summaryrefslogtreecommitdiff
path: root/drivers/vme/bridges
AgeCommit message (Collapse)Author
2020-01-29Merge tag 'char-misc-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc/whatever driver changes for 5.6-rc1 Included in here are loads of things from a variety of different driver subsystems: - soundwire updates - binder updates - nvmem updates - firmware drivers updates - extcon driver updates - various misc driver updates - fpga driver updates - interconnect subsystem and driver updates - bus driver updates - uio driver updates - mei driver updates - w1 driver cleanups - various other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (86 commits) mei: me: add jasper point DID char: hpet: Use flexible-array member binder: fix log spam for existing debugfs file creation. mei: me: add comet point (lake) H device ids nvmem: add QTI SDAM driver dt-bindings: nvmem: add binding for QTI SPMI SDAM dt-bindings: imx-ocotp: Add i.MX8MP compatible dt-bindings: soundwire: fix example soundwire: cadence: fix kernel-doc parameter descriptions soundwire: intel: report slave_ids for each link to SOF driver siox: Use the correct style for SPDX License Identifier w1: omap-hdq: Simplify driver with PM runtime autosuspend firmware: stratix10-svc: Remove unneeded semicolon firmware: google: Probe for a GSMI handler in firmware firmware: google: Unregister driver_info on failure and exit in gsmi firmware: google: Release devices before unregistering the bus slimbus: qcom: add missed clk_disable_unprepare in remove slimbus: Use the correct style for SPDX License Identifier slimbus: qcom-ngd-ctrl: Use dma_request_chan() instead dma_request_slave_channel() dt-bindings: SLIMBus: add slim devices optional properties ...
2020-01-14vme: bridges: reduce stack usageArnd Bergmann
With CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, the stack usage in vme_fake grows above the warning limit: drivers/vme/bridges/vme_fake.c: In function 'fake_master_read': drivers/vme/bridges/vme_fake.c:610:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] drivers/vme/bridges/vme_fake.c: In function 'fake_master_write': drivers/vme/bridges/vme_fake.c:797:1: error: the frame size of 1160 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The problem is that in some configurations, each call to fake_vmereadX() puts another variable on the stack. Reduce the amount of inlining to get back to the previous state, with no function using more than 200 bytes each. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200107200610.3482901-1-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16vme: ca91cx42: remove redundant variable iColin Ian King
Variable i is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'i' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-13vme: tsi148: Adjust 14 checks for null pointersMarkus Elfring
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: tsi148: Improve 17 size determinationsMarkus Elfring
Replace the specification of data structures by variable references as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [martyn@welchs.me.uk: Correct long line] Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: tsi148: Delete nine error messages for a failed memory allocationMarkus Elfring
Omit extra messages for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: ca91cx42: Adjust 14 checks for null pointersMarkus Elfring
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: ca91cx42: Improve 12 size determinationsMarkus Elfring
Replace the specification of data structures by variable references as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: ca91cx42: Delete eight error messages for a failed memory allocationMarkus Elfring
Omit extra messages for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: fake: Adjust 11 checks for null pointersMarkus Elfring
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The script “checkpatch.pl” pointed information out like the following. Comparison to NULL could be written … Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: fake: Improve five size determinations in fake_init()Markus Elfring
Replace the specification of data structures by pointer dereferences as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-10-13vme: fake: Delete an error message for a failed memory allocation in fake_init()Markus Elfring
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Martyn Welch <martyn@welchs.me.uk>
2017-01-11vme: Fix wrong pointer utilization in ca91cx42_slave_getAugusto Mecking Caringi
In ca91cx42_slave_get function, the value pointed by vme_base pointer is set through: *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); So it must be dereferenced to be used in calculation of pci_base: *pci_base = (dma_addr_t)*vme_base + pci_offset; This bug was caught thanks to the following gcc warning: drivers/vme/bridges/vme_ca91cx42.c: In function ‘ca91cx42_slave_get’: drivers/vme/bridges/vme_ca91cx42.c:467:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] *pci_base = (dma_addr_t)vme_base + pci_offset; Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Acked-By: Martyn Welch <martyn@welchs.me.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27vme: fake: remove unexpected unlock in fake_master_set()Wei Yongjun
image->lock is unlocked in some error handling path without take the lock, so remove those unexpected unlock. Fixes: 658bcdae9c67 ("vme: Adding Fake VME driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27vme: fake: mark symbols static where possibleBaoyou Xie
We get 4 warnings when building kernel with W=1: drivers/vme/bridges/vme_fake.c:384:6: warning: no previous prototype for 'fake_lm_check' [-Wmissing-prototypes] drivers/vme/bridges/vme_fake.c:619:6: warning: no previous prototype for 'fake_vmewrite8' [-Wmissing-prototypes] drivers/vme/bridges/vme_fake.c:649:6: warning: no previous prototype for 'fake_vmewrite16' [-Wmissing-prototypes] drivers/vme/bridges/vme_fake.c:679:6: warning: no previous prototype for 'fake_vmewrite32' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13vme: fake: fix build for 64-bit dma_addr_tArnd Bergmann
casting between dma_addr_t and a pointer is generally tricky, as they might not be the same size and almost never point into the same address space. With 32-bit ARM systems and LPAE, we get this warning for the vme_fake driver that stores a pointer in a dma_addr_t variable: drivers/vme/bridges/vme_fake.c: In function 'fake_slave_set': drivers/vme/bridges/vme_fake.c:204:29: error: assignment makes pointer from integer without a cast [-Werror=int-conversion] To make this clearer while fixing the warning, I'm adding a set of helper functions for the type conversion. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31vme: Adding Fake VME driverMartyn Welch
This patch introduces a fake VME bridge driver. This driver currently emulates a subset of the VME bridge functionality. This allows some VME subsystem development and even some VME device driver development to be carried out in the absence of a proper VME bus. Signed-off-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31vme: Fix module autoloadAlessio Igor Bogani
These drivers have a PCI device ID table but the PCI module alias information is not created so module autoloading won't work. Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31vme: change LM callback argument to void pointerAaron Sierra
Make the location monitor callback function prototype more useful by changing the argument from an integer to a void pointer. All VME bridge drivers were simply passing the location monitor index (e.g. 0-3) as the argument to these callbacks. It is much more useful to pass back a pointer to data that the callback-registering driver cares about. There appear to be no in-kernel callers of vme_lm_attach (or vme_lme_request for that matter), so this change only affects the VME subsystem and bridge drivers. This has been tested with Tsi148 hardware, but the CA91Cx42 changes have only been compiled. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01vme: add vme_init_bridge for common bridge initAaron Sierra
Consolidate vme_bridge structure setup that every bridge was required to do itself. This came about because .irq_mtx is only used within the VME core, but was required to be setup externally. This returns the structure passed in to support shorthand like this: bridge = vme_init_bridge(&priv->bridge); Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07vme: vme_ca91cx42.c: use to_pci_dev()Geliang Tang
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05vme: tsi148: silence uninitialized variable warningDmitry Kalinkin
The warning is a false positive. drivers/vme/bridges/vme_tsi148.c: In function 'tsi148_master_write': drivers/vme/bridges/vme_tsi148.c:1358:31: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized] vme_unregister_error_handler(handler); ^ drivers/vme/bridges/vme_tsi148.c: In function 'tsi148_master_read': drivers/vme/bridges/vme_tsi148.c:1260:31: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized] vme_unregister_error_handler(handler); ^ Fixes: 0b0496625715 ("vme: change bus error handling scheme") Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04vme: change bus error handling schemeDmitry Kalinkin
The current VME bus error handler adds errors to the bridge error list. vme_master_{read,write} then traverses that list to look for relevant errors. Such scheme didn't work well for accesses going through vme_master_mmap because they would also allocate a vme_bus_error, but have no way to do vme_clear_errors call to free that memory. This changes the error handling process to be other way around: now vme_master_{read,write} defines a window in VME address space that will catch possible errors. VME bus error interrupt only traverses these windows and marks those that had errors in them. Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04vme: include address space in error filteringDmitry Kalinkin
Also changes vme_bus_error_handler to take generic address modifier code instead of raw contents of a device-specific attribute register. Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04vme: move tsi148 error handling into VME subsystemDmitry Kalinkin
Error handling code found in tsi148 is not device specific. In fact it already relies on shared vme_bus_error struct and vme_bridge.vme_errors field. The other bridge driver could reuse this code if it is shared. This introduces a slight behavior change: vme error message won't be triggered in a rare case when err_chk=1 and kmalloc fails. Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Acked-by: Martyn Welch <martyn@welchs.me.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04vme: lower alignment requirement in pci bridge driversDmitry Kalinkin
Universe II allows PCI address grannularity of 4K or 64K depending on the window id. tsi148 only supports 64K. Existing driver implementations are validating window size against this grannularity and then use that very size as alignment parameter to pci_bus_alloc_resource. This constraint is excessive, alignment by granularity should be enough. This changes alignment constraint from size to a fixed constraint of 64K. Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12vme: tsi148: depend on HAS_DMA for KconfigDmitry Kalinkin
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12vme: ca91cx42: fix LM_CTL address maskDmitry Kalinkin
Universe II datasheet defines following address space values for LM_CTL[16:18] 000=A16 001=A24 010=A32 011,100,101=Reserved 110=User1 111=User2 Mask 5<<16 is not the right one for matching [16:18], instead we should use 7<<16. Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12vme: ca91cx42: return error code on DMA errorDmitry Kalinkin
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12vme: stop DMA transfer on interruptionDmitry Kalinkin
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12vme: tsi148: fix first DMA item mappingDmitry Kalinkin
This moves DMA mapping of the first list element to vme_list_add, the same place where other elements mappings occur. This prevents extra mapping or over-unmapping in the cases when vme_list_exec is called more or less than one time respectively. Also adds dma_mapping_error check. Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12vme: tsi148: fix DMA lists longer that one itemDmitry Kalinkin
DMA lists on tsi148 weren't processed further than the first item because of the broken logic. This regression was introduced in: ac1a4f2caf7b071 "Staging: VME: Ensure TSI148 link list descriptors..." Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Cc: Igor Alekseev <igor.alekseev@itep.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-06vme: tsi148: Master windows support USERx and CR/CSR accesses, not slavesMartyn Welch
The tsi148 driver is registering the slave images as supporting the "USER" access modes and CR/CSR access mode rather than the master images as it should. Remove the incorrect case entries for these modes from the tsi148_slave_set() function, stop registering slave_images as supporting these modes and instead register master windows as supporting these modes. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Acked-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-08vme: bridges: use pci_zalloc_consistentJoe Perches
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Martyn Welch <martyn.welch@ge.com> Cc: Manohar Vanga <manohar.vanga@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-09VME: remove duplicate CA91CX42_DCTL_VDW_M defineDan Carpenter
The CA91CX42_DCTL_VDW_M define is cut and pasted twice so we can delete the second instance. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16vme_tsi148: Utilize to_pci_dev() macroAaron Sierra
Save some characters by using to_pci_dev() instead of container_of(). Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16vme_tsi148: Fix PCI address mapping assumptionJoe Schultz
Previously, tsi148_master_set() assumed the address contained in its PCI bus resource represented the actual PCI bus address. This is a fine assumption on some platforms. However, on platforms that don't use a 1:1 (CPU:PCI) mapping this results in the tsi148 driver configuring an invalid master window translation. This patch updates the vme_tsi148 driver to first convert the address contained in the PCI bus resource into a PCI bus address before using it. [asierra: account for pcibios_resource_to_bus() prototype change] Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16vme_tsi148: Fix typo in tsi148_slave_get()Joe Schultz
This patch corrects a typo where "vme_base" was used instead of "*vme_base". The typo resulted in an incorrect value being returned to userspace (via vme_user). It also removes the following compile warning on some platforms: warning: cast from pointer to integer of different size [asierra: commit title/log rewording] Signed-off-by: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18Merge 3.14-rc3 into char-misc-nextGreg Kroah-Hartman
We need the fixes here for future mei and other patches. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-15VME: Stop using memcpy_[to|from]io() due to unwanted behaviourMartyn Welch
The ca91cx42 and tsi148 VME bridges use the width of reads and writes on the PCI bus in part to control the width of the cycles on the VME bus. It is important that we can control the width of cycles on the VME bus as some VME hardware requires cycles of a specific width. The memcpy_toio() and memcpy_fromio() functions do not provide sufficient control, so instead loop using ioread functions. Reported-by: Michael Kenney <mfkenney@gmail.com> Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07VME: Correct read/write alignment algorithmMartyn Welch
In order to ensure the correct width cycles on the VME bus, the VME bridge drivers implement an algorithm to utilise the largest possible width reads and writes whilst maintaining natural alignment constraints. The algorithm currently looks at the start address rather than the current read/write address when determining whether a 16-bit width cycle is required to get to 32-bit alignment. This results in incorrect alignment, Reported-by: Jim Strouth <james.strouth@ge.com> Tested-by: Jim Strouth <james.strouth@ge.com> Signed-off-by: Martyn Welch <martyn.welch@ge.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-03vme: remove DEFINE_PCI_DEVICE_TABLE macroJingoo Han
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-27vme: vme_ca91cx42.c: fix to pass correct device identity to free_irq()Wei Yongjun
free_irq() expects the same device identity that was passed to corresponding request_irq(), otherwise the IRQ is not freed. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-19vme: vme_ca91cx42.c: add missing __iomem annotationJingoo Han
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/vme/bridges/vme_ca91cx42.c:859:39: warning: incorrect type in initializer (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:859:39: expected void *addr drivers/vme/bridges/vme_ca91cx42.c:859:39: got void [noderef] <asn:2>* drivers/vme/bridges/vme_ca91cx42.c:878:30: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:878:30: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:878:30: got void *addr drivers/vme/bridges/vme_ca91cx42.c:885:47: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:885:47: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:885:47: got void * drivers/vme/bridges/vme_ca91cx42.c:889:48: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:889:48: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:889:48: got void * drivers/vme/bridges/vme_ca91cx42.c:896:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:896:17: expected void const volatile [noderef] <asn:2>*<noident> drivers/vme/bridges/vme_ca91cx42.c:896:17: got void * drivers/vme/bridges/vme_ca91cx42.c:901:40: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:901:40: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:901:40: got void * drivers/vme/bridges/vme_ca91cx42.c:905:39: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:905:39: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:905:39: got void * drivers/vme/bridges/vme_ca91cx42.c:919:39: warning: incorrect type in initializer (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:919:39: expected void *addr drivers/vme/bridges/vme_ca91cx42.c:919:39: got void [noderef] <asn:2>* drivers/vme/bridges/vme_ca91cx42.c:932:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:932:17: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:932:17: got void *addr drivers/vme/bridges/vme_ca91cx42.c:939:25: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:939:25: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:939:25: got void * drivers/vme/bridges/vme_ca91cx42.c:943:25: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:943:25: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:943:25: got void * drivers/vme/bridges/vme_ca91cx42.c:950:17: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:950:17: expected void volatile [noderef] <asn:2>*<noident> drivers/vme/bridges/vme_ca91cx42.c:950:17: got void * drivers/vme/bridges/vme_ca91cx42.c:955:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:955:17: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:955:17: got void * drivers/vme/bridges/vme_ca91cx42.c:959:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_ca91cx42.c:959:17: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_ca91cx42.c:959:17: got void * Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-19vme: vme_tsi148.c: add missing __iomem annotationJingoo Han
Added missing __iomem annotation in order to fix the following sparse warnings: drivers/vme/bridges/vme_tsi148.c:1270:39: warning: incorrect type in initializer (different address spaces) drivers/vme/bridges/vme_tsi148.c:1270:39: expected void *addr drivers/vme/bridges/vme_tsi148.c:1270:39: got void [noderef] <asn:2>* drivers/vme/bridges/vme_tsi148.c:1287:30: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1287:30: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1287:30: got void *addr drivers/vme/bridges/vme_tsi148.c:1294:47: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1294:47: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1294:47: got void * drivers/vme/bridges/vme_tsi148.c:1298:48: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1298:48: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1298:48: got void * drivers/vme/bridges/vme_tsi148.c:1305:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1305:17: expected void const volatile [noderef] <asn:2>*<noident> drivers/vme/bridges/vme_tsi148.c:1305:17: got void * drivers/vme/bridges/vme_tsi148.c:1310:40: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1310:40: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1310:40: got void * drivers/vme/bridges/vme_tsi148.c:1314:39: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1314:39: expected void const volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1314:39: got void * drivers/vme/bridges/vme_tsi148.c:1351:39: warning: incorrect type in initializer (different address spaces) drivers/vme/bridges/vme_tsi148.c:1351:39: expected void *addr drivers/vme/bridges/vme_tsi148.c:1351:39: got void [noderef] <asn:2>* drivers/vme/bridges/vme_tsi148.c:1369:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1369:17: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1369:17: got void *addr drivers/vme/bridges/vme_tsi148.c:1376:25: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1376:25: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1376:25: got void * drivers/vme/bridges/vme_tsi148.c:1380:25: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1380:25: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1380:25: got void * drivers/vme/bridges/vme_tsi148.c:1387:17: warning: incorrect type in argument 1 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1387:17: expected void volatile [noderef] <asn:2>*<noident> drivers/vme/bridges/vme_tsi148.c:1387:17: got void * drivers/vme/bridges/vme_tsi148.c:1392:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1392:17: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1392:17: got void * drivers/vme/bridges/vme_tsi148.c:1396:17: warning: incorrect type in argument 2 (different address spaces) drivers/vme/bridges/vme_tsi148.c:1396:17: expected void volatile [noderef] <asn:2>*addr drivers/vme/bridges/vme_tsi148.c:1396:17: got void * Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-24vme: vme_tsi148.c: fix error return code in tsi148_probe()Wei Yongjun
Fix to return a negative error code in the tsi148_crcsr_init() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17vme: tsi148: Window reserved for accessing CR/CSR does not need attributes setMartyn Welch
The tsi148 driver can be configured to reserve a window for internal use (as part of the error checking routine). The intialisation of this window currently configures a set of attributes that are never used as these are only ever used by the VME core and this window is not advertised to the core. Remove configuration of these attributes. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>