summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ohci-pci.c
AgeCommit message (Collapse)Author
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-23ohci-pci: add qemu quirkGerd Hoffmann
On a loaded virtualization host (dozen guests booting at the same time) it may happen that the ohci controller emulation doesn't manage to do timely frame processing, with the result that the io watchdog fires and considers the controller being dead, even though it's only the emulation being unusual slow due to the load peak. So, add a quirk for qemu and don't use the watchdog in case we figure we are running on emulated ohci. The virtual ohci controller masquerades as apple ohci controller, but we can identify it by subsystem id. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-03USB: OHCI: fix problem with global suspend on ATI controllersAlan Stern
Some OHCI controllers from ATI/AMD seem to have difficulty with "global" USB suspend, that is, suspending an entire USB bus without setting the suspend feature for each port connected to a device. When we try to resume the child devices, the controller gives timeout errors on the unsuspended ports, requiring resets, and can even cause ohci-hcd to hang; see http://marc.info/?l=linux-usb&m=139514332820398&w=2 and the following messages. This patch fixes the problem by adding a new quirk flag to ohci-hcd. The flag causes the ohci_rh_suspend() routine to suspend each unsuspended, enabled port before suspending the root hub. This effectively converts the "global" suspend to an ordinary root-hub suspend. There is no need to unsuspend these ports when the root hub is resumed, because the child devices will be resumed anyway in the course of a normal system resume ("global" suspend is never used for runtime PM). This patch should be applied to all stable kernels which include commit 0aa2832dd0d9 (USB: use "global suspend" for system sleep on USB-2 buses) or a backported version thereof. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Peter Münster <pmlists@free.fr> Tested-by: Peter Münster <pmlists@free.fr> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-03usb: ohci: use amd_chipset_type to filter for SB800 prefetchHuang Rui
Commit "usb: pci-quirks: refactor AMD quirk to abstract AMD chipset types" introduced a new AMD chipset type to filter AMD platforms with different chipsets. According to a recent thread [1], this patch updates SB800 prefetch routine in AMD PLL quirk. And make it use the new chipset type to represent SB800 generation. [1] http://marc.info/?l=linux-usb&m=138012321616452&w=2 Signed-off-by: Huang Rui <ray.huang@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25usb: ohci/uhci - add soft dependencies on ehci_pciTom Gundersen
Support for specifying soft dependencies in the modules themselves was introduced in commit 7cb14ba. In Arch we have always been shipping a module.d(5) fragment ordering ohci/uhci after ehci. If this ordering is really necessary, it would be great to move it to the kernel and getting the correct fragment generated by depmod. Signed-off-by: Tom Gundersen <teg@jklm.no> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-03Merge tag 'usb-3.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big USB driver pull request for 3.12-rc1 Lots of USB driver fixes and updates. Nothing major, just the normal xhci, gadget, and other driver changes. Full details in the shortlog" * tag 'usb-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (352 commits) usbcore: fix incorrect type in assignment in descriptors_changed() usbcore: compare and release one bos descriptor in usb_reset_and_verify_device() ehci: remove debugging statement with ehci statistics in ehci_stop() ehci: remove duplicate debug_async_open() prototype in ehci-dbg.c ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is set ehci: remove ehci_vdbg() verbose debugging statements Documentation sysfs-bus-usb: Document which files are used by libusb Documentation sysfs-bus-usb: Document the speed file used by libusb Documentation sysfs-bus-usb: Move files with known users to stable USB: fix build error when CONFIG_PM_SLEEP isn't enabled usb: r8a66597-hcd: use platform_{get,set}_drvdata() usb: phy-tegra-usb: use platform_{get,set}_drvdata() usb: acm gadget: Null termintate strings table dma: cppi41: off by one in desc_to_chan() xhci: Fix warning introduced by disabling runtime PM. dev-core: fix build break when DEBUG is enabled USB: OHCI: Allow runtime PM without system sleep usb: ohci-at91: remove unnecessary dev_set_drvdata() usb: renesas_usbhs: use platform_{get,set}_drvdata() usb: fotg210-udc: use platform_{get,set}_drvdata() ...
2013-08-27USB: OHCI: Allow runtime PM without system sleepAlan Stern
Since ohci-hcd supports runtime PM, the .pm field in its pci_driver structure should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. Without this change, OHCI controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26USB: OHCI: fix build error related to ohci_suspend/resumeAlan Stern
Commit 9a11899c5e69 (USB: OHCI: add missing PCI PM callbacks to ohci-pci.c) added missing ohci_suspend and ohci_resume callback pointers, but forgot that these callbacks are declared and defined only when CONFIG_PM is enabled. This patch adds a preprocessor conditional to avoid build errors when PM is disabled. Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Meelis Roos <mroos@linux.ee>, Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-23USB: OHCI: add missing PCI PM callbacks to ohci-pci.cAlan Stern
Commit c1117afb8589 (USB: OHCI: make ohci-pci a separate driver) neglected to preserve the entries for the pci_suspend and pci_resume driver callbacks. As a result, OHCI controllers don't work properly during suspend and after hibernation. This patch adds the missing callbacks to the driver. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Steve Cotton <steve@s.cotton.clara.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30USB: OHCI: make ohci-pci a separate driverManjunath Goudar
This patch splits the PCI portion of ohci-hcd out into its own separate driver module, called ohci-pci. The major point of difficulty lies in ohci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ohci_start() some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. The complete sb800_prefetch() function moved to ohci-q.c,because its only related to ohci-pci driver. USB_OHCI_HCD_PCI symbol no longer dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF that's what removed. V2: - few specific content of pci related code in ohci_pci_start function has been moved to ohci_pci_reset and rest of the generic code is written in ohci_start of ohci-hcd.c file. V3: - ohci_restart() has been called in ohci_pci_reset() function for to reset the ohci pci. V4: -sb800_prefetch() moved to ohci-q.c,because its only related to ohci-pci. -no longer _creating_ CONFIG_USB_OHCI_PCI,creating CONFIG_USB_OHCI_HCD_PCI. -overrides renamed with pci_override,its giving proper meaning. V5: -sb800_prefetch() moved to pci-quirks.c,because its only related to pci. V6: -sb800_prefetch() function has been moved to pci-quirks.c made as separate patch in 2/3. -Most of the generic ohci pci changes moved in 2/3 patch,now this is complete ohci-pci separation patch. V7: -Unrelated include file has been removed from ohci.h file. V8: -USB_OHCI_HCD_PCI symbol does not dependence on STB03xxx, PPC_MPC52xx and USB_OHCI_HCD_PPC_OF. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30USB: OHCI: Generic changes to make ohci-pci a separate driverManjunath Goudar
Note that this changes is part of separating the ohci pci host controller driver from ohci-hcd host code. This contains : -Moved sb800_prefetch() function from ohci-pci.c to pci-quirks.c file and EXPORTed, this is part of the effort to move the ohci pci related code to generic pci code. -Passed "device" argument instead of "ohci_hcd" in sb800_prefetch() function to avoid extra include file in pci-quirks.c. V2: -Passed "device" argment instead of "pci_dev", then we use to_pci_dev() to get the "pci_dev" structure. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30USB: OHCI: prepare to make ohci-hcd a library moduleManjunath Goudar
This patch prepares ohci-hcd for being split up into a core library and separate platform driver modules. A generic ohci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ohci_restart(),ohci_suspend() and ohci_resume() routines need to be EXPORTed for use by the drivers. Added ohci_setip(() and ohci_start() routine for to start the generic controller rather than each having its own idiosyncratic approach. This allow to clean duplicated code in most of SOC driver In V2: -ohci_hcd_init() ohci_run() and ohci_stop() are not made non-static. -Adds the ohci_setup() and ohci_start() routine. In V3: -purpose of ohci_setup() and ohci_start() function description written in the patch description. -ohci_init() are not made non-static but now called beginning of the ohci_restart(). -ohci_run() signature change reverted back. -unrelated changes removed. -duplicate comment line removed. -inline ohci_suspend() and ohci_resume() is not needed so removed from ohci.h file. In V4: -ohci-init() EXPORTed because it is called by all bus glue modules. -ohci-setup() removed from 1/2 added into 2/2 patch. In V5: -Again ohci_setup() is added and EXPORTed because to replace the ohci_init() from all bus glues. -ohci_init() is not made non-static function. In V6: -ohci_init() call is removed from ohci_quirk_nec_worker(), because it is already called in ohci_restart(). In V8: -ohci_hcd_init() is called by ohci_setup() to make generic ohci initialization in all ohci drivers. Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Geoff Levand <geoff@infradead.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Olav Kongas <ok@artecdesign.ee> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22USB: ohci: move ohci_pci_{suspend,resume} to ohci-hcd.cFlorian Fainelli
As suggested by Alan Stern, move the ohci-pci.c ohci_pci_{suspend,resume} routines to ohci-hcd.c. Due to their move, also rename them to ohci_{suspend,resume} to make it clear they operate on ohci_hcd. Since they are not necessarily called, annotate them with __maybe_unused, and make them enclosed within an #ifdef CONFIG_PM / #endif section. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-24usb: add support for STA2X11 host driverAlessandro Rubini
Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26Merge 3.2-rc3 into usb-linusGreg Kroah-Hartman
This pulls in the latest USB bugfixes and helps a few of the drivers merge nicer in the future due to changes in both branches. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18OHCI: final fix for NVIDIA problems (I hope)Alan Stern
Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by: Arno Augustin <Arno.Augustin@web.de> Cc: stable <stable@vger.kernel.org> [after tested in 3.2 for a while] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18OHCI: remove uses of hcd->stateAlan Stern
This patch (as1500) removes all uses of the objectionable hcd->state variable from the ohci-hcd family of drivers. It is replaced by a private ohci->rh_state field, just as in uhci-hcd and ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-17OHCI: fix regression caused by nVidia shutdown workaroundAlan Stern
This patch (as1463) fixes a regression caused by commit 3df7169e73fc1d71a39cffeacc969f6840cdf52b (OHCI: work around for nVidia shutdown problem). The original problem encountered by people using NVIDIA chipsets was that USB devices were not turning off when the system shut down. For example, the LED on an optical mouse would remain on, draining a laptop's battery. The problem was caused by a bug in the chipset; an OHCI controller in the Reset state would continue to drive a bus reset signal even after system shutdown. The workaround was to put the controllers into the Suspend state instead. It turns out that later NVIDIA chipsets do not suffer from this bug. Instead some have the opposite bug: If a system is shut down while an OHCI controller is in the Suspend state, USB devices remain powered! On other systems, shutting down with a Suspended controller causes the system to reboot immediately. Thus, working around the original bug on some machines exposes other bugs on other machines. The best solution seems to be to limit the workaround to OHCI controllers with a low-numbered PCI product ID. I don't know exactly at what point NVIDIA changed their chipsets; the value used here is a guess. So far it was worked out okay for all the people who have tested it. This fixes Bugzilla #35032. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by: Yury Siamashka <yurand2@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07USB: OHCI: use pci_dev->revisionSergei Shtylyov
Commit ab1666c1364a209e6141d7c14e47a42b5f00eca2 (USB: quirk PLL power down mode) added code that reads the revision ID from the PCI configuration register while it's stored by PCI subsystem in the 'revision' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-01USB host: Move AMD PLL quirk to pci-quirks.cAndiry Xu
This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c, and exports the functions to be used by xHCI driver later. AMD PLL quirk disable the optional PM feature inside specific SB700/SB800/Hudson-2/3 platforms under the following conditions: 1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. Without AMD PLL quirk, USB isochronous stream may stutter or have breaks occasionally, which greatly impair the performance of audio/video streams. Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be added to xHCI driver too. They are doing similar things actually, so move the quirk code to pci-quirks.c, which has several advantages: 1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and make them cleaner; 2. AMD chipset information will be probed only once and then stored. Currently they're probed during every OHCI/EHCI initialization, move the detect code to pci-quirks.c saves the repeat detect cost; 3. Build up synchronization among OHCI/EHCI/xHCI driver. In current code, every host controller enable/disable PLL only according to its own status, and may enable PLL while there is still isoc transfer on other HCs. Move the quirk to pci-quirks.c prevents this issue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17Revert "USB host: Move AMD PLL quirk to pci-quirks.c"Greg Kroah-Hartman
This reverts commit b7d5b439b7a40dd0a0202fe1c118615a3fcc3b25. It conflicts with commit baab93afc2844b68d57b0dcca5e1d34c5d7cf411 "USB: EHCI: ASPM quirk of ISOC on AMD Hudson" and merging the two just doesn't work properly. Cc: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04USB host: Move AMD PLL quirk to pci-quirks.cAndiry Xu
This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c, and exports the functions to be used by xHCI driver later. AMD PLL quirk disable the optional PM feature inside specific SB700/SB800/Hudson-2/3 platforms under the following conditions: 1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. Without AMD PLL quirk, USB isochronous stream may stutter or have breaks occasionally, which greatly impair the performance of audio/video streams. Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be added to xHCI driver too. They are doing similar things actually, so move the quirk code to pci-quirks.c, which has several advantages: 1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and make them cleaner; 2. AMD chipset information will be probed only once and then stored. Currently they're probed during every OHCI/EHCI initialization, move the detect code to pci-quirks.c saves the repeat detect cost; 3. Build up synchronization among OHCI/EHCI/xHCI driver. In current code, every host controller enable/disable PLL only according to its own status, and may enable PLL while there is still isoc transfer on other HCs. Move the quirk to pci-quirks.c prevents this issue. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alex He <alex.he@amd.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22OHCI: work around for nVidia shutdown problemAlan Stern
This patch (as1417) fixes a problem affecting some (or all) nVidia chipsets. When the computer is shut down, the OHCI controllers continue to power the USB buses and evidently they drive a Reset signal out all their ports. This prevents attached devices from going to low power. Mouse LEDs stay on, for example, which is disconcerting for users and a drain on laptop batteries. The fix involves leaving each OHCI controller in the OPERATIONAL state during system shutdown rather than putting it in the RESET state. Although this nominally means the controller is running, in fact it's not doing very much since all the schedules are all disabled. However there is ongoing DMA to the Host Controller Communications Area, so the patch also disables the bus-master capability of all PCI USB controllers after the shutdown routine runs. The fix is applied only to nVidia-based PCI OHCI controllers, so it shouldn't cause problems on systems using other hardware. As an added safety measure, in case the kernel encounters one of these running controllers during boot, the patch changes quirk_usb_handoff_ohci() (which runs early on during PCI discovery) to reset the controller before anything bad can happen. Reported-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Tested-by: Pali Rohár <pali.rohar@gmail.com> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: add do_wakeup parameter for PCI HCD suspendAlan Stern
This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend method used by PCI-based host controller drivers. ehci-hcd in particular needs to know whether or not to enable wakeup when suspending a controller. Although that information is currently available through device_may_wakeup(), when support is added for runtime suspend this will no longer be true. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-17USB: ohci: quirk AMD prefetch for USB 1.1 ISO transferLibin Yang
The following patch in the driver is required to avoid USB 1.1 device failures that may occur due to requests from USB OHCI controllers may be overwritten if the latency for any pending request by the USB controller is very long (in the range of milliseconds). Signed-off-by: Libin Yang <libin.yang@amd.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: new flag for resume-from-hibernationAlan Stern
This patch (as1237) changes the way the PCI host controller drivers avoid retaining bogus hardware states during resume-from-hibernation. Previously we had reset the hardware as part of preparing to reinstate the memory image. But we can do better now with the new PM framework, since we know exactly which resume operations are from hibernation. The pci_resume method is changed to accept a flag indicating whether the system is resuming from hibernation. When this flag is set, the drivers will reset the hardware to get rid of any existing state. Similarly, the pci_suspend method is changed to remove the pm_message_t argument. It's no longer needed, since no special action has to be taken when preparing to reinstate the memory image. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15USB: move PCI host controllers to new PM frameworkAlan Stern
This patch (as1236) converts the USB PCI power management routines over to the new PM framework. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-17USB/PCI: Fix resume breakage of controllers behind cardbus bridgesRafael J. Wysocki
If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27USB: Fix suspend-resume of PCI USB controllersRafael J. Wysocki
Commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 (USB: fix up suspend and resume for PCI host controllers) attempted to fix the suspend-resume of PCI USB controllers, but unfortunately it did that incorrectly and interrupts are left enabled by the USB controllers' ->suspend_late() callback as a result. This leads to serious problems during suspend which are very difficult to debug. Fix the issue by removing the ->suspend_late() callback of PCI USB controllers and moving the code from there to the ->suspend() callback executed with interrupts enabled. Additionally, make the ->resume() callback of PCI USB controllers execute pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the full power state (PCI_D0). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: "Jeff Chua" <jeff.chua.linux@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: "Zdenek Kabelac" <zdenek.kabelac@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: automatically enable wakeup for PCI host controllersAlan Stern
This patch (as1193b) enables wakeup during initialization for all PCI host controllers, and it removes some code (and comments!) that are no longer needed now that the PCI core automatically initializes wakeup settings for all new devices. The idea is that the bus should initialize wakeup, and the bus glue or controller driver should enable it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: fix up suspend and resume for PCI host controllersAlan Stern
This patch (as1192) rearranges the USB PCI host controller suspend and resume and resume routines: Use pci_wake_from_d3() for enabling and disabling wakeup, instead of pci_enable_wake(). Carry out the actual state change while interrupts are disabled. Change the order of the preparations to agree with the general recommendation for PCI devices, instead of messing around with the wakeup settings while the device is in D3. In .suspend: Call the underlying driver to disable IRQ generation; pci_wake_from_d3(device_may_wakeup()); pci_disable_device(); In .suspend_late: pci_save_state(); pci_set_power_state(D3hot); (for PPC_PMAC) Disable ASIC clocks In .resume_early: (for PPC_PMAC) Enable ASIC clocks pci_set_power_state(D0); pci_restore_state(); In .resume: pci_enable_device(); pci_set_master(); pci_wake_from_d3(0); Call the underlying driver to reenable IRQ generation Add the necessary .suspend_late and .resume_early method pointers to the PCI host controller drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: automatically enable RHSC interruptsAlan Stern
This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: quirk PLL power down modeLibin Yang
On some AMD 700 series southbridges, ISO OUT transfers (such as audio playback through speakers) on the USB OHCI controller may be corrupted when an A-Link express power saving feature is active. PLL power down mode in conjunction with link power management feature L1 being enabled is the bad combination ... this patch prevents them from being enabled when ISO transfers are pending. Signed-off-by: Crane Cai <crane.cai@amd.com> Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-06Revert "USB: don't explicitly reenable root-hub status interrupts"Linus Torvalds
This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24USB: don't explicitly reenable root-hub status interruptsAlan Stern
This patch (as1069b) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: OHCI: host-controller resumes leave root hub suspendedAlan Stern
Drivers in the ohci-hcd family should perform certain tasks whenever their controller device is resumed. These include checking for loss of power during suspend, turning on port power, and enabling interrupt requests. Until now these jobs have been carried out when the root hub is resumed, not when the controller is. Many drivers work around the resulting awkwardness by automatically resuming their root hub whenever the controller is resumed. But this is wasteful and unnecessary. To simplify the situation, this patch (as1066) adds a new core routine, ohci_finish_controller_resume(), which can be used by all the OHCI-variant drivers. They can call the new routine instead of resuming their root hubs. And ohci-pci.c can call it instead of using its own special-purpose handler. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: clarify usage of hcd->suspend/resume methodsAlan Stern
The .suspend and .resume method pointers in struct usb_hcd have not been fully understood by host-controller driver writers. They are meant for use with PCI controllers; other platform-specific drivers generally should not refer to them. To try and clarify matters, this patch (as1065) renames those methods to .pci_suspend and .pci_resume. It eliminates corresponding dead code and bogus references in the ohci-ssb and u132-hcd drivers. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24USB: OHCI: fix bug in controller resumeAlan Stern
This patch (as1063) fixes a bug in the way ohci-hcd resumes its controllers. It leaves the Master Interrupt Enable bit turned off. If the root hub is resumed immediately this won't matter. But if the root hub is suspended (say because no devices are plugged in), it won't ever wake up by itself. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12USB: OHCI handles more ZFMicro quirksMike Nuss
The ZF Micro OHCI controller exhibits unexpected behavior that seems to be related to high load. Under certain conditions, the controller will complete a TD, remove it from the endpoint's queue, and fail to add it to the donelist. This causes the endpoint to appear to stop responding. Worse, if the device is removed while in that state, OHCI will hang while waiting for the orphaned TD to complete. The situation is not recoverable without rebooting. This fix enhances the scope of the existing OHCI_QUIRK_ZFMICRO flag: 1. A watchdog routine periodically scans the OHCI structures to check for orphaned TDs. In these cases the TD is taken back from the controller and completed normally. 2. If a device is removed while the endpoint is hung but before the watchdog catches the situation, any outstanding TDs are taken back from the controller in the 'sanitize' phase. The ohci-hcd driver used to print "INTR_SF lossage" in this situation; this changes it to the universally accurate "ED unlink timeout". Other instances of this message presumably have different root causes. Both this Compaq quirk and a NEC quirk are now properly compiled out for non-PCI builds of this driver. Signed-off-by: Mike Nuss <mike@terascala.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: Fix NEC OHCI chip silicon bugMichael Hanselmann
This patch fixes a silicon bug in some NEC OHCI chips. The bug appears at random times and is very, very difficult to reproduce. Without the following patch, Linux would shut the chip and its associated devices down. In Apple PowerBooks this leads to an unusable keyboard and mouse (SSH still working). The idea of restarting the chip is taken from public Darwin code. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-12USB: EHCI, OHCI: handover changesAlan Stern
This patch (as887) changes the way ehci-hcd and ohci-hcd handle a loss of VBUS power during suspend. In order for the USB-persist facility to work correctly, it is necessary for low- and full-speed devices attached to a high-speed port to be handed back to the companion controller during resume processing. This entails three changes: adding code to ehci-hcd to perform the handover, removing code from ohci-hcd to turn off ports during root-hub reinit, and adding code to ohci-hcd to turn on ports during PCI controller resume. (Other bus glue resume methods for platforms supporting high-speed controllers would need a similar change, if any existed.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-22USB: Fix USB OHCI Subvendor for Toshiba Portege 4000Andrey Borzenkov
This fixes a bug in an OHCI quirk handler for Portege 4000; the Subvendor is 0x1179 (PCI_VENDOR_ID_TOSHIBA) not 0x102f (PCI_VENDOR_ID_TOSHIBA_2) bugid 8510 00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Unknown device [1179:0004] Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at f7eff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: quirk for broken suspend of IT8152F/GRaphael Assenat
Here's a patch which adds my device to the list. This patch enables the broken suspend quirk for the PCI OHCI controller present in the IT8152F/G RISC-to-PCI Companion Chip. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add an ohci board-specific quirkDavid Brownell
Use the new ohci-pci quirk infrastructure to address the problem it was created to address: a quirk specific to the Portege 4000, in buzilla as http://bugzilla.kernel.org/show_bug.cgi?id=6723 Also fix a misuse of "__devinit" for the quirk functions. It must not be used without first ensuring that the references from the quirk tables are gone, and that the function using those quirk tables is also gone. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07ohci: Rework bus glue integration to allow several at onceSylvain Munaut
The previous model had the module_init & module_exit function in the bus glue .c files themselves. That's a problem if several glues need to be selected at once and the driver is built has module. This case is quite common in embedded system where you want to handle both the integrated ohci controller and some extra controller on PCI. The ohci-hcd.c file now provide the module_init & module_exit and appropriate driver registering/unregistering is done conditionally, using #ifdefs. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Implement support for "split" endian OHCIBenjamin Herrenschmidt
This patch separates support for big endian MMIO register access and big endian descriptors in order to support the Toshiba SCC implementation which has big endian registers but little endian in-memory descriptors. It simplifies the access functions a bit in ohci.h while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07USB: Rework the OHCI quirk mecanism as suggested by DavidBenjamin Herrenschmidt
This patch applies David Brownell's suggestion for reworking the OHCI quirk mechanism via a table of PCI IDs. It adapts the existing quirks to use that mechanism. This also moves the quirks to reset() as suggested by the comment in there. This is necessary as we need to have the endian properly set before we try to init the controller. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20USB: ohci whitespace/comment fixupsDavid Brownell
This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace (space before tab, at end of line) as well as the obsolete inline changelog. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28ohci: Use ref-counting hotplug safe interfacesAlan Cox
We want to avoid legacy APIs like pci_find_slot(). Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>