summaryrefslogtreecommitdiff
path: root/drivers/thunderbolt
AgeCommit message (Collapse)Author
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-06thunderbolt: tb: fix use after free in tb_activate_pcie_devicesGustavo A. R. Silva
Add a ̣̣continue statement in order to avoid using a previously free'd pointer tunnel in list_add. Addresses-Coverity-ID: 1415336 Fixes: 9d3cce0b6136 ("thunderbolt: Introduce thunderbolt bus and connection manager") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27thunderbolt: Drop sequence number check from tb_xdomain_match()Mika Westerberg
Commit 9a03c3d398c1 ("thunderbolt: Fix a couple right shifting to zero bugs") revealed an issue that was previously hidden because we never actually compared received XDomain message sequence numbers properly. The idea with these sequence numbers is that the responding host uses the same sequence number that was in the request packet which we can then check at the requesting host. However, testing against macOS it looks like it does not follow this but instead uses some other logic. Windows driver on the other hand handles it the same way than Linux. In order to be able to talk to macOS again, fix this so that we drop the whole sequence number check. This effectively works exactly the same than it worked before the aforementioned commit. This also follows the logic the original P2P networking code used. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19thunderbolt: Fix a couple right shifting to zero bugsDan Carpenter
The problematic code looks like this: res_seq = res_hdr->xd_hdr.length_sn & TB_XDOMAIN_SN_MASK; res_seq >>= TB_XDOMAIN_SN_SHIFT; TB_XDOMAIN_SN_SHIFT is 27, and right shifting a u8 27 bits is always going to result in zero. The fix is to declare these variables as u32. Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09thunderbolt: Initialize Thunderbolt bus earlierMika Westerberg
The 0day kbuild robot reports following crash: BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: tb_property_find+0xe/0x41 *pde = 00000000 Oops: 0000 [#1] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.0-rc1-00741-ge69b6c0 #412 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 task: 89c80000 task.stack: 89c7c000 EIP: tb_property_find+0xe/0x41 EFLAGS: 00210246 CPU: 0 EAX: 00000000 EBX: 7a368f47 ECX: 00000044 EDX: 7a368f47 ESI: 8851d340 EDI: 7a368f47 EBP: 89c7df0c ESP: 89c7defc DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 80050033 CR2: 00000004 CR3: 027a2000 CR4: 00000690 Call Trace: tb_register_property_dir+0x49/0xb9 ? cdc_mbim_driver_init+0x1b/0x1b tbnet_init+0x77/0x9f ? cdc_mbim_driver_init+0x1b/0x1b do_one_initcall+0x7e/0x145 ? parse_args+0x10c/0x1b3 ? kernel_init_freeable+0xbe/0x159 kernel_init_freeable+0xd1/0x159 ? rest_init+0x110/0x110 kernel_init+0xd/0xd0 ret_from_fork+0x19/0x30 The reason is that both Thunderbolt bus and thunderbolt-net are build into the kernel image, and the latter is linked first because drivers/net comes before drivers/thunderbolt. Since both use module_init() thunderbolt-net ends up calling Thunderbolt bus functions too early triggering the above crash. Fix this by moving Thunderbolt bus initialization to happen earlier to make sure all the data structures are ready when Thunderbolt service drivers are initialized. To be on the safe side also add a check for properly initialized xdomain_property_dir to tb_register_property_dir(). Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Allocate ring HopID automatically if requestedMika Westerberg
Thunderbolt services should not care which HopID (ring) they use for sending and receiving packets over the high-speed DMA path, so make tb_ring_alloc_rx() and tb_ring_alloc_tx() accept negative HopID. This means that the NHI will allocate next available HopID for the caller automatically. These HopIDs will be allocated from the range which is not reserved for the Thunderbolt protocol (8 .. hop_count - 1). The allocated HopID can be retrieved from ring->hop field after the ring has been allocated successfully if needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add polling mode for ringsMika Westerberg
In order to support things like networking over Thunderbolt cable, there needs to be a way to switch the ring to a mode where it can be polled with the interrupt masked. We implement such mode so that the caller can allocate a ring by passing pointer to a function that is then called when an interrupt is triggered. Completed frames can be fetched using tb_ring_poll() and the interrupt can be re-enabled when the caller is finished with polling by using tb_ring_poll_complete(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Use spinlock in NHI serializationMika Westerberg
This is needed because ring polling functionality can be called from atomic contexts when networking and other high-speed traffic is transferred over a Thunderbolt cable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Use spinlock in ring serializationMika Westerberg
This makes it possible to enqueue frames also from atomic context which is needed for example, when networking packets are sent over a Thunderbolt cable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move ring descriptor flags to thunderbolt.hMika Westerberg
A Thunderbolt service driver might need to check if there was an error with the descriptor when in frame mode. We also add two Rx specific error flags RING_DESC_CRC_ERROR and RING_DESC_BUFFER_OVERRUN. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Export ring handling functions to modulesMika Westerberg
These are used by Thunderbolt services to send and receive frames over the high-speed DMA rings. We also put the functions to tb_ namespace to make sure we do not collide with others and add missing kernel-doc comments for the exported functions. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for frame modeMika Westerberg
When high-speed DMA paths are used to transfer arbitrary data over a Thunderbolt link, DMA rings should be in frame mode instead of raw mode. The latter is used by the control channel (ring 0). In frame mode each data frame can hold up to 4kB payload. This patch modifies the DMA ring code to allow configuring a ring to be in frame mode by passing a new flag (RING_FLAG_FRAME) to the ring when it is allocated. In addition there might be need to enable end-to-end (E2E) workaround for the ring to prevent losing Rx frames in certain situations. We add another flag (RING_FLAG_E2E) that can be used for this purpose. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Configure interrupt throttling for all interruptsMika Westerberg
This will keep the interrupt delivery rate reasonable. The value used here (128 us) is a recommendation from the hardware people. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for XDomain discovery protocolMika Westerberg
When two hosts are connected over a Thunderbolt cable, there is a protocol they can use to communicate capabilities supported by the host. The discovery protocol uses automatically configured control channel (ring 0) and is build on top of request/response transactions using special XDomain primitives provided by the Thunderbolt base protocol. The capabilities consists of a root directory block of basic properties used for identification of the host, and then there can be zero or more directories each describing a Thunderbolt service and its capabilities. Once both sides have discovered what is supported the two hosts can setup high-speed DMA paths and transfer data to the other side using whatever protocol was agreed based on the properties. The software protocol used to communicate which DMA paths to enable is service specific. This patch adds support for the XDomain discovery protocol to the Thunderbolt bus. We model each remote host connection as a Linux XDomain device. For each Thunderbolt service found supported on the XDomain device, we create Linux Thunderbolt service device which Thunderbolt service drivers can then bind to based on the protocol identification information retrieved from the property directory describing the service. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move tb_switch_phy_port_from_link() to thunderbolt.hMika Westerberg
A Thunderbolt service might need to find the physical port from a link the cable is connected to. For instance networking driver uses this information to generate MAC address according the Apple ThunderboltIP protocol. Move this function to thunderbolt.h and rename it to tb_phy_port_from_link() to reflect the fact that it does not take switch as parameter. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move thunderbolt domain structure to thunderbolt.hMika Westerberg
These are needed by Thunderbolt services so move them to thunderbolt.h to make sure they are available outside of drivers/thunderbolt. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Move enum tb_cfg_pkg_type to thunderbolt.hMika Westerberg
These will be needed by Thunderbolt services when sending and receiving XDomain control messages. While there change TB_CFG_PKG_PREPARE_TO_SLEEP value to be decimal in order to be consistent with other members. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Add support for XDomain propertiesMika Westerberg
Thunderbolt XDomain discovery protocol uses directories which contain properties and other directories to exchange information about what capabilities the remote host supports. This also includes identification information like device ID and name. This adds support for parsing and formatting these properties and establishes an API drivers can use in addition to the core Thunderbolt driver. This API is exposed in a new header: include/linux/thunderbolt.h. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02thunderbolt: Remove __packed from ICM message structuresMika Westerberg
These messages are all 32-bit aligned and they should be packed without the __packed attribute just fine. It also allows compiler to generate better code on some architectures. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-02byteorder: Move {cpu_to_be32, be32_to_cpu}_array() from Thunderbolt to coreMika Westerberg
We will be using these when communicating XDomain discovery protocol over Thunderbolt link but they might be useful for other drivers as well. Make them available through byteorder/generic.h. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05Merge tag 'acpi-4.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These include a usual ACPICA code update (this time to upstream revision 20170728), a fix for a boot crash on some systems with Thunderbolt devices connected at boot time, a rework of the handling of PCI bridges when setting up device wakeup, new support for Apple device properties, support for DMA configurations reported via ACPI on ARM64, APEI-related updates, ACPI EC driver updates and assorted minor modifications in several places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20170728 including: * Alias operator handling update (Bob Moore). * Deferred resolution of reference package elements (Bob Moore). * Support for the _DMA method in walk resources (Bob Moore). * Tables handling update and support for deferred table verification (Lv Zheng). * Update of SMMU models for IORT (Robin Murphy). * Compiler and disassembler updates (Alex James, Erik Schmauss, Ganapatrao Kulkarni, James Morse). * Tools updates (Erik Schmauss, Lv Zheng). * Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv Zheng, Shao Ming). - Rework the initialization of non-wakeup GPEs with method handlers in order to address a boot crash on some systems with Thunderbolt devices connected at boot time where we miss an early hotplug event due to a delay in GPE enabling (Rafael Wysocki). - Rework the handling of PCI bridges when setting up ACPI-based device wakeup in order to avoid disabling wakeup for bridges prematurely (Rafael Wysocki). - Consolidate Apple DMI checks throughout the tree, add support for Apple device properties to the device properties framework and use these properties for the handling of I2C and SPI devices on Apple systems (Lukas Wunner). - Add support for _DMA to the ACPI-based device properties lookup code and make it possible to use the information from there to configure DMA regions on ARM64 systems (Lorenzo Pieralisi). - Fix several issues in the APEI code, add support for exporting the BERT error region over sysfs and update APEI MAINTAINERS entry with reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit Agrawal, Tony Luck, Yazen Ghannam). - Fix a potential initialization ordering issue in the ACPI EC driver and clean it up somewhat (Lv Zheng). - Update the ACPI SPCR driver to extend the existing XGENE 8250 workaround in it to a new platform (m400) and to work around an Xgene UART clock issue (Graeme Gregory). - Add a new utility function to the ACPI core to support using ACPI OEM ID / OEM Table ID / Revision for system identification in blacklisting or similar and switch over the existing code already using this information to this new interface (Toshi Kani). - Fix an xpower PMIC issue related to GPADC reads that always return 0 without extra pin manipulations (Hans de Goede). - Add statements to print debug messages in a couple of places in the ACPI core for easier diagnostics (Rafael Wysocki). - Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun Guo). - Clean up the ACPI x86 boot code somewhat (Andy Shevchenko). - Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver (Alex Hung). - Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal, Ronald Tschalär, Sumeet Pawnikar)" * tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits) ACPI / APEI: Suppress message if HEST not present intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list() ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: make device_attribute const ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region ACPI: APEI: fix the wrong iteration of generic error status block ACPI / processor: make function acpi_processor_check_duplicates() static ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time ACPI: SPCR: work around clock issue on xgene UART ACPI: SPCR: extend XGENE 8250 workaround to m400 ACPI / LPSS: Don't abort ACPI scan on missing mem resource mailbox: pcc: Drop uninformative output during boot ACPI/IORT: Add IORT named component memory address limits ...
2017-09-03Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple'Rafael J. Wysocki
* acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks
2017-08-28thunderbolt: Fix reset response_typeDan Carpenter
There is a mistake here where we accidentally use sizeof(TB_CFG_PKG_RESET) instead of just TB_CFG_PKG_RESET. The size of an int is 4 so it's the same as TB_CFG_PKG_NOTIFY_ACK. Fixes: d7f781bfdbf4 ("thunderbolt: Rework control channel to be more reliable") Reported-by: Colin King <colin.king@canonical.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable <stable@vger.kernel.org> # 4.13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28thunderbolt: Allow clearing the keyBernat, Yehezkel
If secure authentication of a devices fails, either because the device already has another key uploaded, or there is some other error sending challenge to the device, and the user only wants to approve the device just once (without a new key being uploaded to the device) the current implementation does not allow this because the key cannot be cleared once set even if we allow it to be changed. Make this scenario possible and allow clearing the key by writing empty string to the key sysfs file. Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28thunderbolt: Make key root-only accessibleBernat, Yehezkel
Non-root user may read the key back after root wrote it there. This removes read access to everyone but root. Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28thunderbolt: Remove superfluous checkBernat, Yehezkel
The key size is tested by hex2bin() already (as '\0' isn't an hex digit) Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-13Merge tag 'char-misc-4.13-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two patches for 4.13-rc5. One is a fix for a reported thunderbolt issue, and the other a fix for an MEI driver issue. Both have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Do not enumerate more ports from DROM than the controller has mei: exclude device from suspend direct complete optimization
2017-08-10thunderbolt: Do not enumerate more ports from DROM than the controller hasMika Westerberg
Some Alpine Ridge LP DROMs (there might be others) erroneusly list more ports than the controller actually has. Most probably because DROM of the full Dual/Single port Thunderbolt controller was reused for LP version. The current DROM parser does not check the upper bound thus it leads to crash when sw->ports[] is accessed over bounds: BUG: unable to handle kernel NULL pointer dereference at 00000000000002ec IP: tb_drom_read+0x383/0x890 [thunderbolt] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 3 PID: 12248 Comm: systemd-udevd Not tainted 4.13.0-rc1-next-20170719 #1 Hardware name: LENOVO 20HF000YGE/20HF000YGE, BIOS N1WET32W (1.11 ) 05/23/2017 task: ffff8a293e4bcd80 task.stack: ffffa698027a8000 RIP: 0010:tb_drom_read+0x383/0x890 [thunderbolt] RSP: 0018:ffffa698027ab990 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8a2940af7800 RCX: 0000000000000000 RDX: ffff8a2940ebb400 RSI: 0000000000000000 RDI: ffffa698027ab9a0 RBP: ffffa698027ab9d0 R08: 0000000000000001 R09: 0000000000000002 R10: ffff8a2940ebb5b0 R11: 0000000000000000 R12: ffff8a293bfa968c R13: 000000000000002c R14: 0000000000000056 R15: 0000000000000056 FS: 00007f0a945a38c0(0000) GS:ffff8a2961580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ec CR3: 000000043e785000 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tb_switch_add+0x9d/0x730 [thunderbolt] ? tb_switch_alloc+0x3cd/0x4d0 [thunderbolt] icm_start+0x5a/0xa0 [thunderbolt] tb_domain_add+0xc3/0xf0 [thunderbolt] nhi_probe+0x19e/0x310 [thunderbolt] local_pci_probe+0x42/0xa0 pci_device_probe+0x18d/0x1a0 driver_probe_device+0x2ff/0x450 __driver_attach+0xa4/0xe0 ? driver_probe_device+0x450/0x450 bus_for_each_dev+0x6e/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1d0/0x270 ? 0xffffffffc0bbb000 driver_register+0x60/0xe0 ? 0xffffffffc0bbb000 __pci_register_driver+0x4c/0x50 nhi_init+0x28/0x1000 [thunderbolt] do_one_initcall+0x50/0x190 ? __vunmap+0x81/0xb0 ? _cond_resched+0x1a/0x50 ? kmem_cache_alloc_trace+0x15f/0x1c0 ? do_init_module+0x27/0x1e9 do_init_module+0x5f/0x1e9 load_module+0x24e7/0x2a60 ? vfs_read+0x115/0x130 SYSC_finit_module+0xfc/0x120 ? SYSC_finit_module+0xfc/0x120 SyS_finit_module+0xe/0x10 do_syscall_64+0x67/0x170 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by making sure we only enumerate DROM port entries the hardware actually has. Reported-by: Christian Kellner <ckellner@redhat.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Tested-by: Christian Kellner <ckellner@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-03treewide: Consolidate Apple DMI checksLukas Wunner
We're about to amend ACPI bus scan with DMI checks whether we're running on a Mac to support Apple device properties in AML. The DMI checks are performed for every single device, adding overhead for everything x86 that isn't Apple, which is the majority. Rafael and Andy therefore request to perform the DMI match only once and cache the result. Outside of ACPI various other Apple DMI checks exist and it seems reasonable to use the cached value there as well. Rafael, Andy and Darren suggest performing the DMI check in arch code and making it available with a header in include/linux/platform_data/x86/. To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c to perform the DMI check and invoke it from setup_arch(). Switch over all existing Apple DMI checks, thereby fixing two deficiencies: * They are now #defined to false on non-x86 arches and can thus be optimized away if they're located in cross-arch code. * Some of them only match "Apple Inc." but not "Apple Computer, Inc.", which is used by BIOSes released between January 2006 (when the first x86 Macs started shipping) and January 2007 (when the company name changed upon introduction of the iPhone). Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Suggested-by: Darren Hart <dvhart@infradead.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-03Merge branches 'pm-core' and 'pm-misc'Rafael J. Wysocki
* pm-core: PM / runtime: Document new pm_runtime_set_suspended() constraint * pm-misc: thunderbolt: icm: Ignore mailbox errors in icm_suspend()
2017-07-31thunderbolt: icm: Ignore mailbox errors in icm_suspend()Rafael J. Wysocki
On one of my test machines nhi_mailbox_cmd() called from icm_suspend() times out and returnes an error which then is propagated to the caller and causes the entire system suspend to be aborted which isn't very useful. Instead of aborting system suspend, print the error into the log and continue. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Michael Jamet <michael.jamet@intel.com>
2017-07-25Merge tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuidLinus Torvalds
Pull uuid fixes from Christoph Hellwig: - add a missing "!" in the uuid tests - remove the last remaining user of the uuid_be type, and then the type and its helpers * tag 'uuid-for-4.13-2' of git://git.infradead.org/users/hch/uuid: uuid: remove uuid_be thunderbolt: use uuid_t instead of uuid_be uuid: fix incorrect uuid_equal conversion in test_uuid_test
2017-07-24thunderbolt: use uuid_t instead of uuid_beChristoph Hellwig
Switch thunderbolt to the new uuid type. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2017-07-17thunderbolt: Correct access permissions for active NVM contentsMika Westerberg
Firmware upgrade tools that decide which NVM image should be uploaded to the Thunderbolt controller need to access active parts of the NVM even if they are not run as root. The information in active NVM is not considered security critical so we can use the default permissions set by the NVMem framework. Writing the NVM image is still left as root only operation. While there mark the active NVM as read-only in the filesystem. Reported-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: fix spelling mistake: "missmatch" -> "mismatch"Colin Ian King
Trivial fix to spelling mistake in tb_sw_warn warning message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add support for host and device NVM firmware upgradeMika Westerberg
Starting from Intel Falcon Ridge the NVM firmware can be upgraded by using DMA configuration based mailbox commands. If we detect that the host or device (device support starts from Intel Alpine Ridge) has the DMA configuration based mailbox we expose NVM information to the userspace as two separate Linux NVMem devices: nvm_active and nvm_non_active. The former is read-only portion of the active NVM which firmware upgrade tools can be use to find out suitable NVM image if the device identification strings are not enough. The latter is write-only portion where the new NVM image is to be written by the userspace. It is up to the userspace to find out right NVM image (the kernel does very minimal validation). The ICM firmware itself authenticates the new NVM firmware and fails the operation if it is not what is expected. We also expose two new sysfs files per each switch: nvm_version and nvm_authenticate which can be used to read the active NVM version and start the upgrade process. We also introduce safe mode which is the mode a switch goes when it does not have properly authenticated firmware. In this mode the switch only accepts a couple of commands including flashing a new NVM firmware image and triggering power cycle. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add support for Internal Connection Manager (ICM)Mika Westerberg
Starting from Intel Falcon Ridge the internal connection manager running on the Thunderbolt host controller has been supporting 4 security levels. One reason for this is to prevent DMA attacks and only allow connecting devices the user trusts. The internal connection manager (ICM) is the preferred way of connecting Thunderbolt devices over software only implementation typically used on Macs. The driver communicates with ICM using special Thunderbolt ring 0 (control channel) messages. In order to handle these messages we add support for the ICM messages to the control channel. The security levels are as follows: none - No security, all tunnels are created automatically user - User needs to approve the device before tunnels are created secure - User need to approve the device before tunnels are created. The device is sent a challenge on future connects to be able to verify it is actually the approved device. dponly - Only Display Port and USB tunnels can be created and those are created automatically. The security levels are typically configurable from the system BIOS and by default it is set to "user" on many systems. In this patch each Thunderbolt device will have either one or two new sysfs attributes: authorized and key. The latter appears for devices that support secure connect. In order to identify the device the user can read identication information, including UUID and name of the device from sysfs and based on that make a decision to authorize the device. The device is authorized by simply writing 1 to the "authorized" sysfs attribute. This is following the USB bus device authorization mechanism. The secure connect requires an additional challenge step (writing 2 to the "authorized" attribute) in future connects when the key has already been stored to the NVM of the device. Non-ICM systems (before Alpine Ridge) continue to use the existing functionality and the security level is set to none. For systems with Alpine Ridge, even on Apple hardware, we will use ICM. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Do not touch the hardware if the NHI is gone on resumeMika Westerberg
On PCs the NHI host controller is only present when there is a device connected. When the last device is disconnected the host controller will dissappear shortly (within 10s). Now if that happens when we are suspended we should not try to touch the hardware anymore, so add a flag for this and check it before we re-enable rings. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add support for DMA configuration based mailboxMika Westerberg
The DMA (NHI) port of a switch provides access to the NVM of the host controller (and devices starting from Intel Alpine Ridge). The NVM contains also more complete DROM for the root switch including vendor and device identification strings. This will look for the DMA port capability for each switch and if found populates sw->dma_port. We then teach tb_drom_read() to read the DROM information from NVM if available for the root switch. The DMA port capability also supports upgrading the NVM for both host controller and devices which will be added in subsequent patches. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Store Thunderbolt generation in the switch structureMika Westerberg
In some cases it is useful to know what is the Thunderbolt generation the switch supports. This introduces a new field to struct switch that stores the generation of the switch based on the device ID. Unknown switches (there should be none) are assumed to be first generation to be on the safe side. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add support for NHI mailboxMika Westerberg
The host controller includes two sets of registers that are used to communicate with the firmware. Add functions that can be used to access these registers. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Add new Thunderbolt PCI IDsMika Westerberg
Add Intel Win Ridge (Thunderbolt 2) and Alpine Ridge (Thunderbolt 3) controller PCI IDs to the list of supported devices. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Rework control channel to be more reliableMika Westerberg
If a request times out the response might arrive right after the request is failed. This response is pushed to the kfifo and next request will read it instead. Since it most likely will not pass our validation checks in parse_header() the next request will fail as well, and response to that request will be pushed to the kfifo, ad infinitum. We end up in a situation where all requests fail and no devices can be added anymore until the driver is unloaded and reloaded again. To overcome this, rework the control channel so that we will have a queue of outstanding requests. Each request will be handled in turn and the response is validated against what is expected. Unexpected packets (for example responses for requests that have been timed out) are dropped. This model is copied from Greybus implementation with small changes here and there to get it cope with Thunderbolt control packets. In addition the configuration packets support sequence number which the switch is supposed to copy from the request to response. We use this to drop responses that are already timed out. Taking advantage of the sequence number, we automatically retry configuration read/write 4 times before giving up. Also timeout is not a programming error so there is no need to trigger a scary backtrace (WARN), instead we just log a warning. After all Thunderbolt devices are hot-pluggable by definition which means user can unplug a device any time and that is totally acceptable. With this change there is no need to take the global domain lock when sending configuration packets anymore. This is useful when we add support for cross-domain (XDomain) communication later on. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Let the connection manager handle all notificationsMika Westerberg
Currently the control channel (ctl.c) handles the one supported notification (PLUG_EVENT) and sends back ACK accordingly. However, we are going to add support for the internal connection manager (ICM) that needs to handle a different notifications. So instead of dealing everything in the control channel, we change the callback to take an arbitrary thunderbolt packet and convert the native connection manager to handle the event itself. In addition we only push replies we know of to the response FIFO. Everything else is treated as notification (or request) and is expected to be dealt by the connection manager implementation. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Expose make_header() to other filesMika Westerberg
We will be using this function in files introduced in subsequent patches. While there the function is renamed to tb_cfg_make_header() following tb_cfg_get_route(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Expose get_route() to other filesMika Westerberg
We are going to use it when we change the connection manager to handle events itself. Also rename it to follow naming convention used in functions exposed in ctl.h. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Move control channel messages to tb_msgs.hMika Westerberg
We will be forwarding notifications received from the control channel to the connection manager implementations. This way they can decide what to do if anything when a notification is received. To be able to use control channel messages from other files, move them to tb_msgs.h. No functional changes intended. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09thunderbolt: Read vendor and device name from DROMMika Westerberg
The device DROM contains name of the vendor and device among other things. Extract this information and expose it to the userspace via two new attributes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>