summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2015-09-08mm, oom: pass an oom order of -1 when triggered by sysrqDavid Rientjes
The force_kill member of struct oom_control isn't needed if an order of -1 is used instead. This is the same as order == -1 in struct compact_control which requires full memory compaction. This patch introduces no functional change. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08mm, oom: organize oom context into structDavid Rientjes
There are essential elements to an oom context that are passed around to multiple functions. Organize these elements into a new struct, struct oom_control, that specifies the context for an oom condition. This patch introduces no functional change. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...
2015-09-03Merge tag 'powerpc-4.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt - EEH fixes for SRIOV from Gavin - introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth - use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras - seccomp filter support from Michael Ellerman - opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar - add powerpc timebase as a trace clock source from Naveen N. Rao - misc cleanups in the xmon, signal & SLB code from Anshuman Khandual - add an inline function to update POWER8 HID0 from Gautham R. Shenoy - fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman - drop support for 64K local store on 4K kernels from Michael Ellerman - move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan - initialize distance lookup table from drconf path from Nikunj A Dadhania - enable RTC class support from Vaibhav Jain - disable automatically blocked PCI config from Gavin Shan - add LEDs driver for PowerNV platform from Vasant Hegde - fix endianness issues in the HVSI driver from Laurent Dufour - kexec endian fixes from Samuel Mendoza-Jonas - fix corrupted pdn list from Gavin Shan - fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan - Freescale updates from Scott: Highlights include 32-bit memcpy/memset optimizations, checksum optimizations, 85xx config fragments and updates, device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor fixes. - a ton of cxl updates & fixes: - add explicit precision specifiers from Rasmus Villemoes - use more common format specifier from Rasmus Villemoes - destroy cxl_adapter_idr on module_exit from Johannes Thumshirn - destroy afu->contexts_idr on release of an afu from Johannes Thumshirn - compile with -Werror from Daniel Axtens - EEH support from Daniel Axtens - plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain - add alternate MMIO error handling from Ian Munsie - allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan - remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar - release irqs if memory allocation fails from Vaibhav Jain - remove racy attempt to force EEH invocation in reset from Daniel Axtens - fix + cleanup error paths in cxl_dev_context_init from Ian Munsie - fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie - set up and enable PSL Timebase from Philippe Bergheaud * tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits) cxl: Set up and enable PSL Timebase cxl: Fix force unmapping mmaps of contexts allocated through the kernel api cxl: Fix + cleanup error paths in cxl_dev_context_init powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail() powerpc/pseries: Cleanup on pci_dn_reconfig_notifier() powerpc/pseries: Fix corrupted pdn list powerpc/powernv: Enable LEDS support powerpc/iommu: Set default DMA offset in dma_dev_setup cxl: Remove racy attempt to force EEH invocation in reset cxl: Release irqs if memory allocation fails cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver powerpc/powernv: Reset HILE before kexec_sequence() powerpc/kexec: Reset secondary cpu endianness before kexec powerpc/hvsi: Fix endianness issues in the HVSI driver leds/powernv: Add driver for PowerNV platform powerpc/powernv: Create LED platform device powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states powerpc/powernv: Fix the log message when disabling VF cxl: Allow release of contexts which have been OPENED but not STARTED ...
2015-09-03MIPS: Remove "weak" from get_c0_fdc_int() declarationBjorn Helgaas
Weak header file declarations are error-prone because they make every definition weak, and the linker chooses one based on link order (see 10629d711ed7 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). The most elegant solution is to have a weak default implementation and allow a strong function to override it. Then we don't have to test whether a definition is present, and if there are ever multiple strong definitions, we get a link error instead of calling a random definition. Add a weak get_c0_fdc_int() definition with the default code and remove the weak annotation from the declaration. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10687/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-20powerpc/hvsi: Fix endianness issues in the HVSI driverLaurent Dufour
This patch fixes several endianness issues detected when running the HVSI driver in little endian mode. These issues are raised in little endian mode because the data exchanged in memory between the kernel and the hypervisor has to be in big endian format. This exhibits as errors such as: irq: (null) didn't like hwirq-0x1000a00 to VIRQ16 mapping (rc=-22) hvsi_console_init: couldn't create irq mapping for 0x1000a00 The data structures already have endian annotations, and sparse is generating numerous warnings based on those. This commit fixes all of them. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Jiri Slaby <jslaby@suse.cz> CC: linuxppc-dev@lists.ozlabs.org CC: linux-kernel@vger.kernel.org [mpe: Flesh out change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-14serial: imx: save and restore context in the suspend pathEduardo Valentin
This change teaches the imx serial driver to save its context and restore it across suspend and resume path. To do so, it introduces serial_imx_restore_context() and serial_imx_save_context() functions. They use a shadow set of registers to save key registers and restore them accordingly. These functions can be reused on other situations, when the device context is lost. Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: imx: allow waking up on RTSDEduardo Valentin
This patch sets RTSDEN bit when going into idle (Stop mode). We add the RTSDEN for the case RTS is sent from the remote connection. This way we allow the system to wakeup when RTS is received. Cc: Fabio Stevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: imx: introduce serial_imx_enable_wakeup()Eduardo Valentin
This change is a code reorganization. Here we introduce serial_imx_enable_wakeup() helper function to do the job of configuring and preparing wakeup sources on imx serial device. The idea is to allow other parts of the code to call this function whenever the device is known to go to idle. Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: imx: remove unbalanced clk_prepareEduardo Valentin
The current code attempts to prepare clk_per and clk_ipg before using the device. However, the result is an extra prepare call on each clock. Here is the output of uart clocks (only uart enabled and used as console): $ grep uart /sys/kernel/debug/clk/clk_summary uart_serial 1 2 80000000 0 0 uart 1 2 66000000 0 0 This patch balances the calls of prepares. The result is: $ grep uart /sys/kernel/debug/clk/clk_summary uart_serial 1 1 80000000 0 0 uart 1 1 66000000 0 0 Cc: Fabio Estevam <festevam@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: 8250: move rx_running out of the bitfieldJohn Ogness
That bitfield is modified by read + or + write operation. If someone sets any of the other two bits it might render the lock useless. While at it, remove other bitfields as well to avoid more such errors. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14tty: serial: 8250_omap: do not use RX DMA if pause is not supportedSebastian Andrzej Siewior
The 8250-omap driver requires the DMA-engine driver to support the pause command in order to properly turn off programmed RX transfer before the driver stars manually reading from the FIFO. The lacking support of the requirement has been discovered recently. In order to stay safe here we disable RX-DMA completly on probe. The rx_dma_broken assignment on probe could be removed once we working pause function in omap-dma. Cc: <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial:8250_dw: do not alter CTS and DCTS since AFE is enabledQipeng Zha
Since the serial core is informed that this device is doing automatic flow control, it is not necessary to alter CTS and DCTS of the MSR as the core no longer attempts stop the port in uart_handle_cts_change(). Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14tty: serial: men_z135_uart.c: Don't initialize port->lockJohannes Thumshirn
port->lock get's initialized in uart_add_one_port(), no need to do it in men_z135_probe(). Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14tty: serial: men_z135_uart.c: Fix race between IRQ and set_termios()Johannes Thumshirn
Fix panic caused by a race between men_z135_intr() and men_z135_set_termios(). men_z135_intr() and men_z135_set_termios() both hold the struct uart_port::lock spinlock, but men_z135_intr() does a spin_lock_irqsave() and men_z135_set_termios() does a normal spin_lock(), which can lead to a deadlock when an interrupt is called while the lock is being helt by men_z135_set_termios(). This was discovered using a insmod, hardware looppback send/receive, rmmod stress test. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: Andreas Werner <andreas.werner@men.de> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: 8250: bind to ALi Fast Infrared Controller (ALI5123)Maciej S. Szmigiero
This way this device can be used with irtty-sir - at least on Toshiba Satellite A20-S103 it is not configured by default and needs PNP activation before it starts to respond on I/O ports. This device has actually its own driver (ali-ircc), but this driver seems to be non-functional for a very long time (see http://permalink.gmane.org/gmane.linux.irda.general/484 http://permalink.gmane.org/gmane.network.protocols.obex.openobex.user/943 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=535070 ). Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: 8250: don't bind to SMSC IrCC IR portMaciej S. Szmigiero
SMSC IrCC SIR/FIR port should not be bound to by (legacy) serial driver so its own driver (smsc-ircc2) can bind to it. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: mxs-auart: fix baud rate rangeStefan Wahren
Currently mxs-auart doesn't care correctly about the baud rate divisor. According to reference manual the baud rate divisor must be between 0x000000EC and 0x003FFFC0. So calculate the possible baud rate range and use it for uart_get_baud_rate(). Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: mxs-auart: keep the AUART unit in reset state when not in useJuergen Borleis
Whenever the UART device driver gets closed from userland, the driver disables the UART unit and then stops the clocks to save power. The bit which disabled the UART unit is described as:  "UART Enable. If this bit is set to 1, the UART is enabled. Data transmission and reception occurs for the UART signals. When the UART is disabled in the middle of transmission or reception, it completes the current character before stopping." The important part is the "it completes the current character". Whenever a reception is ongoing when the UART gets disabled (including the clock off) the statemachine freezes and "remembers" this state on the next open() when re-enabling the unit's clock. In this case we end up receiving an additional bogus character immediately. The solution in this change is to switch the AUART unit into its reset state on close() and only release it from its reset state on the next open(). Note: when the unit is also used as system console it is always 'in use', so we cannot reset it on close(). Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14serial: mxs-auart: use a function name to reflect what it really doesJuergen Borleis
This function clears the reset the AUART unit is in after system start to make it work. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05serial: 8250_pci: fix mode after S3/S4 resume for F81504/508/512Peter Hung
Fix RS232/485 mode incorrect setting after S3/S4 resume for F81504/508/512 We had add RS232/485 RTS control with fecf27a373f5. But when it resume from S3/S4, the mode register 0x40 + 0x08 * idx + 7 will rewrite to 0x01 (RS232 mode). This patch will modify 2 sections. One is pci_fintek_init(), if it called when first init, it will write mode register with 0x01. If it called from S3/S4 resume, it's will get the relative port data and pass it to pci_fintek_rs485_config() with NULL rs485 parameter. The another modification is in pci_fintek_rs485_config(). It'll re-apply old configuration when the parameter rs485 is NULL. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04sc16is7xx: constify devtypeJakub Kicinski
devtype structures are all declared as const. Compiler does not complain because we cast their pointers to save them in .driver_data. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04sc16is7xx: support multiple devicesJakub Kicinski
We currently register the uart driver during device probe which makes it hard to support more than one chip. Move the driver registration to module init/exit time and preallocate space for up to 8 lines (4-8 chips). Reported-by: Michael Allwright <michael.allwright@upb.de> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04sc16is7xx: save and use per-chip line numberJakub Kicinski
In preparation of supporting multiple devices we should save the per-chip line number (0 or 1), because the uart_port line will reflect system-wide uart number and will be offseted for chips other than the first to register. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04uart: pl011: Add support to ZTE ZX296702 uartJun Nie
Support ZTE uart with some registers differing offset. Probe as platform device for not AMBA IP ID is available on ZTE uart. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04uart: pl011: Improve LCRH register access decisionJun Nie
Improve LCRH register access decision as ARM PL011 lcrh register serve as both TX and RX, while other SOC may implement TX and RX function with separated register. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04uart: pl011: Introduce register look up tableJun Nie
Introduce register look up table as different SOC venders may have different register offset for the some register. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04uart: pl011: Introduce register accessorJun Nie
Introduce register accessor to ease loop up table access in later patch. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04uart: pl011: Rename regs with enumerationJun Nie
Rename regs with enumeration to generalize register names. Signed-off-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: 8250_pci: Add support for Pericom PI7C9X795[1248]Adam Lee
Pericom PI7C9X795[1248] are Uno/Dual/Quad/Octal UART devices, this patch enables them, also defines PCI_VENDOR_ID_PERICOM here. Signed-off-by: Adam Lee <adam.lee@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: samsung: fix DMA for FIFO smaller than cache line sizeRobert Baldyga
So far DMA mode were activated when only number of bytes to send was equal or greater than min_dma_size. Due to requirement that DMA transaction buffer should be aligned to cache line size, the excessive bytes were written to FIFO before starting DMA transaction. The problem occurred when FIFO size were smaller than cache alignment, because writing all excessive bytes to FIFO would fail. It happened in DMA mode when PIO interrupts disabled, which caused driver hung. The solution is to test if buffer is alligned to cache line size before activating DMA mode, and if it's not, running PIO mode to align buffer and then starting DMA transaction. In PIO mode, when interrupts are enabled, lack of space in FIFO isn't the problem, so buffer aligning will always finish with success. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: samsung: fix DMA mode enter condition for small FIFO sizesMarek Szyprowski
Due to some of serial ports can have FIFO size smaller than cache line size, and because of need to align DMA buffer address to cache line size, it's necessary to calculate minimum number of bytes for which we want to start DMA transaction to be at least cache line size. The simplest way to meet this requirement is to get maximum of cache line size and FIFO size. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: core: Remove tty port activate() and shutdown() methodsPeter Hurley
serial core does not use tty_port_open() or tty_port_close(); serial core defines and extends it's own tty open() and close() methods (uart_open() and uart_close(), respectively). Remove the tty_port activate() and shutdown() initializations, and the uart_port_activate() function, which is never called. NB: uart_port_shutdown() is used by uart_close() => uart_shutdown() call chain (but not via the tty_port methods). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: core: Use proper spinlock flavor in uart_close()Peter Hurley
uart_close() runs in non-atomic context only; use spin_lock/unlock_irq instead of saving the interrupt state (which == on). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04tty/serial: at91: fix I/O accesses on RHR and THR for AVR32Cyrille Pitchen
This patch fixes I/O accesses on the Receiver Holding Register and on the Transmitter Holding Register. Indeed AVR32 can only perform 32bit I/O accesses on registers: using 8bit I/O accesses would read or write garbage data. Fixes: commit b5199d468177 ("tty/serial: at91: add support to FIFOs") Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: 8250: Auto CTS control by HW if AFE enabledQipeng Zha
According to DesignWare 8250 spec, if auto flow control mode is enabled, a change in CTS does not cause an interrupt, so sw-assisted CTS flow control mode will not work properly. There reported an GPS firmware download failure issue, and we verified the root cause is, the default sw-assisted CTS flow control mode can not work properly since no interrupt when got CTS signal. This patch is to enable auto CTS mode by defaut if CRTSCTS is enable for DesignWare 8250 controller. Signed-off-by: Huiquan Zhong <huiquan.zhong@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: mpc52xx: let tx_empty callback return either 0 or TIOCSER_TEMTUwe Kleine-König
Documenation/serial/driver requests that the tx_empty callback should return 0 if there are still chars in the fifo or shifter or TIOCSER_TEMT (0x01) if no character is pending to be sent. Fix the mpc52xx serial driver to not return MPC52xx_PSC_SR_TXEMP (i.e. 0x0800) but TIOCSER_TEMT as documented. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signalsNiklas Cassel
In order to use the mctrl_gpio helpers, we change the DT bindings: ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios. However, no in-tree dts/dtsi specifies these, so no worries. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04serial: etraxfs-uart: remove empty functionsNiklas Cassel
Implementing enable_ms is optional by serial_core. check_modem_status is just an empty local function. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03Serial: imx: add dev_pm_ops to support suspend to ram/diskShenwei Wang
When system goes into low power states like SUSPEND_MEM and HIBERNATION, the hardware IP block may be powered off to reduce the power consumption. This power down may cause problems on some imx platforms, because the hardware settings are reset to its power on default values which may differ from the ones when it power off. This patch added the dev_pm_ops and implemented two callbacks: suspend_noirq and resume_noirq, which will save the necessory hardware parameters right before power down and recover them before system uses the hardware. Because added the dev_pm_ops, the old suspend/resume callbacks under platform_driver will not be called any more. Changed their prototypes and moved those two callbacks into dev_pm_ops too. Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03serial: 8250_uniphier: call clk_disable_unprepare() on failure pathMasahiro Yamada
If serial8250_register_8250_port() fails, disable and unprepare the clock before exiting. Fixes: 1a8d2903cb6a ("serial: 8250_uniphier: add UniPhier serial driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03serial: 8250_pci: add RS485 for F81504/508/512Peter Hung
Add RS485 control for Fintek F81504/508/512 F81504/508/512 can control their RTS with H/W mode. PCI configuration space for each port is 0x40 + idx * 8 + 7. When it set with 0x01, it's configured with RS232 mode. RTS is controlled by MCR. When it set with 0x11, it's configured with RS485 mode. RTS is controlled by H/W, RTS low with idle & RX, high with TX. When it set with 0x31, it's configured with RS485 mode. RTS is controlled by H/W, RTS high with idle & RX, low with TX. We will force 0x01 on pci_fintek_setup(). Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03Avoid usb reset crashes by making tty_io cdevs truly dynamicRichard Watts
Avoid usb reset crashes by making tty_io cdevs truly dynamic Signed-off-by: Richard Watts <rrw@kynesim.co.uk> Reported-by: Duncan Mackintosh <DMackintosh@cbnl.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27Revert "tty: serial: imx.c: Reset UART before activating interrupts"Fabio Estevam
This reverts commit e95044ba4fee93f5ea8a1a24b2d921e148503833. Commit e95044ba4fee93 ("tty: serial: imx.c: Reset UART before activating interrupts") terribly messes up with the console on mx6 boards, so let's revert it. Reported-by: kernelci.org bot <bot@kernelci.org> Cc: David Jander <david@protonic.nl> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-27Merge 4.2-rc4 into tty-nextGreg Kroah-Hartman
Other serial driver work wants to build on patches now in 4.2-rc4 so merge the branch so this can properly happen. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23pty: Add debug message for ptmx openPeter Hurley
Opens of /dev/ptmx don't use tty_open() so debug messages are not printed for those opens; print a debug message with the open count (which must always be 1) if TTY_DEBUG_HANGUP is defined. NB: Each tty core source file undefs support for debug messages. The relevant source file must be patched/edited to enable these messages. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty: core: Improve ldisc debug messagesPeter Hurley
Add debug messages for ldisc open and close, and remove "closing ldisc" message from tty_ldisc_release(), because a close message is now printed for both ldiscs; always print ldisc pointer first so ldisc changes are easier to identify. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty: Replace inline #ifdef TTY_DEBUG_WAIT_UNTIL_SENTPeter Hurley
Add tty_debug_wait_until_sent() macro which uses tty_debug() to print the debug message; remove inlined #ifdef. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty: Use tty_debug() for tty_ldisc_debug()Peter Hurley
Replace tty_ldisc_debug() macro definition; substitute with equivalent tty_debug() invocation. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-04-04 16:24:37 +0000