summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2020-12-04usb: gadget: f_fs: Use local copy of descriptors for userspace copyVamsi Krishna Samavedam
The function may be unbound causing the ffs_ep and its descriptors to be freed while userspace is in the middle of an ioctl requesting the same descriptors. Avoid dangling pointer reference by first making a local copy of desctiptors before releasing the spinlock. Fixes: c559a3534109 ("usb: gadget: f_fs: add ioctl returning ep descriptor") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201130203453.28154-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04usb: ohci-omap: Fix descriptor conversionLinus Walleij
There were a bunch of issues with the patch converting the OMAP1 OSK board to use descriptors for controlling the USB host: - The chip label was incorrect - The GPIO offset was off-by-one - The code should use sleeping accessors This patch tries to fix all issues at the same time. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 15d157e87443 ("usb: ohci-omap: Convert to use GPIO descriptors") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201130083033.29435-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04Revert "usb-storage: fix sdev->host->dma_dev"Greg Kroah-Hartman
This reverts commit 0154012f8018bba4d9971d1007c12ffd48539ddb as Hans reports it causes problems on some systems. Until a "real" fix for this can be found, revert this change to get normal functionality back. Link: https://lore.kernel.org/r/70ca74c2-4a80-e25b-eca9-a63a75516673@redhat.com Cc: Tom Yan <tom.ty89@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04Revert "uas: fix sdev->host->dma_dev"Greg Kroah-Hartman
This reverts commit 558033c2828f832ab3b68c6f8b8710e0de6faef0 as Hans reports it causes problems on some systems. Until a "real" fix for this can be found, revert this change to get normal functionality back. Link: https://lore.kernel.org/r/70ca74c2-4a80-e25b-eca9-a63a75516673@redhat.com Cc: Tom Yan <tom.ty89@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04Revert "uas: bump hw_max_sectors to 2048 blocks for SS or faster drives"Greg Kroah-Hartman
This reverts commit 5df7ef7d32fec1d6d1c34dbec019b461a12ce870 as Hans reports it causes problems on some systems. Until a "real" fix for this can be found, revert this change to get normal functionality back. Link: https://lore.kernel.org/r/70ca74c2-4a80-e25b-eca9-a63a75516673@redhat.com Cc: Tom Yan <tom.ty89@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04Merge tag 'usb-serial-5.10-rc7' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.10-rc7 Here's a fix for a regression in the option driver which has been backported to the stable trees and fix for a small memory leak on open in the kl5kusb105 driver. Included are also various new device ids. All but the memleak fix has been in linux-next and with no reported issues. * tag 'usb-serial-5.10-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: kl5kusb105: fix memleak on open USB: serial: ch341: sort device-id entries USB: serial: ch341: add new Product ID for CH341A USB: serial: option: fix Quectel BG96 matching USB: serial: option: add support for Thales Cinterion EXS82 USB: serial: option: add Fibocom NL668 variants
2020-12-04USB: serial: kl5kusb105: fix memleak on openJohan Hovold
Fix memory leak of control-message transfer buffer on successful open(). Fixes: 6774d5f53271 ("USB: serial: kl5kusb105: fix open error path") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-03USB: serial: ch341: sort device-id entriesJohan Hovold
Keep the device-id entries sorted to make it easier to add new ones in the right spot. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-03USB: serial: ch341: add new Product ID for CH341AJan-Niklas Burfeind
Add PID for CH340 that's found on a ch341 based Programmer made by keeyees. The specific device that contains the serial converter is described here: http://www.keeyees.com/a/Products/ej/36.html The driver works flawlessly as soon as the new PID (0x5512) is added to it. Signed-off-by: Jan-Niklas Burfeind <kernel@aiyionpri.me> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-12-01USB: serial: option: fix Quectel BG96 matchingBjørn Mork
This is a partial revert of commit 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") The Quectel BG96 is different from most other modern Quectel modems, having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff class/subclass/protocol. Including it in the change to accommodate dynamic function mapping was incorrect. Revert to interface number matching for the BG96, assuming static layout of the RMNET function on interface 4. This restores support for the serial functions on interfaces 2 and 3. Full lsusb output for the BG96: Bus 002 Device 003: ID 2c7c:0296 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2c7c idProduct 0x0296 bcdDevice 0.00 iManufacturer 3 Qualcomm, Incorporated iProduct 2 Qualcomm CDMA Technologies MSM iSerial 4 d1098243 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 145 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 1 Qualcomm Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 254 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Fixes: 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-30Merge tag 'usb-fixes-v5.10-rc6' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: - Fixed hardware role switch issue at TI platform - Fixed scatter-list buffer handling - Fixed error goto label issue * tag 'usb-fixes-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdns3: core: fix goto label for error path usb: cdns3: gadget: clear trb->length as zero after preparing every trb usb: cdns3: Fix hardware based role switch
2020-11-30usb: cdns3: core: fix goto label for error pathPeter Chen
The usb_role_switch_register has been already called, so if the devm_request_irq has failed, it needs to call usb_role_switch_unregister. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-11-30usb: cdns3: gadget: clear trb->length as zero after preparing every trbPeter Chen
It clears trb->length as zero before preparing td, but if scatter buffer is used for td, there are several trbs within td, it needs to clear every trb->length as zero, otherwise, the default value for trb->length may not be zero after it begins to use the second round of trb rings. Fixes: abc6b579048e ("usb: cdns3: gadget: using correct sg operations") Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-11-30usb: cdns3: Fix hardware based role switchRoger Quadros
Hardware based role switch is broken as the driver always skips it. Fix this by registering for SW role switch only if 'usb-role-switch' property is present in the device tree. Fixes: 50642709f659 ("usb: cdns3: core: quit if it uses role switch class") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-11-27usb: typec: stusb160x: fix power-opmode property with typec-power-opmodeAmelie Delaunay
Device tree property is named typec-power-opmode, not power-opmode. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201127131735.28280-1-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-27USB: serial: option: add support for Thales Cinterion EXS82Giacinto Cifelli
There is a single option port in this modem, and it is used as debug port. lsusb -v for this device: Bus 001 Device 002: ID 1e2d:006c Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006c bcdDevice 0.00 iManufacturer 4 iProduct 3 iSerial 5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 243 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 2 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 1 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 2 CDC Union: bMasterInterface 1 bSlaveInterface 2 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 3 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 4 CDC Union: bMasterInterface 3 bSlaveInterface 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 5 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 (??) bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 5 bSlaveInterface 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-20USB: core: Change %pK for __user pointers to %pxAlan Stern
Commit 2f964780c03b ("USB: core: replace %p with %pK") used the %pK format specifier for a bunch of __user pointers. But as the 'K' in the specifier indicates, it is meant for kernel pointers. The reason for the %pK specifier is to avoid leaks of kernel addresses, but when the pointer is to an address in userspace the security implications are minimal. In particular, no kernel information is leaked. This patch changes the __user %pK specifiers (used in a bunch of debugging output lines) to %px, which will always print the actual address with no mangling. (Notably, there is no printk format specifier particularly intended for __user pointers.) Fixes: 2f964780c03b ("USB: core: replace %p with %pK") CC: Vamsi Krishna Samavedam <vskrishn@codeaurora.org> CC: <stable@vger.kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201119170228.GB576844@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20USB: core: Fix regression in Hercules audio cardAlan Stern
Commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") aimed to make the USB stack more reliable by detecting and skipping over endpoints that are duplicated between interfaces. This caused a regression for a Hercules audio card (reported as Bugzilla #208357), which contains such non-compliant duplications. Although the duplications are harmless, skipping the valid endpoints prevented the device from working. This patch fixes the regression by adding ENDPOINT_IGNORE quirks for the Hercules card, telling the kernel to ignore the invalid duplicate endpoints and thereby allowing the valid endpoints to be used as intended. Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") CC: <stable@vger.kernel.org> Reported-by: Alexander Chalikiopoulos <bugzilla.kernel.org@mrtoasted.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201119170040.GA576844@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20usb: gadget: Fix memleak in gadgetfs_fill_superZhang Qilong
usb_get_gadget_udc_name will alloc memory for CHIP in "Enomem" branch. we should free it before error returns to prevent memleak. Fixes: 175f712119c57 ("usb: gadget: provide interface for legacy gadgets to get UDC name") Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201117021629.1470544-3-zhangqilong3@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20usb: gadget: f_midi: Fix memleak in f_midi_allocZhang Qilong
In the error path, if midi is not null, we should free the midi->id if necessary to prevent memleak. Fixes: b85e9de9e818d ("usb: gadget: f_midi: convert to new function interface with backward compatibility") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201117021629.1470544-2-zhangqilong3@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO ↵penghao
built-in usb-audio card Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in usb-audio. when A630Z going into S3,the system immediately wakeup 7-8 seconds later by usb-audio disconnect interrupt to avoids the issue. eg dmesg: .... [ 626.974091 ] usb 7-1.1: USB disconnect, device number 3 .... .... [ 1774.486691] usb 7-1.1: new full-speed USB device number 5 using xhci_hcd [ 1774.947742] usb 7-1.1: New USB device found, idVendor=17ef, idProduct=a012, bcdDevice= 0.55 [ 1774.956588] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1774.964339] usb 7-1.1: Product: Thinkcentre TIO24Gen3 for USB-audio [ 1774.970999] usb 7-1.1: Manufacturer: Lenovo [ 1774.975447] usb 7-1.1: SerialNumber: 000000000000 [ 1775.048590] usb 7-1.1: 2:1: cannot get freq at ep 0x1 ....... Seeking a better fix, we've tried a lot of things, including: - Check that the device's power/wakeup is disabled - Check that remote wakeup is off at the USB level - All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME, USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM. but none of that makes any difference. There are no errors in the logs showing any suspend/resume-related issues. When the system wakes up due to the modem, log-wise it appears to be a normal resume. Introduce a quirk to disable the port during suspend when the modem is detected. Signed-off-by: penghao <penghao@uniontech.com> Link: https://lore.kernel.org/r/20201118123039.11696-1-penghao@uniontech.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-20USB: serial: option: add Fibocom NL668 variantsVincent Palatin
Update the USB serial option driver support for the Fibocom NL668 Cat.4 LTE modules as there are actually several different variants. Got clarifications from Fibocom, there are distinct products: - VID:PID 1508:1001, NL668 for IOT (no MBIM interface) - VID:PID 2cb7:01a0, NL668-AM and NL652-EU are laptop M.2 cards (with MBIM interfaces for Windows/Linux/Chrome OS), respectively for Americas and Europe. usb-devices output for the laptop M.2 cards: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a0 Rev=03.18 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom NL652-EU Modem S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-16usb: typec: qcom-pmic-typec: fix builtin build errorsRandy Dunlap
Fix build errors when CONFIG_TYPEC_QCOM_PMIC=y and CONFIG_USB_ROLE_SWITCH=m by limiting the former to =m when USB_ROLE_SWITCH also =m. powerpc64-linux-ld: drivers/usb/typec/qcom-pmic-typec.o: in function `.qcom_pmic_typec_remove': qcom-pmic-typec.c:(.text+0x28): undefined reference to `.usb_role_switch_set_role' powerpc64-linux-ld: qcom-pmic-typec.c:(.text+0x64): undefined reference to `.usb_role_switch_put' powerpc64-linux-ld: drivers/usb/typec/qcom-pmic-typec.o: in function `.qcom_pmic_typec_check_connection': qcom-pmic-typec.c:(.text+0x120): undefined reference to `.usb_role_switch_set_role' powerpc64-linux-ld: drivers/usb/typec/qcom-pmic-typec.o: in function `.qcom_pmic_typec_probe': qcom-pmic-typec.c:(.text+0x360): undefined reference to `.fwnode_usb_role_switch_get' powerpc64-linux-ld: qcom-pmic-typec.c:(.text+0x4e4): undefined reference to `.usb_role_switch_put' Fixes: 6c8cf3695176 ("usb: typec: Add QCOM PMIC typec detection driver") Cc: linux-usb@vger.kernel.org Cc: Wesley Cheng <wcheng@codeaurora.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20201116040653.7943-1-rdunlap@infradead.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-16Merge tag 'usb-fixes-v5.10-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: Two bugs for Cadence USB3 gadget driver - TD_SIZE entry at descriptor is error for multiple-trb use case - Possible use uninitialized variables * tag 'usb-fixes-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdns3: gadget: calculate TD_SIZE based on TD usb: cdns3: gadget: initialize link_trb as NULL
2020-11-16usb: cdns3: gadget: calculate TD_SIZE based on TDPeter Chen
The TRB entry TD_SIZE is the packet number for the TD (request) but not the each TRB, so it only needs to be assigned for the first TRB during the TD, and the value of it is for TD too. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-11-16usb: cdns3: gadget: initialize link_trb as NULLPeter Chen
There is an uninitialized variable "link_trb" usage at function cdns3_ep_run_transfer. Fixed it by initialize "link_trb" as NULL. Fixes: 4e218882eb5a ("usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-11-13usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download modeChris Brandt
Renesas R-Car and RZ/G SoCs have a firmware download mode over USB. However, on reset a banner string is transmitted out which is not expected to be echoed back and will corrupt the protocol. Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Link: https://lore.kernel.org/r/20201111131209.3977903-1-chris.brandt@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13usb: typec: ucsi: Report power supply changesHeikki Krogerus
When the ucsi power supply goes online/offline, and when the power levels change, the power supply class needs to be notified so it can inform the user space. Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") Cc: stable@vger.kernel.org Reported-and-tested-by: Vladimir Yerilov <openmindead@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201110120547.67922-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13xhci: hisilicon: fix refercence leak in xhci_histb_probeZhang Qilong
pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. We should decrease the usage count whetever it succeeded or failed(maybe runtime of the device has error, or device is in inaccessible state, or other error state). If we do not call put operation to decrease the reference, it will result in reference leak in xhci_histb_probe. Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we fixed it by jumping to error handling branch. Fixes: c508f41da0788 ("xhci: hisilicon: support HiSilicon STB xHCI host controller") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201106122221.2304528-1-zhangqilong3@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13Revert "usb: musb: convert to devm_platform_ioremap_resource_byname"Geert Uytterhoeven
This reverts commit 2d30e408a2a6b3443d3232593e3d472584a3e9f8. On Beaglebone Black, where each interface has 2 children: musb-dsps 47401c00.usb: can't request region for resource [mem 0x47401800-0x474019ff] musb-hdrc musb-hdrc.1: musb_init_controller failed with status -16 musb-hdrc: probe of musb-hdrc.1 failed with error -16 musb-dsps 47401400.usb: can't request region for resource [mem 0x47401000-0x474011ff] musb-hdrc musb-hdrc.0: musb_init_controller failed with status -16 musb-hdrc: probe of musb-hdrc.0 failed with error -16 Before, devm_ioremap_resource() was called on "dev" ("musb-hdrc.0" or "musb-hdrc.1"), after it is called on "&pdev->dev" ("47401400.usb" or "47401c00.usb"), leading to a duplicate region request, which fails. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 2d30e408a2a6 ("usb: musb: convert to devm_platform_ioremap_resource_byname") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201112135900.3822599-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-07Merge tag 'usb-serial-5.10-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.10-rc3 Here's a fix for a long-standing issue with the cyberjack driver and some new device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN980 composition 0x1055 USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231 USB: serial: cyberjack: fix write-URB completion race USB: serial: option: add Quectel EC200T module support
2020-11-06USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_propertyZhang Qilong
pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. If runtime of the device has error or device is in inaccessible state(or other error state), resume operation will fail. If we do not call put operation to decrease the reference, the result is that this device cannot enter the idle state and always stay busy or other non-idle state. Fixes: 249fa8217b846 ("USB: Add driver to control USB fast charge for iOS devices") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201102022650.67115-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06usb: mtu3: fix panic in mtu3_gadget_stop()Macpaul Lin
This patch fixes a possible issue when mtu3_gadget_stop() already assigned NULL to mtu->gadget_driver during mtu_gadget_disconnect(). [<ffffff9008161974>] notifier_call_chain+0xa4/0x128 [<ffffff9008161fd4>] __atomic_notifier_call_chain+0x84/0x138 [<ffffff9008162ec0>] notify_die+0xb0/0x120 [<ffffff900809e340>] die+0x1f8/0x5d0 [<ffffff90080d03b4>] __do_kernel_fault+0x19c/0x280 [<ffffff90080d04dc>] do_bad_area+0x44/0x140 [<ffffff90080d0f9c>] do_translation_fault+0x4c/0x90 [<ffffff9008080a78>] do_mem_abort+0xb8/0x258 [<ffffff90080849d0>] el1_da+0x24/0x3c [<ffffff9009bde01c>] mtu3_gadget_disconnect+0xac/0x128 [<ffffff9009bd576c>] mtu3_irq+0x34c/0xc18 [<ffffff90082ac03c>] __handle_irq_event_percpu+0x2ac/0xcd0 [<ffffff90082acae0>] handle_irq_event_percpu+0x80/0x138 [<ffffff90082acc44>] handle_irq_event+0xac/0x148 [<ffffff90082b71cc>] handle_fasteoi_irq+0x234/0x568 [<ffffff90082a8708>] generic_handle_irq+0x48/0x68 [<ffffff90082a96ac>] __handle_domain_irq+0x264/0x1740 [<ffffff90080819f4>] gic_handle_irq+0x14c/0x250 [<ffffff9008084cec>] el1_irq+0xec/0x194 [<ffffff90085b985c>] dma_pool_alloc+0x6e4/0xae0 [<ffffff9008d7f890>] cmdq_mbox_pool_alloc_impl+0xb0/0x238 [<ffffff9008d80904>] cmdq_pkt_alloc_buf+0x2dc/0x7c0 [<ffffff9008d80f60>] cmdq_pkt_add_cmd_buffer+0x178/0x270 [<ffffff9008d82320>] cmdq_pkt_perf_begin+0x108/0x148 [<ffffff9008d824d8>] cmdq_pkt_create+0x178/0x1f0 [<ffffff9008f96230>] mtk_crtc_config_default_path+0x328/0x7a0 [<ffffff90090246cc>] mtk_drm_idlemgr_kick+0xa6c/0x1460 [<ffffff9008f9bbb4>] mtk_drm_crtc_atomic_begin+0x1a4/0x1a68 [<ffffff9008e8df9c>] drm_atomic_helper_commit_planes+0x154/0x878 [<ffffff9008f2fb70>] mtk_atomic_complete.isra.16+0xe80/0x19c8 [<ffffff9008f30910>] mtk_atomic_commit+0x258/0x898 [<ffffff9008ef142c>] drm_atomic_commit+0xcc/0x108 [<ffffff9008ef7cf0>] drm_mode_atomic_ioctl+0x1c20/0x2580 [<ffffff9008ebc768>] drm_ioctl_kernel+0x118/0x1b0 [<ffffff9008ebcde8>] drm_ioctl+0x5c0/0x920 [<ffffff900863b030>] do_vfs_ioctl+0x188/0x1820 [<ffffff900863c754>] SyS_ioctl+0x8c/0xa0 Fixes: df2069acb005 ("usb: Add MediaTek USB3 DRD driver") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1604642069-20961-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-04USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas
Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-04USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas
Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-04USB: serial: cyberjack: fix write-URB completion raceJohan Hovold
The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-03USB: Add NO_LPM quirk for Kingston flash driveAlan Stern
In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston flash drive spontaneously disconnects and reconnects, over and over. Testing revealed that disabling Link Power Management for the drive fixed the problem. This patch adds a quirk entry for that drive to turn off LPM permanently. CC: Hans de Goede <jwrdegoede@fedoraproject.org> CC: <stable@vger.kernel.org> Reported-and-tested-by: Julien Humbert <julroy67@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-02Merge tag 'fixes-for-v5.10-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.10-rc2 Nothing major as of yet, we're adding support for Intel Alder Lake-S in dwc3, together with a few fixes that are quite important (memory leak in raw-gadget, probe crashes in goku_udc, and so on). Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'fixes-for-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: raw-gadget: fix memory leak in gadget_setup usb: dwc2: Avoid leaving the error_debugfs label unused usb: dwc3: ep0: Fix delay status handling usb: gadget: fsl: fix null pointer checking usb: gadget: goku_udc: fix potential crashes in probe usb: dwc3: pci: add support for the Intel Alder Lake-S
2020-10-30Merge tag 'usb-v5.10-rc2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus Peter writes: 4 bug fixes for Cadence 3 driver. The biggest fix is changing endpoint configuration method to avoid FIFO overflow at multiple endpoints situation. * tag 'usb-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: cdns3: gadget: own the lock wrongly at the suspend routine usb: cdns3: Fix on-chip memory overflow issue usb: cdns3: gadget: suspicious implicit sign extension usb: cdns3: Variable 'length' set but not used
2020-10-30usb: cdns3: gadget: own the lock wrongly at the suspend routinePeter Chen
When the system goes to suspend, if the controller is at device mode with cable connecting to host, the call stack is: cdns3_suspend-> cdns3_gadget_suspend -> cdns3_disconnect_gadget, after cdns3_disconnect_gadget is called, it owns lock wrongly, it causes the system being deadlock after resume due to at cdns3_device_thread_irq_handler, it tries to get the lock, but can't get it forever. To fix it, we delete the unlock-lock operations at cdns3_disconnect_gadget, and do it at the caller. Fixes: b1234e3b3b26 ("usb: cdns3: add runtime PM support") Acked-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-30usb: cdns3: Fix on-chip memory overflow issuePawel Laszczak
Patch fixes issue caused setting On-chip memory overflow bit in usb_sts register. The issue occurred because EP_CFG register was set twice before USB_STS.CFGSTS was set. Every write operation on EP_CFG.BUFFERING causes that controller increases internal counter holding the number of reserved on-chip buffers. First time this register was updated in function cdns3_ep_config before delegating SET_CONFIGURATION request to class driver and again it was updated when class wanted to enable endpoint. This patch fixes this issue by configuring endpoints enabled by class driver in cdns3_gadget_ep_enable and others just before status stage. Cc: stable@vger.kernel.org#v5.8+ Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reported-and-tested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-29usb: cdns3: gadget: suspicious implicit sign extensionPeter Chen
The code: trb->length = cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) | TRB_LEN(length)); TRB_BURST_LEN(priv_ep->trb_burst_size) may be overflow for int 32 if priv_ep->trb_burst_size is equal or larger than 0x80; Below is the Coverity warning: sign_extension: Suspicious implicit sign extension: priv_ep->trb_burst_size with type u8 (8 bits, unsigned) is promoted in priv_ep->trb_burst_size << 24 to type int (32 bits, signed), then sign-extended to type unsigned long (64 bits, unsigned). If priv_ep->trb_burst_size << 24 is greater than 0x7FFFFFFF, the upper bits of the result will all be 1. To fix it, it needs to add an explicit cast to unsigned int type for ((p) << 24). Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-29xhci: Don't create stream debugfs files with spinlock held.Mathias Nyman
Creating debugfs files while loding the spin_lock_irqsave(xhci->lock) creates a lock dependecy that could possibly deadlock. Lockdep warns: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 5.10.0-rc1pdx86+ #8 Not tainted ----------------------------------------------------- systemd-udevd/386 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffffffffb1a94038 (pin_fs_lock){+.+.}-{2:2}, at: simple_pin_fs+0x22/0xa0 and this task is already holding: ffff9e7b87fbc430 (&xhci->lock){-.-.}-{2:2}, at: xhci_alloc_streams+0x5f9/0x810 which would create a new lock dependency: (&xhci->lock){-.-.}-{2:2} -> (pin_fs_lock){+.+.}-{2:2} Create the files a bit later after lock is released. Fixes: 673d74683627 ("usb: xhci: add debugfs support for ep with stream") CC: Li Jun <jun.li@nxp.com> Reported-by: Hans de Goede <hdegoede@redhat.com> Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHCSandeep Singh
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, need to disable a bit which is enable in sparse controller. Cc: stable@vger.kernel.org #v4.19+ Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29xhci: Fix sizeof() mismatchColin Ian King
An incorrect sizeof() is being used, sizeof(rhub->ports) is not correct, it should be sizeof(*rhub->ports). This bug did not cause any issues because it just so happens the sizes are the same. Fixes: bcaa9d5c5900 ("xhci: Create new structures to store xhci port information") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20201028203124.375344-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29usb: typec: stusb160x: fix signedness comparison issue with enum variablesAmelie Delaunay
chip->port_type and chip->pwr_opmode are enums and when GCC considers them as unsigned, the conditions are never met. This patch takes advantage of the ret variable and fixes the following warnings: drivers/usb/typec/stusb160x.c:548 stusb160x_get_fw_caps() warn: unsigned 'chip->port_type' is never less than zero. drivers/usb/typec/stusb160x.c:570 stusb160x_get_fw_caps() warn: unsigned 'chip->pwr_opmode' is never less than zero. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20201028163309.12878-1-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29usb: typec: add missing MODULE_DEVICE_TABLE() to stusb160xAmelie Delaunay
When stusb160x driver is built as a module, no modalias information is available, and it prevents the module to be loaded by udev. Add MODULE_DEVICE_TABLE() to fix this issue. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20201028151703.31195-1-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28USB: apple-mfi-fastcharge: don't probe unhandled devicesBastien Nocera
From: Bastien Nocera <hadess@hadess.net> Contrary to the comment above the id table, we didn't implement a match function. This meant that every single Apple device that was already plugged in to the computer would have its device driver reprobed when the apple-mfi-fastcharge driver was loaded, eg. the SD card reader could be reprobed when the apple-mfi-fastcharge after pivoting root during boot up and the module became available. Make sure that the driver probe isn't being run for unsupported devices by adding a match function that checks the product ID, in addition to the id_table checking the vendor ID. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1878347 Link: https://lore.kernel.org/linux-usb/CAE3RAxt0WhBEz8zkHrVO5RiyEOasayy1QUAjsv-pB0fAbY1GSw@mail.gmail.com/ Fixes: 249fa8217b84 ("USB: Add driver to control USB fast charge for iOS devices") Cc: <stable@vger.kernel.org> # 5.8 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> [m.v.b: Add Link and Reported-by tags to the commit message] Reported-by: Pany <pany@fedoraproject.org> Tested-by: Pan (Pany) YUAN <pany@fedoraproject.org> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Link: https://lore.kernel.org/r/20201022135521.375211-3-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usbcore: Check both id_table and match() when both availableBastien Nocera
From: Bastien Nocera <hadess@hadess.net> When a USB device driver has both an id_table and a match() function, make sure to check both to find a match, first matching the id_table, then checking the match() function. This makes it possible to have module autoloading done through the id_table when devices are plugged in, before checking for further device eligibility in the match() function. Cc: <stable@vger.kernel.org> # 5.8 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Co-developed-by: M. Vefa Bicakci <m.v.b@runbox.com> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Tested-by: Pan (Pany) YUAN <pany@fedoraproject.org> Link: https://lore.kernel.org/r/20201022135521.375211-2-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()Tang Bin
If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in tegra_ehci_probe(). Fixes: 79ad3b5add4a ("usb: host: Add EHCI driver for NVIDIA Tegra SoCs") Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20201026090657.49988-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-07-05 09:37:26 +0000