summaryrefslogtreecommitdiff
path: root/drivers/watchdog/imx2_wdt.c
AgeCommit message (Collapse)Author
2016-10-08watchdog: imx2_wdt: add pretimeout function supportVladimir Zapolskiy
The change adds watchdog pretimeout notification handling to imx2_wdt driver, if device data contains information about a valid interrupt. It is unlikely but still possible (e.g. through a software limitation) that only a subset of watchdogs on SoC has interrupt lines, hence functionally the devices from these two groups have different capabilities, and this is reflected in different watchdog_info structs assigned to the devices. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-24watchdog: imx2_wdt: use preferred BIT macro instead of open coded valuesVladimir Zapolskiy
This is a nonfunctional change, declare register bit values with BIT() helper macro. The issues are reported by checkpatch: CHECK: Prefer using the BIT macro #40: FILE: drivers/watchdog/imx2_wdt.c:40: +#define IMX2_WDT_WCR_WDA (1 << 5) /* -> External Reset WDOG_B */ etc. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-05-14watchdog: imx2_wdt: add external reset support via dt propTim Harvey
The IMX6 watchdog supports assertion of a signal (WDOG_B) which can be pinmux'd to an external pin. This is typically used for boards that have PMIC's in control of the IMX6 power rails. In fact, failure to use such an external reset on boards with external PMIC's can result in various hangs due to the IMX6 not being fully reset [1] as well as the board failing to reset because its PMIC has not been reset to provide adequate voltage for the CPU when coming out of reset at 800Mhz. This uses a new device-tree property 'fsl,ext-reset-output' to indicate the board has such a reset and to cause the watchdog to be configured to assert WDOG_B instead of an internal reset both on a watchdog timeout and in system_restart. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/333689.html Cc: Fabio Estevam <festevam@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Stefan Roese <sr@denx.de> Cc: Iain Paton <ipaton0@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-03-16watchdog: imx2: Convert to use infrastructure triggered keepalivesGuenter Roeck
The watchdog infrastructure now supports handling watchdog keepalive if the watchdog is running while the watchdog device is closed. Convert the driver to use this infrastructure. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-03-01watchdog: Add 'action' and 'data' parameters to restart handler callbackGuenter Roeck
The 'action' (or restart mode) and data parameters may be used by restart handlers, so they should be passed to the restart callback functions. Cc: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-12-13watchdog: imx2_wdt: use core restart handlerDamien Riegel
Get rid of the custom restart handler by using the one provided by the watchdog core. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-10-28watchdog: imx2_wdt: Use register definition in regmap_write()Fabio Estevam
In order to improve readability it is better to pass the register name definition rather than to pass its hardcoded offset. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26watchdog: imx2_wdt: Disable previously acquired clock on error pathFabio Estevam
If watchdog_register_device() fails we should disable the previously acquired wdev->clk clock on error path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-26watchdog: imx2_wdt: Check for clk_prepare_enable() errorFabio Estevam
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imx2_wdt: set watchdog parent deviceVladimir Zapolskiy
If on watchdog device registration a parent device is not set, then the registered watchdog is considered to be a virtual device: /sys/devices/virtual/watchdog/watchdog0 /sys/devices/virtual/watchdog/watchdog1 Setting a correct reference to a platform device allows to distinguish multiple instances of iMX2+ hardware watchdogs: /sys/devices/soc0/soc/2000000.aips-bus/20bc000.wdog/watchdog/watchdog0 /sys/devices/soc0/soc/2000000.aips-bus/20c0000.wdog/watchdog/watchdog1 Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-06-22watchdog: imx2_wdt: also set wdog->timeout to new_timeoutMichael Grzeschik
Commit faad5de0b104 ("watchdog: imx2_wdt: convert to watchdog core api") removes the custom ioctl function. The generic ioctl handler is not setting the wdog->timeout to the new_timeout but handing this preset value back to the userspace. This patch sets the new value in the drivers set_timeout function to fix that problem. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17watchdog: imx2: Constify struct regmap_config and watchdog_opsKrzysztof Kozlowski
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make struct watchdog_ops const as well. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21watchdog: imx2_wdt: Disable power down counter on bootMarkus Pargmann
Disable power down counter of the watchdog to avoid system resets. The watchdog power down counter is set automatically by the chip. If it is not set to 0 in the driver, the system resets. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-01-21watchdog: imx2_wdt: Improve power management support.Xiubo Li
Improve power management operations(suspend and resume) as part of dev_pm_ops for IMX2 watchdog driver. If PM will be supported, please make sure that the wdev->clk could disable the watchdog's counter input clock source or can mask watchdog's reset request to the core. If watchdog is still used by consumers and resumes from deep sleep state, we need to restart the watchdog again without enabling the timer. If watchdog been has started --> stopped by the consumers and resumes from non-deep sleep state, then start the timer again. If watchdog has been started --> stopped by the consumers and resumes from deep sleep state, will do nothing. The watchdog will be restarted by consumers next time to be used. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18watchdog: imx2_wdt: Fix the argument of watchdog_active()Fabio Estevam
Fix the following build warning by passing the expected argument type to watchdog_active(): drivers/watchdog/imx2_wdt.c: In function 'imx2_wdt_suspend': drivers/watchdog/imx2_wdt.c:340:2: warning: passing argument 1 of 'watchdog_active' from incompatible pointer type [enabled by default] In file included from drivers/watchdog/imx2_wdt.c:38:0: include/linux/watchdog.h:104:20: note: expected 'struct watchdog_device *' but argument is of type 'struct watchdog_device **' Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-12-18watchdog: imx2_wdt: Add power management support.Xiubo Li
Add power management operations(suspend and resume) as part of dev_pm_ops for IMX2 watchdog driver. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-10-20watchdog: imx2_wdt: add restart handler supportJingchang Lu
Register the watchdog as the system restart function to the new introducing kernel restart call chain in the driver instead of providing the restart in machine desc. This restart handler function is from the mxc_restart() in arch/arm/mach-imx/system.c Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: imx2_wdt: Convert to use regmap framework's endianness method.Xiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-10-20watchdog: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-05watchdog: imx2_wdt: adds big endianness support.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs WDT endian mode ------------------------------------ IMX2+ LE Vybird LE LS1 BE LS2 LE Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to watchdog core apiAnatolij Gustschin
Convert the imx2_wdt driver to the new watchdog core api. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: convert to use regmap API.Xiubo Li
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+ platforms, and will be in different endianness mode in those SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ IMX2+ LE LE Vybird LE LE LS1 LE BE LS2 LE LE Other possible SoCs: SoCs CPU endian mode WDT endian mode ------------------------------------------------ Soc1 BE BE Soc2 BE LE And also the watchdog's registers will be 32-bits for some versions, and though it is 16-bits in IMX2+, Vybird and LS+. Using the regmap APIs, could be more easy to support different endianness and also more easy to support 32-bits version... Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10watchdog: imx2_wdt: Sort the header files alphabeticallyXiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-01-28watchdog: imx2_wdt: disable watchdog timer during low power modeAnson Huang
We should set watchdog timer to be disabled in low power mode, as there is no service running in background, otherwise, system will reset unexpected. Signed-off-by: Anson Huang <b20788@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-11-17watchdog: Get rid of MODULE_ALIAS_MISCDEV statementsJean Delvare
I just can't find any value in MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) and MODULE_ALIAS_MISCDEV(TEMP_MINOR) statements. Either the device is enumerated and the driver already has a module alias (e.g. PCI, USB etc.) that will get the right driver loaded automatically. Or the device is not enumerated and loading its driver will lead to more or less intrusive hardware poking. Such hardware poking should be limited to a bare minimum, so the user should really decide which drivers should be tried and in what order. Trying them all in arbitrary order can't do any good. On top of that, loading that many drivers at once bloats the kernel log. Also many drivers will stay loaded afterward, bloating the output of "lsmod" and wasting memory. Some modules (cs5535_mfgpt which gets loaded as a dependency) can't even be unloaded! If defining char-major-10-130 is needed then it should happen in user-space. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Jim Cromie <jim.cromie@gmail.com>
2013-11-17watchdog: imx2_wdt: expose module alias for loading from device-treeNiels de Vos
Enable auto loading by udev when imx2_wdt is compiled as a module. Signed-off-by: Niels de Vos <ndevos@redhat.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11watchdog: imx2_wdt: use devm_clk_get()Jingoo Han
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-05-18drivers/watchdog: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-01-25watchdog: Convert to devm_ioremap_resource()Thierry Reding
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17watchdog: convert drivers/watchdog/* to use module_platform_driver_probeFabio Porcedda
This makes the code a bit smaller by getting rid of some boilerplate code. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-15watchdog: imx2_wdt: remove unneeded mach/hardware.h inclusionShawn Guo
The inclusion of mach/hardware.h is not used by the driver at all. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2012-04-25watchdog imx2: prepare clk before enabling itSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-27watchdog: nowayout is boolWim Van Sebroeck
nowayout is actually a boolean value. So make it bool for all watchdog device drivers. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27watchdog: make imx2_wdt report boot status correctlyOskar Schirmer
Ioctl WDIOC_GETBOOTSTATUS is supposed to return some information on why the system did (re)boot recently, value WDIOF_CARDRESET being used to indicate watchdog induced reboot. Up to now, imx2_wdt did not provide a value here, always returning zero to indicate normal boot. Do evaluate the IMX Watchdog Reset Status Register and produce WDIOF_CARDRESET with WDIOC_GETBOOTSTATUS in case of a watchdog induced reset. Signed-off-by: Oskar Schirmer <oskar@scara.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: imx2_wdt.c: use devm_request_and_ioremapJulia Lawall
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The variable res_size is then no longer needed. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26watchdog: imx2_wdt: add device tree probe supportShawn Guo
Adds device tree probe support for imx2_wdt driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-12-14watchdog: imx: use clk_get to acquire the watchdog clockFabio Estevam
Use clk_get to acquire the watchdog clock and also avoid hardcoding the clock name. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-06-13watchdog: [PATCH 3/3] imx2_wdt: fix section mismatchBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-25watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) ↵Wolfram Sang
processors. This is the driver for the hardware watchdog on the Freescale IMX2 and later processors. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>