summaryrefslogtreecommitdiff
path: root/drivers/vhost
AgeCommit message (Collapse)Author
2020-02-22vhost: Check docket sk_family instead of call getnameEugenio Pérez
Doing so, we save one call to get data we already have in the struct. Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro). Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...
2019-12-07vhost/vsock: accept only packets with the right dst_cidStefano Garzarella
When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04vhost, kcov: collect coverage from vhost_workerAndrey Konovalov
Add kcov_remote_start()/kcov_remote_stop() annotations to the vhost_worker() function, which is responsible for processing vhost works. Since vhost_worker() threads are spawned per vhost device instance the common kcov handle is used for kcov_remote_start()/stop() annotations (see Documentation/dev-tools/kcov.rst for details). As the result kcov can now be used to collect coverage from vhost worker threads. Link: http://lkml.kernel.org/r/e49d5d154e5da6c9ada521d2b7ce10a49ce9f98b.1572366574.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Alexander Potapenko <glider@google.com> Cc: Anders Roxell <anders.roxell@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Windsor <dwindsor@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Marco Elver <elver@google.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-14vhost/vsock: refuse CID assigned to the guest->host transportStefano Garzarella
In a nested VM environment, we have to refuse to assign to a nested guest the same CID assigned to our guest->host transport. In this way, the user can use the local CID for loopback. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: prevent transport modules unloadingStefano Garzarella
This patch adds 'module' member in the 'struct vsock_transport' in order to get/put the transport module. This prevents the module unloading while sockets are assigned to it. We increase the module refcnt when a socket is assigned to a transport, and we decrease the module refcnt when the socket is destructed. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: add multi-transports supportStefano Garzarella
This patch adds the support of multiple transports in the VSOCK core. With the multi-transports support, we can use vsock with nested VMs (using also different hypervisors) loading both guest->host and host->guest transports at the same time. Major changes: - vsock core module can be loaded regardless of the transports - vsock_core_init() and vsock_core_exit() are renamed to vsock_core_register() and vsock_core_unregister() - vsock_core_register() has a feature parameter (H2G, G2H, DGRAM) to identify which directions the transport can handle and if it's support DGRAM (only vmci) - each stream socket is assigned to a transport when the remote CID is set (during the connect() or when we receive a connection request on a listener socket). The remote CID is used to decide which transport to use: - remote CID <= VMADDR_CID_HOST will use guest->host transport; - remote CID == local_cid (guest->host transport) will use guest->host transport for loopback (host->guest transports don't support loopback); - remote CID > VMADDR_CID_HOST will use host->guest transport; - listener sockets are not bound to any transports since no transport operations are done on it. In this way we can create a listener socket, also if the transports are not loaded or with VMADDR_CID_ANY to listen on all transports. - DGRAM sockets are handled as before, since only the vmci_transport provides this feature. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock: handle buffer_size sockopts in the coreStefano Garzarella
virtio_transport and vmci_transport handle the buffer_size sockopts in a very similar way. In order to support multiple transports, this patch moves this handling in the core to allow the user to change the options also if the socket is not yet assigned to any transport. This patch also adds the '.notify_buffer_size' callback in the 'struct virtio_transport' in order to inform the transport, when the buffer_size is changed by the user. It is also useful to limit the 'buffer_size' requested (e.g. virtio transports). Acked-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()Stefano Garzarella
We are going to add 'struct vsock_sock *' parameter to virtio_transport_get_ops(). In some cases, like in the virtio_transport_reset_no_sock(), we don't have any socket assigned to the packet received, so we can't use the virtio_transport_get_ops(). In order to allow virtio_transport_reset_no_sock() to use the '.send_pkt' callback from the 'vhost_transport' or 'virtio_transport', we add the 'struct virtio_transport *' to it and to its caller: virtio_transport_recv_pkt(). We moved the 'vhost_transport' and 'virtio_transport' definition, to pass their address to the virtio_transport_recv_pkt(). Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28vringh: fix copy direction of vringh_iov_push_kern()Jason Wang
We want to copy from iov to buf, so the direction was wrong. Note: no real user for the helper, but it will be used by future features. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-23compat_ioctl: move drivers to compat_ptr_ioctlArnd Bergmann
Each of these drivers has a copy of the same trivial helper function to convert the pointer argument and then call the native ioctl handler. We now have a generic implementation of that, so use it. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-13vhost/test: stop device before resetMichael S. Tsirkin
When device stop was moved out of reset, test device wasn't updated to stop before reset, this resulted in a use after free. Fix by invoking stop appropriately. Fixes: b211616d7125 ("vhost: move -net specific code out") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-14Revert "vhost: block speculation of translated descriptors"Michael S. Tsirkin
This reverts commit a89db445fbd7f1f8457b03759aa7343fa530ef6b. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-11vhost: make sure log_num < in_numyongduan
The code assumes log_num < in_num everywhere, and that is true as long as in_num is incremented by descriptor iov count, and log_num by 1. However this breaks if there's a zero sized descriptor. As a result, if a malicious guest creates a vring desc with desc.len = 0, it may cause the host kernel to crash by overflowing the log array. This bug can be triggered during the VM migration. There's no need to log when desc.len = 0, so just don't increment log_num in this case. Fixes: 3a4d5c94e959 ("vhost_net: a kernel-level virtio server") Cc: stable@vger.kernel.org Reviewed-by: Lidong Chen <lidongchen@tencent.com> Signed-off-by: ruippan <ruippan@tencent.com> Signed-off-by: yongduan <yongduan@tencent.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-11vhost: block speculation of translated descriptorsMichael S. Tsirkin
iovec addresses coming from vhost are assumed to be pre-validated, but in fact can be speculated to a value out of range. Userspace address are later validated with array_index_nospec so we can be sure kernel info does not leak through these addresses, but vhost must also not leak userspace info outside the allowed memory table to guests. Following the defence in depth principle, make sure the address is not validated out of node range. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com>
2019-09-04Revert "vhost: access vq metadata through kernel virtual address"Michael S. Tsirkin
This reverts commit 7f466032dc ("vhost: access vq metadata through kernel virtual address"). The commit caused a bunch of issues, and while commit 73f628ec9e ("vhost: disable metadata prefetch optimization") disabled the optimization it's not nice to keep lots of dead code around. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-04vhost: Remove unnecessary variableYunsheng Lin
It is unnecessary to use ret variable to return the error code, just return the error code directly. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-04vhost/test: fix build for vhost testTiwei Bie
Since vhost_exceeds_weight() was introduced, callers need to specify the packet weight and byte weight in vhost_dev_init(). Note that, the packet weight isn't counted in this patch to keep the original behavior unchanged. Fixes: e82b9b0727ff ("vhost: introduce vhost_exceeds_weight()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2019-09-04vhost/test: fix build for vhost testTiwei Bie
Since below commit, callers need to specify the iov_limit in vhost_dev_init() explicitly. Fixes: b46a0bf78ad7 ("vhost: fix OOB in get_rx_bufs()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30vhost/vsock: split packets to send using multiple buffersStefano Garzarella
If the packets to sent to the guest are bigger than the buffer available, we can split them, using multiple buffers and fixing the length in the packet header. This is safe since virtio-vsock supports only stream sockets. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30vsock/virtio: limit the memory used per-socketStefano Garzarella
Since virtio-vsock was introduced, the buffers filled by the host and pushed to the guest using the vring, are directly queued in a per-socket list. These buffers are preallocated by the guest with a fixed size (4 KB). The maximum amount of memory used by each socket should be controlled by the credit mechanism. The default credit available per-socket is 256 KB, but if we use only 1 byte per packet, the guest can queue up to 262144 of 4 KB buffers, using up to 1 GB of memory per-socket. In addition, the guest will continue to fill the vring with new 4 KB free buffers to avoid starvation of other sockets. This patch mitigates this issue copying the payload of small packets (< 128 bytes) into the buffer of last packet queued, in order to avoid wasting memory. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-26vhost: disable metadata prefetch optimizationMichael S. Tsirkin
This seems to cause guest and host memory corruption. Disable for now until we get a better handle on that. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-17Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio, vhost updates from Michael Tsirkin: "Fixes, features, performance: - new iommu device - vhost guest memory access using vmap (just meta-data for now) - minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mmio: add error check for platform_get_irq scsi: virtio_scsi: Use struct_size() helper iommu/virtio: Add event queue iommu/virtio: Add probe request iommu: Add virtio-iommu driver PCI: OF: Initialize dev->fwnode appropriately of: Allow the iommu-map property to omit untranslated devices dt-bindings: virtio: Add virtio-pci-iommu node dt-bindings: virtio-mmio: Add IOMMU description vhost: fix clang build warning vhost: access vq metadata through kernel virtual address vhost: factor out setting vring addr and num vhost: introduce helpers to get the size of metadata area vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() vhost: fine grain userspace memory accessors vhost: generalize adding used elem
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 482Thomas Gleixner
Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 48 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-17vhost_net: disable zerocopy by defaultJason Wang
Vhost_net was known to suffer from HOL[1] issues which is not easy to fix. Several downstream disable the feature by default. What's more, the datapath was split and datacopy path got the support of batching and XDP support recently which makes it faster than zerocopy part for small packets transmission. It looks to me that disable zerocopy by default is more appropriate. It cold be enabled by default again in the future if we fix the above issues. [1] https://patchwork.kernel.org/patch/3787671/ Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge tag 'v5.2-rc4' into mauroJonathan Corbet
We need to pick up post-rc1 changes to various document files so they don't get lost in Mauro's massive RST conversion push.
2019-06-08docs: fix broken documentation linksMauro Carvalho Chehab
Mostly due to x86 and acpi conversion, several documentation links are still pointing to the old file. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-06vhost: fix clang build warningMichael S. Tsirkin
Clang warns: drivers/vhost/vhost.c:2085:5: warning: macro expansion producing 'defined' has undefined behavior [-Wexpansion-to-defined] #if VHOST_ARCH_CAN_ACCEL_UACCESS ^ drivers/vhost/vhost.h:98:38: note: expanded from macro 'VHOST_ARCH_CAN_ACCEL_UACCESS' #define VHOST_ARCH_CAN_ACCEL_UACCESS defined(CONFIG_MMU_NOTIFIER) && \ ^ It's being pedantic for the sake of portability, but the fix is easy enough. Rework the definition of VHOST_ARCH_CAN_ACCEL_UACCESS to expand to a constant. Fixes: 7f466032dc9e ("vhost: access vq metadata through kernel virtual address") Link: https://github.com/ClangBuiltLinux/linux/issues/508 Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com>
2019-06-05vhost: access vq metadata through kernel virtual addressJason Wang
It was noticed that the copy_to/from_user() friends that was used to access virtqueue metdata tends to be very expensive for dataplane implementation like vhost since it involves lots of software checks, speculation barriers, hardware feature toggling (e.g SMAP). The extra cost will be more obvious when transferring small packets since the time spent on metadata accessing become more significant. This patch tries to eliminate those overheads by accessing them through direct mapping of those pages. Invalidation callbacks is implemented for co-operation with general VM management (swap, KSM, THP or NUMA balancing). We will try to get the direct mapping of vq metadata before each round of packet processing if it doesn't exist. If we fail, we will simplely fallback to copy_to/from_user() friends. This invalidation and direct mapping access are synchronized through spinlock and RCU. All matedata accessing through direct map is protected by RCU, and the setup or invalidation are done under spinlock. This method might does not work for high mem page which requires temporary mapping so we just fallback to normal copy_to/from_user() and may not for arch that has virtual tagged cache since extra cache flushing is needed to eliminate the alias. This will result complex logic and bad performance. For those archs, this patch simply go for copy_to/from_user() friends. This is done by ruling out kernel mapping codes through ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE. Note that this is only done when device IOTLB is not enabled. We could use similar method to optimize IOTLB in the future. Tests shows at most about 23% improvement on TX PPS when using virtio-user + vhost_net + xdp1 + TAP on 2.6GHz Broadwell: SMAP on | SMAP off Before: 5.2Mpps | 7.1Mpps After: 6.4Mpps | 8.2Mpps Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Jerome Glisse <jglisse@redhat.com> Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: factor out setting vring addr and numJason Wang
Factoring vring address and num setting which needs special care for accelerating vq metadata accessing. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: introduce helpers to get the size of metadata areaJason Wang
To avoid code duplication since it will be used by kernel VA prefetching. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()Jason Wang
Rename the function to be more accurate since it actually tries to prefetch vq metadata address in IOTLB. And this will be used by following patch to prefetch metadata virtual addresses. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: fine grain userspace memory accessorsJason Wang
This is used to hide the metadata address from virtqueue helpers. This will allow to implement a vmap based fast accessing to metadata. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-06-05vhost: generalize adding used elemJason Wang
Use one generic vhost_copy_to_user() instead of two dedicated accessor. This will simplify the conversion to fine grain accessors. About 2% improvement of PPS were seen during vitio-user txonly test. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost: scsi: add weight supportJason Wang
This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing scsi kthread from hogging cpu which is guest triggerable. This addresses CVE-2019-3900. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-05-27vhost: vsock: add weight supportJason Wang
This patch will check the weight and exit the loop if we exceeds the weight. This is useful for preventing vsock kthread from hogging cpu which is guest triggerable. The weight can help to avoid starving the request from on direction while another direction is being processed. The value of weight is picked from vhost-net. This addresses CVE-2019-3900. Cc: Stefan Hajnoczi <stefanha@redhat.com> Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost_net: fix possible infinite loopJason Wang
When the rx buffer is too small for a packet, we will discard the vq descriptor and retry it for the next packet: while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk, &busyloop_intr))) { ... /* On overrun, truncate and discard */ if (unlikely(headcount > UIO_MAXIOV)) { iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1); err = sock->ops->recvmsg(sock, &msg, 1, MSG_DONTWAIT | MSG_TRUNC); pr_debug("Discarded rx packet: len %zd\n", sock_len); continue; } ... } This makes it possible to trigger a infinite while..continue loop through the co-opreation of two VMs like: 1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the vhost process as much as possible e.g using indirect descriptors or other. 2) Malicious VM2 generate packets to VM1 as fast as possible Fixing this by checking against weight at the end of RX and TX loop. This also eliminate other similar cases when: - userspace is consuming the packets in the meanwhile - theoretical TOCTOU attack if guest moving avail index back and forth to hit the continue after vhost find guest just add new buffers This addresses CVE-2019-3900. Fixes: d8316f3991d20 ("vhost: fix total length when packets are too short") Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-27vhost: introduce vhost_exceeds_weight()Jason Wang
We used to have vhost_exceeds_weight() for vhost-net to: - prevent vhost kthread from hogging the cpu - balance the time spent between TX and RX This function could be useful for vsock and scsi as well. So move it to vhost.c. Device must specify a weight which counts the number of requests, or it can also specific a byte_weight which counts the number of bytes that has been processed. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - enable packed ring support for s390 - several fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: enable packed ring virtio/s390: DMA support for virtio-ccw virtio/s390: use vring_create_virtqueue virtio/virtio_ring: do some comment fixes vhost-scsi: remove incorrect memory barrier tools/virtio/ringtest: Remove bogus definition of BUG_ON() virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-12vhost-scsi: remove incorrect memory barrierPaolo Bonzini
At this point, vs_tpg is not public at all; tv_tpg_vhost_count is accessed under tpg->tv_tpg_mutex; tpg->vhost_scsi is accessed under vhost_scsi_mutex. Therefor there are no atomic operations involved at all here, just remove the barrier. Reported-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2019-04-10vhost: reject zero size iova rangeJason Wang
We used to accept zero size iova range which will lead a infinite loop in translate_desc(). Fixing this by failing the request in this case. Reported-by: syzbot+d21e6e297322a900c128@syzkaller.appspotmail.com Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>