summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/Kconfig
AgeCommit message (Collapse)Author
2014-03-05usb: musb: USB_MUSB_DUAL_ROLE/USB_MUSB_GADGET should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `txstate': musb_gadget.c:(.text+0x35955a): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x35957e): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `musb_g_giveback': (.text+0x359672): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `musb_g_giveback': (.text+0x3596ba): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `musb_g_giveback': (.text+0x3596e0): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `rxstate': musb_gadget.c:(.text+0x3599d0): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x3599f6): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `musb_gadget_queue': musb_gadget.c:(.text+0x35a8c0): undefined reference to `dma_map_single' musb_gadget.c:(.text+0x35a8d0): undefined reference to `dma_mapping_error' musb_gadget.c:(.text+0x35a906): undefined reference to `dma_sync_single_for_cpu' musb_gadget.c:(.text+0x35a9a0): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x35a9c8): undefined reference to `dma_sync_single_for_cpu' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-23usb: musb: Rework USB and USB_GADGET dependencyEzequiel Garcia
This USB controller can work in as host-only, gadget-only or dual-role modes. Rework the dependency on the USB and USB_GADGET configs in order to allow building the driver when !USB or !USG_GADGET. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-20usb: musb: add support for JZ4740 usb device controllerApelete Seketeli
Add support for Ingenic JZ4740 USB Device Controller through a specific musb glue layer. JZ4740 UDC not being OTG compatible and missing some hardware registers, this musb glue layer is written from scratch to be used in gadget mode only and take silicon design specifics into account. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-10-24Merge tag 'usb-for-v3.13' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.13 Final conversions to configfs for mass storage, acm_ms, and multi gadgets. MUSB should now work out of the box on AM335x-based boards (beagle bone white and black) with DMA thanks to Sebastian's work. We can now enable VERBOSE_DEBUG on builds of drivers/usb/gadget/ by selecting CONFIG_USB_GADGET_VERBOSE. s3c-hsotg got quite a few non-critical fixes but also learned a few new tricks (isochronous transfers, multi count support). The Marvel USB3 Controller driver got a memory leak fix. devm_usb_get_phy() learned not to return NULL, ever. Other than these patches, we have the usual set of cleanups ranging from removal of unnecessary *_set_drvdata() to using SIMPLE_DEV_PM_OPS. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-10-01usb: musb: name ux500 platforms more broadlyLinus Walleij
The Kconfig help text is talking about the U5500 which is no longer supported by the kernel. Name the help text after the config symbol which is more correct. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-27usb: musb: omap2430: use the new generic PHY frameworkKishon Vijay Abraham I
Use the generic PHY framework API to get the PHY. The usb_phy_set_resume and usb_phy_set_suspend is replaced with power_on and power_off to align with the new PHY framework. musb->xceiv can't be removed as of now because musb core uses xceiv.state and xceiv.otg. Once there is a separate state machine to handle otg, these can be moved out of xceiv and then we can start using the generic PHY framework. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-12usb: musb: dsps: make it depend on OF_IRQFelipe Balbi
musb_dsps.c utilizes a symbol which is only available when CONFIG_OF_IRQ is set, so make it depend on that. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: musb dma: add cppi41 dma driverSebastian Andrzej Siewior
This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-09usb: musb: dsps: use proper child nodesSebastian Andrzej Siewior
This moves the two instances from the big node into two child nodes. The glue layer ontop does almost nothing. There is one devices containing the control module for USB (2) phy, (2) usb and later the dma engine. The usb device is the "glue device" which contains the musb device as a child. This is what we do ever since. The new file musb_am335x is just here to prob the new bus and populate child devices. There are a lot of changes to the dsps file as a result of the changes: - musb_core_offset This is gone. The device tree provides memory ressources information for the device there is no need to "fix" things - instances This is gone as well. If we have two instances then we have have two child enabled nodes in the device tree. For instance the SoC in beagle bone has two USB instances but only one has been wired up so there is no need to load and init the second instance since it won't be used. - dsps_glue is now per glue device In the past there was one of this structs but with an array of two and each instance accessed its variable depending on the platform device id. - no unneeded copy of structs I do not know why struct dsps_musb_wrapper is copied but it is not necessary. The same goes for musb_hdrc_platform_data which allocated on demand and then again by platform_device_add_data(). One copy is enough. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modesDaniel Mack
This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-09USB: regroup all depends on USB within an if USB blockFlorian Fainelli
This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18usb: phy: remove CONFIG_USB_OTG_UTILSFelipe Balbi
there are no more users of CONFIG_USB_OTG_UTILS left in tree, we can remove it just fine. [ kishon@ti.com : fixed a linking error due to original patch forgetting to change drivers/usb/Makefile ] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: musb: Kconfig: drop unnecessary dependenciesFelipe Balbi
those glues can build cleanly anywhere. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: musb: make davinci and da8xx glues depend on BROKENFelipe Balbi
those two glues are still including <mach/> headers and no active developement has been going on those glues for quite some time. Apparently, for da8xx glue, only initial commit 3ee076de (usb: musb: introduce DA8xx/OMAP-L1x glue layer) has been tested. All other patches seem to have been compile-tested only. For davinci glue layer, last real commit dates back from 2010, with commit f405387 (USB: MUSB: fix kernel WARNING/oops when unloading module in OTG mode). Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: musb: force PIO-only if we're building multiplatform kernelsFelipe Balbi
MUSB still needs lots of work on the DMA part if we want to enable multiple DMA engines on a multiplatform kernel. Meanwhile, we're forcing PIO-only so that we, at least, have a working driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-05usb: musb: remove all 'select' from KconfigFelipe Balbi
those are quite unnecessary, the only thing we need to be careful about is USB_OTG_UTILS which get properly selected by PHY drivers. For now, MUSB will select only USB_OTG_UTILS until we add stubs for the cases when PHY layer isn't enabled. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-04usb: musb: correct Kconfig in order to avoid non compilable selectionPeter Ujfalusi
Currently it is possible to have: USB_MUSB_OMAP2PLUS=m TWL4030_USB=y which would result compile time error due to missing symbols. With this change USB_MUSB_OMAP2PLUS and TWL4030_USB will be in sync. Reported-by: Vincent Stehle <v-stehle@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-02-08drivers/usb: add missing GENERIC_HARDIRQS dependenciesHeiko Carstens
Add a couple of missing GENERIC_HARDIRQS dependencies to fix link errors like below on s390: ERROR: "devm_request_threaded_irq" [drivers/usb/gadget/mv_udc.ko] undefined! Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25usb: start using the control module driverKishon Vijay Abraham I
Start using the control module driver for powering on the PHY and for writing to the mailbox instead of writing to the control module registers on their own. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11Merge tag 'musb-for-v3.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: musb: patches for v3.7 merge window Here we have a bunch of miscellaneous cleanups and fixes to the musb driver. It fixes a bunch of mistakes errors which nobody has triggered before, so I'm not Ccing stable tree. We are finally improving OMAP's VBUS/ID Mailbox usage so that we can introduce our PHY drivers properly. Also, we're adding support for multiple instances of the MUSB IP in the same SoC, as seen on some platforms from TI which have 2 MUSB instances. Other than that, we have some small fixes like not kicking DMA for a zero byte transfer, or properly handling NAK timeout on MUSB's host side, and the enabling of DMA Mode1 for any transfers which are aligned to wMaxPacketSize. All patches have been pending on mailing list for a long time and I don't expect any big surprises with this pull request.
2012-09-11Merge tag 'gadget-for-v3.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: gadget: patches for v3.7 merge window This pull request is large but the biggest part is the first part of the cleanup on the gadget framework so we have a saner setup to add configfs support for v3.8. We have also some more conversions to the new udc_start/udc_stop which makes us closer from dropping the old interfaces. USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED are finally gone, thanks to Michal for his awesome work. Other than that, we have the usual set of miscellaneous changes and cleanups involving improvements to debug messages, removal of duplicated includes, moving dereference after NULL test, making renesas_hsbhs' irq handler Shared, unused code being dropped, prevention of sleep-inside-spinlock bugs and a race condition fix on udc-core.
2012-08-31usb: gadget: get rid of USB_GADGET_{DUAL,SUPER}SPEEDMichal Nazarewicz
This commit removes USB_GADGET_DUALSPEED and USB_GADGET_SUPERSPEED Kconfig options. Since now kernel allows many UDC drivers to be compiled, those options may turn to no longer be valid. For instance, if someone decides to build UDC that supports super speed and UDC that supports high speed only, the latter will be "assumed" to support super speed since USB_GADGET_SUPERSPEED will be selected by the former. The test of whether CONFIG_USB_GADGET_*SPEED was defined was just an optimisation which removed otherwise dead code (ie. if UDC is not dual speed, there is no need to handle cases that can happen if speed is high). This commit removes those checks. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-20usb: musb: fix spelling of families in KconfigPeter Meerwald
Trivial patch fixin spelling of families in Kconfig [ balbi@ti.com : added the obvious commit log ] Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03usb: musb: Fix wrong config for am33xx and ti81xxAjay Kumar Gupta
Commit "bb6abcf: ARM: OMAP2+: Kconfig: convert SOC_OMAPAM33XX to SOC_AM33XX" and "3395955: ARM: OMAP2+: Kconfig: convert SOC_OMAPTI81XX to SOC_TI81XX" has changed the SOC config for AM33XX and TI81XX as shown below CONFIG_SOC_OMAPAM33XX --> CONFIG_SOC_AM33XX CONFIG_SOC_OMAPTI81XX --> CONFIG_SOC_TI81XX So updating the same at musb driver for AM33XX and TI81XX platforms. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04usb: musb: enable support for am335xAjay Kumar Gupta
Enabled the flag so that musb_dsps glue file can be used for am335x Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04usb: musb: Add support for ti81xx platformAjay Kumar Gupta
TI81XX platform has two musb interfaces and uses CPPI4.1 DMA engine. It has builtin USB PHYs as AM35x. The current set of patches adds support for one instance and only in PIO mode. [ balbi@ti.com : make it compile and solve a "may be used uninitialized" warning ] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: musb: cleanup kconfigFelipe Contreras
The whole thing depends on USB_MUSB_HDRC, just add an 'if'. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20usb: musb: trivial Kconfig cleanupsFelipe Contreras
Shuffle the code a bit so the description is at the top. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: drop ARCH dependencyFelipe Balbi
musb core driver and tusb6010 glue layer don't depend on anything which is ARCH-specific. It builds fine on x86 and ARM. Dropping the dependency so we can compile-test on linux-next. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: use a Kconfig choice to pick the right DMA methodArnd Bergmann
The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-11-14usb: musb: hdrc: fix dependency on USB_GADGET_DUALSPEED in KconfigLuciano Coelho
USB_MUSB_HDRC depends on USB_GADGET_DUALSPEED. If HDRC is selected but DUALSPEED is not, the kernel oopses: [ 3.132781] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 3.141296] pgd = c0004000 [ 3.144134] [00000000] *pgd=00000000 [ 3.147918] Internal error: Oops: 5 [#1] SMP [ 3.152404] Modules linked in: [ 3.155609] CPU: 0 Not tainted (3.1.0-rc9-wl+ #417) [ 3.161132] PC is at composite_setup+0x738/0xbb4 [ 3.165985] LR is at vprintk+0x400/0x47c [ 3.170135] pc : [<c031df90>] lr : [<c004c150>] psr: 60000093 [ 3.170135] sp : c065dd50 ip : dfb1f0fc fp : c065ddbc [ 3.182220] r10: 00000000 r9 : df8fcae8 r8 : df8fcaa0 [ 3.187713] r7 : 00000000 r6 : df8eaa20 r5 : dfae8ea0 r4 : 00000000 [ 3.194580] r3 : df8fcae8 r2 : 00010002 r1 : c065dc40 r0 : 00000047 [ 3.201446] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.209228] Control: 10c53c7d Table: 8000404a DAC: 00000015 [ 3.215270] Process swapper (pid: 0, stack limit = 0xc065c2f8) [ 3.221405] Stack: (0xc065dd50 to 0xc065e000) [...] [ 3.415405] [<c031df90>] (composite_setup+0x738/0xbb4) from [<c0310d18>] (musb_g_ep0_irq+0x9d0/0xaf8) [ 3.425109] [<c0310d18>] (musb_g_ep0_irq+0x9d0/0xaf8) from [<c030fb04>] (musb_interrupt+0xb48/0xc74) [ 3.434722] [<c030fb04>] (musb_interrupt+0xb48/0xc74) from [<c030fc98>] (generic_interrupt+0x68/0x80) [ 3.444458] [<c030fc98>] (generic_interrupt+0x68/0x80) from [<c0095204>] (handle_irq_event_percpu+0x9c/0x234) [ 3.454925] [<c0095204>] (handle_irq_event_percpu+0x9c/0x234) from [<c00953e8>] (handle_irq_event+0x4c/0x6c) [ 3.465270] [<c00953e8>] (handle_irq_event+0x4c/0x6c) from [<c0097e10>] (handle_fasteoi_irq+0xd8/0x110) [ 3.475158] [<c0097e10>] (handle_fasteoi_irq+0xd8/0x110) from [<c0094d2c>] (generic_handle_irq+0x34/0x3c) [ 3.485260] [<c0094d2c>] (generic_handle_irq+0x34/0x3c) from [<c0014ae4>] (handle_IRQ+0x88/0xc8) [ 3.494537] [<c0014ae4>] (handle_IRQ+0x88/0xc8) from [<c00085b0>] (asm_do_IRQ+0x18/0x1c) [ 3.503051] [<c00085b0>] (asm_do_IRQ+0x18/0x1c) from [<c0429e78>] (__irq_svc+0x38/0xc0) This patch changes Kconfig so that USB_GADGET_DUALSPEED is selected automatically by USB_MUSB_HDRC. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-14usb: musb: remove incorrectly added ARCH_U5500 defineMian Yousaf Kaukab
ARCH_U8500 covers both MACH_U8500 and MACH_U5500 Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-01usb: musb: fix KconfigRabin Vincent
After 622859634 (usb: musb: drop a gigantic amount of ifdeferry): - USB_GADGET_MUSB_HDRC is no longer selectable because it depends on the removed USB_MUSB_PERIPHERAL and USB_MUSB_OTG options - The Kconfig comment still says "Enable Host or Gadget support to see Inventra options", even though you now need to enable both of them to see Inventra options. Fix the dependency and drop the anyway unnecessary comment. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-01usb: musb: drop a gigantic amount of ifdeferryFelipe Balbi
the MUSB IP is always OTG, so there's no point in adding so many ifdefs on the code. Drop those and always compile the driver for OTG support. This also allows us to drop the useless "driver mode" choice. For doing that, we need to make musb depend on both Host and Peripheral side. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-18usb: musb: ux500: add configuration and build options for ux500 dmaMian Yousaf Kaukab
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: allow musb and glue layers to be modulesFelipe Balbi
This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: drop unneeded musb_debug trickeryFelipe Balbi
We have a generic way of enabling/disabling different debug messages on a driver called DYNAMIC_PRINTK. Anyone interested in enabling just part of the debug messages, please read the documentation under: Documentation/dynamic-debug-howto.txt for information on how to use that great infrastructure. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-04-13usb: musb: temporarily make it boolFelipe Balbi
Due to the recent changes to musb's glue layers, we can't compile musb-hdrc as a module - compilation will break due to undefined symbol musb_debug. In order to fix that, we need a big re-work of the debug support on the MUSB driver. Because that would mean a lot of new code coming into the -rc series, it's best to defer that to next merge window and for now just disable module support for MUSB. Once we get the refactor of the debugging support done, we can simply revert this patch and things will go back to normal again. Cc: stable@kernel.org # v2.6.38 Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: TWL6030: Selecting TWL6030_USB transceiverHema HK
Selecting the twl6030-usb for OMAP4430SDP and OMAP4PANDA boards and adding OMAP4 internal phy code for compilation Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: add support for ux500 platformMian Yousaf Kaukab
Initial support for u8500 and u5500 platform. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: trivial search and replace patchFelipe Balbi
change all ocurrences of musb_hdrc to musb-hdrc. We will call glue layer drivers musb-<glue layer>, so in order to keep things somewhat standard, let's change the underscore into a dash. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: add Kconfig options for each glue layerFelipe Balbi
This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-10-22USB: musb: add musb support for AM35xAjay Kumar Gupta
AM35x has musb interface and uses CPPI4.1 DMA engine. Current patch supports only PIO mode. DMA support can be added later once basic CPPI4.1 DMA patch is accepted. Also added USB_MUSB_AM35X which is required to differentiate musb ips between OMAP3x and AM35x. This config would be used to for below purposes, - Select am35x.c instead of omap2430.c for compilation at drivers/usb/musb directory. Please note there are significant differneces in these two files as musb ip in quite different on AM35x. Please note that in multi omap configuration only omap2430.c file will get compiled and we would require to select only AM35x based board config to compile am35x.c - Select workaround codes applicable for AM35x musb issues. one such workaround is for bytewise read issue on AM35x. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: musb: introduce DA8xx/OMAP-L1x glue layerSergei Shtylyov
Texas Instruments DA8xx/OMAP-L1x glue layer for the MUSBMHRDC driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Yadviga Grigorieva <yadviga@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: MUSB: Build MUSB driver for OMAP4Maulik Mankad
This patch updates the Makefile to build the MUSB driver for OMAP4. It also sets the Kconfig options for OMAP4. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: fix DaVinci glue layer dependencySergei Shtylyov
CONFIG_ARCH_DAVINCI now embraces both the "real" DaVinci and DA8xx/OMAP-L1x -- on which the DaVinci glue layer won't work. Change the Makefile dependency to CONFIG_ARCH_DAVINCI_DMx which corresponds to "real" DaVinci. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-15omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3Tony Lindgren
Replace ARCH_OMAP34XX with ARCH_OMAP3 Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11USB: musb: Blackfin code needs NOP_USB_XCEIV tooCliff Cai
Otherwise we get the link failure: drivers/built-in.o: In function 'musb_platform_init': drivers/usb/musb/blackfin.c:300: undefined reference to 'usb_nop_xceiv_register' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11USB: musb: update Blackfin processor dependencySonic Zhang
Do not allow MUSB driver to be selected on derivatives that don't have the MUSB controller on them. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit (git 2.34.1) at 2024-07-06 02:34:17 +0000