summaryrefslogtreecommitdiff
path: root/drivers/xen/events
AgeCommit message (Collapse)Author
2014-08-01xen/events: drop negativity check of unsigned parameterAndrey Utkin
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80531 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-07-31xen/events/fifo: remove a unecessary use of BM()Frediano Ziglio
Since 05a812ac474d0d6aef6d54b66bb08b81abde79c6 (xen/events/fifo: correctly align bitops), ready is an unsigned long instead of uint32_t and the BM() macro is no longer required. Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-07-31xen/events/fifo: ensure all bitops are properly aligned even on x86David Vrabel
When using the FIFO-based ABI on x86_64, if the last port is at the end of an event array page then sync_test_bit() on this port's event word will read beyond the end of the page and in certain circumstances this may fault. The fault requires the following page in the kernel's direct mapping to be not present, which would mean: a) the array page is the last page of RAM; or b) the following page is ballooned out /and/ it has been used for a foreign mapping by a kernel driver (such as netback or blkback) /and/ the grant has been unmapped. Use the infrastructure added for arm64 to ensure that all bitops operating on event words are unsigned long aligned. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org
2014-07-31xen/events/fifo: reset control block and local HEADs on resumeDavid Vrabel
When using the FIFO-based event channel ABI, if the control block or the local HEADs are not reset after resuming the guest may see stale HEAD values and will fail to traverse the FIFO correctly. This may prevent one or more VCPUs from receiving any events following a resume. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org
2014-06-04Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core irq updates from Thomas Gleixner: "The irq department delivers: - Another tree wide update to get rid of the horrible create_irq interface along with its even more horrible variants. That also gets rid of the last leftovers of the initial sparse irq hackery. arch/driver specific changes have been either acked or ignored. - A fix for the spurious interrupt detection logic with threaded interrupts. - A new ARM SoC interrupt controller - The usual pile of fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller genirq: Improve documentation to match current implementation ARM: iop13xx: fix msi support with sparse IRQ genirq: Provide !SMP stub for irq_set_affinity_notifier() irqchip: armada-370-xp: Move the devicetree binding documentation irqchip: gic: Use mask field in GICC_IAR genirq: Remove dynamic_irq mess ia64: Use irq_init_desc genirq: Replace dynamic_irq_init/cleanup genirq: Remove irq_reserve_irq[s] genirq: Replace reserve_irqs in core code s390: Avoid call to irq_reserve_irqs() s390: Remove pointless arch_show_interrupts() s390: pci: Check return value of alloc_irq_desc() proper sh: intc: Remove pointless irq_reserve_irqs() invocation x86, irq: Remove pointless irq_reserve_irqs() call genirq: Make create/destroy_irq() ia64 private tile: Use SPARSE_IRQ tile: pci: Use irq_alloc/free_hwirq() ...
2014-05-16x86: Get rid of get_nr_irqs_gsi()Thomas Gleixner
No need to expose this outside of the ioapic code. The dynamic allocations are guaranteed not to happen in the gsi space. See commit 62a08ae2a. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20140507154335.959870037@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-28xen/events/fifo: correctly align bitopsVladimir Murzin
FIFO event channels require bitops on 32-bit aligned values (the event words). Linux's bitops require unsigned long alignment which may be 64-bits. On arm64 an incorrectly unaligned access will fault. Fix this by aligning the bitops along with an adjustment for bit position and using an unsigned long for the local copy of the ready word. Cc: stable@vger.kernel.org Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Tested-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-07Xen: do hv callback accounting only on x86Arnd Bergmann
Patch 99c8b79d3c1 "xen: Add proper irq accounting for HYPERCALL vector" added a call to inc_irq_stat(irq_hv_callback_count) in common Xen code, however both the inc_irq_stat function and the irq_hv_callback_count counter are architecture specific. This makes the code build again on ARM by moving the call into the existing #ifdef CONFIG_X86. We may want to later do the same implementation on ARM that x86 has though. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org>
2014-04-07Merge commit '683b6c6f82a60fabf47012581c2cfbf1b037ab95' into ↵David Vrabel
stable/for-linus-3.15 This merge of the irq-core-for-linus branch broke the ARM build when Xen is enabled. Conflicts: drivers/xen/events/events_base.c
2014-03-18xen: add support for MSI message groupsRoger Pau Monne
Add support for MSI message groups for Xen Dom0 using the MAP_PIRQ_TYPE_MULTI_MSI pirq map type. In order to keep track of which pirq is the first one in the group all pirqs in the MSI group except for the first one have the newly introduced PIRQ_MSI_GROUP flag set. This prevents calling PHYSDEVOP_unmap_pirq on them, since the unmap must be done with the first pirq in the group. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-03-12xen: Validate online cpus in set_affinityThomas Gleixner
The user space interface does not filter out offline cpus. It merily verifies that the mask contains at least one online cpu. So the selector in the irq chip implementation needs to make sure to pick only an online cpu because otherwise: Offline Core 1 Set affinity to 0xe Selector will pick first set bit, i.e. core 1 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140304203100.978031089@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Add proper irq accounting for HYPERCALL vectorThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140223212738.808648133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Get rid of the last irq_desc abuseThomas Gleixner
Warn if any PIRQ cannot be bound to an event channel. Remove the check for irq_desc->action. This hypercall never fails in practice so we can emit a warning unconditionally. Remove a check for a valid irq desc. The only caller of xen_destroy_irq() will only do so if the irq was previously fully setup, which means the descriptor has been allocated as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Cc: David Vrabel <david.vrabel@citrix.com> Link: http://lkml.kernel.org/r/20140223212738.579581220@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04xen: Use the proper irq functionsThomas Gleixner
generic_handler_irq() already tests for !desc so use this instead of generic_handle_irq_desc(). Use irq_get_irq_data() instead of desc->irq_data. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xen <xen-devel@lists.xenproject.org> Link: http://lkml.kernel.org/r/20140223212738.222412125@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-28xen/events: remove unnecessary call to bind_evtchn_to_cpu()David Vrabel
Since bind_evtchn_to_cpu() is always called after an event channel is bound, there is no need to call it after closing an event channel. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-02-28xen/events: remove the unused resend_irq_on_evtchn()David Vrabel
resend_irq_on_evtchn() was only used by ia64 (which no longer has Xen support). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-02-11xen/events: bind all new interdomain events to VCPU0David Vrabel
Commit fc087e10734a4d3e40693fc099461ec1270b3fff (xen/events: remove unnecessary init_evtchn_cpu_bindings()) causes a regression. The kernel-side VCPU binding was not being correctly set for newly allocated or bound interdomain events. In ARM guests where 2-level events were used, this would result in no interdomain events being handled because the kernel-side VCPU masks would all be clear. x86 guests would work because the irq affinity was set during irq setup and this would set the correct kernel-side VCPU binding. Fix this by properly initializing the kernel-side VCPU binding in bind_evtchn_to_irq(). Reported-and-tested-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-10xen: delete new instances of __cpuinit usagePaul Gortmaker
Commit 1fe565517b57676884349dccfd6ce853ec338636 ("xen/events: use the FIFO-based ABI if available") added new instances of __cpuinit macro usage. We removed this a couple versions ago; we now want to remove the compat no-op stubs. Introducing new users is not what we want to see at this point in time, as it will break once the stubs are gone. Cc: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-07xen/evtchn_fifo: fix error return code in evtchn_fifo_setup()Wei Yongjun
Fix to return -ENOMEM from the error handling case instead of 0 (overwrited to 0 by the HYPERVISOR_event_channel_op call), otherwise the error condition cann't be reflected from the return value. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-06xen/pvh: Piggyback on PVHVM for event channels (v2)Mukesh Rathor
PVH is a PV guest with a twist - there are certain things that work in it like HVM and some like PV. There is a similar mode - PVHVM where we run in HVM mode with PV code enabled - and this patch explores that. The most notable PV interfaces are the XenBus and event channels. We will piggyback on how the event channel mechanism is used in PVHVM - that is we want the normal native IRQ mechanism and we will install a vector (hvm callback) for which we will call the event channel mechanism. This means that from a pvops perspective, we can use native_irq_ops instead of the Xen PV specific. Albeit in the future we could support pirq_eoi_map. But that is a feature request that can be shared with PVHVM. Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-06xen/events: use the FIFO-based ABI if availableDavid Vrabel
Implement all the event channel port ops for the FIFO-based ABI. If the hypervisor supports the FIFO-based ABI, enable it by initializing the control block for the boot VCPU and subsequent VCPUs as they are brought up and on resume. The event array is expanded as required when event ports are setup. The 'xen.fifo_events=0' command line option may be used to disable use of the FIFO-based ABI. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow event channel priority to be setDavid Vrabel
Add xen_irq_set_priority() to set an event channels priority. This function will only work with event channel ABIs that support priority (i.e., the FIFO-based ABI). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: Add the hypervisor interface for the FIFO-based event channelsDavid Vrabel
Add the hypercall sub-ops and the structures for the shared data used in the FIFO-based event channel ABI. The design document for this new ABI is available here: http://xenbits.xen.org/people/dvrabel/event-channels-H.pdf In summary, events are reported using a per-domain shared event array of event words. Each event word has PENDING, LINKED and MASKED bits and a LINK field for pointing to the next event in the event queue. There are 16 event queues (with different priorities) per-VCPU. Key advantages of this new ABI include: - Support for over 100,000 events (2^17). - 16 different event priorities. - Improved fairness in event latency through the use of FIFOs. The ABI is available in Xen 4.4 and later. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/evtchn: support more than 4096 portsDavid Vrabel
Remove the check during unbind for NR_EVENT_CHANNELS as this limits support to less than 4096 ports. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add xen_evtchn_mask_all()David Vrabel
Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: Refactor evtchn_to_irq array to be dynamically allocatedDavid Vrabel
Refactor static array evtchn_to_irq array to be dynamically allocated by implementing get and set functions for accesses to the array. Two new port ops are added: max_channels (maximum supported number of event channels) and nr_channels (number of currently usable event channels). For the 2-level ABI, these numbers are both the same as the shared data structure is a fixed size. For the FIFO ABI, these will be different as the event array is expanded dynamically. This allows more than 65000 event channels so an unsigned short is no longer sufficient for an event channel port number and unsigned int is used instead. Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add a evtchn_op for port setupDavid Vrabel
Add a hook for port-specific setup and call it from xen_irq_info_common_setup(). The FIFO-based ABIs may need to perform additional setup (expanding the event array) before a bound event channel can start to receive events. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: allow setup of irq_info to failDavid Vrabel
The FIFO-based event ABI requires additional setup of newly bound events (it may need to expand the event array) and this setup may fail. xen_irq_info_common_init() is a useful place to put this setup so allow this call to fail. This call and the other similar calls are renamed to be *_setup() to reflect that they may now fail. This failure can only occur with new event channels not on rebind. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: add struct evtchn_ops for the low-level port operationsDavid Vrabel
evtchn_ops contains the low-level operations that access the shared data structures. This allows alternate ABIs to be supported. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move 2-level specific code into its own fileDavid Vrabel
In preparation for alternative event channel ABIs, move all the functions accessing the shared data structures into their own file. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2014-01-06xen/events: move drivers/xen/events.c into drivers/xen/events/David Vrabel
events.c will be split into multiple files so move it into its own directory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
generated by cgit (git 2.34.1) at 2024-06-07 16:44:37 +0000