| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
|
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series for booting as a PVH guest, doing some cleanups after the
previous work to make PVH boot code position independent
- a fix of the xenbus driver avoiding a leak in an error case
* tag 'for-linus-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
x86/pvh: Avoid absolute symbol references in .head.text
x86/xen: Avoid relocatable quantities in Xen ELF notes
x86/pvh: Omit needless clearing of phys_base
x86/pvh: Use correct size value in GDT descriptor
x86/pvh: Call C code via the kernel virtual mapping
|
|
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
|
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes: 4bac07c993d0 ("xen: add the Xenbus sysfs and virtual device hotplug driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241105130919.4621-1-chenqiuji666@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
in all of those failure exits prior to fdget() are plain returns and
the only thing done after fdput() is (on failure exits) a kfree(),
which can be done before fdput() just fine.
NOTE: in acrn_irqfd_assign() 'fail:' failure exit is wrong for
eventfd_ctx_fileget() failure (we only want fdput() there) and once
we stop doing that, it doesn't need to check if eventfd is NULL or
ERR_PTR(...) there.
NOTE: in privcmd we move fdget() up before the allocation - more
to the point, before the copy_from_user() attempt.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
just call it, same as privcmd_ioeventfd_deassign() does...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition, that
dependency causes xen-privcmd can't be loaded on domU, because dependent
xen-pciback isn't always be loaded successfully on domU.
To solve above problem, remove that dependency, and do not call
pcistub_get_gsi_from_sbdf() directly, instead add a hook in
drivers/xen/apci.c, xen-pciback register the real call function, then in
privcmd_ioctl_pcidev_get_gsi call that hook.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241012084537.1543059-1-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Use the irq_get_nr_irqs() function instead of the global variable
'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global
variable into a variable with file scope.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-20-bvanassche@acm.org
|
|
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition,
referring to CONFIG_XEN_PCIDEV_BACKEND. In Kconfig files, one refers to
config options without the CONFIG prefix, though. So in its current form,
this does not create the reverse dependency as intended, but is an
attribute with no effect.
Refer to the intended config option XEN_PCIDEV_BACKEND in the XEN_PRIVCMD
definition.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240930090650.429813-1-lukas.bulwahn@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"A second round of Xen related changes and features:
- a small fix of the xen-pciback driver for a warning issued by
sparse
- support PCI passthrough when using a PVH dom0
- enable loading the kernel in PVH mode at arbitrary addresses,
avoiding conflicts with the memory map when running as a Xen dom0
using the host memory layout"
* tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pvh: Add 64bit relocation page tables
x86/kernel: Move page table macros to header
x86/pvh: Set phys_base when calling xen_prepare_pvh()
x86/pvh: Make PVH entrypoint PIC for x86-64
xen: sync elfnote.h from xen tree
xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t
xen/privcmd: Add new syscall to get gsi from dev
xen/pvh: Setup gsi for passthrough device
xen/pci: Add a function to reset device for xen
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fix the following sparse warning by applying
__force cast to pci_ers_result_t and pci_power_t.
drivers/xen/xen-pciback/pci_stub.c:760:16: sparse: warning: cast to restricted pci_ers_result_t
drivers/xen/xen-pciback/conf_space_capability.c:125:22: sparse: warning: cast to restricted pci_power_t
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240917233653.61630-1-minhuadotchen@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current linux codes, there is no method to get gsi
for userspace.
For above purpose, record gsi of pcistub devices when init
pcistub and add a new syscall into privcmd to let userspace
can get gsi when they have a need.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-4-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In PVH dom0, the gsis don't get registered, but the gsi of
a passthrough device must be configured for it to be able to be
mapped into a domU.
When assigning a device to passthrough, proactively setup the gsi
of the device during that process.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-3-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When device on dom0 side has been reset, the vpci on Xen side
won't get notification, so that the cached state in vpci is
all out of date with the real device state.
To solve that problem, add a new function to clear all vpci
device state when device is reset on dom0 side.
And call that function in pcistub_init_device. Because when
using "pci-assignable-add" to assign a passthrough device in
Xen, it will reset passthrough device and the vpci state will
out of date, and then device will fail to restore bar state.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-2-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
|
The allocated size in xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() is calculated wrong for the case of
XEN_PAGE_SIZE not matching PAGE_SIZE. Fix that.
Fixes: 7250f422da04 ("xen-swiotlb: use actually allocated size on check physical continuous")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When checking a memory buffer to be consecutive in machine memory,
the alignment needs to be checked, too. Failing to do so might result
in DMA memory not being aligned according to its requested size,
leading to error messages like:
4xxx 0000:2b:00.0: enabling device (0140 -> 0142)
4xxx 0000:2b:00.0: Ring address not aligned
4xxx 0000:2b:00.0: Failed to initialise service qat_crypto
4xxx 0000:2b:00.0: Resetting device qat_dev0
4xxx: probe of 0000:2b:00.0 failed with error -14
Fixes: 9435cce87950 ("xen/swiotlb: Add support for 64KB page granularity")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with this, fix the following warning:
drivers/xen/pci.c:48:55: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Message-ID: <ZsU58MvoYEEqBHZl@elsanto>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro utilizes the __force and __must_check modifiers, which instruct
the compiler to verify for errors at the locations where it is employed.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240829084710.30312-1-shenlichuan@vivo.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
|
|
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce duplicate swiotlb pool lookups (Michael Kelley)
- minor small fixes (Yicong Yang, Yang Li)
* tag 'dma-mapping-6.11-2024-07-19' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix kernel-doc description for swiotlb_del_transient
swiotlb: reduce swiotlb pool lookups
dma-mapping: benchmark: Don't starve others when doing the test
|
|
With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair
in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple
places, the pool is found and used in one function, and then must
be found again in the next function that is called because only the
tlb_addr is passed as an argument. These are the six call sites:
dma_direct_map_page:
1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce
dma_direct_unmap_page:
2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer
3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu ->
swiotlb_bounce
4. is_swiotlb_buffer
5. swiotlb_tbl_unmap_single -> swiotlb_del_transient
6. swiotlb_tbl_unmap_single -> swiotlb_release_slots
Reduce the number of calls by finding the pool at a higher level, and
passing it as an argument instead of searching again. A key change is
for is_swiotlb_buffer() to return a pool pointer instead of a boolean,
and then pass this pool pointer to subsequent swiotlb functions.
There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer
is a swiotlb buffer before calling a swiotlb function. To reduce code
duplication in getting the pool pointer and passing it as an argument,
introduce inline wrappers for this pattern. The generated code is
essentially unchanged.
Since is_swiotlb_buffer() no longer returns a boolean, rename some
functions to reflect the change:
* swiotlb_find_pool() becomes __swiotlb_find_pool()
* is_swiotlb_buffer() becomes swiotlb_find_pool()
* is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool()
With these changes, a round-trip map/unmap pair requires only 2 pool
lookups (listed using the new names and wrappers):
dma_direct_unmap_page:
1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool
2. swiotlb_tbl_unmap_single -> swiotlb_find_pool
These changes come from noticing the inefficiencies in a code review,
not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC,
__swiotlb_find_pool() is not trivial, and it uses an RCU read lock,
so avoiding the redundant calls helps performance in a hot path.
When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction
is minimal and the perf benefits are likely negligible, but no
harm is done.
No functional change is intended.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
instead of PageReserved()
We currently initialize the memmap such that PG_reserved is set and the
refcount of the page is 1. In virtio-mem code, we have to manually clear
that PG_reserved flag to make memory offlining with partially hotplugged
memory blocks possible: has_unmovable_pages() would otherwise bail out on
such pages.
We want to avoid PG_reserved where possible and move to typed pages
instead. Further, we want to further enlighten memory offlining code
about PG_offline: offline pages in an online memory section. One example
is handling managed page count adjustments in a cleaner way during memory
offlining.
So let's initialize the pages with PG_offline instead of PG_reserved.
generic_online_page()->__free_pages_core() will now clear that flag before
handing that memory to the buddy.
Note that the page refcount is still 1 and would forbid offlining of such
memory except when special care is take during GOING_OFFLINE as currently
only implemented by virtio-mem.
With this change, we can now get non-PageReserved() pages in the XEN
balloon list. From what I can tell, that can already happen via
decrease_reservation(), so that should be fine.
HV-balloon should not really observe a change: partial online memory
blocks still cannot get surprise-offlined, because the refcount of these
PageOffline() pages is 1.
Update virtio-mem, HV-balloon and XEN-balloon code to be aware that
hotplugged pages are now PageOffline() instead of PageReserved() before
they are handed over to the buddy.
We'll leave the ZONE_DEVICE case alone for now.
Note that self-hosted vmemmap pages will no longer be marked as
reserved. This matches ordinary vmemmap pages allocated from the buddy
during memory hotplug. Now, really only vmemmap pages allocated from
memblock during early boot will be marked reserved. Existing
PageReserved() checks seem to be handling all relevant cases correctly
even after this change.
Link: https://lkml.kernel.org/r/20240607090939.89524-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de> [generic memory-hotplug bits]
Cc: Alexander Potapenko <glider@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Marco Elver <elver@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and
privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd
created and added to the irqfds_list by privcmd_irqfd_assign() may get
removed by another thread executing privcmd_irqfd_deassign(), while the
former is still using it after dropping the locks.
This can lead to a situation where an already freed kirqfd instance may
be accessed and cause kernel oops.
Use SRCU locking to prevent the same, as is done for the KVM
implementation for irqfds.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/9e884af1f1f842eacbb7afc5672c8feb4dea7f3f.1718703669.git.viresh.kumar@linaro.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
irqfd_wakeup() gets EPOLLHUP, when it is called by
eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which
gets called under spin_lock_irqsave(). We can't use a mutex here as it
will lead to a deadlock.
Fix it by switching over to a spin lock.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/a66d7a7a9001424d432f52a9fc3931a1f345464f.1718703669.git.viresh.kumar@linaro.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/xen/xen-pciback/xen-pciback.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/xen/xen-evtchn.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/xen/xen-privcmd.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240611-md-drivers-xen-v1-1-1eb677364ca6@quicinc.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
'struct shutdown_handler' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7043 788 8 7839 1e9f drivers/xen/manage.o
After:
=====
text data bss dec hex filename
7164 676 8 7848 1ea8 drivers/xen/manage.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/ca1e75f66aed43191cf608de6593c7d6db9148f1.1719134768.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a small cleanup in the drivers/xen/xenbus Makefile
- a fix of the Xen xenstore driver to improve connecting to a late
started Xenstore
- an enhancement for better support of ballooning in PVH guests
- a cleanup using try_cmpxchg() instead of open coding it
* tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen: Improve the late XenStore init protocol
xen/xenbus: Use *-y instead of *-objs in Makefile
xen/x86: add extra pages to unpopulated-alloc if available
locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry()
|
|
Currently, the late XenStore init protocol is only triggered properly
for the case that HVM_PARAM_STORE_PFN is ~0ULL (invalid). For the
case that XenStore interface is allocated but not ready (the connection
status is not XENSTORE_CONNECTED), Linux should also wait until the
XenStore is set up properly.
Introduce a macro to describe the XenStore interface is ready, use
it in xenbus_probe_initcall() to select the code path of doing the
late XenStore init protocol or not. Since now we have more than one
condition for XenStore late init, rework the check in xenbus_probe()
for the free_irq().
Take the opportunity to enhance the check of the allocated XenStore
interface can be properly mapped, and return error early if the
memremap() fails.
Fixes: 5b3353949e89 ("xen: add support for initializing xenstore later as HVM domain")
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20240517011516.1451087-1-xin.wang2@amd.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240508152658.1445809-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Rather than pass in flags, error pointer, and whether this is a kernel
invocation or not, add a struct proto_accept_arg struct as the argument.
This then holds all of these arguments, and prepares accept for being
able to pass back more information.
No functional changes in this patch.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently swiotlb_tbl_map_single() takes alloc_align_mask and
alloc_size arguments to specify an swiotlb allocation that is larger
than mapping_size. This larger allocation is used solely by
iommu_dma_map_single() to handle untrusted devices that should not have
DMA visibility to memory pages that are partially used for unrelated
kernel data.
Having two arguments to specify the allocation is redundant. While
alloc_align_mask naturally specifies the alignment of the starting
address of the allocation, it can also implicitly specify the size
by rounding up the mapping_size to that alignment.
Additionally, the current approach has an edge case bug.
iommu_dma_map_page() already does the rounding up to compute the
alloc_size argument. But swiotlb_tbl_map_single() then calculates the
alignment offset based on the DMA min_align_mask, and adds that offset to
alloc_size. If the offset is non-zero, the addition may result in a value
that is larger than the max the swiotlb can allocate. If the rounding up
is done _after_ the alignment offset is added to the mapping_size (and
the original mapping_size conforms to the value returned by
swiotlb_max_mapping_size), then the max that the swiotlb can allocate
will not be exceeded.
In view of these issues, simplify the swiotlb_tbl_map_single() interface
by removing the alloc_size argument. Most call sites pass the same value
for mapping_size and alloc_size, and they pass alloc_align_mask as zero.
Just remove the redundant argument from these callers, as they will see
no functional change. For iommu_dma_map_page() also remove the alloc_size
argument, and have swiotlb_tbl_map_single() compute the alloc_size by
rounding up mapping_size after adding the offset based on min_align_mask.
This has the side effect of fixing the edge case bug but with no other
functional change.
Also add a sanity test on the alloc_align_mask. While IOMMU code
currently ensures the granule is not larger than PAGE_SIZE, if that
guarantee were to be removed in the future, the downstream effect on the
swiotlb might go unnoticed until strange allocation failures occurred.
Tested on an ARM64 system with 16K page size and some kernel test-only
hackery to allow modifying the DMA min_align_mask and the granule size
that becomes the alloc_align_mask. Tested these combinations with a
variety of original memory addresses and sizes, including those that
reproduce the edge case bug:
* 4K granule and 0 min_align_mask
* 4K granule and 0xFFF min_align_mask (4K - 1)
* 16K granule and 0xFFF min_align_mask
* 64K granule and 0xFFF min_align_mask
* 64K granule and 0x3FFF min_align_mask (16K - 1)
With the changes, all combinations pass.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Petr Tesarik <petr@tesarici.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
After redefining alloc_pages, all uses of that name are being replaced.
Change the conflicting names to prevent preprocessor from replacing them
when it's not intended.
Link: https://lkml.kernel.org/r/20240321163705.3067592-18-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- Xen event channel handling fix for a regression with a rare kernel
config and some added hardening
- better support of running Xen dom0 in PVH mode
- a cleanup for the xen grant-dma-iommu driver
* tag 'for-linus-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: increment refcnt only if event channel is refcounted
xen/evtchn: avoid WARN() when unbinding an event channel
x86/xen: attempt to inflate the memory balloon on PVH
xen/grant-dma-iommu: Convert to platform remove callback returning void
|
|
In bind_evtchn_to_irq_chip() don't increment the refcnt of the event
channel blindly. In case the event channel is NOT refcounted, issue a
warning instead.
Add an additional safety net by doing the refcnt increment only if the
caller has specified IRQF_SHARED in the irqflags parameter.
Fixes: 9e90e58c11b7 ("xen: evtchn: Allow shared registration of IRQ handers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20240313071409.25913-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When unbinding a user event channel, the related handler might be
called a last time in case the kernel was built with
CONFIG_DEBUG_SHIRQ. This might cause a WARN() in the handler.
Avoid that by adding an "unbinding" flag to struct user_event which
will short circuit the handler.
Fixes: 9e90e58c11b7 ("xen: evtchn: Allow shared registration of IRQ handers")
Reported-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Tested-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20240313071409.25913-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When running as PVH or HVM Linux will use holes in the memory map as scratch
space to map grants, foreign domain pages and possibly miscellaneous other
stuff. However the usage of such memory map holes for Xen purposes can be
problematic. The request of holesby Xen happen quite early in the kernel boot
process (grant table setup already uses scratch map space), and it's possible
that by then not all devices have reclaimed their MMIO space. It's not
unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO
window memory, which (as expected) causes quite a lot of issues in the system.
At least for PVH dom0 we have the possibility of using regions marked as
UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the
native memory map, or it has been converted into UNUSABLE in order to hide RAM
regions from dom0, the second stage translation page-tables can populate those
areas without issues.
PV already has this kind of logic, where the balloon driver is inflated at
boot. Re-use the current logic in order to also inflate it when running as
PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to
RAM, while reserving them using xen_add_extra_mem() (which is also moved so
it's no longer tied to CONFIG_PV).
[jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240220174341.56131-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240307181135.191192-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Juergen Gross <jgross@suse.com>
|
