_write+0xc2/0x1d0 ksys_write+0x6c/0xf0 do_syscall_64+0x50/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&tb->lock); lock(pci_rescan_remove_lock); lock(&tb->lock); lock(pci_rescan_remove_lock); *** DEADLOCK *** 5 locks held by pool-/usr/lib/b/1258: #0: 000000003df1a1ad (&f->f_pos_lock){+.+.}, at: __fdget_pos+0x4d/0x60 #1: 0000000095a40b02 (sb_writers#6){.+.+}, at: vfs_write+0x185/0x1d0 #2: 0000000017a7d714 (&of->mutex){+.+.}, at: kernfs_fop_write+0xf2/0x1b0 #3: 000000004f262981 (kn->count#208){.+.+}, at: kernfs_fop_write+0xfa/0x1b0 #4: 00000000bfb796b5 (&tb->lock){+.+.}, at: authorized_store+0x7c/0x210 stack backtrace: CPU: 0 PID: 1258 Comm: pool-/usr/lib/b Tainted: G T 5.3.0-rc6+ #1 On an system using ACPI hotplug the host router gets hotplugged first and then the firmware starts sending notifications about connected devices so the above scenario should not happen in reality. However, after taking a second look at commit a03e828915c0 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") that introduced the locking, I don't think it is actually correct. It may have cured the symptom but probably the real root cause was somewhere closer to PCI stack and possibly is already fixed with recent kernels. I also tried to reproduce the original issue with the commit reverted but could not. So to keep lockdep happy and the code bit less complex drop calls to pci_lock_rescan_remove()/pci_unlock_rescan_remove() in tb_switch_set_authorized() effectively reverting a03e828915c0. Link: https://lkml.org/lkml/2019/8/30/513 Fixes: a03e828915c0 ("thunderbolt: Serialize PCIe tunnel creation with PCI rescan") Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-08thunderbolt: Read DP IN adapter first two dwords in one goMika Westerberg
When we discover existing DP tunnels the code checks whether DP IN adapter port is enabled by calling tb_dp_port_is_enabled() before it continues the discovery process. On Light Ridge (gen 1) controller reading only the first dword of the DP IN config space causes subsequent access to the same DP IN port path config space to fail or return invalid data as can be seen in the below splat: thunderbolt 0000:07:00.0: CFG_ERROR(0:d): Invalid config space or offset Call Trace: tb_cfg_read+0xb9/0xd0 __tb_path_deactivate_hop+0x98/0x210 tb_path_activate+0x228/0x7d0 tb_tunnel_restart+0x95/0x200 tb_handle_hotplug+0x30e/0x630 process_one_work+0x1b4/0x340 worker_thread+0x44/0x3d0 kthread+0xeb/0x120 ? process_one_work+0x340/0x340 ? kthread_park+0xa0/0xa0 ret_from_fork+0x1f/0x30 If both DP In adapter config dwords are read in one go the issue does not reproduce. This is likely firmware bug but we can work it around by always reading the two dwords in one go. There should be no harm for other controllers either so can do it unconditionally. Link: https://lkml.org/lkml/2019/8/28/160 Reported-by: Brad Campbell <lists2009@fnarfbargle.com> Tested-by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-26thunderbolt: Add support for Intel Ice LakeMika Westerberg
The Thunderbolt controller is integrated into the Ice Lake CPU itself and requires special flows to power it on and off using force power bit in NHI VSEC registers. Runtime PM (RTD3) and Sx flows also differ from the discrete solutions. Now the firmware notifies the driver whether RTD3 entry or exit are possible. The driver is responsible of sending Go2Sx command through link controller mailbox when system enters Sx states (suspend-to-mem/disk). Rest of the ICM firwmare flows follow Titan Ridge. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Expose active parts of NVM even if upgrade is not supportedMika Westerberg
Ice Lake Thunderbolt controller NVM firmware is part of the BIOS image which means it is not writable through the DMA port anymore. However, we can still read it so we can keep nvm_version and active parts of NVM. This way users still can find out the active NVM version and other potentially useful information directly from Linux. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Hide switch attributes that are not setMika Westerberg
Thunderbolt host routers may not always contain DROM that includes device identification information. This is mostly needed for Ice Lake systems but some Falcon Ridge controllers on PCs also do not have DROM. In that case hide the identification attributes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Do not fail adding switch if some port is not implementedMika Westerberg
There are two ways to mark a port as unimplemented. Typical way is to return port type as TB_TYPE_INACTIVE when its config space is read. Alternatively if the port is not physically present (such as ports 10 and 11 in ICL) reading from port config space returns TB_CFG_ERROR_INVALID_CONFIG_SPACE instead. Currently the driver bails out from adding the switch if it receives any error during port inititialization which is wrong. Handle this properly and just leave the port as TB_TYPE_INACTIVE before continuing to the next port. This also allows us to get rid of special casing for Light Ridge port 5 in eeprom.c. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Use 32-bit writes when writing ring producer/consumerMika Westerberg
The register access should be using 32-bit reads/writes according to the datasheet. With the previous generation hardware 16-bit writes have been working but starting with ICL this is not the case anymore so fix producer/consumer register update to use correct width register address. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Move NVM upgrade support flag to struct icmMika Westerberg
This is depends on the controller and on the platform/CPU we are running. Move it to struct icm so we can set it per controller. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26thunderbolt: Correct path indices for PCIe tunnelMika Westerberg
PCIe tunnel path indices got mixed up when we added support for tunnels between switches that are not adjacent. This did not affect the functionality as it is just an index but fix it now nevertheless to make the code easier to understand. Reported-by: Rajmohan Mani <rajmohan.mani@intel.com> Fixes: 8c7acaaf020f ("thunderbolt: Extend tunnel creation to more than 2 adjacent switches") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
2019-08-06thunderbolt: Show key using %*pE not %*pEpJ. Bruce Fields
%*pEp (without "h" or "o") is a no-op. This string could contain arbitrary (non-NULL) characters, so we do want escaping. Use %*pE like every other caller. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-06thunderbolt: Switch to use device_property_count_uXX()Andy Shevchenko
Use device_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-06-24bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose
There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14thunderbolt: Implement CIO reset correctly for Titan RidgeMika Westerberg
When starting ICM firmware on Apple systems we need to perform CIO reset as part of the flow. However, it turns out that the reset register has changed to another location in Titan Ridge. Fix this by introducing ->cio_reset() callback with corresponding implementations for Alpine and Titan Ridge. Fixes: c4630d6ae6e3 ("thunderbolt: Start firmware on Titan Ridge Apple systems") Reported-by: Peter Bowen <pzb@amazon.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-12thunderbolt: Make sure device runtime resume completes before taking domain lockMika Westerberg
When a device is authorized from userspace by writing to authorized attribute we first take the domain lock and then runtime resume the device in question. There are two issues with this. First is that the device connected notifications are blocked during this time which means we get them only after the authorization operation is complete. Because of this the authorization needed flag from the firmware notification is not reflecting the real authorization status anymore. So what happens is that the "authorized" keeps returning 0 even if the device was already authorized properly. Second issue is that each time the controller is runtime resumed the connection_id field of device connected notification may be different than in the previous resume. We need to use the latest connection_id otherwise the firmware rejects the authorization command. Fix these by moving runtime resume operations to happen before the domain lock is taken, and waiting for the updated device connected notification from the firmware before we allow runtime resume of a device to complete. While there add missing locking to tb_switch_nvm_read(). Fixes: 09f11b6c99fe ("thunderbolt: Take domain lock in switch sysfs attribute callbacks") Reported-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge tag 'char-misc-5.2-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc update part 2 from Greg KH: "Here is the "real" big set of char/misc driver patches for 5.2-rc1 Loads of different driver subsystem stuff in here, all over the places: - thunderbolt driver updates - habanalabs driver updates - nvmem driver updates - extcon driver updates - intel_th driver updates - mei driver updates - coresight driver updates - soundwire driver cleanups and updates - fastrpc driver updates - other minor driver updates - chardev minor fixups Feels like this tree is getting to be a dumping ground of "small driver subsystems" these days. Which is fine with me, if it makes things easier for those subsystem maintainers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) intel_th: msu: Add current window tracking intel_th: msu: Add a sysfs attribute to trigger window switch intel_th: msu: Correct the block wrap detection intel_th: Add switch triggering support intel_th: gth: Factor out trace start/stop intel_th: msu: Factor out pipeline draining intel_th: msu: Switch over to scatterlist intel_th: msu: Replace open-coded list_{first,last,next}_entry variants intel_th: Only report useful IRQs to subdevices intel_th: msu: Start handling IRQs intel_th: pci: Use MSI interrupt signalling intel_th: Communicate IRQ via resource intel_th: Add "rtit" source device intel_th: Skip subdevices if their MMIO is missing intel_th: Rework resource passing between glue layers and core intel_th: SPDX-ify the documentation intel_th: msu: Fix single mode with IOMMU coresight: funnel: Support static funnel dt-bindings: arm: coresight: Unify funnel DT binding coresight: replicator: Add new device id for static replicator ...
2019-04-25thunderbolt: Make priority unsigned in struct tb_pathNathan Chancellor
Clang warns: drivers/thunderbolt/tunnel.c:504:17: warning: implicit truncation from 'int' to bit-field changes value from 5 to -3 [-Wbitfield-constant-conversion] path->priority = 5; ^ ~ 1 warning generated. The priority member in struct tb_path is only ever assigned a positive number: $ rg -n priority drivers/thunderbolt/path.c drivers/thunderbolt/tunnel.c:99: path->priority = 3; drivers/thunderbolt/tunnel.c:308: path->priority = 2; drivers/thunderbolt/tunnel.c:323: path->priority = 1; drivers/thunderbolt/tunnel.c:504: path->priority = 5; Furthermore, that value is only assigned to an unsigned integer in tb_path_activate (the priority member in struct tb_regs_hop). Fixes: 44242d6c9703 ("thunderbolt: Add support for DMA tunnels") Link: https://github.com/ClangBuiltLinux/linux/issues/454 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-25crypto: shash - remove shash_desc::flagsEric Biggers
The flags field in 'struct shash_desc' never actually does anything. The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP. However, no shash algorithm ever sleeps, making this flag a no-op. With this being the case, inevitably some users who can't sleep wrongly pass MAY_SLEEP. These would all need to be fixed if any shash algorithm actually started sleeping. For example, the shash_ahash_*() functions, which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP from the ahash API to the shash API. However, the shash functions are called under kmap_atomic(), so actually they're assumed to never sleep. Even if it turns out that some users do need preemption points while hashing large buffers, we could easily provide a helper function crypto_shash_update_large() which divides the data into smaller chunks and calls crypto_shash_update() and cond_resched() for each chunk. It's not necessary to have a flag in 'struct shash_desc', nor is it necessary to make individual shash algorithms aware of this at all. Therefore, remove shash_desc::flags, and document that the crypto_shash_*() functions can be called from any context. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18thunderbolt: Start firmware on Titan Ridge Apple systemsMika Westerberg
Titan Ridge flow to start the firmware is the same as Alpine Ridge so we can do the same on Titan Ridge based Apple systems. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Reword output of tb_dump_hop()Mika Westerberg
While tb_dump_hop() prints out necessary information it is in format that is quite hard to read from the logs especially when one needs to follow the path to see that the setup is correct. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Make rest of the logging to happen at debug levelMika Westerberg
Now that the driver can handle every possible tunnel types there is no point to log everything as info level so turn these to happen at debug level instead. While at it remove duplicated tunnel activation log message (tb_tunnel_activate() calls tb_tunnel_restart() which print the same message) and add one missing '\n' termination. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Make __TB_[SW|PORT]_PRINT take const parametersMika Westerberg
The printing macros do not modify the passed object so make them const. While there make tb_route() to take const parameter as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add support for XDomain connectionsMika Westerberg
Two domains (hosts) can be connected through a Thunderbolt cable and in that case they can start software services such as networking over the high-speed DMA paths. Now that we have all the basic building blocks in place to create DMA tunnels over the Thunderbolt fabric we can add this support to the software connection manager as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Make tb_switch_alloc() return ERR_PTR()Mika Westerberg
In order to detect possible connections to other domains we need to be able to find out why tb_switch_alloc() fails so make it return ERR_PTR() instead. This allows the caller to differentiate between errors such as -ENOMEM which comes from the kernel and for instance -EIO which comes from the hardware when trying to access the possible switch. Convert all the current call sites to handle this properly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add support for DMA tunnelsMika Westerberg
In addition to PCIe and Display Port tunnels it is also possible to create tunnels that forward DMA traffic from the host interface adapter (NHI) to a NULL port that is connected to another domain through a Thunderbolt cable. These tunnels can be used to carry software messages such as networking packets. To support this we introduce another tunnel type (TB_TUNNEL_DMA) that supports paths from NHI to NULL port and back. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add XDomain UUID exchange supportMika Westerberg
Currently ICM has been handling XDomain UUID exchange so there was no need to have it in the driver yet. However, since now we are going to add the same capabilities to the software connection manager it needs to be handled properly. For this reason modify the driver XDomain protocol handling so that if the remote domain UUID is not filled in the core will query it first and only then start the normal property exchange flow. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Run tb_xdp_handle_request() in system workqueueMika Westerberg
We run all XDomain requests during discovery in tb->wq and since it only runs one work at the time it means that sending back reply to the other domain may be delayed too much depending whether there is an active XDomain discovery request running. To make sure we can send reply to the other domain as soon as possible run tb_xdp_handle_request() in system workqueue instead. Since the device can be hot-removed in the middle we need to make sure the domain structure is still around when the function is run so increase reference count before we schedule the reply work. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Do not tear down tunnels when driver is unloadedMika Westerberg
Now that we have capability to discover existing tunnels during driver load there is no point tearing down tunnels when the driver gets unloaded. Instead we can just leave them running. If user disconnects devices while there is no Thunderbolt driver loaded, tunneled protocol hotplug happens and is handled by the corresponding driver (pciehp in case of PCIe tunnel, GFX driver in case of DP tunnel). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add support for Display Port tunnelsMika Westerberg
Display Port tunnels are somewhat more complex than PCIe tunnels as it requires 3 tunnels (AUX Rx/Tx and Video). In addition we are not supposed to create the tunnels immediately when a DP OUT is enumerated. Instead we need to wait until we get hotplug event to that adapter port or check if the port has HPD set before tunnels can be established. This adds Display Port tunneling support to the software connection manager. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Rework NFC credits handlingMika Westerberg
NFC (non flow control) credits is actually 20-bit field so update tb_port_add_nfc_credits() to handle this properly. This allows us to set NFC credits for Display Port path in subsequent patches. Also make sure the function does not update the hardware if the underlying switch is already unplugged. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Generalize port finding routines to support all port typesMika Westerberg
We will be needing these routines to find Display Port adapters as well so modify them to take port type as the second parameter. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Scan only valid NULL adapter ports in hotplugMika Westerberg
The only way to expand Thunderbolt topology is through the NULL adapter ports (typically ports 1, 2, 3 and 4). There is no point handling Thunderbolt hotplug events on any other port. Add a helper function (tb_port_is_null()) that can be used to determine if the port is NULL port, and use it in software connection manager code when hotplug event is handled. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add support for full PCIe daisy chainsMika Westerberg
Currently the software connection manager (tb.c) has only supported creating a single PCIe tunnel, no PCIe device daisy chaining has been supported so far. This updates the software connection manager so that it now can create PCIe tunnels for full chain of six devices. Because PCIe allows DMA and opens possibility for DMA attacks we change security level to "user" meaning that PCIe tunneling requires that the userspace authorizes the devices first. This makes it possible to block PCIe tunneling completely while still allowing other types of tunnels to be automatically created. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Discover preboot PCIe paths the boot firmware establishedMika Westerberg
In Apple Macs the boot firmware (EFI) connects all devices automatically when the system is started, before it hands over to the OS. Instead of ignoring we discover all those PCIe tunnels and record them using our internal structures, just like we do when a device is connected after the OS is already up. By doing this we can properly tear down tunnels when devices are disconnected. Also this allows us to resume the existing tunnels after system suspend/resume cycle. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Deactivate all paths before restarting themMika Westerberg
State of the connected devices and tunnel configuration is not known during resume. For example some paths may not be complete anymore if the user has unplugged the related devices. So instead of marking all paths as inactive we go ahead and deactivate them explicitly before we restart them. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Extend tunnel creation to more than 2 adjacent switchesMika Westerberg
Now that we can allocate hop IDs per port on a path, we can take advantage of this and create tunnels covering longer paths than just between two adjacent switches. PCIe actually does not need this as it is typically a daisy chain between two adjacent switches but this way we do not need to hard-code creation of the tunnel. While there add name to struct tb_path to make debugging easier, and update kernel-doc comments. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add helper function to iterate from one port to anotherMika Westerberg
We need to be able to walk from one port to another when we are creating paths where there are multiple switches between two ports. For this reason introduce a new function tb_next_port_on_path(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de>
2019-04-18thunderbolt: Assign remote for both ports in case of dual linkMika Westerberg
Currently the driver only assigns remote port for the primary port if in case of dual link. This makes things such as walking from one port to another more complex than necessary because the code needs to change from secondary to primary port if the path that is established is created using secondary links. In order to always assign both remote pointers we need to prevent the scanning code from following the secondary link. Failing to do that might cause problems as the same switch may be enumerated twice (or removed in case of unplug). Handle that properly by introducing a new function tb_port_has_remote() that returns true only for the primary port. We also update tb_is_upstream_port() to support both dual link ports, make it take const port pointer and move it below tb_upstream_port() to keep similar functions close. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add functions for allocating and releasing HopIDsMika Westerberg
Each port has a separate path configuration space that is used for finding the next hop (switch) in the path. HopID is an index to this configuration space. HopIDs 0 - 7 are reserved by the protocol. In order to get next available HopID for each direction we provide two pairs of helper functions that can be used to allocate and release HopIDs for a given port. While there remove obsolete TODO comment. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Generalize tunnel creation functionalityMika Westerberg
To be able to tunnel non-PCIe traffic, separate tunnel functionality into generic and PCIe specific parts. Rename struct tb_pci_tunnel to tb_tunnel, and make it hold an array of paths instead of just two. Update all the tunneling functions to take this structure as parameter. We also move tb_pci_port_active() to switch.c (and rename it) where we will be keeping all port and switch related functions. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Rename tunnel_pci to tunnelMika Westerberg
In order to tunnel non-PCIe traffic as well rename tunnel_pci.[ch] to tunnel.[ch] to reflect this fact. No functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Cache adapter specific capability offset into struct portMika Westerberg
The adapter specific capability either is there or not if the port does not hold an adapter. Instead of always finding it on-demand we read the offset just once when the port is initialized. While there we update the struct port documentation to follow kernel-doc format. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Properly disable pathMika Westerberg
We need to wait until all buffers have been drained before the path can be considered disabled. Do this for every hop in a path. This adds another bit field to struct tb_regs_hop even if we are trying to get rid of them but we can clean them up another day. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Set sleep bit when suspending switchMika Westerberg
Thunderbolt 2 devices and beyond link controller needs to be notified when a switch is going to be suspended by setting bit 31 in LC_SX_CTRL register. Add this functionality to the software connection manager. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Configure lanes when switch is initializedMika Westerberg
Thunderbolt 2 devices and beyond need to have additional bits set in link controller specific registers. This includes two bits in LC_SX_CTRL that tell the link controller which lane is connected and whether it is upstream facing or not. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Move LC specific functionality into a separate fileMika Westerberg
We will be adding more link controller functionality in subsequent patches and it does not make sense to keep all that in switch.c, so separate LC functionality into its own file. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-04-18thunderbolt: Add dummy read after port capability list walk on Light RidgeMika Westerberg
Light Ridge has an issue where reading the next capability pointer location in port config space the read data is not cleared. It is fine to read capabilities each after another so only thing we need to do is to make sure we issue dummy read after tb_port_find_cap() is finished to avoid the issue in next read. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>