summaryrefslogtreecommitdiff
path: root/drivers/usb/mtu3/mtu3_core.c
AgeCommit message (Collapse)Author
2022-09-30usb: mtu3: fix failed runtime suspend in host only modeChunfeng Yun
When the dr_mode is "host", after the host enter runtime suspend, the mtu3 can't do it, because the mtu3's device wakeup function is not enabled, instead it's enabled in gadget init function, to fix the issue, init wakeup early in mtu3's probe() Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reported-by: Tianping Fang <tianping.fang@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220929064459.32522-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-08usb: mtu3: add feature to disable device's usb3 portChunfeng Yun
We may want to disable device's usb3 port when the combo phy is switched from usb3 mode to pcie mode for some projects. Meanwhile rename member @is_u3_ip to @u3_capable to avoid misleading, due to the member's value may be changed when disable usb3 port, but the controller is still a usb3 IP which also tells us how to manage the fifo. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220708071903.25752-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: mtu3: register mtu3_irq by threaded irqChunfeng Yun
Use threaded irq to improve time consuming top-half Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220609074233.15532-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-13usb: mtu3: restore HS function when set SS/SSPChunfeng Yun
Due to HS function is disabled when set as FS, need restore it when set as SS/SSP. Fixes: dc4c1aa7eae9 ("usb: mtu3: add ->udc_set_speed()") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1628836253-7432-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27usb: mtu3: support suspend/resume for dual-role modeChunfeng Yun
Support suspend/resume for dual-role mode including the single port and multi-ports supported by host controller, when the host supports mult-ports, only port0 (u2/u3) is used to support dual role mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-14-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27usb: mtu3: support suspend/resume for device modeChunfeng Yun
Support suspend/resume for device mode if the device is not connected with a host, otherwise reject to suspend. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-13-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27usb: mtu3: add helper to power on/down deviceChunfeng Yun
Add helper to power on/down device ports and ip, it will be used when support device suspend/resume Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27usb: mtu3: support runtime PM for host modeChunfeng Yun
Use a dedicated wakeup irq for runtime suspend/resume, and interrupts names are provided if using wakeup irq, this patch only support host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15usb: mtu3: power down port when power down device IPChunfeng Yun
When power down device IP, we can also power down device port, then power on the port again when power on device ip, it's helpful to make device ip enter ip sleep mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15usb: mtu3: power down device IP by defaultChunfeng Yun
Power down device IP by default until @udc_start is called. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: mtu3: remove repeated setting of speedChunfeng Yun
mtu3_gadget_start() will set speed, no need set it again in mtu3_gadget_set_speed(), just save the desired speed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03usb: mtu3: remove mtu3_ep0_setup() declaration in mtu3.hChunfeng Yun
It's defined and only used in the same file, so remove its declaration in mtu3.h, and make it static Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: clear dual mode of u3port when disable deviceChunfeng Yun
If not clear u3port's dual mode when disable device, the IP will fail to enter sleep mode when suspend. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: add ->udc_set_speed()Chunfeng Yun
Make use of the method to make sure connect on speeds supported by the gadget driver. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: introduce a funtion to check maximum speedChunfeng Yun
The max_speed got from DTS may be not supported by the hardware, so need check it, and assign a proper default value. And make it clear by introducing a funtion. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: clear interrupts status when disable interruptsChunfeng Yun
When disable interrupts, will also want to clear their status, ensure it by calling mtu3_intr_status_clear() in mtu3_intr_disable(). Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: reinitialize CSR registersChunfeng Yun
The CSR registers will be reset as default value if the ports are disabled, so reinitialize them when the ports are enabled again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29usb: mtu3: convert to devm_platform_ioremap_resource_bynameChunfeng Yun
Use devm_platform_ioremap_resource_byname() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595404275-8449-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-03usb: mtu3: mtu3_core: Demote obvious misuse of kerneldoc to standard comment ↵Lee Jones
block No attempt has been made to document the function. Fixes the following W=1 kernel build warning(s): drivers/usb/mtu3/mtu3_core.c:805: warning: Function parameter or member 'mtu' not described in 'mtu3_set_dma_mask' Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200702144625.2533530-26-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-27usb: mtu3: fix missing include of mtu3_dr.hBen Dooks (Codethink)
The declarations of ssusb_gadget_{init,exit} are in the mtu3_dr.h file but the code does that implements them does not include this. Add the include to fix the following sparse warnigns: drivers/usb/mtu3/mtu3_core.c:825:5: warning: symbol 'ssusb_gadget_init' was not declared. Should it be static? drivers/usb/mtu3/mtu3_core.c:925:6: warning: symbol 'ssusb_gadget_exit' was not declared. Should it be static? Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-07-30usb: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add tracepoints to help debugChunfeng Yun
This patch implements a few initial tracepoints for the mtu3 driver. More traces can be added as necessary in order to ease the task of debugging. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: add debugfs interface filesChunfeng Yun
This adds more debugfs consumers. The debugfs entries read some important registers, fifo status, QMU ring, endpoint status, and IPPC probe interface to get internal status. With these entries, users can check the registers, endpoint and GPD used during run time. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: supports new QMU formatChunfeng Yun
In order to support U3gen2 ISOC transfer upto 96DPs, extend the data buffer length. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix transfer error of USB3 Gen2 isocChunfeng Yun
To support USB3 Gen2 ISOC, the registers of TXCSR1 and RXCSR1 are adjusted to support greater maxpkt and mult value, this patch fix this issue Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS modeChunfeng Yun
When the controller supports SS mode, but works as HS mode, the SOFTCONN will not be cleared automatically when clear USB3_EN by default, this cause an issue that can't disconnect from host, so clear SOFTCONN when clear USB3_EN when the class driver want to disable the D+ pullup. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: mtu3: enable SETUPENDISR interruptChunfeng Yun
If the controller receives a new SETUP during SETUP data stage, and will generate SETUPENDISR interrupt, the driver should abort the current SETUP command and process the new one. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)Chunfeng Yun
Fix the issue: device doesn't accept LGO_U1/U2: 1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2 by default; 2. enable/disable controller to initiate requests for transition into U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: mtu3: enable hardware remote wakeup from L1 automaticallyChunfeng Yun
Enable hardware remote wakeup from L1 automatically based on the FIFO status, instead of manual way. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05usb: mtu3: remove QMU checksumChunfeng Yun
The QMU checksum calculation is redundant, mostly used by debug, so remove it here. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-16Merge 4.19-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-10usb: mtu3: disable vbus rise/fall interrupts of ltssmChunfeng Yun
The vbus rise & fall interrupts are used to enable and disable U3 function of device automatically, this cause some issues when class driver is initialized as deactivated, and will skip over software-controlled connect by pullup(), but UDC wants to keep disconnect until usb_gadget_activate() is called which calls pullup() if needed. So we disable vbus rise & fall interrupts and just use pullup() to enable & disable U3 function, and reset mtu3 state when disconnect instead when vbus fall. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05usb: mtu3: fix error of xhci port id when enable U3 dual roleChunfeng Yun
If dual role mode is enabled, when switch u3port0 to device mode, it will affect port id calculation of host(xHCI), specially when host supports multi U2 ports or U3 ports, so need enable its dual role mode, and fix it here. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: reset gadget when VBUS_FALL interrupt arisesChunfeng Yun
When VBUS_FALL interrupt arises, it means U3 device is disconnected with host, so need reset status of gadget Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: fix uncontinuous SeqN issue after disable EPChunfeng Yun
Reset EP when disable it to reset data toggle for U2 EP, and SeqN, flow control status etc for U3 EP, this can avoid issue of uncontinuous SeqN Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24usb: mtu3: re-enable controller to accept LPM request after LPM resumeChunfeng Yun
After the controller receives a LPM request, it will reject the LPM request, and need software to re-enable it after LPM resume if the controller doesn't remote wakeup from L1 automatically Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07USB: mtu3: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19usb: mtu3: set otg_sel for u2port only if works as dual-role modeChunfeng Yun
When set otg_sel(SSUSB_U2_PORT_OTG_SEL) for u2port which supports dual-role mode, the controller will automatically switch mode between host and device according to IDDIG signal. But if the u2port only supports device mode, and no IDDIG pin is provided, setting otg_sel may cause failure of detection by host. So set it only for dual-role mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: add support for usb3.1 IPChunfeng Yun
Support SuperSpeedPlus for usb3.1 device IP Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: support 36-bit DMA addressChunfeng Yun
add support for 36-bit DMA address [ Felipe Balbi: fix printk format for dma_addr_t ] Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-10-19usb: mtu3: fix error return code in ssusb_gadget_init()Chunfeng Yun
When failing to get IRQ number, platform_get_irq() may return -EPROBE_DEFER, but we ignore it and always return -ENODEV, so fix it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-12-07usb: mtu3: fix U3 port link issueChunfeng Yun
the issue is introduced when @is_u3_ip is used in mtu3_device_enabe() before initialized in mtu3_mem_alloc(), so get global IP information at first before used by following functins. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-07usb: mtu3: enable auto switch from U3 to U2Chunfeng Yun
inform mac2 to build U2 link automatically after U3 detect fail without software setting soft_connect. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-14usb: mtu3: declare functions staticSudip Mukherjee
The only user of the functions mtu3_irq() and gpd_ring_empty() are in the same file. They can be declared as static. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: dual-role mode supportChunfeng Yun
support dual-role mode; there are two ways to switch between host and device modes, one is by idpin, another is by debugfs which depends on user input. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: host only mode supportChunfeng Yun
supports host only mode and the code is ported from host/xhci-mtk.c IPPC register shared between host and device is moved into common glue layer. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: mtu3: Super-Speed Peripheral mode supportChunfeng Yun
add super-speed funtion for peripheral mode Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27usb: Add MediaTek USB3 DRD driverChunfeng Yun
This patch adds support for the MediaTek USB3 controller integrated into MT8173. It currently supports High-Speed Peripheral Only mode. Super-Speed Peripheral, Dual-Role Device and Host Only (xHCI) modes will be added in the next patchs. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-06-30 19:20:45 +0000