| Age | Commit message (Collapse) | Author |
|---|
|
Pull virtio updates from Michael Tsirkin:
- Per vq sizes in vdpa
- Info query for block devices support in vdpa
- DMA sync callbacks in vduse
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (35 commits)
virtio_net: rename free_old_xmit_skbs to free_old_xmit
virtio_net: unify the code for recycling the xmit ptr
virtio-net: add cond_resched() to the command waiting loop
virtio-net: convert rx mode setting to use workqueue
virtio: packed: fix unmap leak for indirect desc table
vDPA: report virtio-blk flush info to user space
vDPA: report virtio-block read-only info to user space
vDPA: report virtio-block write zeroes configuration to user space
vDPA: report virtio-block discarding configuration to user space
vDPA: report virtio-block topology info to user space
vDPA: report virtio-block MQ info to user space
vDPA: report virtio-block max segments in a request to user space
vDPA: report virtio-block block-size to user space
vDPA: report virtio-block max segment size to user space
vDPA: report virtio-block capacity to user space
virtio: make virtio_bus const
vdpa: make vdpa_bus const
vDPA/ifcvf: implement vdpa_config_ops.get_vq_num_min
vDPA/ifcvf: get_max_vq_size to return max size
virtio_vdpa: create vqs with the actual size
...
|
|
This commit introduces a new interface get_vq_size to
vDPA config ops, this new interface intends to report
the size of a specific virtqueue
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240202163905.8834-3-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If a vdpa device is not in state DRIVER_OK, then there is no driver state
to preserve, so no need to call the suspend and resume driver ops.
Suggested-by: Eugenio Perez Martin <eperezma@redhat.com>"
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Message-Id: <1707834358-165470-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
|
|
When the Qemu launched with vhost but without tap vnet_hdr,
vhost tries to copy vnet_hdr from socket iter with size 0
to the page that may contain some trash.
That trash can be interpreted as unpredictable values for
vnet_hdr.
That leads to dropping some packets and in some cases to
stalling vhost routine when the vhost_net tries to process
packets and fails in a loop.
Qemu options:
-netdev tap,vhost=on,vnet_hdr=off,...
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Message-Id: <20240115194840.1183077-1-andrew@daynix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The page frag in vhost_net_page_frag_refill() uses the
'struct page_frag' from skb_page_frag_refill(), but it's
implementation is similar to page_frag_alloc_align() now.
This patch removes vhost_net_page_frag_refill() by using
'struct page_frag_cache' instead of 'struct page_frag',
and allocating frag using page_frag_alloc_align().
The added benefit is that not only unifying the page frag
implementation a little, but also having about 0.5% performance
boost testing by using the vhost_net_test introduced in the
last patch.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently there seems to be three page frag implementations
which all try to allocate order 3 page, if that fails, it
then fail back to allocate order 0 page, and each of them
all allow order 3 page allocation to fail under certain
condition by using specific gfp bits.
The gfp bits for order 3 page allocation are different
between different implementation, __GFP_NOMEMALLOC is
or'd to forbid access to emergency reserves memory for
__page_frag_cache_refill(), but it is not or'd in other
implementions, __GFP_DIRECT_RECLAIM is masked off to avoid
direct reclaim in vhost_net_page_frag_refill(), but it is
not masked off in __page_frag_cache_refill().
This patch unifies the gfp bits used between different
implementions by or'ing __GFP_NOMEMALLOC and masking off
__GFP_DIRECT_RECLAIM for order 3 page allocation to avoid
possible pressure for mm.
Leave the gfp unifying for page frag implementation in sock.c
for now as suggested by Paolo Abeni.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull virtio updates from Michael Tsirkin:
- vdpa/mlx5: support for resumable vqs
- virtio_scsi: mq_poll support
- 3virtio_pmem: support SHMEM_REGION
- virtio_balloon: stay awake while adjusting balloon
- virtio: support for no-reset virtio PCI PM
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Add mkey leak detection
vdpa/mlx5: Introduce reference counting to mrs
vdpa/mlx5: Use vq suspend/resume during .set_map
vdpa/mlx5: Mark vq state for modification in hw vq
vdpa/mlx5: Mark vq addrs for modification in hw vq
vdpa/mlx5: Introduce per vq and device resume
vdpa/mlx5: Allow modifying multiple vq fields in one modify command
vdpa/mlx5: Expose resumable vq capability
vdpa: Block vq property changes in DRIVER_OK
vdpa: Track device suspended state
scsi: virtio_scsi: Add mq_poll support
virtio_pmem: support feature SHMEM_REGION
virtio_balloon: stay awake while adjusting balloon
vdpa: Remove usage of the deprecated ida_simple_xx() API
virtio: Add support for no-reset virtio PCI PM
virtio_net: fix missing dma unmap for resize
vhost-vdpa: account iommu allocations
vdpa: Fix an error handling path in eni_vdpa_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
The virtio standard doesn't allow for virtqueue address and state
changes when the device is in DRIVER_OK. Return an error in such cases
unless the device is suspended.
The suspended device exception is needed because some devices support
virtqueue changes when the device is suspended.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231225134210.151540-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Set vdpa device suspended state on successful suspend. Clear it on
successful resume and reset.
The state will be locked by the vhost_vdpa mutex. The mutex is taken
during suspend, resume and reset in vhost_vdpa_unlocked_ioctl. The
exception is vhost_vdpa_open which does a device reset but that should
be safe because it can only happen before the other ops.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Suggested-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20231225134210.151540-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Add Jan Kara as VFS reviewer
- Show correct device and inode numbers in proc/<pid>/maps for vma
files on stacked filesystems. This is now easily doable thanks to
the backing file work from the last cycles. This comes with
selftests
Cleanups:
- Remove a redundant might_sleep() from wait_on_inode()
- Initialize pointer with NULL, not 0
- Clarify comment on access_override_creds()
- Rework and simplify eventfd_signal() and eventfd_signal_mask()
helpers
- Process aio completions in batches to avoid needless wakeups
- Completely decouple struct mnt_idmap from namespaces. We now only
keep the actual idmapping around and don't stash references to
namespaces
- Reformat maintainer entries to indicate that a given subsystem
belongs to fs/
- Simplify fput() for files that were never opened
- Get rid of various pointless file helpers
- Rename various file helpers
- Rename struct file members after SLAB_TYPESAFE_BY_RCU switch from
last cycle
- Make relatime_need_update() return bool
- Use GFP_KERNEL instead of GFP_USER when allocating superblocks
- Replace deprecated ida_simple_*() calls with their current ida_*()
counterparts
Fixes:
- Fix comments on user namespace id mapping helpers. They aren't
kernel doc comments so they shouldn't be using /**
- s/Retuns/Returns/g in various places
- Add missing parameter documentation on can_move_mount_beneath()
- Rename i_mapping->private_data to i_mapping->i_private_data
- Fix a false-positive lockdep warning in pipe_write() for watch
queues
- Improve __fget_files_rcu() code generation to improve performance
- Only notify writer that pipe resizing has finished after setting
pipe->max_usage otherwise writers are never notified that the pipe
has been resized and hang
- Fix some kernel docs in hfsplus
- s/passs/pass/g in various places
- Fix kernel docs in ntfs
- Fix kcalloc() arguments order reported by gcc 14
- Fix uninitialized value in reiserfs"
* tag 'vfs-6.8.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
reiserfs: fix uninit-value in comp_keys
watch_queue: fix kcalloc() arguments order
ntfs: dir.c: fix kernel-doc function parameter warnings
fs: fix doc comment typo fs tree wide
selftests/overlayfs: verify device and inode numbers in /proc/pid/maps
fs/proc: show correct device and inode numbers in /proc/pid/maps
eventfd: Remove usage of the deprecated ida_simple_xx() API
fs: super: use GFP_KERNEL instead of GFP_USER for super block allocation
fs/hfsplus: wrapper.c: fix kernel-doc warnings
fs: add Jan Kara as reviewer
fs/inode: Make relatime_need_update return bool
pipe: wakeup wr_wait after setting max_usage
file: remove __receive_fd()
file: stop exposing receive_fd_user()
fs: replace f_rcuhead with f_task_work
file: remove pointless wrapper
file: s/close_fd_get_file()/file_close_fd()/g
Improve __fget_files_rcu() code generation (and thus __fget_light())
file: massage cleanup of files that failed to open
fs/pipe: Fix lockdep false-positive in watchqueue pipe_write()
...
|
|
iommu allocations should be accounted in order to allow admins to
monitor and limit the amount of iommu memory.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231226182827.294158-1-pasha.tatashin@soleen.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
Send credit update message when SO_RCVLOWAT is updated and it is bigger
than number of bytes in rx queue. It is needed, because 'poll()' will
wait until number of bytes in rx queue will be not smaller than
O_RCVLOWAT, so kick sender to send more data. Otherwise mutual hungup
for tx/rx is possible: sender waits for free space and receiver is
waiting data in 'poll()'.
Rename 'set_rcvlowat' callback to 'notify_set_rcvlowat' and set
'sk->sk_rcvlowat' only in one place (i.e. 'vsock_set_rcvlowat'), so the
transport doesn't need to do it.
Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ever since the eventfd type was introduced back in 2007 in commit
e1ad7468c77d ("signal/timer/event: eventfd core") the eventfd_signal()
function only ever passed 1 as a value for @n. There's no point in
keeping that additional argument.
Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl
Acked-by: Eric Farman <farman@linux.ibm.com> # s390
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
|
|
Pull virtio updates from Michael Tsirkin:
"vhost,virtio,vdpa: features, fixes, cleanups.
vdpa/mlx5:
- VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
- new maintainer
vdpa:
- support for vq descriptor mappings
- decouple reset of iotlb mapping from device reset
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vdpa_sim: implement .reset_map support
vdpa/mlx5: implement .reset_map driver op
vhost-vdpa: clean iotlb map during reset for older userspace
vdpa: introduce .compat_reset operation callback
vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
vhost-vdpa: reset vendor specific mapping to initial state in .release
vdpa: introduce .reset_map operation callback
virtio_pci: add check for common cfg size
virtio-blk: fix implicit overflow on virtio_max_dma_size
virtio_pci: add build offset check for the new common cfg items
virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
vduse: make vduse_class constant
vhost-scsi: Spelling s/preceeding/preceding/g
virtio: kdoc for struct virtio_pci_modern_device
vdpa: Update sysfs ABI documentation
MAINTAINERS: Add myself as mlx5_vdpa driver
virtio-balloon: correct the comment of virtballoon_migratepage()
mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa/mlx5: Update cvq iotlb mapping on ASID change
vdpa/mlx5: Make iotlb helper functions more generic
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
|
|
The put_device() calls vhost_vdpa_release_dev() which calls
ida_simple_remove() and frees "v". So this call to
ida_simple_remove() is a use after free and a double free.
Fixes: ebe6a354fa7e ("vhost-vdpa: Call ida_simple_remove() when failed")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-Id: <cf53cb61-0699-4e36-a980-94fd4268ff00@moroto.mountain>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Using .compat_reset op from the previous patch, the buggy .reset
behaviour can be kept as-is on older userspace apps, which don't ack the
IOTLB_PERSIST backend feature. As this compatibility quirk is limited to
those drivers that used to be buggy in the past, it won't affect change
the behaviour or affect ABI on the setups with API compliant driver.
The separation of .compat_reset from the regular .reset allows
vhost-vdpa able to know which driver had broken behaviour before, so it
can apply the corresponding compatibility quirk to the individual driver
whenever needed. Compared to overloading the existing .reset with
flags, .compat_reset won't cause any extra burden to the implementation
of every compliant driver.
[mst: squashed in two fixup commits]
Message-Id: <1697880319-4937-6-git-send-email-si-wei.liu@oracle.com>
Message-Id: <1698102863-21122-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <1698275594-19204-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Userspace needs this feature flag to distinguish if vhost-vdpa iotlb in
the kernel can be trusted to persist IOTLB mapping across vDPA reset.
Without it, userspace has no way to tell apart if it's running on an
older kernel, which could silently drop all iotlb mapping across vDPA
reset, especially with broken parent driver implementation for the
.reset driver op. The broken driver may incorrectly drop all mappings of
its own as part of .reset, which inadvertently ends up with corrupted
mapping state between vhost-vdpa userspace and the kernel. As a
workaround, to make the mapping behaviour predictable across reset,
userspace has to pro-actively remove all mappings before vDPA reset, and
then restore all the mappings afterwards. This workaround is done
unconditionally on top of all parent drivers today, due to the parent
driver implementation issue and no means to differentiate. This
workaround had been utilized in QEMU since day one when the
corresponding vhost-vdpa userspace backend came to the world.
There are 3 cases that backend may claim this feature bit on for:
- parent device that has to work with platform IOMMU
- parent device with on-chip IOMMU that has the expected
.reset_map support in driver
- parent device with vendor specific IOMMU implementation with
persistent IOTLB mapping already that has to specifically
declare this backend feature
The reason why .reset_map is being one of the pre-condition for
persistent iotlb is because without it, vhost-vdpa can't switch back
iotlb to the initial state later on, especially for the on-chip IOMMU
case which starts with identity mapping at device creation. virtio-vdpa
requires on-chip IOMMU to perform 1:1 passthrough translation from PA to
IOVA as-is to begin with, and .reset_map is the only means to turn back
iotlb to the identity mapping mode after vhost-vdpa is gone.
The difference in behavior did not matter as QEMU unmaps all the memory
unregistering the memory listener at vhost_vdpa_dev_start( started =
false), but the backend acknowledging this feature flag allows QEMU to
make sure it is safe to skip this unmap & map in the case of vhost stop
& start cycle.
In that sense, this feature flag is actually a signal for userspace to
know that the driver bug has been solved. Not offering it indicates that
userspace cannot trust the kernel will retain the maps.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-4-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Devices with on-chip IOMMU or vendor specific IOTLB implementation may
need to restore iotlb mapping to the initial or default state using the
.reset_map op, as it's desirable for some parent devices to not work
with DMA ops and maintain a simple IOMMU model with .reset_map. In
particular, device reset should not cause mapping to go away on such
IOTLB model, so persistent mapping is implied across reset. Before the
userspace process using vhost-vdpa is gone, give it a chance to reset
iotlb back to the initial state in vhost_vdpa_cleanup().
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1697880319-4937-3-git-send-email-si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Fix a misspelling of "preceding".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Message-Id: <b57b882675809f1f9dacbf42cf6b920b2bea9cba.1695903476.git.geert+renesas@glider.be>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
With _F_DESC_ASID backend feature, the device can now support the
VHOST_VDPA_GET_VRING_DESC_GROUP ioctl, and it may expose the descriptor
table (including avail and used ring) in a different group than the
buffers it contains. This new uAPI will fetch the group ID of the
descriptor table.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Userspace knows if the device has dedicated descriptor group or not
by checking this feature bit.
It's only exposed if the vdpa driver backend implements the
.get_vq_desc_group() operation callback. Userspace trying to negotiate
this feature when it or the dependent _F_IOTLB_ASID feature hasn't
been exposed will result in an error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20231018171456.1624030-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mac80211/rx.c
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Adjacent changes:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c
61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void")
d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF")
net/vmw_vsock/virtio_transport.c
64c99d2d6ada ("vsock/virtio: support to send non-linear skb")
53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb
entries") Forbade vhost iotlb msg with null size to prevent entries
with size = start = 0 and last = ULONG_MAX to end up in the iotlb.
Then commit 95932ab2ea07 ("vhost: allow batching hint without size")
only applied the check for VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE
message types to fix a regression observed with batching hit.
Still, the introduction of that check introduced a regression for
some users attempting to invalidate the whole ULONG_MAX range by
setting the size to 0. This is the case with qemu/smmuv3/vhost
integration which does not work anymore. It Looks safe to partially
revert the original commit and allow VHOST_IOTLB_INVALIDATE messages
with null size. vhost_iotlb_del_range() will compute a correct end
iova. Same for vhost_vdpa_iotlb_unmap().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries")
Cc: stable@vger.kernel.org # v5.17+
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230927140544.205088-1-eric.auger@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add 'msgzerocopy_allow()' callback for vhost transport.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows userspace to request the fabric drivers do direct submissions
if they support it. With the new device file, submit_type, users can
write 0 - 2 to control how commands are submitted to the backend:
0 - TARGET_FABRIC_DEFAULT_SUBMIT - LIO will use the fabric's default
submission type. This is the default for compat.
1 - TARGET_DIRECT_SUBMIT - LIO will submit the cmd to the backend from the
calling context if the fabric the cmd was received on supports it,
else it will use the fabric's default type.
2 - TARGET_QUEUE_SUBMIT - LIO will queue the cmd to the LIO submission
workqueue which will pass it to the backend.
When using an NVMe drive and vhost-scsi with direct submission we see
around a 20% improvement in 4K I/Os:
fio jobs 1 2 4 8 10
--------------------------------------------------
defer 94K 190K 394K 770K 890K
direct 128K 252K 488K 950K -
And when using the queueing mode, we now no longer see issues like where
the iSCSI tx thread is blocked in the block layer waiting on a tag so it
can't respond to a nop or perform I/Os for other LUs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-6-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In some cases, like with multiple LUN targets or where the target has to
respond to transport level requests from the receiving context it can be
better to defer cmd submission to a helper thread. If the backend driver
blocks on something like request/tag allocation it can block the entire
target submission path and other LUs and transport IO on that session.
In other cases like single LUN targets with storage that can support all
the commands that the target can queue, then it's best to submit the cmd
to the backend from the target's cmd receiving context.
Subsequent commits will allow the user to config what they prefer, but
drivers like loop can't directly submit because they can be called from a
context that can't sleep. And, drivers like vhost-scsi can support direct
submission, but need to keep their default behavior of deferring execution
to avoid possible regressions where the backend can block.
Make the drivers tell LIO core if they support direct submissions and their
current default, so we can prevent users from misconfiguring the system and
initialize devices correctly.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (or adjacent changes of note).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the while loop of vringh_iov_xfer(), `partlen` could be 0 if one of
the `iov` has 0 lenght.
In this case, we should skip the iov and go to the next one.
But calling vringh_kiov_advance() with 0 lenght does not cause the
advancement, since it returns immediately if asked to advance by 0 bytes.
Let's restore the code that was there before commit b8c06ad4d67d
("vringh: implement vringh_kiov_advance()"), avoiding using
vringh_kiov_advance().
Fixes: b8c06ad4d67d ("vringh: implement vringh_kiov_advance()")
Cc: stable@vger.kernel.org
Reported-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is preparation patch for MSG_ZEROCOPY support. It adds handling of
non-linear skbs by replacing direct calls of 'memcpy_to_msg()' with
'skb_copy_datagram_iter()'. Main advantage of the second one is that it
can handle paged part of the skb by using 'kmap()' on each page, but if
there are no pages in the skb, it behaves like simple copying to iov
iterator. This patch also adds new field to the control block of skb -
this value shows current offset in the skb to read next portion of data
(it doesn't matter linear it or not). Idea behind this field is that
'skb_copy_datagram_iter()' handles both types of skb internally - it
just needs an offset from which to copy data from the given skb. This
offset is incremented on each read from skb. This approach allows to
simplify handling of both linear and non-linear skbs, because for
linear skb we need to call 'skb_pull()' after reading data from it,
while in non-linear case we need to update 'data_len'.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This operation allow vdpa parent to expose its own backend feature bits.
Next patches introduce a feature not compatible with all parent drivers:
the ability to enable vq after driver_ok. Each parent must declare if
it allows it or not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-4-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Accepting VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature if
userland sets it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230609092127.170673-3-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Rename vhost_scsi_iov_to_sgl to vhost_scsi_map_iov_to_sgl so it matches
matches the naming style used for vhost_scsi_copy_iov_to_sgl.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230709202859.138387-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The linux block layer requires bios/requests to have lengths with a 512
byte alignment. Some drivers/layers like dm-crypt and the directi IO code
will test for it and just fail. Other drivers like SCSI just assume the
requirement is met and will end up in infinte retry loops. The problem
for drivers like SCSI is that it uses functions like blk_rq_cur_sectors
and blk_rq_sectors which divide the request's length by 512. If there's
lefovers then it just gets dropped. But other code in the block/scsi
layer may use blk_rq_bytes/blk_rq_cur_bytes and end up thinking there is
still data left and try to retry the cmd. We can then end up getting
stuck in retry loops where part of the block/scsi thinks there is data
left, but other parts think we want to do IOs of zero length.
Linux will always check for alignment, but windows will not. When
vhost-scsi then translates the iovec it gets from a windows guest to a
scatterlist, we can end up with sg items where the sg->length is not
divisible by 512 due to the misaligned offset:
sg[0].offset = 255;
sg[0].length = 3841;
sg...
sg[N].offset = 0;
sg[N].length = 255;
When the lio backends then convert the SG to bios or other iovecs, we
end up sending them with the same misaligned values and can hit the
issues above.
This just has us drop down to allocating a temp page and copying the data
when we detect a misaligned buffer and the IO is large enough that it
will get split into multiple bad IOs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230709202859.138387-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Pull virtio updates from Michael Tsirkin:
- resume support in vdpa/solidrun
- structure size optimizations in virtio_pci
- new pds_vdpa driver
- immediate initialization mechanism for vdpa/ifcvf
- interrupt bypass for vdpa/mlx5
- multiple worker support for vhost
- viirtio net in Intel F2000X-PL support for vdpa/ifcvf
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
vhost: Make parameter name match of vhost_get_vq_desc()
vduse: fix NULL pointer dereference
vhost: Allow worker switching while work is queueing
vhost_scsi: add support for worker ioctls
vhost: allow userspace to create workers
vhost: replace single worker pointer with xarray
vhost: add helper to parse userspace vring state/file
vhost: remove vhost_work_queue
vhost_scsi: flush IO vqs then send TMF rsp
vhost_scsi: convert to vhost_vq_work_queue
vhost_scsi: make SCSI cmd completion per vq
vhost_sock: convert to vhost_vq_work_queue
vhost: convert poll work to be vq based
vhost: take worker or vq for flushing
vhost: take worker or vq instead of dev for queueing
vhost, vhost_net: add helper to check if vq has work
vhost: add vhost_worker pointer to vhost_virtqueue
vhost: dynamically allocate vhost_worker
vhost: create worker at end of vhost_dev_set_owner
virtio_bt: call scheduler when we free unused buffs
...
|
|
The parameter name in the function declaration and definition
should be the same.
drivers/vhost/vhost.h,
int vhost_get_vq_desc(..., unsigned int iov_count,...);
drivers/vhost/vhost.c,
int vhost_get_vq_desc(..., unsigned int iov_size,...)
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230621093835.36878-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch drops the requirement that we can only switch workers if work
has not been queued by using RCU for the vq based queueing paths and a
mutex for the device wide flush.
We can also use this to support SIGKILL properly in the future where we
should exit almost immediately after getting that signal. With this
patch, when get_signal returns true, we can set the vq->worker to NULL
and do a synchronize_rcu to prevent new work from being queued to the
vhost_task that has been killed.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-18-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This has vhost-scsi support the worker ioctls by calling the
vhost_worker_ioctl helper.
With a single worker, the single thread becomes a bottlneck when trying
to use 3 or more virtqueues like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=3
With the patches and doing a worker per vq, we can scale to at least
16 vCPUs/vqs (that's my system limit) with the same command fio command
above with numjobs=16:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64 --numjobs=16
which gives around 2002K IOPs.
Note that for testing I dropped depth to 64 above because the vhost/virt
layer supports only 1024 total commands per device. And the only tuning I
did was set LIO's emulate_pr to 0 to avoid LIO's PR lock in the main IO
path which becomes an issue at around 12 jobs/virtqueues.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-17-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For vhost-scsi with 3 vqs or more and a workload that tries to use
them in parallel like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=3
the single vhost worker thread will become a bottlneck and we are stuck
at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are
used.
To better utilize virtqueues and available CPUs, this patch allows
userspace to create workers and bind them to vqs. You can have N workers
per dev and also share N workers with M vqs on that dev.
This patch adds the interface related code and the next patch will hook
vhost-scsi into it. The patches do not try to hook net and vsock into
the interface because:
1. multiple workers don't seem to help vsock. The problem is that with
only 2 virtqueues we never fully use the existing worker when doing
bidirectional tests. This seems to match vhost-scsi where we don't see
the worker as a bottleneck until 3 virtqueues are used.
2. net already has a way to use multiple workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-16-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The next patch allows userspace to create multiple workers per device,
so this patch replaces the vhost_worker pointer with an xarray so we
can store mupltiple workers and look them up.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-15-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The next patches add new vhost worker ioctls which will need to get a
vhost_virtqueue from a userspace struct which specifies the vq's index.
This moves the vhost_vring_ioctl code to do this to a helper so it can
be shared.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-14-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_work_queue is no longer used. Each driver is using the poll or vq
based queueing, so remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-13-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With one worker we will always send the scsi cmd responses then send the
TMF rsp, because LIO will always complete the scsi cmds first then call
into us to send the TMF response.
With multiple workers, the IO vq workers could be running while the
TMF/ctl vq worker is running so this has us do a flush before completing
the TMF to make sure cmds are completed when it's work is later queued
and run.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-12-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert from vhost_work_queue to vhost_vq_work_queue so we can
remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-11-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch separates the scsi cmd completion code paths so we can complete
cmds based on their vq instead of having all cmds complete on the same
worker/CPU. This will be useful with the next patches that allow us to
create mulitple worker threads and bind them to different vqs, and we can
have completions running on different threads/CPUs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230626232307.97930-10-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert from vhost_work_queue to vhost_vq_work_queue, so we can drop
vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-9-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This has the drivers pass in their poll to vq mapping and then converts
the core poll code to use the vq based helpers. In the next patches we
will allow vqs to be handled by different workers, so to allow drivers
to execute operations like queue, stop, flush, etc on specific polls/vqs
we need to know the mappings.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-8-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch has the core work flush function take a worker. When we
support multiple workers we can then flush each worker during device
removal, stoppage, etc. It also adds a helper to flush specific
virtqueues, so vhost-scsi can flush IO vqs from it's ctl vq.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-7-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
