summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2019-04-19sc16is7xx: put err_spi and err_i2c into correct #ifdefGuoqing Jiang
err_spi is only called within SERIAL_SC16IS7XX_SPI while err_i2c is called inside SERIAL_SC16IS7XX_I2C. So we need to put err_spi and err_i2c into each #ifdef accordingly. This change fixes ("sc16is7xx: move label 'err_spi' to correct section"). Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16sc16is7xx: move label 'err_spi' to correct sectionGuoqing Jiang
err_spi is used when SERIAL_SC16IS7XX_SPI is enabled, so make the label only available under SERIAL_SC16IS7XX_SPI option. Otherwise, the below warning appears. drivers/tty/serial/sc16is7xx.c:1523:1: warning: label ‘err_spi’ defined but not used [-Wunused-label] err_spi: ^~~~~~~ Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Fixes: ac0cdb3d9901 ("sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: sh-sci: Fix HSCIF RX sampling point adjustmentGeert Uytterhoeven
The calculation of the sampling point has min() and max() exchanged. Fix this by using the clamp() helper instead. Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-16serial: sh-sci: Fix HSCIF RX sampling point calculationGeert Uytterhoeven
There are several issues with the formula used for calculating the deviation from the intended rate: 1. While min_err and last_stop are signed, srr and baud are unsigned. Hence the signed values are promoted to unsigned, which will lead to a bogus value of deviation if min_err is negative, 2. Srr is the register field value, which is one less than the actual sampling rate factor, 3. The divisions do not use rounding. Fix this by casting unsigned variables to int, adding one to srr, and using a single DIV_ROUND_CLOSEST(). Fixes: 63ba1e00f178a448 ("serial: sh-sci: Support for HSCIF RX sampling point adjustment") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdbocWentao Wang
Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Signed-off-by: Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stoppedRazvan Stefanescu
In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28tty/serial: atmel: Add is_half_duplex helperRazvan Stefanescu
Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable <stable@vger.kernel.org> Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19serial: sh-sci: Fix setting SCSCR_TIE while transferring dataHoan Nguyen An
We disable transmission interrupt (clear SCSCR_TIE) after all data has been transmitted (if uart_circ_empty(xmit)). While transmitting, if the data is still in the tty buffer, re-enable the SCSCR_TIE bit, which was done at sci_start_tx(). This is unnecessary processing, wasting CPU operation if the data transmission length is large. And further, transmit end, FIFO empty bits disabling have also been performed in the step above. Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19serial: ar933x_uart: Fix build failure with disabled consolePetr Štetiar
Andrey has reported on OpenWrt's bug tracking system[1], that he currently can't use ar93xx_uart as pure serial UART without console (CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined), because compilation ends with following error: ar933x_uart.c: In function 'ar933x_uart_console_write': ar933x_uart.c:550:14: error: 'struct uart_port' has no member named 'sysrq' So this patch moves all the code related to console handling behind series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2152 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrey Batyiev <batyiev@gmail.com> Reported-by: Andrey Batyiev <batyiev@gmail.com> Tested-by: Andrey Batyiev <batyiev@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setupNathan Chancellor
When building with -Wsometimes-uninitialized, Clang warns: drivers/tty/serial/qcom_geni_serial.c:1079:6: warning: variable 'baud' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] It's not wrong; when options is NULL, baud has no default value. Use 9600 as that is a sane default. Link: https://github.com/ClangBuiltLinux/linux/issues/395 Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()Mao Wenan
Add the missing uart_unregister_driver() and i2c_del_driver() before return from sc16is7xx_init() in the error handling case. Signed-off-by: Mao Wenan <maowenan@huawei.com> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19tty: mxs-auart: fix a potential NULL pointer dereferenceKangjie Lu
In case ioremap fails, the fix returns -ENOMEM to avoid NULL pointer dereferences. Multiple places use port.membase. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19tty: atmel_serial: fix a potential NULL pointer dereferenceKangjie Lu
In case dmaengine_prep_dma_cyclic fails, the fix returns a proper error code to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Fixes: 34df42f59a60 ("serial: at91: add rx dma support") Acked-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19serial: max310x: Fix to avoid potential NULL pointer dereferenceAditya Pakki
of_match_device can return a NULL pointer when matching device is not found. This patch avoids a scenario causing NULL pointer derefernce. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19serial: mvebu-uart: Fix to avoid a potential NULL pointer dereferenceAditya Pakki
of_match_device on failure to find a matching device can return a NULL pointer. The patch checks for such a scenrio and passes the error upstream. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-14Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...
2019-03-09Merge tag 'pci-v5.1-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ...
2019-03-01tty: xilinx_uartps: Correct return value in probeRajan Vaja
Existing driver checks for alternate clock if devm_clk_get() fails and returns error code for last clock failure. If xilinx_uartps is called before clock driver, devm_clk_get() returns -EPROBE_DEFER. In this case, probe should not check for alternate clock as main clock is already present in DTS and return -EPROBE_DEFER only. This patch fixes it by not checking for alternate clock when main clock get returns -EPROBE_DEFER. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26serial: sprd: Modify the baud rate calculation formulaLanqing Liu
When the source clock is not divisible by the expected baud rate and the remainder is not less than half of the expected baud rate, the old formular will round up the frequency division coefficient. This will make the actual baud rate less than the expected value and can not meet the external transmission requirements. Thus this patch modifies the baud rate calculation formula to support the serial controller output the maximum baud rate. Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26serial: 8250_of: assume reg-shift of 2 for mrvl,mmp-uartLubomir Rintel
There are two other drivers that bind to mrvl,mmp-uart and both of them assume register shift of 2 bits. There are device trees that lack the property and rely on that assumption. If this driver wins the race to bind to those devices, it should behave the same as the older deprecated driver. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26serial: 8250_pxa: honor the port number from devicetreeLubomir Rintel
Like the other OF-enabled drivers, use the port number from the firmware if the devicetree specifies an alias: aliases { ... serial2 = &uart2; /* Should be ttyS2 */ } This is how the deprecated pxa.c driver behaved, switching to 8250_pxa messes up the numbering. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19tty: serial: msm_serial: Remove __init from msm_console_setup()Jeffrey Hugo
Due to the complexities of modern Qualcomm SoCs, about a half dozen drivers must successfully probe before the clocks for the console are present, and the console can successfully probe. Depending on several random factors such as probe order and modules vs builtin, msm_serial may not be able to successfully probe for some, at which point, __init annotated functions may become unmapped. If this occurs, msm_console_setup() will be called from the probe path, but will no longer exist, resulting in a kernel panic. Resolve this issue by removing the __init annotation from msm_console_setup(). Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19tty: serial: samsung: Enable baud clock during initialisationStuart Menefy
The Exynos 5260, like the 5433, appears to require baud clock as well as pclk to be running before accessing any of the registers, otherwise an external abort is raised. The serial driver already enables baud clock when required, but only if it knows which clock is baud clock. On older SoCs baud clock may be selected from a number of possible clocks so to support this the driver only selects which clock to use for baud clock when a port is opened, at which point the desired baud rate is known and the best clock can be selected. The result is that there are a number of circumstances in which registers are accessed without first explicitly enabling baud clock: - while the driver is being initialised - the initial parts of opening a port for the first time - when resuming if the port hasn't been already opened The 5433 overcomes this currently by marking the baud clock as CLK_IGNORE_UNUSED, so the clock is always enabled, however for the 5260 I've been trying to avoid this. This change adds code to pick the first available clock to use as baud clock and enables it while initialising the driver. This code wouldn't be sufficient on a SoC which supports multiple possible baud clock sources _and_ requires the correct baud clock to be enabled before accessing any of the serial port registers (in particular the register which selects which clock to use as the baud clock). As far as I know such hardware doesn't exist. Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFOAnssi Hannula
If RX is disabled while there are still unprocessed bytes in RX FIFO, cdns_uart_handle_rx() called from interrupt handler will get stuck in the receive loop as read bytes will not get removed from the RX FIFO and CDNS_UART_SR_RXEMPTY bit will never get set. Avoid the stuck handler by checking first if RX is disabled. port->lock protects against race with RX-disabling functions. This HW behavior was mentioned by Nathan Rossi in 43e98facc4a3 ("tty: xuartps: Fix RX hang, and TX corruption in termios call") which fixed a similar issue in cdns_uart_set_termios(). The behavior can also be easily verified by e.g. setting CDNS_UART_CR_RX_DIS at the beginning of cdns_uart_handle_rx() - the following loop will then get stuck. Resetting the FIFO using RXRST would not set RXEMPTY either so simply issuing a reset after RX-disable would not work. I observe this frequently on a ZynqMP board during heavy RX load at 1M baudrate when the reader process exits and thus RX gets disabled. Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART") Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-19tty: serial: remove redundant likely annotationChengguang Xu
unlikely has already included in IS_ERR(), so just remove redundant likely annotation. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 ↵Jay Dolan
chip use the pci_pericom_setup() The four port Pericom chips have the fourth port at the wrong address. Make use of quirk to fix it. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-13serial: 8250_pci: Fix number of ports for ACCES serial cardsJay Dolan
Have the correct number of ports created for ACCES serial cards. Two port cards show up as four ports, and four port cards show up as eight. Fixes: c8d192428f52 ("serial: 8250: added acces i/o products quad and octal serial cards") Signed-off-by: Jay Dolan <jay.dolan@accesio.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11serial: 8250_pci: Replace custom code with pci_match_id()Heikki Krogerus
serial_pci_is_blacklisted() is very similar to pci_match_id() implementation. Replace it with the latter. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11Merge 5.0-rc6 into tty-nextGreg Kroah-Hartman
We need the tty fixes in here for other patches to be based on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-08Merge tag 'tty-5.0-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty and serial fixes for 5.0-rc6. Nothing huge, just a few small fixes for reported issues. The speakup fix is in here as it is a tty operation issue. All of these have been in linux-next for a while with no reported problems" * tag 'tty-5.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: fix race between flush_to_ldisc and tty_open staging: speakup: fix tty-operation NULL derefs serial: sh-sci: Do not free irqs that have already been freed serial: 8250_pci: Make PCI class test non fatal tty: serial: 8250_mtk: Fix potential NULL pointer dereference
2019-02-08serial: max310x: Correction of the initial setting of the MODE1 bits for ↵Alexander Shiyan
various supported ICs. The MODE1 register bits have different values for different ICs. This patch corrects the initial setting of this register in accordance with the datasheets, which will allow you to get the expected values when debugging the driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-02Merge tag 'riscv-for-linus-5.0-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "This contains a handful of mostly-independent patches: - make our port respect TIF_NEED_RESCHED, which fixes CONFIG_PREEMPT=y kernels - fix double-put of OF nodes - fix a misspelling of target in our Kconfig - generic PCIe is enabled in our defconfig - fix our SBI early console to properly handle line endings - fix max_low_pfn being counted in PFNs - a change to TASK_UNMAPPED_BASE to match what other arches do This has passed my standard 'boot Fedora' flow" * tag 'riscv-for-linus-5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: riscv: Adjust mmap base address at a third of task size riscv: fixup max_low_pfn with PFN_DOWN. tty/serial: use uart_console_write in the RISC-V SBL early console RISC-V: defconfig: Add CRYPTO_DEV_VIRTIO=y RISC-V: defconfig: Enable Generic PCIE by default RISC-V: defconfig: Move CONFIG_PCI{,E_XILINX} RISC-V: Kconfig: fix spelling mistake "traget" -> "target" RISC-V: asm/page.h: fix spelling mistake "CONFIG_64BITS" -> "CONFIG_64BIT" RISC-V: fix bad use of of_node_put RISC-V: Add _TIF_NEED_RESCHED check for kernel thread when CONFIG_PREEMPT=y
2019-02-01PCI: Move Rohm Vendor ID to generic listAndy Shevchenko
Move the Rohm Vendor ID to pci_ids.h instead of defining it in several drivers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-31serial: fix race between flush_to_ldisc and tty_openGreg Kroah-Hartman
There still is a race window after the commit b027e2298bd588 ("tty: fix data race between tty_init_dev and flush of buf"), and we encountered this crash issue if receive_buf call comes before tty initialization completes in tty_open and tty->driver_data may be NULL. CPU0 CPU1 ---- ---- tty_open tty_init_dev tty_ldisc_unlock schedule flush_to_ldisc receive_buf tty_port_default_receive_buf tty_ldisc_receive_buf n_tty_receive_buf_common __receive_buf uart_flush_chars uart_start /*tty->driver_data is NULL*/ tty->ops->open /*init tty->driver_data*/ it can be fixed by extending ldisc semaphore lock in tty_init_dev to driver_data initialized completely after tty->ops->open(), but this will lead to get lock on one function and unlock in some other function, and hard to maintain, so fix this race only by checking tty->driver_data when receiving, and return if tty->driver_data is NULL, and n_tty_receive_buf_common maybe calls uart_unthrottle, so add the same check. Because the tty layer knows nothing about the driver associated with the device, the tty layer can not do anything here, it is up to the tty driver itself to check for this type of race. Fix up the serial driver to correctly check to see if it is finished binding with the device when being called, and if not, abort the tty calls. [Description and problem report and testing from Li RongQing, I rewrote the patch to be in the serial layer, not in the tty core - gregkh] Reported-by: Li RongQing <lirongqing@baidu.com> Tested-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Wang Li <wangli39@baidu.com> Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdownNathan Chancellor
Clang warns: drivers/tty/serial/mps2-uart.c:351:6: warning: logical not is only applied to the left hand side of this bitwise operator [-Wlogical-not-parentheses] if (!mps_port->flags & UART_PORT_COMBINED_IRQ) { ^ ~ drivers/tty/serial/mps2-uart.c:351:6: note: add parentheses after the '!' to evaluate the bitwise operator first if (!mps_port->flags & UART_PORT_COMBINED_IRQ) { ^ ( ) drivers/tty/serial/mps2-uart.c:351:6: note: add parentheses around left hand side expression to silence this warning if (!mps_port->flags & UART_PORT_COMBINED_IRQ) { ^ ( ) 1 warning generated. As it was intended for this check to be the inverse of the one at the bottom of mps2_init_port, add parentheses around the whole conditional. Fixes: 775ea4ea2fd9 ("serial: mps2-uart: support combined irq") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/344 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: mps2-uart: support combined irqVladimir Murzin
It turns out that some designs went for implementing only combined interrupt for rx, tx and overrun, which is currently not supported by the driver. Support of combined irq is built on top of existent irq handlers and activated automatically if only single irq was specified in device tree. Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: mps2-uart: move to dynamic port allocationVladimir Murzin
Some designs, like MPS3, expose number of virtual serial ports which already close or exceeds MPS2_MAX_PORTS. Increasing MPS2_MAX_PORTS would have negative impact (in terms of memory consumption) on tiny MPS2 platform which, in fact, has only one physically populated UART. Start with converting existent static port array to idr. As a bonus it make driver not to fail in case when no alias was specified in device tree. Note: there is no need in idr_destroy() because code doesn't unload since ce87122911f8 ("serial: mps2-uart: make driver explicitly non-modular") Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: sh-sci: Do not free irqs that have already been freedChris Brandt
Since IRQs might be muxed on some parts, we need to pay attention when we are freeing them. Otherwise we get the ugly WARNING "Trying to free already-free IRQ 20". Fixes: 628c534ae735 ("serial: sh-sci: Improve support for separate TEI and DRI interrupts") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: 8250_pci: Make PCI class test non fatalAndy Shevchenko
As has been reported the National Instruments serial cards have broken PCI class. The commit 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") made the PCI class check mandatory for the case when device is listed in a quirk list. Make PCI class test non fatal to allow broken card be enumerated. Fixes: 7d8905d06405 ("serial: 8250_pci: Enable device after we check black list") Cc: stable <stable@vger.kernel.org> Reported-by: Guan Yung Tseng <guan.yung.tseng@ni.com> Tested-by: Guan Yung Tseng <guan.yung.tseng@ni.com> Tested-by: KHUENY.Gerhard <Gerhard.KHUENY@bachmann.info> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30tty: serial: 8250_mtk: Fix potential NULL pointer dereferenceGustavo A. R. Silva
There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on data->dma This bug was detected with the help of Coccinelle. Fixes: 85b5c1dd0456 ("serial: 8250-mtk: add uart DMA support") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: Add Tegra Combined UART driverThierry Reding
The Tegra Combined UART (TCU) is a mailbox-based mechanism that allows multiplexing multiple "virtual UARTs" into a single hardware serial port. The TCU is the primary serial port on Tegra194 devices. Add a TCU driver utilizing the mailbox framework, as the used mailboxes are part of Tegra HSP blocks that are already controlled by the Tegra HSP mailbox driver. Based on work by Mikko Perttunen <mperttunen@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30Serial: Ingenic: Add support for the X1000.Zhou Yanjie
Add support for probing the 8250_ingenic driver on the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: 8250: Add OF support for Xscale variantLinus Walleij
This adds support for device tree probing for the Intel Xscale 8250 variant needed to support device tree on the Intel IXP4xx platforms. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-30serial: fsl_lpuart: DMA support for 32-bit variantAtsushi Nemoto
Add DMA support for 32-bit variant of the LPUART, such as LS1021A. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-28Merge 5.0-rc4 into tty-nextGreg Kroah-Hartman
We need the tty and serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-23tty/serial: use uart_console_write in the RISC-V SBL early consoleAndreas Schwab
This enables proper NLCR processing. Suggested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-01-22serial: fsl_lpuart: consider TX FIFO too in lpuart32_tx_emptyAtsushi Nemoto
The commit 3876a00fcb6b ("tty: serial: fsl_lpuart: consider TX FIFO too in tx_empty") fixed lpuart_tx_empty only. Fix lpuart32_tx_empty too. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22serial: fsl_lpuart: specify transmit FIFO size for 32-bit variantAtsushi Nemoto
The commit 4e8f24593709 ("tty: serial: fsl_lpuart: specify transmit FIFO size") fixed lpuart_startup only. Fix lpuart32_startup too. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22serial: fsl_lpuart: fix maximum acceptable baud rate with over-samplingTomonori Sakita
Using over-sampling ratio, lpuart can accept baud rate upto uartclk / 4. Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp> Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabledMatthias Kaehlcke
The geni set/get_mctrl() functions currently do nothing unless hardware flow control is enabled. Remove this arbitrary limitation. Suggested-by: Johan Hovold <johan@kernel.org> Fixes: 8a8a66a1a18a ("tty: serial: qcom_geni_serial: Add support for flow control") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-06-15 13:30:56 +0000