summaryrefslogtreecommitdiff
path: root/drivers/usb/chipidea
AgeCommit message (Collapse)Author
2017-08-28usb: chipidea: usb2: check memory allocation failureChristophe JAILLET
Check memory allocation failure and return -ENOMEM in such a case, as already done few lines below for another memory allocation. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28Merge tag 'usb-ci-v4.14-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Chipidea changes for v4.14-rc1 - Add chipidea support at Nvidia SoCs - Improvement for extcon support - Some code refines
2017-08-24usb: chipidea: Add support for Tegra20/30/114/124Thierry Reding
All of these Tegra SoC generations have a ChipIdea UDC IP block that can be used for device mode communication with a host. Implement rudimentary support that doesn't allow switching between host and device modes. Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Thierry Reding <treding@nvidia.com> [digetx@gmail.com: rebased patches and added DMA alignment quirk for Tegra20] Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-08-24usb: chipidea: udc: Support SKB alignment quirkDmitry Osipenko
NVIDIA Tegra20 UDC can't cope with unaligned DMA and require a USB gadget quirk that avoids SKB buffer alignment to be set in order to make Ethernet Gadget working. Later Tegra generations do not require that quirk. Let's add a new platform data flag that allows to enable USB gadget quirk for platforms that require it. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-08-10usb: chipidea: constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10usb: chipidea: otg_fsm: constify attribute_group structures.Arvind Yadav
attribute_group are not supposed to change at runtime. All functions working with attribute_group provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-25usb: chipidea: core: do not register extcon notifier if extcon device is not ↵Peter Chen
existed This issue is detected when the system has another device driver which registers USB connector extcon device, fix it by adding extcon device check. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-07-22USB: chipidea: remove unneeded MODULE_VERSION() usageGreg Kroah-Hartman
MODULE_VERSION is useless for in-kernel drivers, so remove the use of it in the chipidea CI13XXX driver. Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-19usb: chipidea: msm: ci_hdrc_msm_probe() missing of_node_get()Frank Rowand
Boot fails for qcom-apq8074-dragonboard on 4.13-rc1 with error: OF: ERROR: Bad of_node_put() on /soc/usb@f9a55000 The error will occur if the configuration is set to: CONFIG_OF_OVERLAY y CONFIG_OF_UNITTEST y CONFIG_OF_DYNAMIC y CONFIG_OF_RESOLVE y If CONFIG_OF_DYNAMIC is enabled then of_node_release() detects an attempt to release a node that is still attached to the device tree. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-07-19usb: chipidea: udc: compress return logic into lineGustavo A. R. Silva
Simplify return logic to avoid unnecessary variable assignment. This issue was detected using Coccinelle and the following semantic patch: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-06-27Merge tag 'usb-ci-v4.13-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: One patch to improve error handling at chipidea core
2017-06-12Merge 4.12-rc5 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03usb: Make use of ktime_* comparison functionsMariusz Skamra
Start using ktime_* compare functions to make the code backportable. Now that may be a bit tricky due to recent change of ktime_t. Signed-off-by: Mariusz Skamra <mariuszx.skamra@intel.com> Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-23usb: chipidea: core: check before accessing ci_role in ci_role_showMichael Thalmeier
ci_role BUGs when the role is >= CI_ROLE_END. This is the case while the role is changing. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-05-23usb: chipidea: debug: check before accessing ci_roleMichael Thalmeier
ci_role BUGs when the role is >= CI_ROLE_END. Cc: stable@vger.kernel.org #v3.10+ Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-05-18usb: chipidea: udc: fix NULL pointer dereference if udc_start failedJisheng Zhang
Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET] too early in ci_hdrc_gadget_init(), if udc_start() fails due to some reason, the ci->roles[CI_ROLE_GADGET] check in ci_hdrc_gadget_destroy can't protect us. We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if udc_start() succeed. [ 1.398550] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 1.448600] PC is at dma_pool_free+0xb8/0xf0 [ 1.453012] LR is at dma_pool_free+0x28/0xf0 [ 2.113369] [<ffffff80081817d8>] dma_pool_free+0xb8/0xf0 [ 2.118857] [<ffffff800841209c>] destroy_eps+0x4c/0x68 [ 2.124165] [<ffffff8008413770>] ci_hdrc_gadget_destroy+0x28/0x50 [ 2.130461] [<ffffff800840fa30>] ci_hdrc_probe+0x588/0x7e8 [ 2.136129] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.142066] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.148270] [<ffffff800837f68c>] __device_attach_driver+0x9c/0xf8 [ 2.154563] [<ffffff800837d570>] bus_for_each_drv+0x58/0x98 [ 2.160317] [<ffffff800837f174>] __device_attach+0xc4/0x138 [ 2.166072] [<ffffff800837f738>] device_initial_probe+0x10/0x18 [ 2.172185] [<ffffff800837e58c>] bus_probe_device+0x94/0xa0 [ 2.177940] [<ffffff800837c560>] device_add+0x3f0/0x560 [ 2.183337] [<ffffff8008380d20>] platform_device_add+0x180/0x240 [ 2.189541] [<ffffff800840f0e8>] ci_hdrc_add_device+0x440/0x4f8 [ 2.195654] [<ffffff8008414194>] ci_hdrc_usb2_probe+0x13c/0x2d8 [ 2.201769] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8 [ 2.207705] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8 [ 2.213910] [<ffffff800837f5ec>] __driver_attach+0xac/0xb0 [ 2.219575] [<ffffff800837d4b0>] bus_for_each_dev+0x60/0xa0 [ 2.225329] [<ffffff800837ec80>] driver_attach+0x20/0x28 [ 2.230816] [<ffffff800837e880>] bus_add_driver+0x1d0/0x238 [ 2.236571] [<ffffff800837fdb0>] driver_register+0x60/0xf8 [ 2.242237] [<ffffff8008380ef4>] __platform_driver_register+0x44/0x50 [ 2.248891] [<ffffff80086fd440>] ci_hdrc_usb2_driver_init+0x18/0x20 [ 2.255365] [<ffffff8008082950>] do_one_initcall+0x38/0x128 [ 2.261121] [<ffffff80086e0d00>] kernel_init_freeable+0x1ac/0x250 [ 2.267414] [<ffffff800852f0b8>] kernel_init+0x10/0x100 [ 2.272810] [<ffffff8008082680>] ret_from_fork+0x10/0x50 Cc: stable <stable@vger.kernel.org> Fixes: 3f124d233e97 ("usb: chipidea: add role init and destroy APIs") Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-05-18usb: chipidea: imx: Do not access CLKONOFF on i.MX51Andrey Smirnov
Unlike i.MX53, i.MX51's USBOH3 register file does not implemenent registers past offset 0x018, which includes MX53_USB_CLKONOFF_CTRL_OFFSET and trying to access that register on said platform results in external abort. Fix it by enabling CLKONOFF accessing codepath only for i.MX53. Cc: stable <stable@vger.kernel.org> Fixes 3be3251db088 ("usb: chipidea: imx: Disable internal 60Mhz clock with ULPI PHY") Cc: cphealy@gmail.com Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-05-18usb: chipidea: properly handle host or gadget initialization failureJisheng Zhang
If ci_hdrc_host_init() or ci_hdrc_gadget_init() returns error and the error != -ENXIO, as Peter pointed out, "it stands for initialization for host or gadget has failed", so we'd better return failure rather continue. And before destroying the otg, i.e ci_hdrc_otg_destroy(ci), we should also check ci->roles[CI_ROLE_GADGET]. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-04-18Merge tag 'usb-ci-v4.12-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Two changes for this v4.12-rc1: - Add sysfs entry for role switch - Update gadget state after gadget back from suspend
2017-04-14usb: chipidea: core: add sysfs groupPeter Chen
Sometimes, the user needs to adjust some properties for controllers, eg the role for controller, we add sysfs group for them. The attribute 'role' is used to switch host/gadget role dynamically, the uewr can read the current role, and write the other role compare to current one to finish the switch. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-03-23usb: chipidea: use bus->sysdev for DMA configurationArnd Bergmann
Set the dma for chipidea from sysdev. This is inherited from its parent node. Also, do not set dma mask for child as it is not required now. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HWyuan linyu
a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-15usb: chipidea: udc: update gadget state after bus resumeLi Jun
Gadget state is set to be suspended when bus suspened, but not updated after resume, this patch saves the gadget state before suspend and restores it after resume. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-02-03usb: chipidea: msm: Fix return value check in ci_hdrc_msm_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 2fc305be364e ("usb: chipidea: msm: Mux over secondary phy at the right time") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-02-03usb: chipidea: Configure phy for appropriate modeStephen Boyd
When the qcom chipidea controller is used with an extcon, we need to signal device mode or host mode to the phy so it can configure itself for the correct mode. This should be done after the phy is powered up, so that the register writes work correctly. Add in the appropriate phy_set_mode() call here. Cc: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-23usb: chipidea: usb2: delete the redundant setting default DMA mask codeJisheng Zhang
Similar as commit 2b2fe36def08 ("usb: chipidea: imx: delete the redundant setting default DMA mask code"), the ci_hdrc_usb2 platform device is also created by device tree, the default DMA mask should be already set by of_dma_configure when the device are created. So delete the redundant code at driver. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-23usb: chipidea: delete an useless header includeJisheng Zhang
<linux/phy.h> is for net phy drivers, we don't need it. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Drop lock across event_notify during gadget stopStephen Boyd
The CI_HDRC_CONTROLLER_STOPPED_EVENT may want to call sleeping APIs similar to how _gadget_stop_activity() may. Let's drop the lock across the event so that glue drivers can make sleeping calls. Cc: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Be silent on probe defer errorsStephen Boyd
If something fails in ci_hdrc_add_device() due to probe defer, we shouldn't print an error message. Be silent in this case as we'll try probe again later. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Handle phy power statesStephen Boyd
The ULPI phy on qcom platforms needs to be initialized and powered on after a USB reset and before we toggle the run/stop bit. Otherwise, the phy locks up and doesn't work properly. Hook the phy initialization into the RESET event and the phy power off into the STOPPED event. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Add reset controller for PHY POR bitStephen Boyd
The MSM chipidea wrapper has two bits that are used to reset the first or second phy. Add support for these bits via the reset controller framework, so that phy drivers can reset their hardware at the right time during initialization. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Make platform data driver local instead of globalStephen Boyd
If two devices are probed with this same driver, they'll share the same platform data structure, while the chipidea core layer writes and modifies it. This can lead to interesting results especially if one device is an OTG type chipidea controller and another is a host. Let's create a copy of this structure per each device instance so that odd things don't happen. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Restore wrapper settings after resetStephen Boyd
When the RESET bit is set in the USBCMD register it resets quite a few of the wrapper's registers to their reset state. This includes the GENCONFIG and GENCONFIG2 registers. Currently this is done by the usb phy and ehci-msm drivers writing into the controller wrapper's MMIO address space. Let's consolidate the register writes into the wrapper driver instead so that we clearly split the wrapper from the phys. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Mux over secondary phy at the right timeStephen Boyd
We need to pick the correct phy at runtime based on how the SoC has been wired onto the board. If the secondary phy is used, take it out of reset and mux over to it by writing into the TCSR register. Make sure to do this on reset too, because this register is reset to the default value (primary phy) after the RESET bit is set in USBCMD. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Add proper clk and reset supportStephen Boyd
The msm chipidea controller uses two main clks, an AHB clk to read/write the MMIO registers and a core clk called the system clk that drives the controller itself. Add support for these clks as they're required in all designs. Also add support for an optional third clk that we need to turn on to reset the controller and wrapper logic and other "housekeeping" things. This clk was removed in later revisions of the hardware because the reset methodology no longer required clks to be enabled to propagate resets. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Use hw_write_id_reg() instead of writelStephen Boyd
The MSM_USB_BASE macro trick is not very clear, and we're using it for only one register write so let's just move to using hw_write_id_reg() and passing the ci pointer instead. That clearly shows what offset we're using and avoids needing to include the msm_hsusb_hw.h file when we're going to delete that file soon. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Rely on core to override AHBBURSTStephen Boyd
The core framework already handles setting this parameter with a platform quirk. Add the appropriate flag so that we always set AHBBURST to 0. Technically DT should be doing this, but we always do it for msm chipidea devices so setting the flag in the driver works just as well. If the burst needs to be anything besides 0, we expect the 'ahb-burst-config' dts property to be present. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: msm: Mark device as runtime pm activeStephen Boyd
We're not properly marking the glue layer/wrapper device as runtime active, so runtime PM believes that the hardware state is inactive when we call pm_runtime_enable() in this driver. This causes a problem when the glue layer has a power domain associated with it, because runtime PM will go and disable the power domain to match the 'inactive' state of the device. Let's mark the device as active so that runtime PM doesn't improperly power down this device when it's actually active. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: vbus event may exist before starting gadgetPeter Chen
At some situations, the vbus may already be there before starting gadget. So we need to check vbus event after switching to gadget in order to handle missing vbus event. The typical use cases are plugging vbus cable before driver load or the vbus has already been there after stopping host but before starting gadget. Signed-off-by: Peter Chen <peter.chen@nxp.com> Tested-by: Stephen Boyd <stephen.boyd@linaro.org> Reported-by: Stephen Boyd <stephen.boyd@linaro.org>
2017-01-20usb: chipidea: Consolidate extcon notifiersStephen Boyd
The two extcon notifiers are almost the same except for the variable name for the cable structure and the id notifier inverts the cable->state logic. Make it the same and replace two functions with one to save some lines. This also makes it so that the id cable state is true when the id pin is pulled low, so we change the name of ->state to ->connected to properly reflect that we're interested in the cable being connected. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Add support for ULPI PHY busStephen Boyd
Some phys for the chipidea controller are controlled via the ULPI viewport. Add support for the ULPI bus so that these sorts of phys can be probed and read/written automatically without having to duplicate the viewport logic in each phy driver. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Remove locking in ci_udc_start()Stephen Boyd
We don't call hw_device_reset() with the ci->lock held, so it doesn't seem like this lock here is protecting anything. Let's just remove it. This allows us to call sleeping functions like phy_init() from within the CI_HDRC_CONTROLLER_RESET_EVENT hook. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Notify events when switching host modeStephen Boyd
The chipidea/udc.c file sends a CI_HDRC_CONTROLLER_RESET_EVENT to the wrapper drivers when it calls hw_device_reset(), but that function is not called from chipidea/host.c. And the udc.c file sends the CI_HDRC_CONTROLLER_STOPPED_EVENT but the host.c file doesn't do anything. The intent of the reset event is to allow the wrapper driver to do any wrapper specific things after the reset bit has been set in the usb command register. Therefore, add this event hook in the host role after we toggle that bit. Similarly, the intent of the stopped event is to allow the wrapper driver to do any wrapper specific things after the device is stopped. So when we stop the host role, send the stopped event. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Add platform flag for wrapper phy managementStephen Boyd
The ULPI phy on qcom platforms needs to be initialized and powered on after a USB reset and before we toggle the run/stop bit. Otherwise, the phy locks up and doesn't work properly. Therefore, add a flag to skip any phy power management in the core layer, leaving it up to the glue driver to manage. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Handle extcon events properlyStephen Boyd
We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipidea: Only read/write OTGSC from one placeStephen Boyd
With the id and vbus detection done via extcon we need to make sure we poll the status of OTGSC properly by considering what the extcon is saying, and not just what the register is saying. Let's move this hw_wait_reg() function to the only place it's used and simplify it for polling the OTGSC register. Then we can make certain we only use the hw_read_otgsc() API to read OTGSC, which will make sure we properly handle extcon events. Acked-by: Peter Chen <peter.chen@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Ivan T. Ivanov" <iivanov.xz@gmail.com> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2017-01-20usb: chipdata: Replace the extcon APIChanwoo Choi
This patch uses the resource-managed extcon API for extcon_register_notifier() and replaces the deprecated extcon API as following: - extcon_get_cable_state_() -> extcon_get_state() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-12-25ktime: Get rid of the unionThomas Gleixner
ktime is a union because the initial implementation stored the time in scalar nanoseconds on 64 bit machine and in a endianess optimized timespec variant for 32bit machines. The Y2038 cleanup removed the timespec variant and switched everything to scalar nanoseconds. The union remained, but become completely pointless. Get rid of the union and just keep ktime_t as simple typedef of type s64. The conversion was done with coccinelle and some manual mopping up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-11-28Merge tag 'usb-ci-v4.10-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Adding ULPI PHY support for imx53 - Properly mark little endian descriptors for udc
2016-11-28Merge 4.9-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-06-24 11:22:19 +0000