summaryrefslogtreecommitdiff
path: root/drivers/video/backlight
AgeCommit message (Collapse)Author
2021-10-20video: backlight: ili9320: Make ili9320_remove() return voidUwe Kleine-König
Up to now ili9320_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of spi remove callbacks is ignored anyway. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211019120927.3822792-1-u.kleine-koenig@pengutronix.de
2021-09-23backlight: Propagate errors from get_brightness()Thomas Weißschuh
backlight.h documents "struct backlight_ops->get_brightness()" to return a negative errno on failure. So far these errors have not been handled in the backlight core. This leads to negative values being exposed through sysfs although only positive values are documented to be reported. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-09-22video: backlight: Drop maximum brightness override for brightness zeroMarek Vasut
The note in c2adda27d202f ("video: backlight: Add of_find_backlight helper in backlight.c") says that gpio-backlight uses brightness as power state. This has been fixed since in ec665b756e6f7 ("backlight: gpio-backlight: Correct initial power state handling") and other backlight drivers do not require this workaround. Drop the workaround. This fixes the case where e.g. pwm-backlight can perfectly well be set to brightness 0 on boot in DT, which without this patch leads to the display brightness to be max instead of off. Fixes: c2adda27d202f ("video: backlight: Add of_find_backlight helper in backlight.c") Cc: <stable@vger.kernel.org> # 5.4+ Cc: <stable@vger.kernel.org> # 4.19.x: ec665b756e6f7: backlight: gpio-backlight: Correct initial power state handling Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-08-19backlight: pwm_bl: Improve bootloader/kernel device handoverDaniel Thompson
Currently there are (at least) two problems in the way pwm_bl starts managing the enable_gpio pin. Both occur when the backlight is initially off and the driver finds the pin not already in output mode and, as a result, unconditionally switches it to output-mode and asserts the signal. Problem 1: This could cause the backlight to flicker since, at this stage in driver initialisation, we have no idea what the PWM and regulator are doing (an unconfigured PWM could easily "rest" at 100% duty cycle). Problem 2: This will cause us not to correctly honour the post_pwm_on_delay (which also risks flickers). Fix this by moving the code to configure the GPIO output mode until after we have examines the handover state. That allows us to initialize enable_gpio to off if the backlight is currently off and on if the backlight is on. Cc: stable@vger.kernel.org Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-07-21backlight: ktd253: Stabilize backlightLinus Walleij
Remove interrupt disablement during backlight setting. It is way to dangerous and makes platforms instable by having it miss vblank IRQs leading to the graphics derailing. The code is using ndelay() which is not available on platforms such as ARM and will result in 32 * udelay(1) which is substantial. Add some code to detect if an interrupt occurs during the tight loop and in that case just redo it from the top. Fixes: 5317f37e48b9 ("backlight: Add Kinetic KTD253 backlight driver") Cc: Stephan Gerhold <stephan@gerhold.net> Reported-by: newbyte@disroot.org Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-22backlight: lm3630a: Convert to atomic PWM API and check for errorsUwe Kleine-König
The practical upside here is that this only needs a single API call to program the hardware which (depending on the underlaying hardware) can be more effective and prevents glitches. Up to now the return value of the pwm functions was ignored. Fix this and propagate the error to the caller. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-22backlight: lm3630a: Fix return code of .update_status() callbackUwe Kleine-König
According to <linux/backlight.h> .update_status() is supposed to return 0 on success and a negative error code otherwise. Adapt lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to actually do it. While touching that also add the error code to the failure message. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-01backlight: Kconfig whitespace and indentation cleanupsJuerg Haefliger
Remove leading whitespaces, replace multi spaces with tabs, and fix help text indentation. Signed-off-by: Juerg Haefliger <juergh@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-27video: backlight: qcom-wled: Add PMI8994 compatibleKonrad Dybcio
Add a compatible for PMI8994 WLED. It uses the V4 of WLED IP. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-19backlight: rt4831: Adds support for Richtek RT4831 backlightChiYuan Huang
Adds support for Richtek RT4831 backlight. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-19backlight: lm3630a_bl: Put fwnode in error case during ->probe()Andy Shevchenko
device_for_each_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller. Cc: Brian Masney <masneyb@onstation.org> Cc: Dan Murphy <dmurphy@ti.com> Fixes: 8fbce8efe15cd ("backlight: lm3630a: Add firmware node support") Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-23backlight: journada720: Fix Wmisleading-indentation warningArnd Bergmann
With gcc-11, we get a warning about code that looks correct but badly indented: drivers/video/backlight/jornada720_bl.c: In function ‘jornada_bl_update_status’: drivers/video/backlight/jornada720_bl.c:66:11: error: this ‘else’ clause does not guard... [-Werror=misleading-indentation] 66 | } else /* turn on backlight */ | ^~~~ Change the formatting according to our normal conventions. Fixes: 13a7b5dc0d17 ("backlight: Adds HP Jornada 700 series backlight driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-23backlight: qcom-wled: Correct the sync_toggle sequenceKiran Gunda
As per the current implementation, after FSC (Full Scale Current) and brightness update the sync bits are set-then-cleared. But, the FSC and brightness sync takes place when the sync bits are set (e.g. on a rising edge). So the hardware team recommends a clear-then-set approach in order to guarantee such a transition regardless of the previous register state. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-22backlight: qcom-wled: Fix FSC update issue for WLED5Kiran Gunda
Currently, for WLED5, the FSC (Full scale current) setting is not updated properly due to driver toggling the wrong register after an FSC update. On WLED5 we should only toggle the MOD_SYNC bit after a brightness update. For an FSC update we need to toggle the SYNC bits instead. Fix it by adopting the common wled3_sync_toggle() for WLED5 and introducing new code to the brightness update path to compensate. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-22backlight: ktd253: Support KTD259Linus Walleij
The KTD259 works just like KTD253 so add this compatible to the driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-03-22backlight: qcom-wled: Use sink_addr for sync toggleObeida Shamoun
WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset. Therefore, use the sink address as base instead of the ctrl address. This fixes the sync toggle on wled4, which can be observed by the fact that adjusting brightness now works. It has no effect on wled3 because sink and ctrl base addresses are the same. This allows adjusting the brightness without having to disable then reenable the module. Signed-off-by: Obeida Shamoun <oshmoun100@googlemail.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-02-22Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-12backlight/video: Use Platform getter/setter functionsJulia Lawall
Use getter and setter functions, for platform_device structures and a spi_device structure. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-02-09backlight: ktd253: Bring up in a known stateLinus Walleij
The KTD253 backlight might already be on when the driver is probed: then we don't really know what the current ratio is and all light intensity settings will be off relative to what it was at boot. To fix this, bring up the backlight OFF then move it to the default backlight from there so we know the state. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-02-01ARM: 9049/1: locomo: make locomo bus's remove callback return voidUwe Kleine-König
The driver core ignores the return value of struct bus_type::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct locomo_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-01-20backlight: sky81452-backlight: Convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-01-20backlight: lms283gf05: Convert to GPIO descriptorsLinus Walleij
This converts the lms283gf05 backlight driver to use GPIO descriptors and switches the single PXA Palm Z2 device over to defining these. Since the platform data was only used to convey GPIO information we can delete the platform data header. Notice that we define the proper active low semantics in the board file GPIO descriptor table (active low) and assert the reset line by bringing it to "1" (asserted). Cc: Marek Vasut <marex@denx.de> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Mack <daniel@zonque.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-04backlight: pwm_bl: Fix interpolationAlexandru Stan
The previous behavior was a little unexpected, its properties/problems: 1. It was designed to generate strictly increasing values (no repeats) 2. It had quantization errors when calculating step size. Resulting in unexpected jumps near the end of some segments. Example settings: brightness-levels = <0 1 2 4 8 16 32 64 128 256>; num-interpolated-steps = <16>; Whenever num-interpolated-steps was larger than the distance between 2 consecutive brightness levels the table would get really discontinuous. The slope of the interpolation would stick with integers only and if it was 0 the whole line segment would get skipped. The distances between 1 2 4 and 8 would be 1 (property #1 fighting us), and only starting with 16 it would start to interpolate properly. Property #1 is not enough. The goal here is more than just monotonically increasing. We should still care about the shape of the curve. Repeated points might be desired if we're in the part of the curve where we want to go slow (aka slope near 0). Problem #2 is plainly a bug. Imagine if the 64 entry was 63 instead, the calculated slope on the 32-63 segment will be almost half as it should be. The most expected and simplest algorithm for interpolation is linear interpolation, which would handle both problems. Let's just implement that! Take pairs of points from the brightness-levels array and linearly interpolate between them. On the X axis (what userspace sees) we'll now have equally sized intervals (num-interpolated-steps sized, as opposed to before where we were at the mercy of quantization). Signed-off-by: Alexandru Stan <amstan@chromium.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-10-14Merge tag 'backlight-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "New Drivers: - Add support for KTD253 Fix-ups: - Add Device Tree documentation; common, kinetic,ktd253 - Use correct header(s); tosa_lcd, tosa_bl Bug Fixes: - Fix refcount imbalance; sky81452-backlight" * tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: tosa_bl: Include the right header backlight: tosa_lcd: Include the right header backlight: Add Kinetic KTD253 backlight driver dt-bindings: backlight: Add Kinetic KTD253 bindings dt-bindings: backlight: Add some common backlight properties backlight: sky81452-backlight: Fix refcount imbalance on error
2020-09-08backlight: tosa_bl: Include the right headerLinus Walleij
The Tosa backlight driver was converted to use GPIO descriptors in 0b0cb52bd80eda76c4b9921f5cf9c1b709d44e83 ("video: backlight: tosa: Use GPIO lookup table") but still includes <linux/gpio.h> rather than <linux/gpio/consumer.h>. Fix it. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-08backlight: tosa_lcd: Include the right headerLinus Walleij
The Tosa backlight LCDE driver was converted to use GPIO descriptors in 0b0cb52bd80eda76c4b9921f5cf9c1b709d44e83 ("video: backlight: tosa: Use GPIO lookup table") but still includes <linux/gpio.h> rather than <linux/gpio/consumer.h>. Fix it. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-28backlight: Add Kinetic KTD253 backlight driverLinus Walleij
The Kinetic KTD253 backlight driver is controlled with a single GPIO line, but still supports a range of brightness settings by sending fast pulses on the line. This is based off the source code release for the Samsung GT-S7710 mobile phone. Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-28backlight: sky81452-backlight: Fix refcount imbalance on errordinghao.liu@zju.edu.cn
When of_property_read_u32_array() returns an error code, a pairing refcount decrement is needed to keep np's refcount balanced. Fixes: f705806c9f355 ("backlight: Add support Skyworks SKY81452 backlight driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-14Merge tag 'pwm/for-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The majority of this batch is conversion of the PWM period and duty cycle to 64-bit unsigned integers, which is required so that some types of hardware can generate the full range of signals that they're capable of. The remainder is mostly minor fixes and cleanups" * tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: bcm-iproc: handle clk_get_rate() return pwm: Replace HTTP links with HTTPS ones pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header pwm: mediatek: Provide missing kerneldoc description for 'soc' arg pwm: bcm-kona: Remove impossible comparison when validating duty cycle pwm: bcm-iproc: Remove impossible comparison when validating duty cycle pwm: iqs620a: Use lowercase hexadecimal literals for consistency pwm: Convert period and duty cycle to u64 clk: pwm: Use 64-bit division function backlight: pwm_bl: Use 64-bit division function pwm: sun4i: Use nsecs_to_jiffies to avoid a division pwm: sifive: Use 64-bit division macro pwm: iqs620a: Use 64-bit division pwm: imx27: Use 64-bit division macro pwm: imx-tpm: Use 64-bit division macro pwm: clps711x: Use 64-bit division macro hwmon: pwm-fan: Use 64-bit division macro drm/i915: Use 64-bit division macro
2020-08-11Merge tag 'backlight-next-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Core Framework: - Trivial: Code refactoring - New API backlight_is_blank() - New API backlight_get_brightness() - Additional/reworked documentation - Remove 'extern' labels from prototypes - Drop backlight_put() - Staticify of_find_backlight() Driver Removal: - Removal of unused OT200 driver - Removal of unused Generic Backlight driver Fix-ups - Bunch of W=1 warning fixes - Convert to GPIO descriptors; sky81452 - Move platform data handling into driver; sky81452 - Remove superfluous code; lms501kf03 - Many instances of using new APIs" * tag 'backlight-next-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (34 commits) video: backlight: cr_bllcd: Remove unused variable 'intensity' backlight: backlight: Make of_find_backlight static backlight: backlight: Drop backlight_put() backlight: Use backlight_get_brightness() throughout backlight: jornada720_bl: Introduce backlight_is_blank() backlight: gpio_backlight: Simplify update_status() backlight: cr_bllcd: Introduce gpio-backlight semantics backlight: as3711_bl: Simplify update_status backlight: backlight: Introduce backlight_get_brightness() doc-rst: Wire-up Backlight kernel-doc documentation backlight: backlight: Add overview and update existing doc backlight: backlight: Drop extern from prototypes backlight: generic_bl: Remove this driver as it is unused backlight: backlight: Document enums in backlight.h backlight: backlight: Document inline functions in backlight.h backlight: backlight: Improve backlight_device documentation backlight: backlight: Improve backlight_properties documentation backlight: backlight: Improve backlight_ops documentation backlight: backlight: Add backlight_is_blank() backlight: backlight: Refactor fb_notifier_callback() ...
2020-07-21video: backlight: cr_bllcd: Remove unused variable 'intensity'Lee Jones
Fixes the following kernel build warning: drivers/video/backlight/cr_bllcd.c: In function ‘cr_backlight_set_intensity’: drivers/video/backlight/cr_bllcd.c:62:6: warning: unused variable ‘intensity’ [-Wunused-variable] 62 | int intensity = bd->props.brightness; | ^~~~~~~~~ Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Fixes: 24d34617c24f ("backlight: cr_bllcd: Introduce gpio-backlight semantics") Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: backlight: Make of_find_backlight staticSam Ravnborg
There are no external users of of_find_backlight, as they have all changed to use the managed version. Make of_find_backlight static to prevent new external users. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: backlight: Drop backlight_put()Sam Ravnborg
There are no external users of backlight_put(). Drop it and open code the two users in backlight.c. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: Use backlight_get_brightness() throughoutSam Ravnborg
Introduce the backlight_get_brightness() helper in all video/backlight/* drivers. This simplifies the code and align the implementation of the update_status() operation across the different backlight drivers. Some of the drivers gains a little extra functionality by the change as they now respect the fb_blank() ioctl. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: jornada720_bl: Introduce backlight_is_blank()Sam Ravnborg
Use the backlight_is_blank() helper to simplify the code a bit. The jornada720_bl driver distinguish between backlight off and brightness set to 0. Thus this driver turn off backlight only when backlight_is_blank() returns true. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: gpio_backlight: Simplify update_status()Sam Ravnborg
Introduce the use of backlight_get_brightness() to simplify the update_status() operation. With the simpler implementation drop the gpio_backlight_get_next_brightness() helper as it was now a one-liner. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: cr_bllcd: Introduce gpio-backlight semanticsSam Ravnborg
cr_bllcd can turn backlight ON or OFF. Fix semantitics so they equals what we know from gpio-backlight. brightness == 0 => backlight off brightness == 1 => backlight on Use the backlight_get_brightness() helper to simplify the code. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: as3711_bl: Simplify update_statusSam Ravnborg
Replaces the open-coded checks of the state, with the backlight_get_brightness() helper. This increases readability of the code and align the functionality across the drivers. Furthermore drop the debug prints in update_status(). If we need debug printing then we can add it to the backlight core. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: backlight: Add overview and update existing docSam Ravnborg
Add overview chapter to backlight.c. Update existing kernel-doc to follow a more consistent style and drop kernel-doc for deprecated functions. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: generic_bl: Remove this driver as it is unusedSam Ravnborg
The backlight_bl driver required initialization using struct generic_bl_info. As there are no more references to this struct there is no users left. So it is safe to delete the driver. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-20backlight: backlight: Refactor fb_notifier_callback()Sam Ravnborg
Increase readability of fb_notifier_callback() by removing a few indent levels. No functional change. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-08video: backlight: sky81452-backlight: Fix some kerneldoc issuesLee Jones
Firstly, all lines must begin with a '*'. Secondly, arg descriptions must be spelt correctly, so fix misspelling of 'gpioD_enable' and 'short_detecTion_threshold' Fixes the following W=1 kernel build warning(s): drivers/video/backlight/sky81452-backlight.c:46: warning: bad line: If it is not defined, default name is lcd-backlight. drivers/video/backlight/sky81452-backlight.c:64: warning: Function parameter or member 'gpiod_enable' not described in 'sky81452_bl_platform_data' drivers/video/backlight/sky81452-backlight.c:64: warning: Function parameter or member 'short_detection_threshold' not described in 'sky81452_bl_platform_data' Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-06backlight: qcom-wled: Remove unused configs for LED3 and LED4Lee Jones
Fixes W=1 warnings: drivers/video/backlight/qcom-wled.c:1294:34: warning: ‘wled4_string_cfg’ defined but not used [-Wunused-const-variable=] 1294 | static const struct wled_var_cfg wled4_string_cfg = { | ^~~~~~~~~~~~~~~~ drivers/video/backlight/qcom-wled.c:1290:34: warning: ‘wled3_string_cfg’ defined but not used [-Wunused-const-variable=] 1290 | static const struct wled_var_cfg wled3_string_cfg = { | ^~~~~~~~~~~~~~~~ Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-06backlight: lm3630a_bl: Remove invalid checks for unsigned int < 0Lee Jones
unsigned ints 'sources' and 'bank' cannot be less than LM3630A_SINK_0 (0) and LM3630A_BANK_0 (0) respecitively, so change the logic to only check for thier two possible valid values. Fixes W=1 warnings: drivers/video/backlight/lm3630a_bl.c: In function ‘lm3630a_parse_led_sources’: drivers/video/backlight/lm3630a_bl.c:394:18: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 394 | if (sources[i] < LM3630A_SINK_0 || sources[i] > LM3630A_SINK_1) | ^ drivers/video/backlight/lm3630a_bl.c: In function ‘lm3630a_parse_bank’: drivers/video/backlight/lm3630a_bl.c:415:11: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 415 | if (bank < LM3630A_BANK_0 || bank > LM3630A_BANK_1) | ^ Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Daniel Jeong <gshark.jeong@gmail.com> Cc: LDD MLP <ldd-mlp@list.ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-06backlight: backlight: Supply description for function args in existing ↵Lee Jones
Kerneldocs Kerneldoc syntax is used, but not complete. Descriptions required. Prevents warnings like: drivers/video/backlight/backlight.c:329: warning: Function parameter or member 'reason' not described in 'backlight_force_update' drivers/video/backlight/backlight.c:354: warning: Function parameter or member 'props' not described in 'backlight_device_register' Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jamey Hicks <jamey.hicks@hp.com> Cc: Andrew Zabolotny <zap@homelink.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-06backlight: ili922x: Add missing kerneldoc description for ↵Lee Jones
ili922x_reg_dump()'s arg Kerneldoc syntax is used, but not complete. Descriptions required. Prevents warnings like: drivers/video/backlight/ili922x.c:298: warning: Function parameter or member 'spi' not described in 'ili922x_reg_dump' Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Software Engineering <sbabic@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-06backlight: ili922x: Remove invalid use of kerneldoc syntaxLee Jones
Kerneldoc is for documenting function arguments and return values. Prevents warnings like: drivers/video/backlight/ili922x.c:127: warning: cannot understand function prototype: 'int ili922x_id = 1; ' drivers/video/backlight/ili922x.c:136: warning: cannot understand function prototype: 'struct ili922x ' Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Software Engineering <sbabic@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-06backlight: ili922x: Add missing kerneldoc descriptions for CHECK_FREQ_REG() argsLee Jones
Kerneldoc syntax is used, but not complete. Descriptions required. Prevents warnings like: drivers/video/backlight/ili922x.c:116: warning: Function parameter or member 's' not described in 'CHECK_FREQ_REG' drivers/video/backlight/ili922x.c:116: warning: Function parameter or member 'x' not described in 'CHECK_FREQ_REG' Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Software Engineering <sbabic@denx.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-07-06backlight: lcd: Add missing kerneldoc entry for 'struct device parent'Lee Jones
This has been missing since the conversion to 'struct device' in 2007. Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Jamey Hicks <jamey.hicks@hp.com> Cc: Andrew Zabolotny <zap@homelink.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit (git 2.34.1) at 2024-06-13 16:20:19 +0000