summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2019-03-29Merge tag 'usb-serial-5.1-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.1-rc3 Here's a fix for a long-standing refcount issue in the mos7720 parport implementation, and a set of device id updates. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.1-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Olicard 600 USB: serial: cp210x: add new device id USB: serial: mos7720: fix mos_parport refcount imbalance on error path USB: serial: option: set driver_info for SIM5218 and compatibles USB: serial: ftdi_sio: add additional NovaTech products USB: serial: option: add support for Quectel EM12
2019-03-29Merge tag 'fixes-for-v5.1-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v5.1-rc2 One deadlock fix on f_hid. NET2280 got a fix on its dequeue implementation and a fix for overrun of OUT messages. DWC3 learned about another Intel product: Comment Lake PCH. NET2272 got a similar fix to NET2280 on its dequeue implementation. * tag 'fixes-for-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: USB: gadget: f_hid: fix deadlock in f_hidg_write() usb: gadget: net2272: Fix net2272_dequeue() usb: gadget: net2280: Fix net2280_dequeue() usb: gadget: net2280: Fix overrun of OUT messages usb: dwc3: pci: add support for Comet Lake PCH ID
2019-03-28USB: serial: option: add Olicard 600Bjørn Mork
This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> [ johan: use tabs to align comments in adjacent lines ] Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-28USB: serial: cp210x: add new device idGreg Kroah-Hartman
Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by Silicon-Labs for the devices from this vendor. Reported-by: Uli <t9cpu@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-28usb: u132-hcd: fix resource leakMukesh Ojha
if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28usb: cdc-acm: fix race during wakeup blocking TX trafficRomain Izard
When the kernel is compiled with preemption enabled, the URB completion handler can run in parallel with the work responsible for waking up the tty layer. If the URB handler sets the EVENT_TTY_WAKEUP bit during the call to tty_port_tty_wakeup() to signal that there is room for additional input, it will be cleared at the end of this call. As a result, TX traffic on the upper layer will be blocked. This can be seen with a kernel configured with CONFIG_PREEMPT, and a fast modem connected with PPP running over a USB CDC-ACM port. Use test_and_clear_bit() instead, which ensures that each wakeup requested by the URB completion code will trigger a call to tty_port_tty_wakeup(). Fixes: 1aba579f3cf5 cdc-acm: handle read pipe errors Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: mtu3: fix EXTCON dependencyArnd Bergmann
When EXTCON is a loadable module, mtu3 fails to link as built-in: drivers/usb/mtu3/mtu3_plat.o: In function `mtu3_probe': mtu3_plat.c:(.text+0x690): undefined reference to `extcon_get_edev_by_phandle' Add a Kconfig dependency to force mtu3 also to be a loadable module if extconn is, but still allow it to be built without extcon. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: usb251xb: fix to avoid potential NULL pointer dereferenceAditya Pakki
of_match_device in usb251xb_probe can fail and returns a NULL pointer. The patch avoids a potential NULL pointer dereference in this scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-26usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode failsChen-Yu Tsai
Some PHYs do not support PHY_MODE_USB_HOST_SS, i.e. USB 3.0 or higher. Fall back and try the more generic PHY_MODE_USB_HOST if it fails. Fixes: b97a31348379 ("usb: core: comply to PHY framework") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22xhci: Don't let USB3 ports stuck in polling state prevent suspendMathias Nyman
Commit 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") was intended to prevent ports that were still link training from being forced to U3 suspend state mid enumeration. This solved enumeration issues for devices with slow link training. Turns out some devices are stuck in the link training/polling state, and thus that patch will prevent suspend completely for these devices. This is seen with USB3 card readers in some MacBooks. Instead of preventing suspend, give some time to complete the link training. On successful training the port will end up as connected and enabled. If port instead is stuck in link training the bus suspend will continue suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout). Original patch was sent to stable, this one should go there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22usb: xhci: dbc: Don't free all memory with spinlock heldMathias Nyman
The xhci debug capability (DbC) feature did its memory cleanup with spinlock held. dma_free_coherent() warns if called with interrupts disabled move the memory cleanup outside the spinlock Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22xhci: Fix port resume done detection for SS ports with LPM enabledMathias Nyman
A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status. Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake. Add U1 and U2 to the possible link states when checking for finished port resume. Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-20USB: serial: mos7720: fix mos_parport refcount imbalance on error pathLin Yi
The write_parport_reg_nonblock() helper takes a reference to the struct mos_parport, but failed to release it in a couple of error paths after allocation failures, leading to a memory leak. Johan said that move the kref_get() and mos_parport assignment to the end of urbtrack initialisation is a better way, so move it. and mos_parport do not used until urbtrack initialisation. Signed-off-by: Lin Yi <teroincn@163.com> Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-20USB: gadget: f_hid: fix deadlock in f_hidg_write()Radoslav Gerganov
In f_hidg_write() the write_spinlock is acquired before calling usb_ep_queue() which causes a deadlock when dummy_hcd is being used. This is because dummy_queue() callbacks into f_hidg_req_complete() which tries to acquire the same spinlock. This is (part of) the backtrace when the deadlock occurs: 0xffffffffc06b1410 in f_hidg_req_complete 0xffffffffc06a590a in usb_gadget_giveback_request 0xffffffffc06cfff2 in dummy_queue 0xffffffffc06a4b96 in usb_ep_queue 0xffffffffc06b1eb6 in f_hidg_write 0xffffffff8127730b in __vfs_write 0xffffffff812774d1 in vfs_write 0xffffffff81277725 in SYSC_write Fix this by releasing the write_spinlock before calling usb_ep_queue() Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org # 4.11+ Fixes: 749494b6bdbb ("usb: gadget: f_hid: fix: Move IN request allocation to set_alt()") Signed-off-by: Radoslav Gerganov <rgerganov@vmware.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20usb: gadget: net2272: Fix net2272_dequeue()Guido Kiener
Restore the status of ep->stopped in function net2272_dequeue(). When the given request is not found in the endpoint queue the function returns -EINVAL without restoring the state of ep->stopped. Thus the endpoint keeps blocked and does not transfer any data anymore. This fix is only compile-tested, since we do not have a corresponding hardware. An analogous fix was tested in the sibling driver. See "usb: gadget: net2280: Fix net2280_dequeue()" Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20usb: gadget: net2280: Fix net2280_dequeue()Guido Kiener
When a request must be dequeued with net2280_dequeue() e.g. due to a device clear action and the same request is finished by the function scan_dma_completions() then the function net2280_dequeue() does not find the request in the following search loop and returns the error -EINVAL without restoring the status ep->stopped. Thus the endpoint keeps blocked and does not receive any data anymore. This fix restores the status and does not issue an error message. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20usb: gadget: net2280: Fix overrun of OUT messagesGuido Kiener
The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size. The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets. With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-20usb: dwc3: pci: add support for Comet Lake PCH IDFelipe Balbi
This patch simply adds a new PCI Device ID Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-03-19usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0Gustavo A. R. Silva
There is no need to compare *port* with >= 0 because such comparison of an unsigned value is always true. Fix this by removing such comparison. Addresses-Coverity-ID: 1443949 ("Unsigned compared against 0") Fixes: 02a50b875046 ("usb: usb251xb: add usb data lane port swap feature") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19usb: common: Consider only available nodes for dr_modeFabrizio Castro
There are cases where multiple device tree nodes point to the same phy node by means of the "phys" property, but we should only consider those nodes that are marked as available rather than just any node. Fixes: 98bfb3946695 ("usb: of: add an api to get dr_mode by the phy node") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-capsHans de Goede
PD 2.0 sinks are supposed to accept src-capabilities with a 3.0 header and simply ignore any src PDOs which the sink does not understand such as PPS but some 2.0 sinks instead ignore the entire PD_DATA_SOURCE_CAP message, causing contract negotiation to fail. This commit fixes such sinks not working by re-trying the contract negotiation with PD-2.0 source-caps messages if we don't have a contract after PD_N_HARD_RESET_COUNT hard-reset attempts. The problem fixed by this commit was noticed with a Type-C to VGA dongle. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19usb: host: xhci-rcar: Add XHCI_TRUST_TX_LENGTH quirkYasushi Asano
When plugging BUFFALO LUA4-U3-AGT USB3.0 to Gigabit Ethernet LAN Adapter, warning messages filled up dmesg. [ 101.098287] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? [ 101.117463] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? [ 101.136513] xhci-hcd ee000000.usb: WARN Successful completion on short TX for slot 1 ep 4: needs XHCI_TRUST_TX_LENGTH quirk? Adding the XHCI_TRUST_TX_LENGTH quirk resolves the issue. Signed-off-by: Yasushi Asano <yasano@jp.adit-jv.com> Signed-off-by: Spyridon Papageorgiou <spapageorgiou@de.adit-jv.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19usb: typec: Fix unchecked return valueGustavo A. R. Silva
Currently there is no check on platform_get_irq() return value in case it fails, hence never actually reporting any errors and causing unexpected behavior when using such value as argument for function regmap_irq_get_virq(). Fix this by adding a proper check, a message error and return *irq* in case platform_get_irq() fails. Addresses-Coverity-ID: 1443899 ("Improper use of negative value") Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19USB: serial: option: set driver_info for SIM5218 and compatiblesMans Rullgard
The SIMCom SIM5218 and compatible devices have 5 USB interfaces, only 4 of which are serial ports. The fifth is a network interface supported by the qmi-wwan driver. Furthermore, the serial ports do not support modem control signals. Add driver_info flags to reflect this. Signed-off-by: Mans Rullgard <mans@mansr.com> Fixes: ec0cd94d881c ("usb: option: add SIMCom SIM5218") Cc: stable <stable@vger.kernel.org> # 3.2 Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-19USB: serial: ftdi_sio: add additional NovaTech productsGeorge McCollister
Add PIDs for the NovaTech OrionLX+ and Orion I/O so they can be automatically detected. Signed-off-by: George McCollister <george.mccollister@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-19USB: serial: option: add support for Quectel EM12Kristian Evensen
The Quectel EM12 is a Cat. 12 LTE modem. It behaves in the exactly the same way as the EP06 (including the dynamic configuration behavior), so the same checks on reserved interfaces, etc. are needed. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2019-03-12memblock: drop memblock_alloc_*_nopanic() variantsMike Rapoport
As all the memblock allocation functions return NULL in case of error rather than panic(), the duplicates with _nopanic suffix can be removed. Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Petr Mladek <pmladek@suse.com> [printk] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> [c-sky] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Juergen Gross <jgross@suse.com> [Xen] Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-03-09Merge tag 'pci-v5.1-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Use match_string() instead of reimplementing it (Andy Shevchenko) - Enable SERR# forwarding for all bridges (Bharat Kumar Gogada) - Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) - Fix DPC use of uninitialized data (Dongdong Liu) - Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) - Reorder pciehp cached state/hardware state updates to avoid missed interrupts (Mika Westerberg) - Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann) - Mark expected switch fall-through (Mathieu Malaterre) - Use of_node_name_eq() for node name comparisons (Rob Herring) - Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang) - Consolidate Rohm Vendor ID definitions (Andy Shevchenko) - Use u32 (not __u32) for things not exposed to userspace (Logan Gunthorpe) - Fix locking semantics of bus and slot reset interfaces (Alex Williamson) - Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang) - Allow portdrv to claim subtractive decode Ports so PCIe services will work for them (Honghui Zhang) - Report PCIe links that become degraded at run-time (Alexandru Gagniuc) - Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt hotplug (Mika Westerberg) - Revert runtime PM suspend/resume callbacks that broke PME on network cable plug (Mika Westerberg) - Disable Data Link State Changed interrupts to prevent wakeup immediately after suspend (Mika Westerberg) - Extend altera to support Stratix 10 (Ley Foon Tan) - Allow building altera driver on ARM64 (Ley Foon Tan) - Replace Douglas with Tom Joseph as Cadence PCI host/endpoint maintainer (Lorenzo Pieralisi) - Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro) - Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I) - Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay Abraham I) - Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I) - Simplify dwc (remove unnecessary header includes, name variables consistently, reduce inverted logic, etc) (Gustavo Pimentel) - Add i.MX8MQ support (Andrey Smirnov) - Add message to help debug dwc MSI-X mask bit errors (Gustavo Pimentel) - Work around imx7d PCIe PLL erratum (Trent Piepho) - Don't assert qcom reset GPIO during probe (Bjorn Andersson) - Skip dwc MSI init if MSIs have been disabled (Lucas Stach) - Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI endpoint framework (Wen Yang) - Add interface to discover supported endpoint features to replace a bitfield that wasn't flexible enough (Kishon Vijay Abraham I) - Implement the new supported-feature interface for designware-plat, dra7xx, rockchip, cadence (Kishon Vijay Abraham I) - Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I) - Add layerscape endpoint mode support (Xiaowei Bao) - Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya Nakamura) - Rework hv_irq_unmask() to use cpumask_to_vpset() instead of open-coded reimplementation (Maya Nakamura) - Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura) - Fix mediatek MMIO size computation to enable full size of available MMIO space (Honghui Zhang) - Fix mediatek DMA window size computation to allow endpoint DMA access to full DRAM address range (Honghui Zhang) - Fix mvebu prefetchable BAR regression caused by common bridge emulation that assumed all bridges had prefetchable windows (Thomas Petazzoni) - Make advk_pci_bridge_emul_ops static (Wei Yongjun) - Configure MPS settings for VMD root ports (Jon Derrick) * tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) PCI: Update PCIEPORTBUS Kconfig help text PCI: Fix "try" semantics of bus and slot reset PCI/LINK: Report degraded links via link bandwidth notification dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 PCI: altera: Enable driver on ARM64 PCI: altera: Add Stratix 10 PCIe support PCI/PME: Fix possible use-after-free on remove PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static PCI: dwc: skip MSI init if MSIs have been explicitly disabled PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset() PCI: hv: Replace hv_vp_set with hv_vpset PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM PCI: mediatek: Fix memory mapped IO range size computation PCI: dwc: Remove superfluous shifting in definitions PCI: dwc: Make use of GENMASK/FIELD_PREP PCI: dwc: Make use of BIT() in constant definitions PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() PCI: dwc: Make use of IS_ALIGNED() PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ ...
2019-03-06Merge tag 'usb-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver pull request for 5.1-rc1. The usual set of gadget driver updates, phy driver updates, xhci updates, and typec additions. Also included in here are a lot of small cleanups and fixes and driver updates where needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) wusb: Remove unnecessary static function ckhdid_printf usb: core: make default autosuspend delay configurable usb: core: Fix typo in description of "authorized_default" usb: chipidea: Refactor USB PHY selection and keep a single PHY usb: chipidea: Grab the (legacy) USB PHY by phandle first usb: chipidea: imx: set power polarity dt-bindings: usb: ci-hdrc-usb2: add property power-active-high usb: chipidea: imx: remove unused header files usb: chipidea: tegra: Fix missed ci_hdrc_remove_device() usb: core: add option of only authorizing internal devices usb: typec: tps6598x: handle block writes separately with plain-I2C adapters usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI usb: xhci: fix build warning - missing prototype usb: xhci: dbc: Fixing typo error. usb: xhci: remove unused member 'parent' in xhci_regset struct xhci: tegra: Prevent error pointer dereference USB: serial: option: add Telit ME910 ECM composition usb: core: Replace hardcoded check with inline function from usb.h usb: core: skip interfaces disabled in devicetree usb: typec: mux: remove redundant check on variable match ...
2019-03-06Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The APM X-Gene platform is now maintained by folks from Ampere computing that took over the product line a while ago, this gets reflected in the MAINTAINERS file. Cleanups continue on the older mach-davinci and mach-pxa platform, to get them to be more like the modern ones. For pxa, we now remove the Raumfeld platform code as it now works with device tree based booting. i.MX adds a couple new features for the i.MX7ULP SoC Mediatek gains support for a new SoC: MT7629 is a new wireless router platform, following MT7623. Aside from those, there are the usual minor cleanups and bugfixes across several platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) MAINTAINERS: Update Ampere email address usb: ohci-da8xx: remove unused callbacks from platform data ARM: davinci: da830-evm: remove legacy usb helpers ARM: davinci: omapl138-hawk: remove legacy usb helpers usb: ohci-da8xx: add vbus and overcurrent gpios ARM: davinci: da830-evm: use gpio lookup entries for usb gpios ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios usb: ohci-da8xx: add a helper pointer to &pdev->dev usb: ohci-da8xx: add a new line after local variables arm64: meson: enable g12a clock controller MAINTAINERS: Add entry for uDPU board ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API arm: mediatek: add MT7629 smp bring up code Revert "ARM: mediatek: add MT7623a smp bringup code" dt-bindings: soc: fix typo of MT8173 power dt-bindings ARM: meson: remove COMMON_CLK_AMLOGIC selection arm64: meson: remove COMMON_CLK_AMLOGIC selection ARM: lpc32xx: remove platform data of ARM PL111 LCD controller ARM: lpc32xx: remove platform data of ARM PL180 SD/MMC controller ARM: lpc32xx: Use kmemdup to replace duplicating its implementation ...
2019-03-01wusb: Remove unnecessary static function ckhdid_printfJoe Perches
This static inline is unnecessary and can be removed by using the vsprintf %ph extension. This reduces overall object size by more than 2K. Reported-by: Louis Taylor <louis@kragniz.eu> Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Louis Taylor <louis@kragniz.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-01usb: core: make default autosuspend delay configurableMans Rullgard
Make the default autosuspend delay configurable at build time. This is useful for systems that require a non-standard value as it avoids relying on the command line being properly set. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27usb: core: Fix typo in description of "authorized_default"Jakub Wilk
Add missing right parenthesis. Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27usb: chipidea: Refactor USB PHY selection and keep a single PHYPaul Kocialkowski
Refactor the code in charge of looking up the USB PHY when no platdata is provided. Attempt to get a generic USB PHY first, then look for a legacy USB PHY through device-tree and finally get any registered PHY with the correct type. This way, only a single USB PHY is obtained and the flow is easier to understand and follow. All error pointers (except for EPROBE_DEFER) are considered as PHY not found. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27usb: chipidea: Grab the (legacy) USB PHY by phandle firstPaul Kocialkowski
According to the chipidea driver bindings, the USB PHY is specified via the "phys" phandle node. However, this only takes effect for USB PHYs that use the common PHY framework. For legacy USB PHYs, a simple lookup based on the USB PHY type is done instead. This does not play out well when more than one USB PHY is registered, since the first registered PHY matching the type will always be returned regardless of what the driver was bound to. Fix this by looking up the PHY based on the "phys" phandle node. Although generic PHYs are rather matched by their "phys-name" and not the "phys" phandle directly, there is no helper for similar lookup on legacy PHYs and it's probably not worth the effort to add it. When no legacy USB PHY is found by phandle, fallback to grabbing any registered USB2 PHY. This ensures backward compatibility if some users were actually relying on this mechanism. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27usb: chipidea: imx: set power polarityPhilipp Puschmann
This patch adds support to set the power line polarity for i.MX SoCs. To let the USB controller control the power it may be necessary to configure the polarity of the power line. So far the polarity was configured by Bootloader or alternatively the power line was muxed as gpio and driven by a regulator. Also make use of of_property_read_bool. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-27usb: chipidea: imx: remove unused header filesJun Li
Those 2 headers files are not required now. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-26usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()Dmitry Osipenko
The ChipIdea's platform device need to be unregistered on Tegra's driver module removal. Fixes: dfebb5f43a78827a ("usb: chipidea: Add support for Tegra20/30/114/124") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-24Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== Here's the main bluetooth-next pull request for the 5.1 kernel. - Fixes & improvements to mediatek, hci_qca, btrtl, and btmrvl HCI drivers - Fixes to parsing invalid L2CAP config option sizes - Locking fix to bt_accept_enqueue() - Add support for new Marvel sd8977 chipset - Various other smaller fixes & cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22usb: core: add option of only authorizing internal devicesDmitry Torokhov
On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21Merge tag 'usb-serial-5.1-rc1-2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for 5.1-rc1 Here are a couple of new device ids for 5.1-rc1. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.1-rc1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ftdi_sio: add ID for Hjelmslund Electronics USB485 USB: serial: cp210x: add ID for Ingenico 3070
2019-02-21Merge tag 'usb-serial-5.1-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.1-rc1 Here are the USB-serial updates for 5.1-rc1, including: - support for the last three GPIOs on cp2102n devices - gpio support for cp2104 - support for using cp210x gpios with autosuspend - proper error handling for unsupported cp2105 line speeds Included is also a new modem device id. All have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.1-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit ME910 ECM composition USB: serial: cp210x: fix GPIO in autosuspend USB: serial: cp210x: add minimum baud rate for CP2105 SCI USB: serial: cp210x: add GPIO support for CP2104 USB: serial: cp210x: support all gpios on CP2102N QFN28 package
2019-02-21usb: typec: tps6598x: handle block writes separately with plain-I2C adaptersNikolaus Voss
Commit 1a2f474d328f handles block _reads_ separately with plain-I2C adapters, but the problem described with regmap-i2c not handling SMBus block transfers (i.e. read and writes) correctly also exists with writes. As workaround, this patch adds a block write function the same way 1a2f474d328f adds a block read function. Fixes: 1a2f474d328f ("usb: typec: tps6598x: handle block reads separately with plain-I2C adapters") Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de> Cc: stable <stable@vger.kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCIBalaji Manoharan
This fix enables USB role feature on intel commercial nuc platform which is based on Kabylake chipset. Signed-off-by: Balaji Manoharan <m.balaji@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-21usb: xhci: fix build warning - missing prototypeJean-Philippe Menil
Fix build warning when building drivers/usb/host/xhci-mem.o with W=1 due to missing prototype for xhci_free_virt_devices_depth_first. This function is only used in xhci-mem.c so just make it static. Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20usb: xhci: dbc: Fixing typo error.Prabhat Chand Pandey
Replaced "xhci_dbc_flush_reqests" with xhci_dbc_flush_requests". Signed-off-by: Prabhat Chand Pandey <prabhat.chand.pandey@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20usb: xhci: remove unused member 'parent' in xhci_regset structChunfeng Yun
The member @parent of xhci_regset struct is not used in fact, so remove it Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20xhci: tegra: Prevent error pointer dereferenceThierry Reding
During initialization, the host and super-speed power domains will contain an ERR_PTR() encoded error code rather than being NULL. To avoid a crash, use a !IS_ERR_OR_NULL() condition during cleanup. Signed-off-by: Thierry Reding <treding@nvidia.com> Fixes: 6494a9ad86de ("usb: xhci: tegra: Add genpd support") Cc: stable <stable@vger.kernel.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>