summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2020-02-17watchdog: da9062: Add dependency on I2CGuenter Roeck
Since commit 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic safe"), the driver calls i2c functions directly. It now therefore depends on I2C. This is a hard dependency which overrides COMPILE_TEST. Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic safe") Cc: Marco Felsch <m.felsch@pengutronix.de> Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Cc: Stefan Lengfeld <contact@stefanchrist.eu> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-17watchdog: da9062: fix power management opsMarco Felsch
This fixes commit f6c98b08381c ("watchdog: da9062: add power management ops"). During discussion [1] we agreed that this should be configurable because it is a device quirk if we can't use the hw watchdog auto suspend function. [1] https://lore.kernel.org/linux-watchdog/20191128171931.22563-1-m.felsch@pengutronix.de/ Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Fixes: f6c98b08381c ("watchdog: da9062: add power management ops") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200207071518.5559-1-m.felsch@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-17watchdog: da9062: do not ping the hw during stop()Marco Felsch
The da9062 hw has a minimum ping cool down phase of at least 200ms. The driver takes that into account by setting the min_hw_heartbeat_ms to 300ms and the core guarantees that the hw limit is observed for the ping() calls. But the core can't guarantee the required minimum ping cool down phase if a stop() command is send immediately after the ping() command. So it is not allowed to ping the watchdog within the stop() command as the driver does. Remove the ping can be done without doubts because the watchdog gets disabled anyway and a (re)start resets the watchdog counter too. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-17watchdog: fix mtk_wdt.c RESET_CONTROLLER build errorRandy Dunlap
Fix build error when CONFIG_RESET_CONTROLLER is not set by selecting RESET_CONTROLLER. ld: drivers/watchdog/mtk_wdt.o: in function `mtk_wdt_probe': mtk_wdt.c:(.text+0x3ec): undefined reference to `devm_reset_controller_register' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Fixes: c254e103082b74e ("watchdog: mtk_wdt: mt8183: Add reset controller") Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/77c1e557-4941-3806-2933-6c3583576390@infradead.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-02-07Merge tag 'linux-watchdog-5.6-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add IT8786 chipset ID - addition of sam9x60 compatible watchdog - da9062 improvements - fix UAF in reboot notifier handling in watchdog core code - other fixes and small improvements * tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: make restart handler atomic safe watchdog: mtk_wdt: mt2712: Add reset controller watchdog: mtk_wdt: mt8183: Add reset controller dt-bindings: mediatek: mt2712: Add #reset-cells dt-bindings: mediatek: mt8183: Add #reset-cells dt-bindings: watchdog: da9062: add suspend disable option watchdog: it87_wdt: add IT8786 ID watchdog: dw_wdt: ping watchdog to reset countdown before start watchdog: fix UAF in reboot notifier handling in watchdog core code watchdog: cadence: Skip printing pointer value watchdog: qcom: Use platform_get_irq_optional() for bark irq watchdog: da9062: add power management ops watchdog: make DesignWare watchdog allow users to set bigger timeout value drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-27watchdog: da9062: make restart handler atomic safeMarco Felsch
The restart handler is executed during the shutdown phase which is atomic/irq-less. The i2c framework supports atomic transfers since commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") to address this use case. Using regmap within an atomic context is allowed only if the regmap type is MMIO and the cache type 'flat' or no cache is used. Using the i2c_smbus_write_byte_data() function can be done without additional tests because: 1) the DA9062 is an i2c-only device and 2) the i2c framework emulates the smbus protocol if the host adapter does not support smbus_xfer by using the master_xfer. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stefan Lengfeld <contact@stefanchrist.eu> Tested-by: Stefan Lengfeld <contact@stefanchrist.eu> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200115162307.7336-1-m.felsch@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: mtk_wdt: mt2712: Add reset controlleryong.liang
Add reset controller for 2712. Besides watchdog, MTK toprgu module alsa provide sub-system (eg, audio, camera, codec and connectivity) software reset functionality. Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-5-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: mtk_wdt: mt8183: Add reset controlleryong.liang
Add reset controller API in watchdog driver. Besides watchdog, MTK toprgu module alsa provide sub-system (eg, audio, camera, codec and connectivity) software reset functionality. Signed-off-by: yong.liang <yong.liang@mediatek.com> Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200115085828.27791-4-yong.liang@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: it87_wdt: add IT8786 IDVincent Prince
IT8786 watchdog works as in IT872x Tested on VECOW ECS-9000 board. Signed-off-by: Vincent Prince <Vincent.PRINCE.fr@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200123140544.25937-1-vincent.prince.fr@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: dw_wdt: ping watchdog to reset countdown before startJack Mitchell
Currently on an rk3288 SoC when trying to use the watchdog the SoC will instantly reset. This is due to the watchdog countdown counter being set to its initial value of 0x0. Reset the watchdog counter before start in order to correctly start the countdown timer from the right position. Signed-off-by: Jack Mitchell <ml@embed.me.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200107155155.278521-1-ml@embed.me.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: fix UAF in reboot notifier handling in watchdog core codeVladis Dronov
After the commit 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") the struct notifier_block reboot_nb in the struct watchdog_device is removed from the reboot notifiers chain at the time watchdog's chardev is closed. But at least in i6300esb.c case reboot_nb is embedded in the struct esb_dev which can be freed on its device removal and before the chardev is closed, thus UAF at reboot: [ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28 ts# uname -r note the address ^^^ 5.5.0-rc5-ae6088-wdog ts# ./openwdog0 & [1] 696 ts# opened /dev/watchdog0, sleeping 10s... ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove [ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28 esb_dev.watchdog_device.reboot_nb memory is freed here ^^^ ts# ...woken up [ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8 [ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78 attempt to use memory already freed ^^^ [ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b [ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b freed memory is filled with a slub poison ^^^ [1]+ Done ./openwdog0 ts# reboot [ 229.921862] systemd-shutdown[1]: Rebooting. [ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0 [ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b [ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL [ 229.957584] general protection fault: 0000 [#1] SMP [ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog [ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0 [ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246 [ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3 [ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac [ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3 [ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000 [ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa ... slub_debug=FZP poison ^^^ [ 229.989089] Call Trace: [ 229.990157] blocking_notifier_call_chain+0x43/0x59 [ 229.991401] kernel_restart_prepare+0x14/0x30 [ 229.992607] kernel_restart+0x9/0x30 [ 229.993800] __do_sys_reboot+0x1d2/0x210 [ 230.000149] do_syscall_64+0x3d/0x130 [ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 230.002639] RIP: 0033:0x7f5461bdd177 [ 230.016402] Modules linked in: i6300esb [ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix the crash by reverting 44ea39420fc9 so unregister_reboot_notifier() is called when watchdog device is removed. This also makes handling of the reboot notifier unified with the handling of the restart handler, which is freed with unregister_restart_handler() in the same place. Fixes: 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: cadence: Skip printing pointer valueSrinivas Neeli
"%p" is not printing the pointer value. In driver, printing pointer value is not useful so avoiding print. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1576825096-26605-1-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: qcom: Use platform_get_irq_optional() for bark irqSai Prakash Ranjan
platform_get_irq() prints an error message when the interrupt is not available. So on platforms where bark interrupt is not specified, following error message is observed on SDM845. [ 2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found This is also seen on SC7180, SM8150 SoCs as well. Fix this by using platform_get_irq_optional() instead. Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191213064934.4112-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: da9062: add power management opsMarco Felsch
Disable the watchdog during suspend if it is enabled and re-enable it on resume. So we can sleep without the interruptions. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191128171931.22563-1-m.felsch@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: make DesignWare watchdog allow users to set bigger timeout valueWang, Peng 1. (NSB - CN/Hangzhou)
watchdog_dev.c provides means to allow users to set bigger timeout value than HW can support, make DesignWare watchdog align with this. Signed-off-by: Peng Wang <peng.1.wang@nokia-sbell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/8fa54e92c6cd4544a7a3eb60a373ac43@nokia-sbell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probeChristophe Roullier
If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should start/reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set), until the userspace watchdog daemon takes over control Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver") Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-27watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdogEugen Hristev
Add support for SAM9X60 WDT into sama5d4_wdt. This means that this driver gets a flag inside the data struct that represents the sam9x60 support. This flag differentiates between the two hardware blocks, and is set according to the compatible of the driver instantiation. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1574067012-18559-3-git-send-email-eugen.hristev@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-12-30watchdog: orion: fix platform_get_irq() complaintsRussell King
Fix: orion_wdt f1020300.watchdog: IRQ index 1 not found which is caused by platform_get_irq() now complaining when optional IRQs are not found. Neither interrupt for orion is required, so make them both optional. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: rn5t618_wdt: fix module aliasesAndreas Kemnade
Platform device aliases were missing so module autoloading did not work. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: tqmx86_wdt: Fix build errorYueHaibing
If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails: drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe': tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout' tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device' Select WATCHDOG_CORE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: max77620_wdt: fix potential build errorsDavid Engraf
max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()Fabio Estevam
Since commit 747d88a1a88c1b ("watchdog: imx7ulp: Pass the wdog instance in imx7ulp_wdt_enable()") imx7ulp_wdt_enable() accepts a watchdog_device structure, so fix one instance that missed such conversion. This also fixes the following sparse warning: drivers/watchdog/imx7ulp_wdt.c:115:31: warning: incorrect type in argument 1 (different address spaces) drivers/watchdog/imx7ulp_wdt.c:115:31: expected struct watchdog_device *wdog drivers/watchdog/imx7ulp_wdt.c:115:31: got void [noderef] <asn:2>*base Fixes: 747d88a1a88c1 ("watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191120140916.25001-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-30watchdog: w83627hf_wdt: Fix support NCT6116DSrikanth Krishnakar
We should select nct6116 for the new chip, not nct6102. Signed-off-by: Srikanth Krishnakar <skrishnakar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-12-01Merge tag 'linux-watchdog-5.5-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - support for NCT6116D - several small fixes and improvements * tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: jz4740: Drop dependency on MACH_JZ47xx watchdog: jz4740: Use regmap provided by TCU driver watchdog: jz4740: Use WDT clock provided by TCU driver dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible watchdog: sama5d4_wdt: cleanup the bit definitions watchdog: sprd: Fix the incorrect pointer getting from driver data watchdog: aspeed: Fix clock behaviour for ast2600 watchdog: imx7ulp: Fix reboot hang watchdog: make nowayout sysfs file writable watchdog: prevent deferral of watchdogd wakeup on RT watchdog: imx7ulp: Use definitions instead of magic values watchdog: imx7ulp: Remove inline annotations watchdog: imx7ulp: Remove unused structure member watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable() watchdog: wdat_wdt: Spelling s/configrable/configurable/ watchdog: bd70528: Trivial function documentation fix watchdog: cadence: Do not show error in case of deferred probe watchdog: Fix the race between the release of watchdog_core_data and cdev watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support ...
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-18watchdog: jz4740: Drop dependency on MACH_JZ47xxPaul Cercueil
Depending on MACH_JZ47xx prevent us from creating a generic kernel that works on more than one MIPS board. Instead, we just depend on MIPS being set. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191023174714.14362-3-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: jz4740: Use regmap provided by TCU driverPaul Cercueil
Since we broke the ABI by changing the clock, the driver was also updated to use the regmap provided by the TCU driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191023174714.14362-2-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: jz4740: Use WDT clock provided by TCU driverPaul Cercueil
Instead of requesting the "ext" clock and handling the watchdog clock divider and gating in the watchdog driver, we now request and use the "wdt" clock that is supplied by the ingenic-timer "TCU" driver. The major benefit is that the watchdog's clock rate and parent can now be specified from within devicetree, instead of hardcoded in the driver. Also, this driver won't poke anymore into the TCU registers to enable/disable the clock, as this is now handled by the TCU driver. On the bad side, we break the ABI with devicetree - as we now request a different clock. In this very specific case it is still okay, as every Ingenic JZ47xx-based board out there compile the devicetree within the kernel; so it's still time to push breaking changes, in order to get a clean devicetree that won't break once it musn't. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191023174714.14362-1-paul@crapouillou.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: sama5d4_wdt: cleanup the bit definitionsEugen Hristev
Cleanup the macro definitions to use BIT and align with two spaces. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1573806579-7981-1-git-send-email-eugen.hristev@microchip.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: sprd: Fix the incorrect pointer getting from driver dataShuiqing Li
The device driver data saved the 'struct sprd_wdt' object, it is incorrect to get 'struct watchdog_device' object from the driver data, thus fix it. Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Reported-by: Dongwei Wang <dongwei.wang@unisoc.com> Signed-off-by: Shuiqing Li <shuiqing.li@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/76d4687189ec940baa90cb8d679a8d4c8f02ee80.1573210405.git.baolin.wang@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: aspeed: Fix clock behaviour for ast2600Joel Stanley
The ast2600 no longer uses bit 4 in the control register to indicate a 1MHz clock (It now controls whether this watchdog is reset by a SOC reset). This means we do not want to set it. It also does not need to be set for the ast2500, as it is read-only on that SoC. The comment next to the clock rate selection wandered away from where it was set, so put it back next to the register setting it's describing. Fixes: b3528b487448 ("watchdog: aspeed: Add support for AST2600") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191108032905.22463-1-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx7ulp: Fix reboot hangFabio Estevam
The following hang is observed when a 'reboot' command is issued: # reboot # Stopping network: OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only [ 8.612079] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot [ 10.694753] reboot: Restarting system [ 11.699008] Reboot failed -- System halted Fix this problem by adding a .restart ops member. Fixes: 41b630f41bf7 ("watchdog: Add i.MX7ULP watchdog support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191029174037.25381-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: make nowayout sysfs file writableRasmus Villemoes
It can be useful to delay setting the nowayout feature for a watchdog device. Moreover, not every driver (notably gpio_wdt) implements a nowayout module parameter/otherwise respects CONFIG_WATCHDOG_NOWAYOUT, and modifying those drivers carries a risk of causing a regression for someone who has two watchdog devices, sets CONFIG_WATCHDOG_NOWAYOUT and somehow relies on the gpio_wdt driver being ignorant of that (i.e., allowing one to gracefully close a gpio_wdt but not the other watchdog in the system). So instead, simply make the nowayout sysfs file writable. Obviously, setting nowayout is a one-way street. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105205118.11359-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: prevent deferral of watchdogd wakeup on RTJulia Cartwright
When PREEMPT_RT is enabled, all hrtimer expiry functions are deferred for execution into the context of ksoftirqd unless otherwise annotated. Deferring the expiry of the hrtimer used by the watchdog core, however, is a waste, as the callback does nothing but queue a kthread work item and wakeup watchdogd. It's worst then that, too: the deferral through ksoftirqd also means that for correct behavior a user must adjust the scheduling parameters of both watchdogd _and_ ksoftirqd, which is unnecessary and has other side effects (like causing unrelated expiry functions to execute at potentially elevated priority). Instead, mark the hrtimer used by the watchdog core as being _HARD to allow it's execution directly from hardirq context. The work done in this expiry function is well-bounded and minimal. A user still must adjust the scheduling parameters of the watchdogd to be correct w.r.t. their application needs. Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com Cc: Guenter Roeck <linux@roeck-us.net> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [bigeasy: use only HRTIMER_MODE_REL_HARD] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx7ulp: Use definitions instead of magic valuesFabio Estevam
Use definitions instead of magic values in order to improve readability. Since the CLK field of the WDOG CS register is composed of two bits to select the watchdog clock source, use a shift representation instead of BIT(). Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191029174037.25381-5-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx7ulp: Remove inline annotationsFabio Estevam
Compiler is smart enough and knows when to inline, so there is no need to mark some of these functions as 'inline'. Remove such annotations. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191029174037.25381-4-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx7ulp: Remove unused structure memberFabio Estevam
The 'notifier_block' structure member is unused, so just remove it. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191029174037.25381-3-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()Fabio Estevam
It is more natural to pass the watchdog instance inside imx7ulp_wdt_enable() instead of the base address. This also has the benefit to reduce the code a bit. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191029174037.25381-2-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: wdat_wdt: Spelling s/configrable/configurable/Geert Uytterhoeven
Fix misspelling of "configurable". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191024152856.30788-1-geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: bd70528: Trivial function documentation fixMatti Vaittinen
The function documentation for the exported ROHM BD70528 WDG control functions used old argument names. Fix the names. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191010060733.GA9979@localhost.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: cadence: Do not show error in case of deferred probeMichal Simek
There is no reason to show error message if clocks are not ready yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/d3e295d5ba79f453b4aa4128c4fa63fbd6c16920.1570544944.git.michal.simek@xilinx.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: Fix the race between the release of watchdog_core_data and cdevKevin Hao
The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warningBorislav Petkov
... by moving the fall through comment outside of the code block so that gcc sees it. No functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190929114649.22740-1-bp@alien8.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT supportAndy Shevchenko
Normally, the watchdog is disabled when /dev/watchdog is closed, but if CONFIG_WATCHDOG_NOWAYOUT is defined, then it means that the watchdog should remain enabled. So we should keep it enabled if CONFIG_WATCHDOG_NOWAYOUT is defined. Reported-by: Razvan Becheriu <razvan.becheriu@qualitance.com> Cc: Ferry Toth <fntoth@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Razvan Becheriu <razvan.becheriu@gmail.com> Link: https://lore.kernel.org/r/20190924143116.69823-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx2_wdt: Use 'dev' instead of dereferencing it repeatedlyAnson Huang
Add helper variable dev = &pdev->dev to simply the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1569308828-8320-3-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx2_wdt: Use __maybe_unused instead of #if CONFIG_PM_SLEEPAnson Huang
Use __maybe_unused for power management related functions instead of #if CONFIG_PM_SLEEP to simply the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1569308828-8320-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: imx2_wdt: Remove unnecessary blank lineAnson Huang
Remove unnecessary blank line. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1569308828-8320-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-18watchdog: w83627hf_wdt: Support NCT6116DSrikanth Krishnakar
The watchdog controller on NCT6116D is compatible with NCT6102D. Extend the support to enable SuperIO based NCT6116D watchdog device. Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190918160458.10108-1-Srikanth_Krishnakar@mentor.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>