summaryrefslogtreecommitdiff
path: root/drivers/usb/usbip
AgeCommit message (Collapse)Author
2021-11-17usb: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Acked-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Peter Chen <peter.chen@kernel.or> # for chipidea part Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/563123a8117d6cafae3f134e497587bd2b8bb7f4.1636734453.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26usbip:vhci_hcd USB port can get stuck in the disabled stateShuah Khan
When a remote usb device is attached to the local Virtual USB Host Controller Root Hub port, the bound device driver may send a port reset command. vhci_hcd accepts port resets only when the device doesn't have port address assigned to it. When reset happens device is in assigned/used state and vhci_hcd rejects it leaving the port in a stuck state. This problem was found when a blue-tooth or xbox wireless dongle was passed through using usbip. A few drivers reset the port during probe including mt76 driver specific to this bug report. Fix the problem with a change to honor reset requests when device is in used state (VDEV_ST_USED). Reported-and-tested-by: Michael <msbroadf@gmail.com> Suggested-by: Michael <msbroadf@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26usbip: clean up code in vhci_device_unlink_cleanupAnirudh Rayabharam
The cleanup code for unlink_tx and unlink_rx lists is almost the same. So, extract it into a new function and call it for both unlink_rx and unlink_tx. Also, remove unnecessary log messages. Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20210820190122.16379-3-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-26usbip: give back URBs for unsent unlink requests during cleanupAnirudh Rayabharam
In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are not given back. This sometimes causes usb_kill_urb to wait indefinitely for that urb to be given back. syzbot has reported a hung task issue [1] for this. To fix this, give back the urbs corresponding to unsent unlink requests (unlink_tx list) similar to how urbs corresponding to unanswered unlink requests (unlink_rx list) are given back. [1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76 Reported-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com Tested-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20210820190122.16379-2-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28Merge tag 'sched-core-2021-04-28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: - Clean up SCHED_DEBUG: move the decades old mess of sysctl, procfs and debugfs interfaces to a unified debugfs interface. - Signals: Allow caching one sigqueue object per task, to improve performance & latencies. - Improve newidle_balance() irq-off latencies on systems with a large number of CPU cgroups. - Improve energy-aware scheduling - Improve the PELT metrics for certain workloads - Reintroduce select_idle_smt() to improve load-balancing locality - but without the previous regressions - Add 'scheduler latency debugging': warn after long periods of pending need_resched. This is an opt-in feature that requires the enabling of the LATENCY_WARN scheduler feature, or the use of the resched_latency_warn_ms=xx boot parameter. - CPU hotplug fixes for HP-rollback, and for the 'fail' interface. Fix remaining balance_push() vs. hotplug holes/races - PSI fixes, plus allow /proc/pressure/ files to be written by CAP_SYS_RESOURCE tasks as well - Fix/improve various load-balancing corner cases vs. capacity margins - Fix sched topology on systems with NUMA diameter of 3 or above - Fix PF_KTHREAD vs to_kthread() race - Minor rseq optimizations - Misc cleanups, optimizations, fixes and smaller updates * tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) cpumask/hotplug: Fix cpu_dying() state tracking kthread: Fix PF_KTHREAD vs to_kthread() race sched/debug: Fix cgroup_path[] serialization sched,psi: Handle potential task count underflow bugs more gracefully sched: Warn on long periods of pending need_resched sched/fair: Move update_nohz_stats() to the CONFIG_NO_HZ_COMMON block to simplify the code & fix an unused function warning sched/debug: Rename the sched_debug parameter to sched_verbose sched,fair: Alternative sched_slice() sched: Move /proc/sched_debug to debugfs sched,debug: Convert sysctl sched_domains to debugfs debugfs: Implement debugfs_create_str() sched,preempt: Move preempt_dynamic to debug.c sched: Move SCHED_DEBUG sysctl to debugfs sched: Don't make LATENCYTOP select SCHED_DEBUG sched: Remove sched_schedstats sysctl out from under SCHED_DEBUG sched/numa: Allow runtime enabling/disabling of NUMA balance without SCHED_DEBUG sched: Use cpu_dying() to fix balance_push vs hotplug-rollback cpumask: Introduce DYING mask cpumask: Make cpu_{online,possible,present,active}() inline rseq: Optimise rseq_get_rseq_cs() and clear_rseq_cs() ...
2021-04-20Merge tag 'v5.12-rc8' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-04-12usbip: vudc: fix missing unlock on error in usbip_sockfd_store()Ye Bin
Add the missing unlock before return from function usbip_sockfd_store() in the error handling case. Fixes: bd8b82042269 ("usbip: vudc synchronize sysfs code paths") Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210408112305.1022247-1-yebin10@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: synchronize event handler with sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to synchronize event handler with sysfs paths in usbip drivers. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/c5c8723d3f29dfe3d759cfaafa7dd16b0dfe2918.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: vudc synchronize sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in vudc. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/caabcf3fc87bdae970509b5ff32d05bb7ce2fb15.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: stub-dev synchronize sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. Use sysfs_lock to protect sysfs paths in stub-dev. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/2b182f3561b4a065bf3bf6dce3b0e9944ba17b3f.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05usbip: add sysfs_lock to synchronize sysfs code pathsShuah Khan
Fuzzing uncovered race condition between sysfs code paths in usbip drivers. Device connect/disconnect code paths initiated through sysfs interface are prone to races if disconnect happens during connect and vice versa. This problem is common to all drivers while it can be reproduced easily in vhci_hcd. Add a sysfs_lock to usbip_device struct to protect the paths. Use this in vhci_hcd to protect sysfs paths. For a complete fix, usip_host and usip-vudc drivers and the event handler will have to use this lock to protect the paths. These changes will be done in subsequent patches. Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/b6568f7beae702bbc236a545d3c020106ca75eac.1616807117.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-26usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()Shuah Khan
Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling. UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42 shift exponent 768 is too large for 32-bit type 'int' Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17usbip: Fix incorrect double assignment to udc->ud.tcp_rxColin Ian King
Currently udc->ud.tcp_rx is being assigned twice, the second assignment is incorrect, it should be to udc->ud.tcp_tx instead of rx. Fix this. Fixes: 46613c9dfa96 ("usbip: fix vudc usbip_sockfd_store races leading to gpf") Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210311104445.7811-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usbip: fix vudc usbip_sockfd_store races leading to gpfShuah Khan
usbip_sockfd_store() is invoked when user requests attach (import) detach (unimport) usb gadget device from usbip host. vhci_hcd sends import request and usbip_sockfd_store() exports the device if it is free for export. Export and unexport are governed by local state and shared state - Shared state (usbip device status, sockfd) - sockfd and Device status are used to determine if stub should be brought up or shut down. Device status is shared between host and client. - Local state (tcp_socket, rx and tx thread task_struct ptrs) A valid tcp_socket controls rx and tx thread operations while the device is in exported state. - While the device is exported, device status is marked used and socket, sockfd, and thread pointers are valid. Export sequence (stub-up) includes validating the socket and creating receive (rx) and transmit (tx) threads to talk to the client to provide access to the exported device. rx and tx threads depends on local and shared state to be correct and in sync. Unexport (stub-down) sequence shuts the socket down and stops the rx and tx threads. Stub-down sequence relies on local and shared states to be in sync. There are races in updating the local and shared status in the current stub-up sequence resulting in crashes. These stem from starting rx and tx threads before local and global state is updated correctly to be in sync. 1. Doesn't handle kthread_create() error and saves invalid ptr in local state that drives rx and tx threads. 2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads before updating usbip_device status to SDEV_ST_USED. This opens up a race condition between the threads and usbip_sockfd_store() stub up and down handling. Fix the above problems: - Stop using kthread_get_run() macro to create/start threads. - Create threads and get task struct reference. - Add kthread_create() failure handling and bail out. - Hold usbip_device lock to update local and shared states after creating rx and tx threads. - Update usbip_device status to SDEV_ST_USED. - Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx - Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx, and status) is complete. Credit goes to syzbot and Tetsuo Handa for finding and root-causing the kthread_get_run() improper error handling problem and others. This is a hard problem to find and debug since the races aren't seen in a normal case. Fuzzing forces the race window to be small enough for the kthread_get_run() error path bug and starting threads before updating the local and shared state bug in the stub-up sequence. Fixes: 9720b4bc76a83807 ("staging/usbip: convert to kthread") Cc: stable@vger.kernel.org Reported-by: syzbot <syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+bf1a360e305ee719e364@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+95ce4b142579611ef0a9@syzkaller.appspotmail.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/b1c08b983ffa185449c9f0f7d1021dc8c8454b60.1615171203.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usbip: fix vhci_hcd attach_store() races leading to gpfShuah Khan
attach_store() is invoked when user requests import (attach) a device from usbip host. Attach and detach are governed by local state and shared state - Shared state (usbip device status) - Device status is used to manage the attach and detach operations on import-able devices. - Local state (tcp_socket, rx and tx thread task_struct ptrs) A valid tcp_socket controls rx and tx thread operations while the device is in exported state. - Device has to be in the right state to be attached and detached. Attach sequence includes validating the socket and creating receive (rx) and transmit (tx) threads to talk to the host to get access to the imported device. rx and tx threads depends on local and shared state to be correct and in sync. Detach sequence shuts the socket down and stops the rx and tx threads. Detach sequence relies on local and shared states to be in sync. There are races in updating the local and shared status in the current attach sequence resulting in crashes. These stem from starting rx and tx threads before local and global state is updated correctly to be in sync. 1. Doesn't handle kthread_create() error and saves invalid ptr in local state that drives rx and tx threads. 2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads before updating usbip_device status to VDEV_ST_NOTASSIGNED. This opens up a race condition between the threads, port connect, and detach handling. Fix the above problems: - Stop using kthread_get_run() macro to create/start threads. - Create threads and get task struct reference. - Add kthread_create() failure handling and bail out. - Hold vhci and usbip_device locks to update local and shared states after creating rx and tx threads. - Update usbip_device status to VDEV_ST_NOTASSIGNED. - Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx - Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx, and status) is complete. Credit goes to syzbot and Tetsuo Handa for finding and root-causing the kthread_get_run() improper error handling problem and others. This is hard problem to find and debug since the races aren't seen in a normal case. Fuzzing forces the race window to be small enough for the kthread_get_run() error path bug and starting threads before updating the local and shared state bug in the attach sequence. - Update usbip_device tcp_rx and tcp_tx pointers holding vhci and usbip_device locks. Tested with syzbot reproducer: - https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000 Fixes: 9720b4bc76a83807 ("staging/usbip: convert to kthread") Cc: stable@vger.kernel.org Reported-by: syzbot <syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+bf1a360e305ee719e364@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+95ce4b142579611ef0a9@syzkaller.appspotmail.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/bb434bd5d7a64fbec38b5ecfb838a6baef6eb12b.1615171203.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usbip: fix stub_dev usbip_sockfd_store() races leading to gpfShuah Khan
usbip_sockfd_store() is invoked when user requests attach (import) detach (unimport) usb device from usbip host. vhci_hcd sends import request and usbip_sockfd_store() exports the device if it is free for export. Export and unexport are governed by local state and shared state - Shared state (usbip device status, sockfd) - sockfd and Device status are used to determine if stub should be brought up or shut down. - Local state (tcp_socket, rx and tx thread task_struct ptrs) A valid tcp_socket controls rx and tx thread operations while the device is in exported state. - While the device is exported, device status is marked used and socket, sockfd, and thread pointers are valid. Export sequence (stub-up) includes validating the socket and creating receive (rx) and transmit (tx) threads to talk to the client to provide access to the exported device. rx and tx threads depends on local and shared state to be correct and in sync. Unexport (stub-down) sequence shuts the socket down and stops the rx and tx threads. Stub-down sequence relies on local and shared states to be in sync. There are races in updating the local and shared status in the current stub-up sequence resulting in crashes. These stem from starting rx and tx threads before local and global state is updated correctly to be in sync. 1. Doesn't handle kthread_create() error and saves invalid ptr in local state that drives rx and tx threads. 2. Updates tcp_socket and sockfd, starts stub_rx and stub_tx threads before updating usbip_device status to SDEV_ST_USED. This opens up a race condition between the threads and usbip_sockfd_store() stub up and down handling. Fix the above problems: - Stop using kthread_get_run() macro to create/start threads. - Create threads and get task struct reference. - Add kthread_create() failure handling and bail out. - Hold usbip_device lock to update local and shared states after creating rx and tx threads. - Update usbip_device status to SDEV_ST_USED. - Update usbip_device tcp_socket, sockfd, tcp_rx, and tcp_tx - Start threads after usbip_device (tcp_socket, sockfd, tcp_rx, tcp_tx, and status) is complete. Credit goes to syzbot and Tetsuo Handa for finding and root-causing the kthread_get_run() improper error handling problem and others. This is a hard problem to find and debug since the races aren't seen in a normal case. Fuzzing forces the race window to be small enough for the kthread_get_run() error path bug and starting threads before updating the local and shared state bug in the stub-up sequence. Tested with syzbot reproducer: - https://syzkaller.appspot.com/text?tag=ReproC&x=14801034d00000 Fixes: 9720b4bc76a83807 ("staging/usbip: convert to kthread") Cc: stable@vger.kernel.org Reported-by: syzbot <syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+bf1a360e305ee719e364@syzkaller.appspotmail.com> Reported-by: syzbot <syzbot+95ce4b142579611ef0a9@syzkaller.appspotmail.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/268a0668144d5ff36ec7d87fdfa90faf583b7ccc.1615171203.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usbip: fix vudc to check for stream socketShuah Khan
Fix usbip_sockfd_store() to validate the passed in file descriptor is a stream socket. If the file descriptor passed was a SOCK_DGRAM socket, sock_recvmsg() can't detect end of stream. Cc: stable@vger.kernel.org Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/387a670316002324113ac7ea1e8b53f4085d0c95.1615171203.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usbip: fix vhci_hcd to check for stream socketShuah Khan
Fix attach_store() to validate the passed in file descriptor is a stream socket. If the file descriptor passed was a SOCK_DGRAM socket, sock_recvmsg() can't detect end of stream. Cc: stable@vger.kernel.org Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/52712aa308915bda02cece1589e04ee8b401d1f3.1615171203.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10usbip: fix stub_dev to check for stream socketShuah Khan
Fix usbip_sockfd_store() to validate the passed in file descriptor is a stream socket. If the file descriptor passed was a SOCK_DGRAM socket, sock_recvmsg() can't detect end of stream. Cc: stable@vger.kernel.org Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/e942d2bd03afb8e8552bd2a5d84e18d17670d521.1615171203.git.skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-06kcov: Remove kcov include from sched.h and move it to its users.Sebastian Andrzej Siewior
The recent addition of in_serving_softirq() to kconv.h results in compile failure on PREEMPT_RT because it requires task_struct::softirq_disable_cnt. This is not available if kconv.h is included from sched.h. It is not needed to include kconv.h from sched.h. All but the net/ user already include the kconv header file. Move the include of the kconv.h header from sched.h it its users. Additionally include sched.h from kconv.h to ensure that everything task_struct related is available. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lkml.kernel.org/r/20210218173124.iy5iyqv3a4oia4vv@linutronix.de
2021-01-11Merge 5.11-rc3 into usb-nextGreg Kroah-Hartman
Resolves a merge issue in: drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07usb: usbip: Use DEFINE_SPINLOCK() for spinlockZheng Yongjun
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201223141431.835-1-zhengyongjun3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04usb: usbip: vhci_hcd: protect shift sizeRandy Dunlap
Fix shift out-of-bounds in vhci_hcd.c: UBSAN: shift-out-of-bounds in ../drivers/usb/usbip/vhci_hcd.c:399:41 shift exponent 768 is too large for 32-bit type 'int' Fixes: 03cd00d538a6 ("usbip: vhci-hcd: Set the vhci structure up to work") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: syzbot+297d20e437b79283bf6d@syzkaller.appspotmail.com Cc: Yuyang Du <yuyang.du@intel.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201229071309.18418-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-28kcov, usbip: collect coverage from vhci_rx_loopNazime Hande Harputluoglu
Add kcov_remote_start()/kcov_remote_stop() annotations to the vhci_rx_loop() function, which is responsible for parsing USB/IP packets coming into USB/IP client. Since vhci_rx_loop() threads are spawned per vhci_hcd device instance, the common kcov handle is used for kcov_remote_start()/stop() annotations (see Documentation/dev-tools/kcov.rst for details). As the result kcov can now be used to collect coverage from vhci_rx_loop() threads. Co-developed-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Nazime Hande Harputluoglu <handeharputlu@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/f8114050f8d65aa0bc801318b1db532d9f432447.1606175386.git.andreyknvl@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usbip: Remove in_interrupt() checkAhmed S. Darwish
The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. usbip_recv() uses in_interrupt() to conditionally print context information for debugging messages. The value is zero as the function is only called from various *_rx_loop() kthread functions. Remove it. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20201019101110.332963099@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabledShuah Khan
kcov testing uncovered call to usb_hcd_giveback_urb() without disabling interrupts. Link: https://lore.kernel.org/linux-usb/CAAeHK+wb4k-LGTjK9F5YbJNviF_+yU+wE_=Vpo9Rn7KFN8vG6Q@mail.gmail.com/ usb_hcd_giveback_urb() is called from vhci's urb_enqueue, when it determines it doesn't need to xmit the urb and can give it back. This path runs in task context. Disable irqs around usb_hcd_giveback_urb() call. Reported-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20201006223914.39257-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05Merge 5.9-rc8 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-25Revert "usbip: Implement a match function to fix usbip"M. Vefa Bicakci
This commit reverts commit 7a2f2974f265 ("usbip: Implement a match function to fix usbip"). In summary, commit d5643d2249b2 ("USB: Fix device driver race") inadvertently broke usbip functionality, which I resolved in an incorrect manner by introducing a match function to usbip, usbip_match(), that unconditionally returns true. However, the usbip_match function, as is, causes usbip to take over virtual devices used by syzkaller for USB fuzzing, which is a regression reported by Andrey Konovalov. Furthermore, in conjunction with the fix of another bug, handled by another patch titled "usbcore/driver: Fix specific driver selection" in this patch set, the usbip_match function causes unexpected USB subsystem behaviour when the usbip_host driver is loaded. The unexpected behaviour can be qualified as follows: - If commit 41160802ab8e ("USB: Simplify USB ID table match") is included in the kernel, then all USB devices are bound to the usbip_host driver, which appears to the user as if all USB devices were disconnected. - If the same commit (41160802ab8e) is not in the kernel (as is the case with v5.8.10) then all USB devices are re-probed and re-bound to their original device drivers, which appears to the user as a disconnection and re-connection of USB devices. Please note that this commit will make usbip non-operational again, until yet another patch in this patch set is merged, titled "usbcore/driver: Accommodate usbip". Cc: <stable@vger.kernel.org> # 5.8: 41160802ab8e: USB: Simplify USB ID table match Cc: <stable@vger.kernel.org> # 5.8 Cc: Bastien Nocera <hadess@hadess.net> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <syzkaller@googlegroups.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Link: https://lore.kernel.org/r/20200922110703.720960-2-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16usbip: simplify the return expression of usbip_core_init()Liu Shixin
Simplify the return expression. Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20200915032631.1772673-1-liushixin2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18usbip: Implement a match function to fix usbipM. Vefa Bicakci
Commit 88b7381a939d ("USB: Select better matching USB drivers when available") introduced the use of a "match" function to select a non-generic/better driver for a particular USB device. This unfortunately breaks the operation of usbip in general, as reported in the kernel bugzilla with bug 208267 (linked below). Upon inspecting the aforementioned commit, one can observe that the original code in the usb_device_match function used to return 1 unconditionally, but the aforementioned commit makes the usb_device_match function use identifier tables and "match" virtual functions, if either of them are available. Hence, this commit implements a match function for usbip that unconditionally returns true to ensure that usbip is functional again. This change has been verified to restore usbip functionality, with a v5.7.y kernel on an up-to-date version of Qubes OS 4.0, which uses usbip to redirect USB devices between VMs. Thanks to Jonathan Dieter for the effort in bisecting this issue down to the aforementioned commit. Fixes: 88b7381a939d ("USB: Select better matching USB drivers when available") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208267 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1856443 Link: https://github.com/QubesOS/qubes-issues/issues/5905 Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Cc: <stable@vger.kernel.org> # 5.7 Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Bastien Nocera <hadess@hadess.net> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200810160017.46002-1-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09usbip: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200707195214.GA3932@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-17usbip: Fix error path of vhci_recv_ret_submit()Suwan Kim
If a transaction error happens in vhci_recv_ret_submit(), event handler closes connection and changes port status to kick hub_event. Then hub tries to flush the endpoint URBs, but that causes infinite loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because "vhci_priv" in vhci_urb_dequeue() was already released by vhci_recv_ret_submit() before a transmission error occurred. Thus, vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint() continuously calls vhci_urb_dequeue(). The root cause of this issue is that vhci_recv_ret_submit() terminates early without giving back URB when transaction error occurs in vhci_recv_ret_submit(). That causes the error URB to still be linked at endpoint list without “vhci_priv". So, in the case of transaction error in vhci_recv_ret_submit(), unlink URB from the endpoint, insert proper error code in urb->status and give back URB. Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17usbip: Fix receive error in vhci-hcd when using scatter-gatherSuwan Kim
When vhci uses SG and receives data whose size is smaller than SG buffer size, it tries to receive more data even if it acutally receives all the data from the server. If then, it erroneously adds error event and triggers connection shutdown. vhci-hcd should check if it received all the data even if there are more SG entries left. So, check if it receivces all the data from the server in for_each_sg() loop. Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191213023055.19933-2-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-13usbip: Fix uninitialized symbol 'nents' in stub_recv_cmd_submit()Suwan Kim
Smatch reported that nents is not initialized and used in stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc() and used to allocate multiple URBs when host controller doesn't support scatter-gather DMA. The use of uninitialized nents means that buf_len is zero and use_sg is true. But buffer length should not be zero when an URB uses scatter-gather DMA. To prevent this situation, add the conditional that checks buf_len and use_sg. And move the use of nents right after the sgl_alloc() to avoid the use of uninitialized nents. If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be released by stub event handler and connection will be shut down. Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111141035.27788-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-12USBIP: add config dependency for SGL_ALLOCOliver Neukum
USBIP uses lib/scatterlist.h Hence it needs to set CONFIG_SGL_ALLOC Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191112154939.21217-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-04Merge 5.4-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-28usbip: Fix free of unallocated memory in vhci txSuwan Kim
iso_buffer should be set to NULL after use and free in the while loop. In the case of isochronous URB in the while loop, iso_buffer is allocated and after sending it to server, buffer is deallocated. And then, if the next URB in the while loop is not a isochronous pipe, iso_buffer still holds the previously deallocated buffer address and kfree tries to free wrong buffer address. Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Reviewed-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20191022093017.8027-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-14Merge 5.4-rc3 into usb-nextGreg Kroah-Hartman
we want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usbip: clean up an indentation issueColin Ian King
There is a return statement that is indented incorrectly, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190927092000.19373-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-04usbip: vhci_hcd indicate failed messageMao Wenan
If the return value of vhci_init_attr_group and sysfs_create_group is non-zero, which mean they failed to init attr_group and create sysfs group, so it would better add 'failed' message to indicate that. This patch also change pr_err to dev_err to trace which device is failed. Fixes: 0775a9cbc694 ("usbip: vhci extension: modifications to vhci driver") Signed-off-by: Mao Wenan <maowenan@huawei.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20190916150921.152977-1-maowenan@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-03usbip: Implement SG support to vhci-hcd and stub driverSuwan Kim
There are bugs on vhci with usb 3.0 storage device. In USB, each SG list entry buffer should be divisible by the bulk max packet size. But with native SG support, this problem doesn't matter because the SG buffer is treated as contiguous buffer. But without native SG support, USB storage driver breaks SG list into several URBs and the error occurs because of a buffer size of URB that cannot be divided by the bulk max packet size. The error situation is as follows. When USB Storage driver requests 31.5 KB data and has SG list which has 3584 bytes buffer followed by 7 4096 bytes buffer for some reason. USB Storage driver splits this SG list into several URBs because VHCI doesn't support SG and sends them separately. So the first URB buffer size is 3584 bytes. When receiving data from device, USB 3.0 device sends data packet of 1024 bytes size because the max packet size of BULK pipe is 1024 bytes. So device sends 4096 bytes. But the first URB buffer has only 3584 bytes buffer size. So host controller terminates the transfer even though there is more data to receive. So, vhci needs to support SG transfer to prevent this error. In this patch, vhci supports SG regardless of whether the server's host controller supports SG or not, because stub driver splits SG list into several URBs if the server's host controller doesn't support SG. To support SG, vhci sets URB_DMA_MAP_SG flag in urb->transfer_flags if URB has SG list and this flag will tell stub driver to use SG list. After receiving urb from stub driver, vhci clear URB_DMA_MAP_SG flag to avoid unnecessary DMA unmapping in HCD. vhci sends each SG list entry to stub driver. Then, stub driver sees the total length of the buffer and allocates SG table and pages according to the total buffer length calling sgl_alloc(). After stub driver receives completed URB, it again sends each SG list entry to vhci. If the server's host controller doesn't support SG, stub driver breaks a single SG request into several URBs and submits them to the server's host controller. When all the split URBs are completed, stub driver reassembles the URBs into a single return command and sends it to vhci. Moreover, in the situation where vhci supports SG, but stub driver does not, or vice versa, usbip works normally. Because there is no protocol modification, there is no problem in communication between server and client even if the one has a kernel without SG support. In the case of vhci supports SG and stub driver doesn't, because vhci sends only the total length of the buffer to stub driver as it did before the patch applied, stub driver only needs to allocate the required length of buffers using only kmalloc() regardless of whether vhci supports SG or not. But stub driver has to allocate buffer with kmalloc() as much as the total length of SG buffer which is quite huge when vhci sends SG request, so it has overhead in buffer allocation in this situation. If stub driver needs to send data buffer to vhci because of IN pipe, stub driver also sends only total length of buffer as metadata and then sends real data as vhci does. Then vhci receive data from stub driver and store it to the corresponding buffer of SG list entry. And for the case of stub driver supports SG and vhci doesn't, since the USB storage driver checks that vhci doesn't support SG and sends the request to stub driver by splitting the SG list into multiple URBs, stub driver allocates a buffer for each URB with kmalloc() as it did before this patch. * Test environment Test uses two difference machines and two different kernel version to make mismatch situation between the client and the server where vhci supports SG, but stub driver does not, or vice versa. All tests are conducted in both full SG support that both vhci and stub support SG and half SG support that is the mismatch situation. Test kernel version is 5.3-rc6 with commit "usb: add a HCD_DMA flag instead of guestimating DMA capabilities" to avoid unnecessary DMA mapping and unmapping. - Test kernel version - 5.3-rc6 with SG support - 5.1.20-200.fc29.x86_64 without SG support * SG support test - Test devices - Super-speed storage device - SanDisk Ultra USB 3.0 - High-speed storage device - SMI corporation USB 2.0 flash drive - Test description Test read and write operation of mass storage device that uses the BULK transfer. In test, the client reads and writes files whose size is over 1G and it works normally. * Regression test - Test devices - Super-speed device - Logitech Brio webcam - High-speed device - Logitech C920 HD Pro webcam - Full-speed device - Logitech bluetooth mouse - Britz BR-Orion speaker - Low-speed device - Logitech wired mouse - Test description Moving and click test for mouse. To test the webcam, use gnome-cheese. To test the speaker, play music and video on the client. All works normally. * VUDC compatibility test VUDC also works well with this patch. Tests are done with two USB gadget created by CONFIGFS USB gadget. Both use the BULK pipe. 1. Serial gadget 2. Mass storage gadget - Serial gadget test Serial gadget on the host sends and receives data using cat command on the /dev/ttyGS<N>. The client uses minicom to communicate with the serial gadget. - Mass storage gadget test After connecting the gadget with vhci, use "dd" to test read and write operation on the client side. Read - dd if=/dev/sd<N> iflag=direct of=/dev/null bs=1G count=1 Write - dd if=<my file path> iflag=direct of=/dev/sd<N> bs=1G count=1 Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20190828032741.12234-1-suwan.kim027@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-09USB: usbip: convert to use dev_groupsGreg Kroah-Hartman
USB drivers now support the ability for the driver core to handle the creation and removal of device-specific sysfs files in a race-free manner. Take advantage of that by converting the driver to use this by moving the sysfs attributes into a group and assigning the dev_groups pointer to it. Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Link: https://lore.kernel.org/r/20190806144502.17792-13-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-06USB: usbip: convert platform driver to use dev_groupsGreg Kroah-Hartman
Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" any sysfs files. Cc: Valentina Manea <valentina.manea.m@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20190805193636.25560-5-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05usbip: Replace unused kvec array with single variable in vhci_send_cmd_unlink()Suwan Kim
vhci_send_cmd_unlink() declears kvec array of size 3 but it actually uses just one element of the array. So, remove kvec array and replace it with single kvec variable. Signed-off-by: Suwan Kim <suwan.kim027@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03Merge 5.2-rc3 into usb-nextGreg Kroah-Hartman
we want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29usbip: usbip_host: fix stub_dev lock context imbalance regressionShuah Khan
Fix the following sparse context imbalance regression introduced in a patch that fixed sleeping function called from invalid context bug. kbuild test robot reported on: tree/branch: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-linus Regressions in current branch: drivers/usb/usbip/stub_dev.c:399:9: sparse: sparse: context imbalance in 'stub_probe' - different lock contexts for basic block drivers/usb/usbip/stub_dev.c:418:13: sparse: sparse: context imbalance in 'stub_disconnect' - different lock contexts for basic block drivers/usb/usbip/stub_dev.c:464:1-10: second lock on line 476 Error ids grouped by kconfigs: recent_errors ├── i386-allmodconfig │ └── drivers-usb-usbip-stub_dev.c:second-lock-on-line ├── x86_64-allmodconfig │ ├── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_disconnect-different-lock-contexts-for-basic-block │ └── drivers-usb-usbip-stub_dev.c:sparse:sparse:context-imbalance-in-stub_probe-different-lock-contexts-for-basic-block └── x86_64-allyesconfig └── drivers-usb-usbip-stub_dev.c:second-lock-on-line This is a real problem in an error leg where spin_lock() is called on an already held lock. Fix the imbalance in stub_probe() and stub_disconnect(). Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Fixes: 0c9e8b3cad65 ("usbip: usbip_host: fix BUG: sleeping function called from invalid context") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21usbip: usbip_host: fix BUG: sleeping function called from invalid contextShuah Khan
stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ #40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21usbip: usbip_host: cleanup do_rebind() return pathShuah Khan
Cleanup do_rebind() return path and use common return path. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08Merge tag 'usb-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...
generated by cgit (git 2.34.1) at 2024-05-27 06:57:59 +0000