summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2020-08-26Merge tag 'tty-5.9-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are a few small TTY/Serial/vt fixes for 5.9-rc3 Included in here are: - qcom serial fixes - vt ioctl and core bugfixes - pl011 serial driver fixes - 8250 serial driver fixes - other misc serial driver fixes and for good measure: - fbcon fix for syzbot found problem. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: imx: add dependence and build for earlycon serial: samsung: Removes the IRQ not found warning serial: 8250: change lock order in serial8250_do_startup() serial: stm32: avoid kernel warning on absence of optional IRQ serial: pl011: Fix oops on -EPROBE_DEFER serial: pl011: Don't leak amba_ports entry on driver register error serial: 8250_exar: Fix number of ports for Commtech PCIe cards tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setup serial: qcom_geni_serial: Fix recent kdb hang vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize() fbcon: prevent user font height or width change from causing potential out-of-bounds access vt: defer kfree() of vc_screenbuf in vc_do_resize()
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-18tty: serial: imx: add dependence and build for earlyconFugang Duan
Add the earlycon dependence and add earlycon Makefile support to allow to build the driver. Fixes: 699cc4dfd140 ("tty: serial: imx: add imx earlycon driver") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20200810060652.3436-1-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: samsung: Removes the IRQ not found warningTamseel Shams
In few older Samsung SoCs like s3c2410, s3c2412 and s3c2440, UART IP is having 2 interrupt lines. However, in other SoCs like s3c6400, s5pv210, exynos5433, and exynos4210 UART is having only 1 interrupt line. Due to this, "platform_get_irq(platdev, 1)" call in the driver gives the following false-positive error: "IRQ index 1 not found" on newer SoC's. This patch adds the condition to check for Tx interrupt only for the those SoC's which have 2 interrupt lines. Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Tamseel Shams <m.shams@samsung.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200810030021.45348-1-m.shams@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: 8250: change lock order in serial8250_do_startup()Sergey Senozhatsky
We have a number of "uart.port->desc.lock vs desc.lock->uart.port" lockdep reports coming from 8250 driver; this causes a bit of trouble to people, so let's fix it. The problem is reverse lock order in two different call paths: chain #1: serial8250_do_startup() spin_lock_irqsave(&port->lock); disable_irq_nosync(port->irq); raw_spin_lock_irqsave(&desc->lock) chain #2: __report_bad_irq() raw_spin_lock_irqsave(&desc->lock) for_each_action_of_desc() printk() spin_lock_irqsave(&port->lock); Fix this by changing the order of locks in serial8250_do_startup(): do disable_irq_nosync() first, which grabs desc->lock, and grab uart->port after that, so that chain #1 and chain #2 have same lock order. Full lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.4.39 #55 Not tainted ====================================================== swapper/0/0 is trying to acquire lock: ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57 but task is already holding lock: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&irq_desc_lock_class){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d __irq_get_desc_lock+0x65/0x89 __disable_irq_nosync+0x3b/0x93 serial8250_do_startup+0x451/0x75c uart_startup+0x1b4/0x2ff uart_port_activate+0x73/0xa0 tty_port_open+0xae/0x10a uart_open+0x1b/0x26 tty_open+0x24d/0x3a0 chrdev_open+0xd5/0x1cc do_dentry_open+0x299/0x3c8 path_openat+0x434/0x1100 do_filp_open+0x9b/0x10a do_sys_open+0x15f/0x3d7 kernel_init_freeable+0x157/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d serial8250_console_write+0xa7/0x2a0 console_unlock+0x3b7/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 register_console+0x336/0x3a4 uart_add_one_port+0x51b/0x5be serial8250_register_8250_port+0x454/0x55e dw8250_probe+0x4dc/0x5b9 platform_drv_probe+0x67/0x8b really_probe+0x14a/0x422 driver_probe_device+0x66/0x130 device_driver_attach+0x42/0x5b __driver_attach+0xca/0x139 bus_for_each_dev+0x97/0xc9 bus_add_driver+0x12b/0x228 driver_register+0x64/0xed do_one_initcall+0x20c/0x4a6 do_initcall_level+0xb5/0xc5 do_basic_setup+0x4c/0x58 kernel_init_freeable+0x13f/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #0 (console_owner){-...}: __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 console_lock_spinning_enable+0x51/0x57 console_unlock+0x25d/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 ret_from_intr+0x0/0x1d cpuidle_enter_state+0x12f/0x1fd cpuidle_enter+0x2e/0x3d do_idle+0x1ce/0x2ce cpu_startup_entry+0x1d/0x1f start_kernel+0x406/0x46a secondary_startup_64+0xa4/0xb0 other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &irq_desc_lock_class Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&irq_desc_lock_class); lock(&port_lock_key); lock(&irq_desc_lock_class); lock(console_owner); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55 Hardware name: XXXXXX Call Trace: <IRQ> dump_stack+0xbf/0x133 ? print_circular_bug+0xd6/0xe9 check_noncircular+0x1b9/0x1c3 __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 ? console_lock_spinning_enable+0x31/0x57 console_lock_spinning_enable+0x51/0x57 ? console_lock_spinning_enable+0x31/0x57 console_unlock+0x25d/0x528 ? console_trylock+0x18/0x4e vprintk_emit+0x111/0x17f ? lock_acquire+0x203/0x258 printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 common_interrupt+0xf/0xf </IRQ> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Fixes: 768aec0b5bcc ("serial: 8250: fix shared interrupts issues with SMP and RT kernels") Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Raul Rangel <rrangel@google.com> BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800 Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@mail.gmail.com/T/#u Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200817022646.1484638-1-sergey.senozhatsky@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: stm32: avoid kernel warning on absence of optional IRQHolger Assmann
stm32_init_port() of the stm32-usart may trigger a warning in platform_get_irq() when the device tree specifies no wakeup interrupt. The wakeup interrupt is usually a board-specific GPIO and the driver functions correctly in its absence. The mainline stm32mp151.dtsi does not specify it, so all mainline device trees trigger an unnecessary kernel warning. Use of platform_get_irq_optional() avoids this. Fixes: 2c58e56096dd ("serial: stm32: fix the get_irq error case") Signed-off-by: Holger Assmann <h.assmann@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813152757.32751-1-h.assmann@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: pl011: Fix oops on -EPROBE_DEFERLukas Wunner
If probing of a pl011 gets deferred until after free_initmem(), an oops ensues because pl011_console_match() is called which has been freed. Fix by removing the __init attribute from the function and those it calls. Commit 10879ae5f12e ("serial: pl011: add console matching function") introduced pl011_console_match() not just for early consoles but regular preferred consoles, such as those added by acpi_parse_spcr(). Regular consoles may be registered after free_initmem() for various reasons, one being deferred probing, another being dynamic enablement of serial ports using a DeviceTree overlay. Thus, pl011_console_match() must not be declared __init and the functions it calls mustn't either. Stack trace for posterity: Unable to handle kernel paging request at virtual address 80c38b58 Internal error: Oops: 8000000d [#1] PREEMPT SMP ARM PC is at pl011_console_match+0x0/0xfc LR is at register_console+0x150/0x468 [<80187004>] (register_console) [<805a8184>] (uart_add_one_port) [<805b2b68>] (pl011_register_port) [<805b3ce4>] (pl011_probe) [<80569214>] (amba_probe) [<805ca088>] (really_probe) [<805ca2ec>] (driver_probe_device) [<805ca5b0>] (__device_attach_driver) [<805c8060>] (bus_for_each_drv) [<805c9dfc>] (__device_attach) [<805ca630>] (device_initial_probe) [<805c90a8>] (bus_probe_device) [<805c95a8>] (deferred_probe_work_func) Fixes: 10879ae5f12e ("serial: pl011: add console matching function") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.10+ Cc: Aleksey Makarov <amakarov@marvell.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Christopher Covington <cov@codeaurora.org> Link: https://lore.kernel.org/r/f827ff09da55b8c57d316a1b008a137677b58921.1597315557.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: pl011: Don't leak amba_ports entry on driver register errorLukas Wunner
pl011_probe() calls pl011_setup_port() to reserve an amba_ports[] entry, then calls pl011_register_port() to register the uart driver with the tty layer. If registration of the uart driver fails, the amba_ports[] entry is not released. If this happens 14 times (value of UART_NR macro), then all amba_ports[] entries will have been leaked and driver probing is no longer possible. (To be fair, that can only happen if the DeviceTree doesn't contain alias IDs since they cause the same entry to be used for a given port.) Fix it. Fixes: ef2889f7ffee ("serial: pl011: Move uart_register_driver call to device") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.15+ Cc: Tushar Behera <tushar.behera@linaro.org> Link: https://lore.kernel.org/r/138f8c15afb2f184d8102583f8301575566064a6.1597316167.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: 8250_exar: Fix number of ports for Commtech PCIe cardsValmer Huhn
The following in 8250_exar.c line 589 is used to determine the number of ports for each Exar board: nr_ports = board->num_ports ? board->num_ports : pcidev->device & 0x0f; If the number of ports a card has is not explicitly specified, it defaults to the rightmost 4 bits of the PCI device ID. This is prone to error since not all PCI device IDs contain a number which corresponds to the number of ports that card provides. This particular case involves COMMTECH_4222PCIE, COMMTECH_4224PCIE and COMMTECH_4228PCIE cards with device IDs 0x0022, 0x0020 and 0x0021. Currently the multiport cards receive 2, 0 and 1 port instead of 2, 4 and 8 ports respectively. To fix this, each Commtech Fastcom PCIe card is given a struct where the number of ports is explicitly specified. This ensures 'board->num_ports' is used instead of the default 'pcidev->device & 0x0f'. Fixes: d0aeaa83f0b0 ("serial: exar: split out the exar code from 8250_pci") Signed-off-by: Valmer Huhn <valmer.huhn@concurrent-rt.com> Tested-by: Valmer Huhn <valmer.huhn@concurrent-rt.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813165255.GC345440@icarus.concurrent-rt.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18tty: serial: qcom_geni_serial: Drop __init from qcom_geni_console_setupJohn Stultz
When booting with heavily modularized config, the serial console may not be able to load until after init when modules that satisfy needed dependencies have time to load. Unfortunately, as qcom_geni_console_setup is marked as __init, the function may have been freed before we get to run it, causing boot time crashes such as: [ 6.469057] Unable to handle kernel paging request at virtual address ffffffe645d4e6cc [ 6.481623] Mem abort info: [ 6.484466] ESR = 0x86000007 [ 6.487557] EC = 0x21: IABT (current EL), IL = 32 bits [ 6.492929] SET = 0, FnV = 0g [ 6.496016] EA = 0, S1PTW = 0 [ 6.499202] swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008151e000 [ 6.501286] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2 [ 6.505977] [ffffffe645d4e6cc] pgd=000000017df9f003, p4d=000000017df9f003, pud=000000017df9f003, pmd=000000017df9c003, pte=0000000000000000 [ 6.505990] Internal error: Oops: 86000007 [#1] PREEMPT SMP [ 6.505995] Modules linked in: zl10353 zl10039 zl10036 zd1301_demod xc5000 xc4000 ves1x93 ves1820 tuner_xc2028 tuner_simple tuner_types tua9001 tua6100 1 [ 6.506152] isl6405 [ 6.518104] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0 [ 6.530549] horus3a helene fc2580 fc0013 fc0012 fc0011 ec100 e4000 dvb_pll ds3000 drxk drxd drx39xyj dib9000 dib8000 dib7000p dib7000m dib3000mc dibx003 [ 6.624271] CPU: 7 PID: 148 Comm: kworker/7:2 Tainted: G W 5.8.0-mainline-12021-g6defd37ba1cd #3455 [ 6.624273] Hardware name: Thundercomm Dragonboard 845c (DT) [ 6.624290] Workqueue: events deferred_probe_work_func [ 6.624296] pstate: 40c00005 (nZcv daif +PAN +UAO BTYPE=--) [ 6.624307] pc : qcom_geni_console_setup+0x0/0x110 [ 6.624316] lr : try_enable_new_console+0xa0/0x140 [ 6.624318] sp : ffffffc010843a30 [ 6.624320] x29: ffffffc010843a30 x28: ffffffe645c3e7d0 [ 6.624325] x27: ffffff80f8022180 x26: ffffffc010843b28 [ 6.637937] x25: 0000000000000000 x24: ffffffe6462a2000 [ 6.637941] x23: ffffffe646398000 x22: 0000000000000000 [ 6.637945] x21: 0000000000000000 x20: ffffffe6462a5ce8 [ 6.637952] x19: ffffffe646398e38 x18: ffffffffffffffff [ 6.680296] x17: 0000000000000000 x16: ffffffe64492b900 [ 6.680300] x15: ffffffe6461e9d08 x14: 69202930203d2064 [ 6.680305] x13: 7561625f65736162 x12: 202c363331203d20 [ 6.696434] x11: 0000000000000030 x10: 0101010101010101 [ 6.696438] x9 : 4d4d20746120304d x8 : 7f7f7f7f7f7f7f7f [ 6.707249] x7 : feff4c524c787373 x6 : 0000000000008080 [ 6.707253] x5 : 0000000000000000 x4 : 8080000000000000 [ 6.707257] x3 : 0000000000000000 x2 : ffffffe645d4e6cc [ 6.744223] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34) [ 6.744966] x1 : fffffffefe74e174 x0 : ffffffe6462a5ce8 [ 6.753580] qcom_geni_serial 898000.serial: dev_pm_opp_set_rate: failed to find OPP for freq 102400000 (-34) [ 6.761634] Call trace: [ 6.761639] qcom_geni_console_setup+0x0/0x110 [ 6.761645] register_console+0x29c/0x2f8 [ 6.767981] Bluetooth: hci0: Frame reassembly failed (-84) [ 6.775252] uart_add_one_port+0x438/0x500 [ 6.775258] qcom_geni_serial_probe+0x2c4/0x4a8 [ 6.775266] platform_drv_probe+0x58/0xa8 [ 6.855359] really_probe+0xec/0x398 [ 6.855362] driver_probe_device+0x5c/0xb8 [ 6.855367] __device_attach_driver+0x98/0xb8 [ 7.184945] bus_for_each_drv+0x74/0xd8 [ 7.188825] __device_attach+0xec/0x148 [ 7.192705] device_initial_probe+0x24/0x30 [ 7.196937] bus_probe_device+0x9c/0xa8 [ 7.200816] deferred_probe_work_func+0x7c/0xb8 [ 7.205398] process_one_work+0x20c/0x4b0 [ 7.209456] worker_thread+0x48/0x460 [ 7.213157] kthread+0x14c/0x158 [ 7.216432] ret_from_fork+0x10/0x18 [ 7.220049] Code: bad PC value [ 7.223139] ---[ end trace 73f3b21e251d5a70 ]--- Thus this patch removes the __init avoiding crash in such configs. Cc: Andy Gross <agross@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: linux-arm-msm@vger.kernel.org Cc: linux-serial@vger.kernel.org Suggested-by: Saravana Kannan <saravanak@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200811025044.70626-1-john.stultz@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: qcom_geni_serial: Fix recent kdb hangDouglas Anderson
The commit e42d6c3ec0c7 ("serial: qcom_geni_serial: Make kgdb work even if UART isn't console") worked pretty well and I've been doing a lot of debugging with it. However, recently I typed "dmesg" in kdb and then held the space key down to scroll through the pagination. My device hung. This was repeatable and I found that it was introduced with the aforementioned commit. It turns out that there are some strange boundary cases in geni where in some weird situations it will signal RX_LAST but then will put 0 in RX_LAST_BYTE. This means that the entire last FIFO entry is valid. This weird corner case is handled in qcom_geni_serial_handle_rx() where you can see that we only honor RX_LAST_BYTE if RX_LAST is set _and_ RX_LAST_BYTE is non-zero. If either of these is not true we use BYTES_PER_FIFO_WORD (4) for the size of the last FIFO word. Let's fix kgdb. While at it, also use the proper #define for 4. Fixes: e42d6c3ec0c7 ("serial: qcom_geni_serial: Make kgdb work even if UART isn't console") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Akash Asthana <akashast@codeaurora.org> Link: https://lore.kernel.org/r/20200806221904.1.I4455ff86f0ef5281c2a0cd0a4712db614548a5ca@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize()George Kennedy
vc_resize() can return with an error after failure. Change VT_RESIZEX ioctl to save struct vc_data values that are modified and restore the original values in case of error. Signed-off-by: George Kennedy <george.kennedy@oracle.com> Cc: stable <stable@vger.kernel.org> Reported-by: syzbot+38a3699c7eaf165b97a6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/1596213192-6635-2-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18vt: defer kfree() of vc_screenbuf in vc_do_resize()Tetsuo Handa
syzbot is reporting UAF bug in set_origin() from vc_do_resize() [1], for vc_do_resize() calls kfree(vc->vc_screenbuf) before calling set_origin(). Unfortunately, in set_origin(), vc->vc_sw->con_set_origin() might access vc->vc_pos when scroll is involved in order to manipulate cursor, but vc->vc_pos refers already released vc->vc_screenbuf until vc->vc_pos gets updated based on the result of vc->vc_sw->con_set_origin(). Preserving old buffer and tolerating outdated vc members until set_origin() completes would be easier than preventing vc->vc_sw->con_set_origin() from accessing outdated vc members. [1] https://syzkaller.appspot.com/bug?id=6649da2081e2ebdc65c0642c214b27fe91099db3 Reported-by: syzbot <syzbot+9116ecc1978ca3a12f43@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1596034621-4714-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-06Merge tag 'tty-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the large set of TTY and Serial driver patches for 5.9-rc1. Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt and console code. Other highlights include: - much needed vt/vc code cleanup from Jiri Slaby - 8250 driver fixes and additions - various serial driver updates and feature enhancements - locking cleanup for serial/console initializations - other minor cleanups All of these have been in linux-next with no reported issues" * tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits) MAINTAINERS: enlist Greg formally for console stuff vgacon: Fix for missing check in scrollback handling Revert "serial: 8250: Let serial core initialise spin lock" serial: 8250: Let serial core initialise spin lock tty: keyboard, do not speculate on func_table index serial: stm32: Add RS485 RTS GPIO control serial: 8250_dw: Fix common clocks usage race condition serial: 8250_dw: Pass the same rate to the clk round and set rate methods serial: 8250_dw: Simplify the ref clock rate setting procedure serial: 8250: Add 8250 port clock update method tty: serial: imx: add imx earlycon driver tty: serial: imx: enable imx serial console port as module tty/synclink: remove leftover bits of non-PCI card support tty: Use the preferred form for passing the size of a structure type tty: Fix identation issues in struct serial_struct32 tty: Avoid the use of one-element arrays serial: msm_serial: add sparse context annotation serial: pmac_zilog: add sparse context annotation newport_con: vc_color is now in state serial: imx: use hrtimers for rs485 delays ...
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-04Merge tag 'printk-for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Herbert Xu made printk header file self-contained. - Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup() error handling. - Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf code. - Minor documentation updates. * tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: lib/vsprintf: Force type of flags value for gfp_t lib/vsprintf: Replace custom spec to print decimals with generic one lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert() printk: Make linux/printk.h self-contained doc:kmsg: explicitly state the return value in case of SEEK_CUR Replace HTTP links with HTTPS ones: vsprintf hvc: unify console setup naming console: Fix trivia typo 'change' -> 'chance' console: Propagate error code from console ->setup() tty: hvc: Return proper error code from console ->setup() hook serial: sunzilog: Return proper error code from console ->setup() hook serial: sunsab: Return proper error code from console ->setup() hook mips: Return proper error code from console ->setup() hook
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-04Merge tag 'tasklets-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull tasklets API update from Kees Cook: "These are the infrastructure updates needed to support converting the tasklet API to something more modern (and hopefully for removal further down the road). There is a 300-patch series waiting in the wings to get set out to subsystem maintainers, but these changes need to be present in the kernel first. Since this has some treewide changes, I carried this series for -next instead of paining Thomas with it in -tip, but it's got his Ack. This is similar to the timer_struct modernization from a while back, but not nearly as messy (I hope). :) - Prepare for tasklet API modernization (Romain Perier, Allen Pais, Kees Cook)" * tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: tasklet: Introduce new initialization API treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD() usb: gadget: udc: Avoid tasklet passing a global
2020-08-03Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-08-02Revert "serial: 8250: Let serial core initialise spin lock"Andy Shevchenko
This reverts commit 679193b7baf8d88e41cbeb397ca17f797654947d. It appears that in QEmu the lock has been initialised differently (it wasn't obvious on real hardware during testing). Let's revert the change until the better approach will be developed. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200802111612.36189-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31serial: 8250: Let serial core initialise spin lockAndy Shevchenko
Since the serial core handles spin lock initialisation, let the driver rely on it. Depends-on: f743061a85f5 ("serial: core: Initialise spin lock before use in uart_configure_port()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200731123733.22754-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31tty: keyboard, do not speculate on func_table indexJiri Slaby
It is very unlikely for processor to speculate on the func_table index. The index is uchar and func_table is of size 256. So the compiler would need to screw up and generate a really bad code. But to stay on the safe side, forbid speculation on this user passed index. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jiri Kosina <jikos@kernel.org> Link: https://lore.kernel.org/r/20200730105546.24268-1-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-30treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()Kees Cook
This converts all the existing DECLARE_TASKLET() (and ...DISABLED) macros with DECLARE_TASKLET_OLD() in preparation for refactoring the tasklet callback type. All existing DECLARE_TASKLET() users had a "0" data argument, it has been removed here as well. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-30serial: stm32: Add RS485 RTS GPIO controlMarek Vasut
While the STM32 does support RS485 drive-enable control within the UART IP itself, some systems have the drive-enable line connected to a pin which cannot be pinmuxed as RTS. Add support for toggling the RTS GPIO line using the modem control GPIOs to provide at least some sort of emulation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20200725144947.537007-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29serial: 8250_dw: Fix common clocks usage race conditionSerge Semin
The race condition may happen if the UART reference clock is shared with some other device (on Baikal-T1 SoC it's another DW UART port). In this case if that device changes the clock rate while serial console is using it the DW 8250 UART port might not only end up with an invalid uartclk value saved, but may also experience a distorted output data since baud-clock could have been changed. In order to fix this lets at least try to adjust the 8250 port setting like UART clock rate in case if the reference clock rate change is discovered. The driver will call the new method to update 8250 UART port clock rate settings. It's done by means of the clock event notifier registered at the port startup and unregistered in the shutdown callback method. Note 1. In order to avoid deadlocks we had to execute the UART port update method in a dedicated deferred work. This is due to (in my opinion redundant) the clock update implemented in the dw8250_set_termios() method. Note 2. Before the ref clock is manually changed by the custom set_termios() function we swap the port uartclk value with new rate adjusted to be suitable for the requested baud. It is necessary in order to effectively disable a functionality of the ref clock events handler for the current UART port, since uartclk update will be done a bit further in the generic serial8250_do_set_termios() function. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200723003357.26897-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29serial: 8250_dw: Pass the same rate to the clk round and set rate methodsSerge Semin
Indeed according to the clk API if clk_round_rate() has successfully accepted a rate, then in order setup the clock with value returned by the clk_round_rate() the clk_set_rate() method must be called with the original rate value. Suggested-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200723003357.26897-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29serial: 8250_dw: Simplify the ref clock rate setting procedureSerge Semin
Really instead of twice checking the clk_round_rate() return value we could do it once, and if it isn't error the clock rate can be changed. By doing so we decrease a number of ret-value tests and remove a weird goto-based construction implemented in the dw8250_set_termios() method. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200723003357.26897-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29serial: 8250: Add 8250 port clock update methodSerge Semin
Some platforms can be designed in a way so the UART port reference clock might be asynchronously changed at some point. In Baikal-T1 SoC this may happen due to the reference clock being shared between two UART ports, on the Allwinner SoC the reference clock is derived from the CPU clock, so any CPU frequency change should get to be known/reflected by/in the UART controller as well. But it's not enough to just update the uart_port->uartclk field of the corresponding UART port, the 8250 controller reference clock divisor should be altered so to preserve current baud rate setting. All of these things is done in a coherent way by calling the serial8250_update_uartclk() method provided in this patch. Though note that it isn't supposed to be called from within the UART port callbacks because the locks using to the protect the UART port data are already taken in there. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20200723003357.26897-2-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29tty: serial: imx: add imx earlycon driverFugang Duan
Split imx earlycon driver from imx serial driver "imx.c" as separated driver. imx serial driver can be built as module, but earlycon driver only support build in. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20200724070815.11445-3-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29tty: serial: imx: enable imx serial console port as moduleFugang Duan
Add support for building i.MX serial driver as module. The changes of the patch: - imx console driver can be built as module. - move out earlycon code to separated driver like imx_earlycon.c, and imx earlycon driver only support build-in. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20200724070815.11445-2-fugang.duan@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29tty/synclink: remove leftover bits of non-PCI card supportChristoph Hellwig
Since commit 1355cba9c3ba ("tty/synclink: remove ISA support"), the synlink driver only supports PCI card. Remove any leftover dead code to support other cards. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20200727130501.31005-1-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29tty: Use the preferred form for passing the size of a structure typeGustavo A. R. Silva
Use the preferred form for passing the size of a structure type. The alternative form where the structure type is spelled out hurts readability and introduces an opportunity for a bug when the object type is changed but the corresponding object identifier to which the sizeof operator is applied is not. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/b04dd8cdd67bd6ffde3fd12940aeef35fdb824a6.1595543280.git.gustavoars@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29tty: Fix identation issues in struct serial_struct32Gustavo A. R. Silva
Fix the following checkpatch.pl warnings together with all the identation issues in struct serial_struct32: ERROR: code indent should use tabs where possible + char reserved_char;$ WARNING: please, no spaces at the start of a line + char reserved_char;$ ERROR: code indent should use tabs where possible + compat_int_t reserved;$ WARNING: please, no spaces at the start of a line + compat_int_t reserved;$ Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/77576843397aeab0af8aa0423a9768f3ca8dedfb.1595543280.git.gustavoars@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29tty: Avoid the use of one-element arraysGustavo A. R. Silva
One-element arrays are being deprecated[1]. Replace the one-element arrays with simple value types 'char reserved_char' and 'compat_int_t reserved'[2], once it seems these are just placeholders for alignment. [1] https://github.com/KSPP/linux/issues/79 [2] https://github.com/KSPP/linux/issues/86 Tested-by: kernel test robot <lkp@intel.com> Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/tty-20200716.md Acked-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/f49bf0e27eaac396c96d21392c8c284f9f5ef52a.1595543280.git.gustavoars@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-27Merge 5.8-rc7 into tty-nextGreg Kroah-Hartman
we need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35XMatthew Howell
Sealevel XR17V35X based devices are inoperable on kernel versions 4.11 and above due to a change in the GPIO preconfiguration introduced in commit 7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel cards to the value (0x00) used prior to commit 7dea8165f1d With GPIOs preconfigured as per commit 7dea8165f1d all ports on Sealevel XR17V35X based devices become stuck in high impedance mode, regardless of dip-switch or software configuration. This causes the device to become effectively unusable. This patch (in various forms) has been distributed to our customers and no issues related to it have been reported. Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output") Signed-off-by: Matthew Howell <matthew.howell@sealevel.com> Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24serial: msm_serial: add sparse context annotationJohan Hovold
Add sparse context annotation to the receive handlers, which release and reacquire the port lock, to silence sparse warnings: drivers/tty/serial/msm_serial.c:748:25: warning: context imbalance in 'msm_handle_rx_dm' - unexpected unlock drivers/tty/serial/msm_serial.c:814:28: warning: context imbalance in 'msm_handle_rx' - unexpected unlock Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200723123327.5843-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24serial: pmac_zilog: add sparse context annotationJohan Hovold
Add sparse context annotation to the receive handler, which releases and reacquires the port lock, to silence a sparse warning: drivers/tty/serial/pmac_zilog.c:255:36: sparse: sparse: context imbalance in 'pmz_receive_chars' - unexpected unlock Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200723123327.5843-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: 8250_mtk: Fix high-speed baud rates clampingSerge Semin
Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port") fixed limits of a baud rate setting for a generic 8250 port. In other words since that commit the baud rate has been permitted to be within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely normal for a standard 8250 UART port. But there are custom 8250 ports, which provide extended baud rate limits. In particular the Mediatek 8250 port can work with baud rates up to "uartclk" speed. Normally that and any other peculiarity is supposed to be handled in a custom set_termios() callback implemented in the vendor-specific 8250-port glue-driver. Currently that is how it's done for the most of the vendor-specific 8250 ports, but for some reason for Mediatek a solution has been spread out to both the glue-driver and to the generic 8250-port code. Due to that a bug has been introduced, which permitted the extended baud rate limit for all even for standard 8250-ports. The bug has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port") by narrowing the baud rates limit back down to the normal bounds. Unfortunately by doing so we also broke the Mediatek-specific extended bauds feature. A fix of the problem described above is twofold. First since we can't get back the extended baud rate limits feature to the generic set_termios() function and that method supports only a standard baud rates range, the requested baud rate must be locally stored before calling it and then restored back to the new termios structure after the generic set_termios() finished its magic business. By doing so we still use the serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers, while the extended baud rate setting procedure will be performed later in the custom Mediatek-specific set_termios() callback. Second since a true baud rate is now fully calculated in the custom set_termios() method we need to locally update the port timeout by calling the uart_update_timeout() function. After the fixes described above are implemented in the 8250_mtk.c driver, the Mediatek 8250-port should get back to normally working with extended baud rates. Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com Fixes: 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port") Reported-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: stable <stable@vger.kernel.org> Tested-by: Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: 8250: fix null-ptr-deref in serial8250_start_tx()Yang Yingliang
I got null-ptr-deref in serial8250_start_tx(): [ 78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 78.123778] Mem abort info: [ 78.126560] ESR = 0x86000007 [ 78.129603] EC = 0x21: IABT (current EL), IL = 32 bits [ 78.134891] SET = 0, FnV = 0 [ 78.137933] EA = 0, S1PTW = 0 [ 78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600 [ 78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000 [ 78.160029] Internal error: Oops: 86000007 [#1] SMP [ 78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd [ 78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48 [ 78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020 [ 78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--) [ 78.228435] pc : 0x0 [ 78.230618] lr : serial8250_start_tx+0x160/0x260 [ 78.235215] sp : ffff800062eefb80 [ 78.238517] x29: ffff800062eefb80 x28: 0000000000000fff [ 78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000 [ 78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000 [ 78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002 [ 78.259679] x21: 0000000000000001 x20: 0000000000000000 [ 78.264969] x19: ffffa688827eecc8 x18: 0000000000000000 [ 78.270259] x17: 0000000000000000 x16: 0000000000000000 [ 78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6 [ 78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539 [ 78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0 [ 78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88 [ 78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000 [ 78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8 [ 78.307292] x3 : 0000000000000000 x2 : 0000000000000002 [ 78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8 [ 78.317873] Call trace: [ 78.320312] 0x0 [ 78.322147] __uart_start.isra.9+0x64/0x78 [ 78.326229] uart_start+0xb8/0x1c8 [ 78.329620] uart_flush_chars+0x24/0x30 [ 78.333442] n_tty_receive_buf_common+0x7b0/0xc30 [ 78.338128] n_tty_receive_buf+0x44/0x2c8 [ 78.342122] tty_ioctl+0x348/0x11f8 [ 78.345599] ksys_ioctl+0xd8/0xf8 [ 78.348903] __arm64_sys_ioctl+0x2c/0xc8 [ 78.352812] el0_svc_common.constprop.2+0x88/0x1b0 [ 78.357583] do_el0_svc+0x44/0xd0 [ 78.360887] el0_sync_handler+0x14c/0x1d0 [ 78.364880] el0_sync+0x140/0x180 [ 78.368185] Code: bad PC value SERIAL_PORT_DFNS is not defined on each arch, if it's not defined, serial8250_set_defaults() won't be called in serial8250_isa_init_ports(), so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref. Fix this problem by calling serial8250_set_defaults() after init uart port. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: imx: use hrtimers for rs485 delaysAhmad Fatoum
This patch imitates 6e0a5de213 ("serial: 8250: Use hrtimers for rs485 delays") in replacing the previously used classic timers with hrtimers. The old way provided a too coarse resolution on systems with configs of less than 1000 HZ. Use of hrtimers addresses this and can be easily extended to support microsecond resolution in future when support for this arrives upstream. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20200714093012.21621-3-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: imx: implement rts delaying for rs485Uwe Kleine-König
This adds support for delays between assertion of RTS (which is supposed to enable the rs485 transmitter) and sending as well as between the last send char and deassertionof RTS. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20200714093012.21621-2-uwe@kleine-koenig.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: tegra: drop bogus NULL tty-port checksJohan Hovold
The struct tty_port is part of the uart state and will never be NULL in the receive helpers. Drop the bogus NULL checks and rename the pointer-variables "port" to differentiate them from struct tty_struct pointers (which can be NULL). Fixes: 962963e4ee23 ("serial: tegra: Switch to using struct tty_port") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200710135947.2737-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: tegra: fix CREAD handling for PIOJohan Hovold
Commit 33ae787b74fc ("serial: tegra: add support to ignore read") added support for dropping input in case CREAD isn't set, but for PIO the ignore_status_mask wasn't checked until after the character had been put in the receive buffer. Note that the NULL tty-port test is bogus and will be removed by a follow-on patch. Fixes: 33ae787b74fc ("serial: tegra: add support to ignore read") Cc: stable <stable@vger.kernel.org> # 5.4 Cc: Shardar Shariff Md <smohammed@nvidia.com> Cc: Krishna Yarlagadda <kyarlagadda@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200710135947.2737-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: pch_uart: use generic power managementVaibhav Gupta
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state(), pci_enable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200720120414.399961-1-vaibhavgupta40@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: altera_jtaguart: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20200718103018.3164-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21serial: core: Fix Coding StyleTamseel Shams
This patch fixes the following checkpatch error and warning: 1. space required after ',' 2. Missing a blank line after declarations Signed-off-by: Tamseel Shams <m.shams@samsung.com> Link: https://lore.kernel.org/r/20200716115438.9967-1-m.shams@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21tty: serial: uartlite: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200718100807.983-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-21tty: serial: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200718123840.19957-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>