summaryrefslogtreecommitdiff
path: root/drivers/watchdog/aspeed_wdt.c
AgeCommit message (Collapse)Author
2018-04-16aspeed: watchdog: Set bootstatus during probeEddie James
Check the aspeed timeout status register to see if the system has booted from the secondary boot source. If so, set the watchdog device bootstatus flag for "Card previously reset the CPU." Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-24Merge branch 'v4.17-rc1'Wim Van Sebroeck
2018-03-24watchdog: aspeed: Allow configuring for alternate bootMilton Miller
Allow the device tree to specify a watchdog to fallover to the alternate boot source. The aspeeed watchdog can set a latch directing flash chip select 0 to chip select 1, allowing boot from an alternate media if the watchdog is not reset in time. On the ast2400 bank 1 also goes to flash bank 1, while on the ast2500 the chip selects are swapped. Also clear the secondary boot bit during the machine restart operation. Otherwise, the system will switch to the alternate boot after every reboot, which is not desired. Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2018-03-13watchdog: aspeed: Fix translation of reset mode to ctrl registerMilton Miller
Assert RESET_SYSTEM bit for any reset and set MODE field from reset type. The watchdog control register has a RESET_SYSTEM bit that is really closer to activate a reset, and RESET_SYSTEM_MODE field that chooses how much to reset. Before this patch, a node without these optional property would do a SOC reset, but a node with properties requesting a cpu or SOC reset would do nothing and a node requesting a system reset would do a SOC reset. Fixes: b7f0b8ad25f3 ("drivers/watchdog: ASPEED reference dev tree properties for config") Signed-off-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-28watchdog: aspeed: Move init to arch_initcallAndrew Jeffery
Probing at device_initcall time lead to perverse cases where the watchdog was probed after, say, I2C devices, which then leaves a potentially running watchdog at the mercy of I2C device behaviour and bus conditions. Load the watchdog driver early to ensure that the kernel is patting it well before initialising peripherals. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-12-28watchdog: aspeed: Retain watchdog enabled stateAndrew Jeffery
An unintended post-condition of probe() is that the watchdog is disabled. This behaviour was introduced by an unnecessary write to the control register to configure the hardware based on the devicetree. The write is unnecessary because the cached control value that is manipulated by the code parsing the devicetree is eventually written by aspeed_wdt_enable(), which is when we care how the control register should be configured. Remove the write to restore expected behaviour. Fixes: b7f0b8ad25f3 ("drivers/watchdog: ASPEED reference dev tree properties for config") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09watchdog: aspeed: Support configuration of external signal propertiesAndrew Jeffery
Add support for configuring the drive strength and polarity on the AST2500, and the pulse duration on both the AST2400 and AST2500. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Matt Spinler <mspinler@linux.vnet.ibm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-09-09drivers/watchdog: ASPEED reference dev tree properties for configChristopher Bostic
Reference the system device tree when configuring the watchdog engines. If property 'aspeed,reset_type' is present then set reset behavior based on the specified value. This can be one of three different mutually exclusive values * cpu - Reset CPU only on watchdog timeout * soc - Reset System on Chip * system - Full system reset No reset can also be specified by indicating: * none - No reset, assumes another watchdog is responsible for this. Add optional property 'aspeed,external-signal'. If present then configure to generate external signal on watchdog timeout. Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2017-02-24watchdog: aspeed_wdt: Convert to use device managed functionsGuenter Roeck
Use device managed functions to simplify error handling, reduce source code size, improve readability, and reduce the likelyhood of bugs. The conversion was done automatically with coccinelle using the following semantic patches. The semantic patches and the scripts used to generate this commit log are available at https://github.com/groeck/coccinelle-patches - Drop assignments to otherwise unused variables - Drop remove function - Drop platform_set_drvdata() - Use devm_watchdog_register_driver() to register watchdog device Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-07-17watchdog: Add Aspeed watchdog driverJoel Stanley
Provides generic watchdog features as well as reboot support for the Aspeed SoCs. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>