summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2019-09-17watchdog: ziirave_wdt: Fix misleading error messageAndrey Smirnov
Fix misleading error message in ziirave_wdt_init_duration(). Saying "unable to set ..." implies that an attempt at communication with watchdog device has taken palce and was not successful. In this case, however, all it indicates is that no reset pulse duration was specified either via kernel parameter or Device Tree. Re-phase the log message to be more clear about benign nature of this event. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-16-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't try to program readonly flashAndrey Smirnov
Bootloader code will ignore any attempts to write data to any flash area outside of [ZIIRAVE_FIRM_FLASH_MEMORY_START; ZIIRAVE_FIRM_FLASH_MEMORY_END]. Firmware update code already have an appropriate check to skip those areas when validating updated firmware. Firmware programming code, OTOH, does not and will needlessly send no-op I2C traffic. Add an appropriate check to __ziirave_firm_write_pkt() so as to save all of that wasted effort. While at it, normalize all of the address handling code to use full 32-bit address in units of bytes and convert it to an appropriate value only in places where that is necessary. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-15-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't read out more than 'len' firmware bytesAndrey Smirnov
We only compare first 'len' bytes of read firmware, so we don't need to read more that that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-14-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't check if ihex record length is zeroAndrey Smirnov
Ihex_next_binrec() will return NULL if next record's 'len' is zero, so explicit checks for that in the driver are unnecessary. Drop them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-13-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Make use of put_unaligned_le16Andrey Smirnov
Instead of doing this explicitly use put_unaligned_le16() to place 16-bit address value into command payload. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-12-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Zero out only what's necessaryAndrey Smirnov
Instead of zeroing out all of the packet and then overwriting a significant portion of those zeros via memcpy(), zero out only a portion of the packet that is known to not contain any data. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-11-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZEAndrey Smirnov
Both memset() and ziirave_firm_write_block_data() expect length in bytes as an argument, not a number of elements in array. It just happens that in this particular case both values are equal. Modify the code to use sizeof() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-10-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Skip zeros when calculating checksumAndrey Smirnov
Zeros don't contribute anything to checksum value, so we can skip unused portion of the packet when calculating its checksum. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-9-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Check packet length only onceAndrey Smirnov
We don't need to check for packet length more than once, so drop the extra check in ziirave_firm_upload(). While at it move the check at the very start of __ziirave_firm_write_pkt(), as to not waste any time preparing a packet we'll never use. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-8-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Simplify ziirave_firm_write_pkt()Andrey Smirnov
There no reason why ziirave_firm_write_pkt() has to take firmware data via 'struct ihex_binrec' and it can just take address, data pointer and data length as individual arguments. Make this change to allow us to drastically simplify handling page crossing case by removing all of the extra code required to split 'struct ihex_binrec' into two. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-7-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Log bootloader/firmware info during probeAndrey Smirnov
Log bootloader/firmware info during probe. This information is available via sysfs already, but it's really helpful to have this in kernel log during startup as well. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-6-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't bail out on unexpected timeout valueAndrey Smirnov
Reprogramming bootloader on watchdog MCU will result in reported default timeout value of "0". That in turn will be unnecessarily rejected by the driver as invalid device (-ENODEV). Simplify probe to read stored timeout value, set it to a sane default if it is bogus, and then program that value unconditionally. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-5-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be more verbose during firmware updateAndrey Smirnov
Add more error logging to ziirave_firm_upload() for diagnostics. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-4-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Be verbose about errors in probe()Andrey Smirnov
The driver is quite silent in case of probe failure, which makes it more difficult to diagnose problem from the kernel log. Add logging to all of the silent error paths ziirave_wdt_probe() to improve that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-3-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Add missing newlineAndrey Smirnov
Add missing newline. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-2-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx_sc: Remove unnecessary error logAnson Huang
An error message is already displayed by watchdog_register_device() when failed, so no need to have error log again for failure of calling devm_watchdog_register_device(). Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812084434.13316-1-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeoutRasmus Villemoes
Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: cpwd: use generic compat_ptr_ioctlArnd Bergmann
The cpwd_compat_ioctl() contains a bogus mutex that dates back to a leftover BKL instance. Simplify the implementation by using the new compat_ptr_ioctl() helper function that will do the right thing for all calls here. Note that WIOCSTART/WIOCSTOP don't take any arguments, so the compat_ptr() conversion is not needed here, but it also doesn't hurt. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190814204259.120942-6-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: diag288_wdt: Remove leftover includes from conversion to watchdog APIGuenter Roeck
Commit f7a94db4e959 ("s390/watchdog: use watchdog API") converted the driver to use the watchdog API, but some includes as well as MODULE_ALIAS_MISCDEV() were missed. Cc: Philipp Hachtmann <phacht@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-16watchdog: remove w90x900 driverArnd Bergmann
The ARM w90x900 platform is getting removed, so this driver is obsolete Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190809202749.742267-7-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-16watchdog: remove ks8695 driverArnd Bergmann
The platform is getting removed, so there are no remaining users of this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190809202749.742267-5-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-16watchdog: pnx4008_wdt: allow compile-testingArnd Bergmann
The only thing that prevents building this driver on other platforms is the mach/hardware.h include, which is not actually used here at all, so remove the line and allow CONFIG_COMPILE_TEST. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190809144043.476786-4-arnd@arndb.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-03watchdog: iTCO: Add support for Cannon Lake PCH iTCOMika Westerberg
In Intel Cannon Lake PCH the NO_REBOOT bit was moved from the private register space to be part of the TCO1_CNT register. For this reason introduce another version (6) that uses this register to set and clear NO_REBOOT bit. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-22Merge tag 'Wimplicit-fallthrough-5.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arm and mips for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: video: fbdev: acornfb: Mark expected switch fall-through scsi: libsas: sas_discover: Mark expected switch fall-through MIPS: Octeon: Mark expected switch fall-through power: supply: ab8500_charger: Mark expected switch fall-through watchdog: wdt285: Mark expected switch fall-through mtd: sa1100: Mark expected switch fall-through drm/sun4i: tcon: Mark expected switch fall-through drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through ARM: riscpc: Mark expected switch fall-through dmaengine: fsldma: Mark expected switch fall-through
2019-08-20watchdog: wdt285: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: footbridge_defconfig arm): drivers/watchdog/wdt285.c: In function ‘watchdog_ioctl’: drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] watchdog_ping(); ^~~~~~~~~~~~~~~ drivers/watchdog/wdt285.c:172:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-15watchdog: pnx4008_wdt: allow compile-testingArnd Bergmann
The only thing that prevents building this driver on other platforms is the mach/hardware.h include, which is not actually used here at all, so remove the line and allow CONFIG_COMPILE_TEST. Link: https://lore.kernel.org/r/20190809144043.476786-4-arnd@arndb.de Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-12watchdog: jz4740: Fix unused variable warning in jz4740_wdt_probeGustavo A. R. Silva
Fix the following warning (Building: ci20_defconfig mips): drivers/watchdog/jz4740_wdt.c: In function ‘jz4740_wdt_probe’: drivers/watchdog/jz4740_wdt.c:165:6: warning: unused variable ‘ret’ [-Wunused-variable] int ret; ^~~ Fixes: 9ee644c9326c ("watchdog: jz4740_wdt: drop warning after registering device") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190806073953.GA13685@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: riowd: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190730014650.GA31309@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: wdt977: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190729223159.GA20878@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: scx200_wdt: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190729200602.GA6854@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-12watchdog: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/ar7_wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 237:3 drivers/watchdog/pcwd.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 653:3 drivers/watchdog/sb_wdog.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 204:3 drivers/watchdog/wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 391:3 Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190729151033.GA10143@embeddedor Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-08-09watchdog: riowd: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: wdt977: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: scx200_wdt: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09watchdog: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/ar7_wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 237:3 drivers/watchdog/pcwd.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 653:3 drivers/watchdog/sb_wdog.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 204:3 drivers/watchdog/wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 391:3 Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-07-24watchdog: ath79_wdt: fix a typo in the name of a functionChristophe JAILLET
It is likely that 'ath97_wdt_shutdown()' should be 'ath79_wdt_shutdown()' Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-15watchdog: digicolor_wdt: Remove unused variable in dc_wdt_probeNathan Chancellor
clang warns: drivers/watchdog/digicolor_wdt.c:121:6: warning: unused variable 'ret' [-Wunused-variable] int ret; ^ 1 warning generated. It's unused now, remove it. Fixes: cdad26977e3f ("watchdog: digicolor_wdt: drop warning after registering device") Link: https://github.com/ClangBuiltLinux/linux/issues/591 Reported-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190709203409.117123-1-natechancellor@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: ie6xx_wdt: Use spinlock_t instead of struct spinlockSebastian Andrzej Siewior
For spinlocks the type spinlock_t should be used instead of "struct spinlock". Use spinlock_t for spinlock's definition. Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspendKen Sloat
Currently, the atmel-sama5d4-wdt continues to run after system suspend. Unless the system resumes within the watchdog timeout period so the userspace can kick it, the system will be reset. This change disables the watchdog on suspend if it is active and re-enables on resume. These actions occur during the late and early phases of suspend and resume respectively to minimize chances where a lock could occur while the watchdog is disabled. Signed-off-by: Ken Sloat <ksloat@aampglobal.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: convert remaining drivers to use SPDX license identifierGuenter Roeck
This gets rid of the unnecessary license boilerplate, and avoids having to deal with individual patches one by one. No functional changes. Reviewed-by: Jerry Hoemann <jerry.hoemann@hpe.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: mei_wdt: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-watchdog@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: bcm_kona_wdt: no need to check return value of debugfs_create ↵Greg Kroah-Hartman
functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-watchdog@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08docs: watchdog: convert docs to ReST and rename to *.rstMauro Carvalho Chehab
Convert those documents and prepare them to be part of the kernel API book, as most of the stuff there are related to the Kernel interfaces. Still, in the future, it would make sense to split the docs, as some of the stuff is clearly focused on sysadmin tasks. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: make the device time out at open_deadline when open_timeout is usedRasmus Villemoes
When the watchdog device is not open by userspace, the kernel takes care of pinging it. When the open_timeout feature is in use, we should ensure that the hardware fires close to open_timeout seconds after the kernel has assumed responsibility for the device. To do this, simply reuse the logic that is already in place for ensuring the same thing when userspace is responsible for regularly pinging the device: - When watchdog_active(wdd), this patch doesn't change anything. - When !watchdog_active(wdd), the "virtual timeout" should be taken to be ->open_deadline". When the open_timeout feature is not used or the device has been opened at least once, ->open_deadline is KTIME_MAX, and the arithmetic ends up returning keepalive_interval as we used to. This has been tested on a Wandboard with various combinations of open_timeout and timeout-sec properties for the on-board watchdog by booting with 'init=/bin/sh', timestamping the lines on the serial console, and comparing the timestamp of the 'imx2-wdt 20bc000.wdog: timeout nnn sec' line with the timestamp of the 'U-Boot SPL ...' line (which appears just after reset). Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUTRasmus Villemoes
This allows setting a default value for the watchdog.open_timeout commandline parameter via Kconfig. Some BSPs allow remote updating of the kernel image and root file system, but updating the bootloader requires physical access. Hence, if one has a firmware update that requires relaxing the watchdog.open_timeout a little, the value used must be baked into the kernel image itself and cannot come from the u-boot environment via the kernel command line. Being able to set the initial value in .config doesn't change the fact that the value on the command line, if present, takes precedence, and is of course immensely useful for development purposes while one has console acccess, as well as usable in the cases where one can make a permanent update of the kernel command line. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: introduce watchdog.open_timeout commandline parameterRasmus Villemoes
The watchdog framework takes care of feeding a hardware watchdog until userspace opens /dev/watchdogN. If that never happens for some reason (buggy init script, corrupt root filesystem or whatnot) but the kernel itself is fine, the machine stays up indefinitely. This patch allows setting an upper limit for how long the kernel will take care of the watchdog, thus ensuring that the watchdog will eventually reset the machine. A value of 0 (the default) means infinite timeout, preserving the current behaviour. This is particularly useful for embedded devices where some fallback logic is implemented in the bootloader (e.g., use a different root partition, boot from network, ...). There is already handle_boot_enabled serving a similar purpose. However, such a binary choice is unsuitable if the hardware watchdog cannot be programmed by the bootloader to provide a timeout long enough for userspace to get up and running. Many of the embedded devices we see use external (gpio-triggered) watchdogs with a fixed timeout of the order of 1-2 seconds. The open timeout only applies for the first open from userspace. Should userspace need to close the watchdog device, with the intention of re-opening it shortly, the application can emulate the open timeout feature by combining the nowayout feature with an appropriate WDIOC_SETTIMEOUT immediately prior to closing the device. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: imx_sc: Add pretimeout supportAnson Huang
i.MX system controller watchdog can support pretimeout IRQ via general SCU MU IRQ, it depends on IMX_SCU and driver MUST be probed after SCU IPC ready, then enable corresponding SCU IRQ group and register SCU IRQ notifier, when watchdog pretimeout IRQ fires, SCU MU IRQ will be handled and watchdog pretimeout notifier will be called to handle the event. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-07-08watchdog: renesas_wdt: Add a few cycles delayYoshihiro Shimoda
According to the hardware manual of R-Car Gen2 and Gen3, software should wait a few RLCK cycles as following: - Delay 2 cycles before setting watchdog counter. - Delay 3 cycles before disabling module clock. So, this patch adds such delays. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit (git 2.34.1) at 2024-05-27 07:47:36 +0000