summaryrefslogtreecommitdiff
path: root/drivers/xen/xen-pciback
AgeCommit message (Collapse)Author
2019-07-26xen/pciback: remove set but not used variable 'old_state'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write: drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning: variable old_state set but not used [-Wunused-but-set-variable] It is never used so can be removed. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-04-23xen: xen-pciback: fix warning Using plain integer as NULL pointerHariprasad Kelam
Changes passing function argument 0 to NULL to avoid below sparse warning CHECK drivers/xen/xen-pciback/xenbus.c drivers/xen/xen-pciback/xenbus.c:700:51: warning: Using plain integer as NULL pointer Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2019-02-18xen/pciback: Don't disable PCI_COMMAND on PCI device reset.Konrad Rzeszutek Wilk
There is no need for this at all. Worst it means that if the guest tries to write to BARs it could lead (on certain platforms) to PCI SERR errors. Please note that with af6fc858a35b90e89ea7a7ee58e66628c55c776b "xen-pciback: limit guest control of command register" a guest is still allowed to enable those control bits (safely), but is not allowed to disable them and that therefore a well behaved frontend which enables things before using them will still function correctly. This is done via an write to the configuration register 0x4 which triggers on the backend side: command_write \- pci_enable_device \- pci_enable_device_flags \- do_pci_enable_device \- pcibios_enable_device \-pci_enable_resourcess [which enables the PCI_COMMAND_MEMORY|PCI_COMMAND_IO] However guests (and drivers) which don't do this could cause problems, including the security issues which XSA-120 sought to address. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-02-18xen: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/xen/xen-pciback/xenbus.c: In function ‘xen_pcibk_frontend_changed’: drivers/xen/xen-pciback/xenbus.c:545:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (xenbus_dev_is_online(xdev)) ^ drivers/xen/xen-pciback/xenbus.c:548:2: note: here case XenbusStateUnknown: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-12-17xen/pciback: Check dev_data before using itRoss Lagerwall
If pcistub_init_device fails, the release function will be called with dev_data set to NULL. Check it before using it to avoid a NULL pointer dereference. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_reg_addJia-Ju Bai
pcistub_reg_add() is never called in atomic context. pcistub_reg_add() is only called by pcistub_quirk_add, which is only set in DRIVER_ATTR(). Despite never getting called from atomic context, pcistub_reg_add() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in ↵Jia-Ju Bai
xen_pcibk_config_quirks_init xen_pcibk_config_quirks_init() is never called in atomic context. The call chains ending up at xen_pcibk_config_quirks_init() are: [1] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] xen_pcibk_config_quirks_init() <- xen_pcibk_config_init_dev() <- pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, xen_pcibk_config_quirks_init() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_device_allocJia-Ju Bai
pcistub_device_alloc() is never called in atomic context. The call chain ending up at pcistub_device_alloc() is: [1] pcistub_device_alloc() <- pcistub_seize() <- pcistub_probe() pcistub_probe() is only set as ".probe" in struct pci_driver. This function is not called in atomic context. Despite never getting called from atomic context, pcistub_device_alloc() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_init_deviceJia-Ju Bai
pcistub_init_device() is never called in atomic context. The call chain ending up at pcistub_init_device() is: [1] pcistub_init_device() <- pcistub_seize() <- pcistub_probe() [2] pcistub_init_device() <- pcistub_init_devices_late() <- xen_pcibk_init() pcistub_probe() is only set as ".probe" in struct pci_driver. xen_pcibk_init() is is only set as a parameter of module_init(). These functions are not called in atomic context. Despite never getting called from atomic context, pcistub_init_device() calls kzalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-04-16xen: xen-pciback: Replace GFP_ATOMIC with GFP_KERNEL in pcistub_probeJia-Ju Bai
pcistub_probe() is never called in atomic context. This function is only set as ".probe" in struct pci_driver. Despite never getting called from atomic context, pcistub_probe() calls kmalloc() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-28xen-pciback: relax BAR sizing write value checkJan Beulich
Just like done in d2bd05d88d ("xen-pciback: return proper values during BAR sizing") for the ROM BAR, ordinary ones also shouldn't compare the written value directly against ~0, but consider the r/o bits at the bottom (if any). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-08-28xen: xen-pciback: remove DRIVER_ATTR() usageGreg Kroah-Hartman
It's better to be explicit and use the DRIVER_ATTR_RW() and DRIVER_ATTR_RO() macros when defining a driver's sysfs file. Bonus is this fixes up a checkpatch.pl warning. This is part of a series to drop DRIVER_ATTR() from the tree entirely. Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09xen: modify xenstore watch event interfaceJuergen Gross
Today a Xenstore watch event is delivered via a callback function declared as: void (*callback)(struct xenbus_watch *, const char **vec, unsigned int len); As all watch events only ever come with two parameters (path and token) changing the prototype to: void (*callback)(struct xenbus_watch *, const char *path, const char *token); is the natural thing to do. Apply this change and adapt all users. Cc: konrad.wilk@oracle.com Cc: roger.pau@citrix.com Cc: wei.liu2@citrix.com Cc: paul.durrant@citrix.com Cc: netdev@vger.kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2016-11-07xen: make use of xenbus_read_unsigned() in xen-pcibackJuergen Gross
Use xenbus_read_unsigned() instead of xenbus_scanf() when possible. This requires to change the type of the read from int to unsigned, but this case has been wrong before: negative values are not allowed for the modified case. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: David Vrabel <david.vrabel@citrix.com>
2016-09-30xen/pciback: support driver_overrideJuergen Gross
Support the driver_override scheme introduced with commit 782a985d7af2 ("PCI: Introduce new device binding path using pci_dev.driver_override") As pcistub_probe() is called for all devices (it has to check for a match based on the slot address rather than device type) it has to check for driver_override set to "pciback" itself. Up to now for assigning a pci device to pciback you need something like: echo 0000:07:10.0 > /sys/bus/pci/devices/0000\:07\:10.0/driver/unbind echo 0000:07:10.0 > /sys/bus/pci/drivers/pciback/new_slot echo 0000:07:10.0 > /sys/bus/pci/drivers_probe while with the patch you can use the same mechanism as for similar drivers like pci-stub and vfio-pci: echo pciback > /sys/bus/pci/devices/0000\:07\:10.0/driver_override echo 0000:07:10.0 > /sys/bus/pci/devices/0000\:07\:10.0/driver/unbind echo 0000:07:10.0 > /sys/bus/pci/drivers_probe So e.g. libvirt doesn't need special handling for pciback. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-09-30xen/pciback: avoid multiple entries in slot listJuergen Gross
The Xen pciback driver has a list of all pci devices it is ready to seize. There is no check whether a to be added entry already exists. While this might be no problem in the common case it might confuse those which consume the list via sysfs. Modify the handling of this list by not adding an entry which already exists. As this will be needed later split out the list handling into a separate function. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-09-30xen/pciback: simplify pcistub device handlingJuergen Gross
The Xen pciback driver maintains a list of all its seized devices. There are two functions searching the list for a specific device with basically the same semantics just returning different structures in case of a match. Split out the search function. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop superfluous variablesJan Beulich
req_start is simply an alias of the "offset" function parameter, and req_end is being used just once in each function. (And both variables were loop invariant anyway, so should at least have got initialized outside the loop.) Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: short-circuit read path used for merging write valuesJan Beulich
There's no point calling xen_pcibk_config_read() here - all it'll do is return whatever conf_space_read() returns for the field which was found here (and which would be found there again). Also there's no point clearing tmp_val before the call. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: use const and unsigned in bar_init()Jan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: simplify determination of 64-bit memory resourceJan Beulich
Other than for raw BAR values, flags are properly separated in the internal representation. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: fold read_dev_bar() into its now single callerJan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop rom_init()Jan Beulich
It is now identical to bar_init(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen-pciback: drop unused function parameter of read_dev_bar()Jan Beulich
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-06xen: xen-pciback: Remove create_workqueueBhaktipriya Shridhar
System workqueues have been able to handle high level of concurrency for a long time now and there's no reason to use dedicated workqueues just to gain concurrency. Replace dedicated xen_pcibk_wq with the use of system_wq. Unlike a dedicated per-cpu workqueue created with create_workqueue(), system_wq allows multiple work items to overlap executions even on the same CPU; however, a per-cpu workqueue doesn't have any CPU locality or global ordering guarantees unless the target CPU is explicitly specified and thus the increase of local concurrency shouldn't make any difference. Since the work items could be pending, flush_work() has been used in xen_pcibk_disconnect(). xen_pcibk_xenbus_remove() calls free_pdev() which in turn calls xen_pcibk_disconnect() for every pdev to ensure that there is no pending task while disconnecting the driver. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-06-24xen-pciback: return proper values during BAR sizingJan Beulich
Reads following writes with all address bits set to 1 should return all changeable address bits as one, not the BAR size (nor, as was the case for the upper half of 64-bit BARs, the high half of the region's end address). Presumably this didn't cause any problems so far because consumers use the value to calculate the size (usually via val & -val), and do nothing else with it. But also consider the exception here: Unimplemented BARs should always return all zeroes. And finally, the check for whether to return the sizing address on read for the ROM BAR should ignore all non-address bits, not just the ROM Enable one. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-06-23xen/pciback: Fix conf_space read/write overlap check.Andrey Grodzovsky
Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-22Merge tag 'for-linus-4.6-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.6: - Make earlyprintk=xen work for HVM guests - Remove module support for things never built as modules" * tag 'for-linus-4.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drivers/xen: make platform-pci.c explicitly non-modular drivers/xen: make sys-hypervisor.c explicitly non-modular drivers/xen: make xenbus_dev_[front/back]end explicitly non-modular drivers/xen: make [xen-]ballon explicitly non-modular xen: audit usages of module.h ; remove unnecessary instances xen/x86: Drop mode-selecting ifdefs in startup_xen() xen/x86: Zero out .bss for PV guests hvc_xen: make early_printk work with HVM guests hvc_xen: fix xenboot for DomUs hvc_xen: add earlycon support
2016-03-21xen: audit usages of module.h ; remove unnecessary instancesPaul Gortmaker
Code that uses no modular facilities whatsoever should not be sourcing module.h at all, since that header drags in a bunch of other headers with it. Similarly, code that is not explicitly using modular facilities like module_init() but only is declaring module_param setup variables should be using moduleparam.h and not the larger module.h file for that. In making this change, we also uncover an implicit use of BUG() in inline fcns within arch/arm/include/asm/xen/hypercall.h so we explicitly source <linux/bug.h> for that file now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-02-15xen/pciback: Save the number of MSI-X entries to be copied later.Konrad Rzeszutek Wilk
Commit 8135cf8b092723dbfcc611fe6fdcb3a36c9951c5 (xen/pciback: Save xen_pci_op commands before processing it) broke enabling MSI-X because it would never copy the resulting vectors into the response. The number of vectors requested was being overwritten by the return value (typically zero for success). Save the number of vectors before processing the op, so the correct number of vectors are copied afterwards. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-02-15xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORYKonrad Rzeszutek Wilk
Commit 408fb0e5aa7fda0059db282ff58c3b2a4278baa0 (xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set) prevented enabling MSI-X on passed-through virtual functions, because it checked the VF for PCI_COMMAND_MEMORY but this is not a valid bit for VFs. Instead, check the physical function for PCI_COMMAND_MEMORY. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-18xen-pciback: fix up cleanup path when alloc failsDoug Goldstein
When allocating a pciback device fails, clear the private field. This could lead to an use-after free, however the 'really_probe' takes care of setting dev_set_drvdata(dev, NULL) in its failure path (which we would exercise if the ->probe function failed), so we we are OK. However lets be defensive as the code can change. Going forward we should clean up the pci_set_drvdata(dev, NULL) in the various code-base. That will be for another day. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Jonathan Creekmore <jonathan.creekmore@gmail.com> Signed-off-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set.Konrad Rzeszutek Wilk
commit f598282f51 ("PCI: Fix the NIU MSI-X problem in a better way") teaches us that dealing with MSI-X can be troublesome. Further checks in the MSI-X architecture shows that if the PCI_COMMAND_MEMORY bit is turned of in the PCI_COMMAND we may not be able to access the BAR (since they are memory regions). Since the MSI-X tables are located in there.. that can lead to us causing PCIe errors. Inhibit us performing any operation on the MSI-X unless the MEMORY bit is set. Note that Xen hypervisor with: "x86/MSI-X: access MSI-X table only after having enabled MSI-X" will return: xen_pciback: 0000:0a:00.1: error -6 enabling MSI-X for guest 3! When the generic MSI code tries to setup the PIRQ without MEMORY bit set. Which means with later versions of Xen (4.6) this patch is not neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has ↵Konrad Rzeszutek Wilk
MSI(X) enabled. Otherwise just continue on, returning the same values as previously (return of 0, and op->result has the PIRQ value). This does not change the behavior of XEN_PCI_OP_disable_msi[|x]. The pci_disable_msi or pci_disable_msix have the checks for msi_enabled or msix_enabled so they will error out immediately. However the guest can still call these operations and cause us to disable the 'ack_intr'. That means the backend IRQ handler for the legacy interrupt will not respond to interrupts anymore. This will lead to (if the device is causing an interrupt storm) for the Linux generic code to disable the interrupt line. Naturally this will only happen if the device in question is plugged in on the motherboard on shared level interrupt GSI. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Do not install an IRQ handler for MSI interrupts.Konrad Rzeszutek Wilk
Otherwise an guest can subvert the generic MSI code to trigger an BUG_ON condition during MSI interrupt freeing: for (i = 0; i < entry->nvec_used; i++) BUG_ON(irq_has_action(entry->irq + i)); Xen PCI backed installs an IRQ handler (request_irq) for the dev->irq whenever the guest writes PCI_COMMAND_MEMORY (or PCI_COMMAND_IO) to the PCI_COMMAND register. This is done in case the device has legacy interrupts the GSI line is shared by the backend devices. To subvert the backend the guest needs to make the backend to change the dev->irq from the GSI to the MSI interrupt line, make the backend allocate an interrupt handler, and then command the backend to free the MSI interrupt and hit the BUG_ON. Since the backend only calls 'request_irq' when the guest writes to the PCI_COMMAND register the guest needs to call XEN_PCI_OP_enable_msi before any other operation. This will cause the generic MSI code to setup an MSI entry and populate dev->irq with the new PIRQ value. Then the guest can write to PCI_COMMAND PCI_COMMAND_MEMORY and cause the backend to setup an IRQ handler for dev->irq (which instead of the GSI value has the MSI pirq). See 'xen_pcibk_control_isr'. Then the guest disables the MSI: XEN_PCI_OP_disable_msi which ends up triggering the BUG_ON condition in 'free_msi_irqs' as there is an IRQ handler for the entry->irq (dev->irq). Note that this cannot be done using MSI-X as the generic code does not over-write dev->irq with the MSI-X PIRQ values. The patch inhibits setting up the IRQ handler if MSI or MSI-X (for symmetry reasons) code had been called successfully. P.S. Xen PCIBack when it sets up the device for the guest consumption ends up writting 0 to the PCI_COMMAND (see xen_pcibk_reset_device). XSA-120 addendum patch removed that - however when upstreaming said addendum we found that it caused issues with qemu upstream. That has now been fixed in qemu upstream. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or ↵Konrad Rzeszutek Wilk
MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msix b) XEN_PCI_OP_enable_msix results in hitting an NULL pointer due to using freed pointers. The device passed in the guest MUST have MSI-X capability. The a) constructs and SysFS representation of MSI and MSI groups. The b) adds a second set of them but adding in to SysFS fails (duplicate entry). 'populate_msi_sysfs' frees the newly allocated msi_irq_groups (note that in a) pdev->msi_irq_groups is still set) and also free's ALL of the MSI-X entries of the device (the ones allocated in step a) and b)). The unwind code: 'free_msi_irqs' deletes all the entries and tries to delete the pdev->msi_irq_groups (which hasn't been set to NULL). However the pointers in the SysFS are already freed and we hit an NULL pointer further on when 'strlen' is attempted on a freed pointer. The patch adds a simple check in the XEN_PCI_OP_enable_msix to guard against that. The check for msi_enabled is not stricly neccessary. This is part of XSA-157 CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or ↵Konrad Rzeszutek Wilk
MSI-X enabled The guest sequence of: a) XEN_PCI_OP_enable_msi b) XEN_PCI_OP_enable_msi c) XEN_PCI_OP_disable_msi results in hitting an BUG_ON condition in the msi.c code. The MSI code uses an dev->msi_list to which it adds MSI entries. Under the above conditions an BUG_ON() can be hit. The device passed in the guest MUST have MSI capability. The a) adds the entry to the dev->msi_list and sets msi_enabled. The b) adds a second entry but adding in to SysFS fails (duplicate entry) and deletes all of the entries from msi_list and returns (with msi_enabled is still set). c) pci_disable_msi passes the msi_enabled checks and hits: BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); and blows up. The patch adds a simple check in the XEN_PCI_OP_enable_msi to guard against that. The check for msix_enabled is not stricly neccessary. This is part of XSA-157. CC: stable@vger.kernel.org Reviewed-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-18xen/pciback: Save xen_pci_op commands before processing itKonrad Rzeszutek Wilk
Double fetch vulnerabilities that happen when a variable is fetched twice from shared memory but a security check is only performed the first time. The xen_pcibk_do_op function performs a switch statements on the op->cmd value which is stored in shared memory. Interestingly this can result in a double fetch vulnerability depending on the performed compiler optimization. This patch fixes it by saving the xen_pci_op command before processing it. We also use 'barrier' to make sure that the compiler does not perform any optimization. This is part of XSA155. CC: stable@vger.kernel.org Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-04-29xen-pciback: Add name prefix to global 'permissive' variableBen Hutchings
The variable for the 'permissive' module parameter used to be static but was recently changed to be extern. This puts it in the kernel global namespace if the driver is built-in, so its name should begin with a prefix identifying the driver. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: af6fc858a35b ("xen-pciback: limit guest control of command register") Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-04-15xenbus_client: Extend interface to support multi-page ringWei Liu
Originally Xen PV drivers only use single-page ring to pass along information. This might limit the throughput between frontend and backend. The patch extends Xenbus driver to support multi-page ring, which in general should improve throughput if ring is the bottleneck. Changes to various frontend / backend to adapt to the new interface are also included. Affected Xen drivers: * blkfront/back * netfront/back * pcifront/back * scsifront/back * vtpmfront The interface is documented, as before, in xenbus_client.c. Signed-off-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Bob Liu <bob.liu@oracle.com> Cc: Konrad Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-16xen-pciback: also support disabling of bus-mastering and memory-write-invalidateJan Beulich
It's not clear to me why only the enabling operation got handled so far. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-16xen/pciback: Don't print scary messages when unsupported by hypervisor.Konrad Rzeszutek Wilk
We print at the warninig level messages such as: pciback 0000:90:00.5: MSI-X preparation failed (-38) which is due to the hypervisor not supporting this sub-hypercall (which was added in Xen 4.3). Instead of having scary messages all the time - only have it when the hypercall is actually supported. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-11xen-pciback: limit guest control of command registerJan Beulich
Otherwise the guest can abuse that control to cause e.g. PCIe Unsupported Request responses by disabling memory and/or I/O decoding and subsequently causing (CPU side) accesses to the respective address ranges, which (depending on system configuration) may be fatal to the host. Note that to alter any of the bits collected together as PCI_COMMAND_GUEST permissive mode is now required to be enabled globally or on the specific device. This is CVE-2015-2150 / XSA-120. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen-pciback: drop SR-IOV VFs when PF driver unloadsJan Beulich
When a PF driver unloads, it may find it necessary to leave the VFs around simply because of pciback having marked them as assigned to a guest. Utilize a suitable notification to let go of the VFs, thus allowing the PF to go back into the state it was before its driver loaded (which in particular allows the driver to be loaded again with it being able to create the VFs anew, but which also allows to then pass through the PF instead of the VFs). Don't do this however for any VFs currently in active use by a guest. Signed-off-by: Jan Beulich <jbeulich@suse.com> [v2: Removed the switch statement, moved it about] [v3: Redid it a bit differently] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen/pciback: Restore configuration space when detaching from a guest.Konrad Rzeszutek Wilk
The commit "xen/pciback: Don't deadlock when unbinding." was using the version of pci_reset_function which would lock the device lock. That is no good as we can dead-lock. As such we swapped to using the lock-less version and requiring that the callers of 'pcistub_put_pci_dev' take the device lock. And as such this bug got exposed. Using the lock-less version is OK, except that we tried to use 'pci_restore_state' after the lock-less version of __pci_reset_function_locked - which won't work as 'state_saved' is set to false. Said 'state_saved' is a toggle boolean that is to be used by the sequence of a) pci_save_state/pci_restore_state or b) pci_load_and_free_saved_state/pci_restore_state. We don't want to use a) as the guest might have messed up the PCI configuration space and we want it to revert to the state when the PCI device was binded to us. Therefore we pick b) to restore the configuration space. We restore from our 'golden' version of PCI configuration space, when an: - Device is unbinded from pciback - Device is detached from a guest. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen/pciback: Remove tons of dereferencesKonrad Rzeszutek Wilk
A little cleanup. No functional difference. Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen/pciback: Print out the domain owning the device.Konrad Rzeszutek Wilk
We had been printing it only if the device was built with debug enabled. But this information is useful in the field to troubleshoot. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04xen/pciback: Include the domain id if removing the device whilst still in useKonrad Rzeszutek Wilk
Cleanup the function a bit - also include the id of the domain that is using the device. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>