summaryrefslogtreecommitdiff
path: root/drivers/xen/Makefile
AgeCommit message (Collapse)Author
2016-07-06Xen: ARM: Add support for mapping platform device mmioShannon Zhao
Add a bus_notifier for platform bus device in order to map the device mmio regions when DOM0 booting with ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Julien Grall <julien.grall@arm.com>
2016-05-24Xen: don't warn about 2-byte wchar_t in efiArnd Bergmann
The XEN UEFI code has become available on the ARM architecture recently, but now causes a link-time warning: ld: warning: drivers/xen/efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail This seems harmless, because the efi code only uses 2-byte characters when interacting with EFI, so we don't pass on those strings to elsewhere in the system, and we just need to silence the warning. It is not clear to me whether we actually need to build the file with the -fshort-wchar flag, but if we do, then we should also pass --no-wchar-size-warning to the linker, to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Fixes: 37060935dc04 ("ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services")
2015-12-21xen: move xen_setup_runstate_info and get_runstate_snapshot to ↵Stefano Stabellini
drivers/xen/time.c Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-10-23xen/arm: Enable cpu_hotplug.cStefano Stabellini
Build cpu_hotplug for ARM and ARM64 guests. Rename arch_(un)register_cpu to xen_(un)register_cpu and provide an empty implementation on ARM and ARM64. On x86 just call arch_(un)register_cpu as we are already doing. Initialize cpu_hotplug on ARM. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-04-24Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull initial ACPI support for arm64 from Will Deacon: "This series introduces preliminary ACPI 5.1 support to the arm64 kernel using the "hardware reduced" profile. We don't support any peripherals yet, so it's fairly limited in scope: - MEMORY init (UEFI) - ACPI discovery (RSDP via UEFI) - CPU init (FADT) - GIC init (MADT) - SMP boot (MADT + PSCI) - ACPI Kconfig options (dependent on EXPERT) ACPI for arm64 has been in development for a while now and hardware has been available that can boot with either FDT or ACPI tables. This has been made possible by both changes to the ACPI spec to cater for ARM-based machines (known as "hardware-reduced" in ACPI parlance) but also a Linaro-driven effort to get this supported on top of the Linux kernel. This pull request is the result of that work. These changes allow us to initialise the CPUs, interrupt controller, and timers via ACPI tables, with memory information and cmdline coming from EFI. We don't support a hybrid ACPI/FDT scheme. Of course, there is still plenty of work to do (a serial console would be nice!) but I expect that to happen on a per-driver basis after this core series has been merged. Anyway, the diff stat here is fairly horrible, but splitting this up and merging it via all the different subsystems would have been extremely painful. Instead, we've got all the relevant Acks in place and I've not seen anything other than trivial (Kconfig) conflicts in -next (for completeness, I've included my resolution below). Nearly half of the insertions fall under Documentation/. So, we'll see how this goes. Right now, it all depends on EXPERT and I fully expect people to use FDT by default for the immediate future" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits) ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface() ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface ARM64: kernel: acpi: honour acpi=force command line parameter ARM64: kernel: acpi: refactor ACPI tables init and checks ARM64: kernel: psci: let ACPI probe PSCI version ARM64: kernel: psci: factor out probe function ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed ARM64 / ACPI: additions of ACPI documentation for arm64 Documentation: ACPI for ARM64 ARM64 / ACPI: Enable ARM64 in Kconfig XEN / ACPI: Make XEN ACPI depend on X86 ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 clocksource / arch_timer: Parse GTDT to initialize arch timer irqchip: Add GICv2 specific ACPI boot support ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi ACPI / processor: Make it possible to get CPU hardware ID via GICC ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID ARM64 / ACPI: Parse MADT for SMP initialization ...
2015-03-26XEN / ACPI: Make XEN ACPI depend on X86Hanjun Guo
When ACPI is enabled on ARM64, XEN ACPI will also compiled into the kernel, but XEN ACPI is x86 dependent, so introduce CONFIG_XEN_ACPI to make it depend on x86 before XEN ACPI is functional on ARM64. CC: Julien Grall <julien.grall@linaro.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> CC: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-16xen: unify foreign GFN map/unmap for auto-xlated physmap guestsDavid Vrabel
Auto-translated physmap guests (arm, arm64 and x86 PVHVM/PVH) map and unmap foreign GFNs using the same method (updating the physmap). Unify the two arm and x86 implementations into one commont one. Note that on arm and arm64, the correct error code will be returned (instead of always -EFAULT) and map/unmap failure warnings are no longer printed. These changes are required if the foreign domain is paging (-ENOENT failures are expected and must be propagated up to the caller). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-02-23x86/xen: allow privcmd hypercalls to be preemptedDavid Vrabel
Hypercalls submitted by user space tools via the privcmd driver can take a long time (potentially many 10s of seconds) if the hypercall has many sub-operations. A fully preemptible kernel may deschedule such as task in any upcall called from a hypercall continuation. However, in a kernel with voluntary or no preemption, hypercall continuations in Xen allow event handlers to be run but the task issuing the hypercall will not be descheduled until the hypercall is complete and the ioctl returns to user space. These long running tasks may also trigger the kernel's soft lockup detection. Add xen_preemptible_hcall_begin() and xen_preemptible_hcall_end() to bracket hypercalls that may be preempted. Use these in the privcmd driver. When returning from an upcall, call xen_maybe_preempt_hcall() which adds a schedule point if if the current task was within a preemptible hypercall. Since _cond_resched() can move the task to a different CPU, clear and set xen_in_preemptible_hcall around the call. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-09-23xen-scsiback: Add Xen PV SCSI backend driverJuergen Gross
Introduces the Xen pvSCSI backend. With pvSCSI it is possible for a Xen domU to issue SCSI commands to a SCSI LUN assigned to that domU. The SCSI commands are passed to the pvSCSI backend in a driver domain (usually Dom0) which is owner of the physical device. This allows e.g. to use SCSI tape drives in a Xen domU. The code is taken from the pvSCSI implementation in Xen done by Fujitsu based on Linux kernel 2.6.18. Changes from the original version are: - port to upstream kernel - put all code in just one source file - adapt to Linux style guide - use target core infrastructure instead doing pure pass-through - enable module unloading - support SG-list in grant page(s) - support task abort - remove redundant struct backend - allocate resources dynamically - correct minor error in scsiback_fast_flush_area - free allocated resources in case of error during I/O preparation - remove CDB emulation, now handled by target core infrastructure Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-07-18xen: Put EFI machinery in placeDaniel Kiper
This patch enables EFI usage under Xen dom0. Standard EFI Linux Kernel infrastructure cannot be used because it requires direct access to EFI data and code. However, in dom0 case it is not possible because above mentioned EFI stuff is fully owned and controlled by Xen hypervisor. In this case all calls from dom0 to EFI must be requested via special hypercall which in turn executes relevant EFI code in behalf of dom0. When dom0 kernel boots it checks for EFI availability on a machine. If it is detected then artificial EFI system table is filled. Native EFI callas are replaced by functions which mimics them by calling relevant hypercall. Later pointer to EFI system table is passed to standard EFI machinery and it continues EFI subsystem initialization taking into account that there is no direct access to EFI boot services, runtime, tables, structures, etc. After that system runs as usual. This patch is based on Jan Beulich and Tang Liang work. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Tang Liang <liang.tang@oracle.com> Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-02-11ia64/xen: Remove Xen support for ia64 even morePaul Bolle
Commit d52eefb47d4e ("ia64/xen: Remove Xen support for ia64") removed the Kconfig symbol XEN_XENCOMM. But it didn't remove the code depending on that symbol. Remove that code now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-06xen/events: move drivers/xen/events.c into drivers/xen/events/David Vrabel
events.c will be split into multiple files so move it into its own directory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2013-07-29xen/arm: enable PV control for ARMJulien Grall
Enable lifecyle management (reboot, shutdown...) from the toolstack for ARM guests. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-07-29xen/arm64: Don't compile cpu hotplugJulien Grall
On ARM64, when CONFIG_XEN=y, the compilation will fail because CPU hotplug is not yet supported with XEN. For now, disable it. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Mark Rutland <mark.rutland@arm.com>
2013-02-19xen/acpi: ACPI cpu hotplugLiu Jinsong
This patch implement real Xen ACPI cpu hotplug driver as module. When loaded, it replaces Xen stub driver. For booting existed cpus, the driver enumerates them. For hotadded cpus, which added at runtime and notify OS via device or container event, the driver is invoked to add them, parsing cpu information, hypercalling to Xen hypervisor to add them, and finally setting up new /sys interface for them. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen/acpi: ACPI memory hotplugLiu Jinsong
This patch implements real Xen acpi memory hotplug driver as module. When loaded, it replaces Xen stub driver. When an acpi memory device hotadd event occurs, it notifies OS and invokes notification callback, adding related memory device and parsing memory information, finally hypercall to xen hypervisor to add memory. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen/stub: driver for memory hotplugLiu Jinsong
This patch create a file (xen-stub.c) for Xen stub drivers. Xen stub drivers are used to reserve space for Xen drivers, i.e. memory hotplug and cpu hotplug, and to block native drivers loaded, so that real Xen drivers can be modular and loaded on demand. This patch is specific for Xen memory hotplug (other Xen logic can add stub drivers on their own). The xen stub driver will occupied earlier via subsys_initcall (than native memory hotplug driver via module_init and so blocking native). Later real Xen memory hotplug logic will unregister the stub driver and register itself to take effect on demand. Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-12-13Merge tag 'stable/for-linus-3.8-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen updates from Konrad Rzeszutek Wilk: - Add necessary infrastructure to make balloon driver work under ARM. - Add /dev/xen/privcmd interfaces to work with ARM and PVH. - Improve Xen PCIBack wild-card parsing. - Add Xen ACPI PAD (Processor Aggregator) support - so can offline/ online sockets depending on the power consumption. - PVHVM + kexec = use an E820_RESV region for the shared region so we don't overwrite said region during kexec reboot. - Cleanups, compile fixes. Fix up some trivial conflicts due to the balloon driver now working on ARM, and there were changes next to the previous work-arounds that are now gone. * tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/PVonHVM: fix compile warning in init_hvm_pv_info xen: arm: implement remap interfaces needed for privcmd mappings. xen: correctly use xen_pfn_t in remap_domain_mfn_range. xen: arm: enable balloon driver xen: balloon: allow PVMMU interfaces to be compiled out xen: privcmd: support autotranslated physmap guests. xen: add pages parameter to xen_remap_domain_mfn_range xen/acpi: Move the xen_running_on_version_or_later function. xen/xenbus: Remove duplicate inclusion of asm/xen/hypervisor.h xen/acpi: Fix compile error by missing decleration for xen_domain. xen/acpi: revert pad config check in xen_check_mwait xen/acpi: ACPI PAD driver xen-pciback: reject out of range inputs xen-pciback: simplify and tighten parsing of device IDs xen PVonHVM: use E820_Reserved area for shared_info
2012-11-30Merge branch 'arm-privcmd-for-3.8' of ↵Konrad Rzeszutek Wilk
git://xenbits.xen.org/people/ianc/linux into stable/for-linus-3.8 * 'arm-privcmd-for-3.8' of git://xenbits.xen.org/people/ianc/linux: xen: arm: implement remap interfaces needed for privcmd mappings. xen: correctly use xen_pfn_t in remap_domain_mfn_range. xen: arm: enable balloon driver xen: balloon: allow PVMMU interfaces to be compiled out xen: privcmd: support autotranslated physmap guests. xen: add pages parameter to xen_remap_domain_mfn_range Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-29xen: arm: enable balloon driverIan Campbell
The code is now in a state where can just enable it. Drop the *_xenballloned_pages duplicates since these are now supplied by the balloon code. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-26xen/acpi: ACPI PAD driverLiu, Jinsong
PAD is acpi Processor Aggregator Device which provides a control point that enables the platform to perform specific processor configuration and control that applies to all processors in the platform. This patch is to implement Xen acpi pad logic. When running under Xen virt platform, native pad driver would not work. Instead Xen pad driver, a self-contained and thin logic level, would take over acpi pad logic. When acpi pad notify OSPM, xen pad logic intercept and parse _PUR object to get the expected idle cpu number, and then hypercall to hypervisor. Xen hypervisor would then do the rest work, say, core parking, to idle specific number of cpus on its own policy. Signed-off-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Liu Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07xen/generic: Disable fallback build on ARM.Konrad Rzeszutek Wilk
As there is no need for it (the fallback code is for older hypervisors and they only run under x86), and also b/c we get: drivers/xen/fallback.c: In function 'xen_event_channel_op_compat': drivers/xen/fallback.c:10:19: error: storage size of 'op' isn't known drivers/xen/fallback.c:15:2: error: implicit declaration of function '_hypercall1' [-Werror=implicit-function-declaration] drivers/xen/fallback.c:15:19: error: expected expression before 'int' drivers/xen/fallback.c:18:7: error: 'EVTCHNOP_close' undeclared (first use in this function) drivers/xen/fallback.c:18:7: note: each undeclared identifier is reported only once for each function it appears in .. and more [v1: Moved the enablement to be covered by CONFIG_X86 per Ian's suggestion] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-04xen/hypercall: fix hypercall fallback code for very old hypervisorsJan Beulich
While copying the argument structures in HYPERVISOR_event_channel_op() and HYPERVISOR_physdev_op() into the local variable is sufficiently safe even if the actual structure is smaller than the container one, copying back eventual output values the same way isn't: This may collide with on-stack variables (particularly "rc") which may change between the first and second memcpy() (i.e. the second memcpy() could discard that change). Move the fallback code into out-of-line functions, and handle all of the operations known by this old a hypervisor individually: Some don't require copying back anything at all, and for the rest use the individual argument structures' sizes rather than the container's. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> [v2: Reduce #define/#undef usage in HYPERVISOR_physdev_op_compat().] [v3: Fix compile errors when modules use said hypercalls] [v4: Add xen_ prefix to the HYPERCALL_..] [v5: Alter the name and only EXPORT_SYMBOL_GPL one of them] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-07Merge tag 'stable/for-linus-3.7-arm-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...
2012-10-02xen/Makefile: fix dom-y buildStefano Stabellini
We need to add $(dom0-y) to obj-$(CONFIG_XEN_DOM0) after dom0-y is defined otherwise we end up adding nothing. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-18USB EHCI/Xen: propagate controller reset information to hypervisorJan Beulich
Just like for the in-tree early console debug port driver, the hypervisor - when using a debug port based console - also needs to be told about controller resets, so it can suppress using and then re-initialize the debug port accordingly. Other than the in-tree driver, the hypervisor driver actually cares about doing this only for the device where the debug is port actually in use, i.e. it needs to be told the coordinates of the device being reset (quite obviously, leveraging the addition done for that would likely benefit the in-tree driver too). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-13xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARMStefano Stabellini
Changes in v4: - compile pcpu only on x86; - use "+=" instead of ":=" for dom0- targets. Changes in v2: - make pci.o depend on CONFIG_PCI and acpi.o depend on CONFIG_ACPI. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19xen/pcpu: Xen physical cpus online/offline sys interfaceLiu, Jinsong
This patch provide Xen physical cpus online/offline sys interface. User can use it for their own purpose, like power saving: by offlining some cpus when light workload it save power greatly. Its basic workflow is, user online/offline cpu via sys interface, then hypercall xen to implement, after done xen inject virq back to dom0, and then dom0 sync cpu status. Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19xen/mce: Add mcelog support for Xen platformLiu, Jinsong
When MCA error occurs, it would be handled by Xen hypervisor first, and then the error information would be sent to initial domain for logging. This patch gets error information from Xen hypervisor and convert Xen format error into Linux format mcelog. This logic is basically self-contained, not touching other kernel components. By using tools like mcelog tool users could read specific error information, like what they did under native Linux. To test follow directions outlined in Documentation/acpi/apei/einj.txt Acked-and-tested-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Ke, Liping <liping.ke@intel.com> Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-07xen/acpi/sleep: Enable ACPI sleep via the __acpi_os_prepare_sleepKonrad Rzeszutek Wilk
Provide the registration callback to call in the Xen's ACPI sleep functionality. This means that during S3/S5 we make a hypercall XENPF_enter_acpi_sleep with the proper PM1A/PM1B registers. Based of Ke Yu's <ke.yu@intel.com> initial idea. [ From http://xenbits.xensource.com/linux-2.6.18-xen.hg change c68699484a65 ] [v1: Added Copyright and license] [v2: Added check if PM1A/B the 16-bits MSB contain something. The spec only uses 16-bits but might have more in future] Signed-off-by: Liang Tang <liang.tang@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-14xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.Konrad Rzeszutek Wilk
This driver solves three problems: 1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the hypervisor - aka P-states (cpufreq data). 2). Upload the the Cx state information (cpuidle data). 3). Inhibit CPU frequency scaling drivers from loading. The reason for wanting to solve 1) and 2) is such that the Xen hypervisor is the only one that knows the CPU usage of different guests and can make the proper decision of when to put CPUs and packages in proper states. Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it needs help from the initial domain to provide this information. The reason for 3) is that we do not want the initial domain to change P-states while the hypervisor is doing it as well - it causes rather some funny cases of P-states transitions. For this to work, the driver parses the Power Management data and uploads said information to the Xen hypervisor. It also calls acpi_processor_notify_smm() to inhibit the other CPU frequency scaling drivers from being loaded. Everything revolves around the 'struct acpi_processor' structure which gets updated during the bootup cycle in different stages. At the startup, when the ACPI parser starts, the C-state information is processed (processor_idle) and saved in said structure as 'power' element. Later on, the CPU frequency scaling driver (powernow-k8 or acpi_cpufreq), would call the the acpi_processor_* (processor_perflib functions) to parse P-states information and populate in the said structure the 'performance' element. Since we do not want the CPU frequency scaling drivers from loading we have to call the acpi_processor_* functions to parse the P-states and call "acpi_processor_notify_smm" to stop them from loading. There is also one oddity in this driver which is that under Xen, the physical online CPU count can be different from the virtual online CPU count. Meaning that the macros 'for_[online|possible]_cpu' would process only up to virtual online CPU count. We on the other hand want to process the full amount of physical CPUs. For that, the driver checks if the ACPI IDs count is different from the APIC ID count - which can happen if the user choose to use dom0_max_vcpu argument. In such a case a backup of the PM structure is used and uploaded to the hypervisor. [v1-v2: Initial RFC implementations that were posted] [v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>] [v4: Added vCPU != pCPU support - aka dom0_max_vcpus support] [v5: Cleaned up the driver, fix bug under Athlon XP] [v6: Changed the driver to a CPU frequency governor] [v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver made me rework it as driver that inhibits cpufreq scaling driver] [v8: Per Jan's review comments, fixed up the driver] [v9: Allow to continue even if acpi_processor_preregister_perf.. fails] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-16xen: Add privcmd device driverBastian Blank
Access to arbitrary hypercalls is currently provided via xenfs. This adds a standard character device to handle this. The support in xenfs remains for backward compatibility and uses the device driver code. Signed-off-by: Bastian Blank <waldi@debian.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29xen: remove XEN_PLATFORM_PCI config optionStefano Stabellini
Xen PVHVM needs xen-platform-pci, on the other hand xen-platform-pci is useless in any other cases. Therefore remove the XEN_PLATFORM_PCI config option and compile xen-platform-pci built-in if XEN_PVHVM is selected. Changes to v1: - remove xen-platform-pci.o and just use platform-pci.o since it is not externally visible anymore. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-07-20Merge branch 'stable/xen-pciback-0.6.3' into stable/driversKonrad Rzeszutek Wilk
* stable/xen-pciback-0.6.3: xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI xen/pciback: Remove the DEBUG option. xen/pciback: Drop two backends, squash and cleanup some code. xen/pciback: Print out the MSI/MSI-X (PIRQ) values xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices. xen: rename pciback module to xen-pciback. xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases. xen/pciback: Allocate IRQ handler for device that is shared with guest. xen/pciback: Disable MSI/MSI-X when reseting a device xen/pciback: guest SR-IOV support for PV guest xen/pciback: Register the owner (domain) of the PCI device. xen/pciback: Cleanup the driver based on checkpatch warnings and errors. xen/pciback: xen pci backend driver. Conflicts: drivers/xen/Kconfig
2011-07-19xen/pciback: xen pci backend driver.Konrad Rzeszutek Wilk
This is the host side counterpart to the frontend driver in drivers/pci/xen-pcifront.c. The PV protocol is also implemented by frontend drivers in other OSes too, such as the BSDs. The PV protocol is rather simple. There is page shared with the guest, which has the 'struct xen_pci_sharedinfo' embossed in it. The backend has a thread that is kicked every-time the structure is changed and based on the operation field it performs specific tasks: XEN_PCI_OP_conf_[read|write]: Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c) Based on which field is probed, we either enable/disable the PCI device, change power state, read VPD, etc. The major goal of this call is to provide a Physical IRQ (PIRQ) to the guest. The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ is tied in to the IO-APIC, or is a vector. For GSI type interrupts, the PIRQ==GSI holds. For MSI/MSI-X the PIRQ value != Linux IRQ number (thought PIRQ==vector). Please note, that with Xen, all interrupts (except those level shared ones) are injected directly to the guest - there is no host interaction. XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c) Enables/disables the MSI/MSI-X capability of the device. These operations setup the MSI/MSI-X vectors for the guest and pass them to the frontend. When the device is activated, the interrupts are directly injected in the guest without involving the host. XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure, perform the appropriate AER commands on the guest. Right now that is a cop-out - we just kill the guest. Besides implementing those commands, it can also - hide a PCI device from the host. When booting up, the user can specify xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the device. The driver was lifted from linux-2.6.18.hg tree and fixed up so that it could compile under v3.0. Per suggestion from Jesse Barnes moved the driver to drivers/xen/xen-pciback. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-07-08Merge branch 'xen-tmem-selfballoon-v8' of ↵Konrad Rzeszutek Wilk
git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem into stable/drivers * 'xen-tmem-selfballoon-v8' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem: xen: tmem: self-ballooning and frontswap-selfshrinking
2011-07-08xen: tmem: self-ballooning and frontswap-selfshrinkingDan Magenheimer
This patch introduces two in-kernel drivers for Xen transcendent memory ("tmem") functionality that complement cleancache and frontswap. Both use control theory to dynamically adjust and optimize memory utilization. Selfballooning controls the in-kernel Xen balloon driver, targeting a goal value (vm_committed_as), thus pushing less frequently used clean page cache pages (through the cleancache code) into Xen tmem where Xen can balance needs across all VMs residing on the physical machine. Frontswap-selfshrinking controls the number of pages in frontswap, driving it towards zero (effectively doing a partial swapoff) when in-kernel memory pressure subsides, freeing up RAM for other VMs. More detail is provided in the header comment of xen-selfballooning.c. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> [v8: konrad.wilk@oracle.com: set default enablement depending on frontswap] [v7: konrad.wilk@oracle.com: fix capitalization and punctuation in comments] [v6: fix frontswap-selfshrinking initialization] [v6: konrad.wilk@oracle.com: fix init pr_infos; add comments about swap] [v5: konrad.wilk@oracle.com: add NULL to attr list; move inits up to decls] [v4: dkiper@net-space.pl: use strict_strtoul plus a few syntactic nits] [v3: konrad.wilk@oracle.com: fix potential divides-by-zero] [v3: konrad.wilk@oracle.com: add many more comments, fix nits] [v2: rebased to linux-3.0-rc1] [v2: Ian.Campbell@citrix.com: reorganize as new file (xen-selfballoon.c)] [v2: dkiper@net-space.pl: proper access to vm_committed_as] [v2: dkiper@net-space.pl: accounting fixes] Cc: Jan Beulich <JBeulich@novell.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: <xen-devel@lists.xensource.com>
2011-06-17xen: prepare tmem shim to handle frontswapDan Magenheimer
Provide the shim code for frontswap for Xen tmem even if the frontswap patchset is not present yet. (The egg is before the chicken.) Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Konrad Wilk <konrad.wilk@oracle.com>
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem: xen: cleancache shim to Xen Transcendent Memory ocfs2: add cleancache support ext4: add cleancache support btrfs: add cleancache support ext3: add cleancache support mm/fs: add hooks to support cleancache mm: cleancache core ops functions and config fs: add field to superblock to support cleancache mm/fs: cleancache documentation Fix up trivial conflict in fs/btrfs/extent_io.c due to includes
2011-05-26xen: cleancache shim to Xen Transcendent MemoryDan Magenheimer
This patch provides a shim between the kernel-internal cleancache API (see Documentation/mm/cleancache.txt) and the Xen Transcendent Memory ABI (see http://oss.oracle.com/projects/tmem). Xen tmem provides "hypervisor RAM" as an ephemeral page-oriented pseudo-RAM store for cleancache pages, shared cleancache pages, and frontswap pages. Tmem provides enterprise-quality concurrency, full save/restore and live migration support, compression and deduplication. A presentation showing up to 8% faster performance and up to 52% reduction in sectors read on a kernel compile workload, despite aggressive in-kernel page reclamation ("self-ballooning") can be found at: http://oss.oracle.com/projects/tmem/dist/documentation/presentations/TranscendentMemoryXenSummit2010.pdf Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Rik Van Riel <riel@redhat.com> Cc: Jan Beulich <JBeulich@novell.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Andreas Dilger <adilger@sun.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org>
2011-05-12xen: tidy up whitespace in drivers/xen/MakefileIan Campbell
Various merges over time have led to rather a mish-mash of indentation. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel@lists.xensource.com Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-16xen-balloon: Move core balloon functionality out of moduleDaniel De Graaf
The basic functionality of ballooning pages is useful for Xen drivers in general. Rather than require a dependency on the balloon module, split the functionality that is reused into the core. The balloon module is still required to follow ballooning requests from xenstore or to view balloon statistics in sysfs. Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-14xen-gntalloc: Userspace grant allocation driverDaniel De Graaf
This allows a userspace application to allocate a shared page for implementing inter-domain communication or device drivers. These shared pages can be mapped using the gntdev device or by the kernel in another domain. Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-13Merge branch 'stable/gntdev' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/p2m: Fix module linking error. xen p2m: clear the old pte when adding a page to m2p_override xen gntdev: use gnttab_map_refs and gnttab_unmap_refs xen: introduce gnttab_map_refs and gnttab_unmap_refs xen p2m: transparently change the p2m mappings in the m2p override xen/gntdev: Fix circular locking dependency xen/gntdev: stop using "token" argument xen: gntdev: move use of GNTMAP_contains_pte next to the map_op xen: add m2p override mechanism xen: move p2m handling to separate file xen/gntdev: add VM_PFNMAP to vma xen/gntdev: allow usermode to map granted pages xen: define gnttab_set_map_op/unmap_op Fix up trivial conflict in drivers/xen/Kconfig
2011-01-12xen: rename platform-pci module to xen-platform-pci.Ian Campbell
platform-pci is rather generic for a modular distro style kernel. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-11xen/gntdev: allow usermode to map granted pagesGerd Hoffmann
The gntdev driver allows usermode to map granted pages from other domains. This is typically used to implement a Xen backend driver in user mode. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Stefano Stabellini <Stefano.Stabellini@eu.citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-11-18xen: make evtchn's name less genericIan Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-10-27xen: register xen pci notifierWeidong Han
Register a pci notifier to add (or remove) pci devices to Xen via hypercalls. Xen needs to know the pci devices present in the system to handle pci passthrough and even MSI remapping in the initial domain. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-10-20xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.cKonrad Rzeszutek Wilk
Without this dependency we get these compile errors: linux-next-20101020/drivers/xen/biomerge.c: In function 'xen_biovec_phys_mergeable': linux-next-20101020/drivers/xen/biomerge.c:8: error: dereferencing pointer to incomplete type linux-next-20101020/drivers/xen/biomerge.c:9: error: dereferencing pointer to incomplete type linux-next-20101020/drivers/xen/biomerge.c:11: error: implicit declaration of function '__BIOVEC_PHYS_MERGEABLE' Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
2010-10-18xen: define BIOVEC_PHYS_MERGEABLE()Jeremy Fitzhardinge
Impact: allow Xen control of bio merging When running in Xen domain with device access, we need to make sure the block subsystem doesn't merge requests across pages which aren't machine physically contiguous. To do this, we define our own BIOVEC_PHYS_MERGEABLE. When CONFIG_XEN isn't enabled, or we're not running in a Xen domain, this has identical behaviour to the normal implementation. When running under Xen, we also make sure the underlying machine pages are the same or adjacent. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>