summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-01-05iio: imu: kmx61: Drop unused device parameterDaniel Baluta
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-05iio: imu: kmx61: Fixup parameters alignmentDaniel Baluta
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-05iio: imu: kmx61: Enhance error handlingDaniel Baluta
This fixes parts of kmx61 error handling to make code easier to read and to be more consistent with IIO coding conventions: * prefer as single point for error handling instead of duplicating code for each function * directly return a value from a case branch instead of breaking * fix error message for writing REG_CTRL1 Also, add separate error paths for kmx61_trigger_setup/iio_triggered_buffer_setup calls. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-05iio: imu: kmx61: Don't ignore kmx61_set_power_state errorsDaniel Baluta
..except while in an error handler, where there is nothing to be done anyway. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-05iio: imu: kmx61: Save odr_bits for later useDaniel Baluta
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-05iio: inkern: add out of range error messageStefan Wahren
If the DT contains an invalid channel specifier then the probe of iio_hwmon fails with the following message: iio_hwmon: probe of iio_hwmon failed with error -22 So it's better to print out the relevant channel specifier in error case to locate the problem. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-05iio: driver for Semtech SX9500 proximity solutionVlad Dogaru
Supports buffering, IIO events and changing sampling frequency. Datasheet available at: http://www.semtech.com/images/datasheet/sx9500_ag.pdf Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01staging: iio: dummy: fix compile error when not using bufferingVlad Dogaru
Commit 4ae03019923f ("staging:iio:dummy: Register same channels for device and buffer") has changed the number of parameters for iio_simple_dummy_configure_buffer() only for the IIO_SIMPLE_DUMMY_BUFFER case. Fix this by also changing the placeholder function declared in the header when buffering is not enabled. Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: frequency: ad9523: Increase sleep time in ad9523_store_eepromRoberta Dobrescu
This patch increases sleep time in ad9523_store_eeprom to 20ms since it isn't timing critical. It fixes the following checkpatch.pl warning: WARNING: msleep < 20ms can sleep for up to 20ms Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: amplifiers: ad8366: Use right order for type specificationRoberta Dobrescu
This patch fixes the following checkpatch.pl warning: WARNING: type 'char unsigned' should be specified in [[un]signed] [short|int|long|long long] order Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: amplifiers: ad8366: Remove space before ','Roberta Dobrescu
This patch fixes the following checkpatch.pl error: ERROR: space prohibited before that ',' (ctx:WxW) Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: light: lm3533-als: Remove space before ','Roberta Dobrescu
This patch fixes the following checkpatch.pl error: ERROR: space prohibited before that ',' (ctx:WxE) Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: light: Annotate Kconfig entry with module name informationRoberta Dobrescu
This patch fixes the following checkpatch.pl warning: WARNING: please write a paragraph that describes the config symbol fully Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: accel: Annotate Kconfig entries with module name informationRoberta Dobrescu
This patch fixes the following checkpatch.pl warning: WARNING: please write a paragraph that describes the config symbol fully Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: accel: mma8452: Remove trailing whitespaceRoberta Dobrescu
This patch fixes the following checkpatch.pl error: ERROR: trailing whitespace Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-01-01iio: accel: kxcjk-1013: Add a blank line after declarationsRoberta Dobrescu
This patch fixes the following checkpatch.pl warning: WARNING: Missing a blank line after declarations Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26staging: iio: accel: sca3000_core.c: Remove unused functionRickard Strandqvist
Remove the function sca3000_check_status() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: imu: inv_mpu6050: ACPI enumerationSrinivas Pandruvada
Added changes so that the module can be enumerated via ACPI. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: trigger: Add a blank line after declarationsRoberta Dobrescu
This patch fixes the following checkpatch.pl warning: WARNING: Missing a blank line after declarations Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: mma9551: fix sparse warningVlad Dogaru
sparse warnings: (new ones prefixed by >>) >> drivers/iio/accel/mma9551.c:554:57: sparse: mixing different enum types drivers/iio/accel/mma9551.c:554:57: int enum mma9551_tilt_axis versus drivers/iio/accel/mma9551.c:554:57: int enum mma9551_gpio_pin >> drivers/iio/accel/mma9551.c:576:57: sparse: mixing different enum types drivers/iio/accel/mma9551.c:576:57: int enum mma9551_tilt_axis versus drivers/iio/accel/mma9551.c:576:57: int enum mma9551_gpio_pin Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Reviewed-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: core: Get rid of misleading commentKarol Wrona
This comment did not fit here. It explains why devm_kmalloc uses dr_alloc. Generally is not needed at all. Signed-off-by: Karol Wrona <k.wrona@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: kfifo: Add resource management devm_iio_kfifo_allocate/freeKarol Wrona
iio kfifo allocate/free gained their devm_ wrappers. Signed-off-by: Karol Wrona <k.wrona@samsung.com> Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: kfifo: Remove unused argument in iio_kfifo_allocateKarol Wrona
indio_dev was unused in function body plus some small style fix - add new lines after "if(sth) return sth" and before the last return statement. The argument was removed also in its client. Signed-off-by: Karol Wrona <k.wrona@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio:pressure:bmp280: cleanupHartmut Knaack
The calculations for temperature and pressure compensation were already slightly optimized in comparison to the datasheet. So, it makes sense to optimize even a bit more, making proper use of C operators: - variable t in bmp280_compensate_temp() can be eliminated by directly returning the result of the relevant equation. - make use of the += operator and eliminate an unnecessary parenthesis level in bmp280_compensate_press(). When the initialization of the ctrl_meas register fails, the error message will now mention the right register name. During probe, i2c_set_clientdata() is called, although it is not necessary. Drop it. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: frequency: Remove unnecessary braces around single statement blockRoberta Dobrescu
This patch fixes the following checkpatch.pl warning: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-26iio: frequency: Remove 'out of memory' messageRoberta Dobrescu
This patch fixes the following checkpatch.pl warning: WARNING: Possible unnecessary 'out of memory' message Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: imu: kmx61: kmx61_set_wake_up_odr() can be statickbuild test robot
drivers/iio/imu/kmx61.c:422:5: sparse: symbol 'kmx61_set_wake_up_odr' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: imu: kmx61: Add support for any motion triggerDaniel Baluta
We use WUFE (Wake Up from Sleep Engine) and BTSE (Back to Sleep Engine) to detect general motion input. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: imu: kmx61: Add support for data ready triggersDaniel Baluta
This creates a data ready trigger per IIO device. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: imu: kmx61: Add PM sleep supportDaniel Baluta
Per sensor state (ACTIVE/STANDBY) is saved in driver's private data (acc_stby/mag_stby) and restored when resume is called. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: imu: kmx61: Add PM runtime supportDaniel Baluta
By default both sensors are ACTIVE, in this way the driver will work even if CONFIG_PM_RUNTIME is not selected. Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: imu: kmx61: Add acpi supportDaniel Baluta
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: imu: Add support for Kionix KMX61 sensorDaniel Baluta
Minimal implementation for KMX61 6-axis accelerometer/magnetometer. It exports raw accel/magn readings together with scale and sampling frequency. This driver uses two IIO devices one for accelerometer and one for magnetometer. Datasheet will be available at: http://www.kionix.com/6-axis-accelerometer-magnetometer/kmx61 Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12Revert "iio: imu: Add support for Kionix KMX61 sensor"Jonathan Cameron
The two halves of this part can run largely independently. Hence a version 4 of this patch followed that reorganized things completely. This reverts commit d7d787d29148cde12958c2e3765ad3a55dc55eaf.
2014-12-12iio: add driver for Freescale MMA9551LVlad Dogaru
Add support for Freescale MMA9551L Intelligent Motion-Sensing Platform. The driver supports raw reads for acceleration and inclination, as well as configuring inclination rate-of-change events. The events can be used similarly to an Android sensor Tilt event. The specifications can be downloaded from: http://www.freescale.com/files/sensors/doc/ref_manual/MMA955xLSWRM.pdf Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: accel: kxcjk-1013: power off device if probe failsIrina Tirdea
When the device is initialized in probe, it is also powered on. If there is an error after the initialization, the device will remain powered on. Power off the device in case probe fails after device initialization. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Suggested-by: Daniel Baluta <daniel.baluta@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: accel: kxcjk-1013: error handling when set mode failsIrina Tirdea
If there is an error in set mode at runtime resume, reset the state of the runtime usage count. If there is an error in set mode at runtime suspend, make sure the framework retries to suspend the device. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: buffer: Drop get_length callbackLars-Peter Clausen
We already do have the length field in the struct iio_buffer which is expected to be in sync with the current size of the buffer. And currently all implementations of the get_length callback either return this field or a constant number. This patch removes the get_length callback and replaces all occurrences in the IIO core with directly accessing the length field of the buffer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: buffer: Make length attribute read only for buffers without set_lengthLars-Peter Clausen
If a buffer implementation does not implement the set_length() callback the length will be static and can not be changed by userspace. Mark the length attribute as a read only property in this case so userspace is aware of this rather than just silently accepting any length value. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: buffer: Allocate standard attributes in the coreLars-Peter Clausen
All buffers want at least the length and the enable attribute. Move the creation of those attributes to the core instead of having to do this in each individual buffer implementation. This allows us to get rid of some boiler-plate code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: buffer: Move iio_buffer_alloc_sysfs and iio_buffer_free_sysfsLars-Peter Clausen
The next patch will introduce new dependencies in iio_buffer_alloc_sysfs() to functions which are currently defined after iio_buffer_alloc_sysfs(). To avoid forward declarations move both iio_buffer_alloc_sysfs() and iio_buffer_free_sysfs() after those function. This is split into two patches one moving the functions and one adding the dependencies to make review of the actual changes easier. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: Remove get_bytes_per_datum() from iio_buffer_access_funcsLars-Peter Clausen
There haven't been any users of the get_bytes_per_datum() callback for a while. The core assumes that the number of bytes per datum can be calculated based on the enabled channels and the storage size of the channel and iio_compute_scan_bytes() is used to compute this number. So remove the callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: Move buffer registration to the coreLars-Peter Clausen
Originally device and buffer registration were kept as separate operations in IIO to allow to register two distinct sets of channels for buffered and non-buffered operations. This has since already been further restricted and the channel set registered for the buffer needs to be a subset of the channel set registered for the device. Additionally the possibility to not have a raw (or processed) attribute for a channel which was registered for the device was added a while ago. This means it is possible to not register any device level attributes for a channel even if it is registered for the device. Also if a channel's scan_index is set to -1 and the channel is registered for the buffer it is ignored. So in summary it means it is possible to register the same channel array for both the device and the buffer yet still end up with distinctive sets of channels for both of them. This makes the argument for having to have to manually register the channels for both the device and the buffer invalid. Considering that the vast majority of all drivers want to register the same set of channels for both the buffer and the device it makes sense to move the buffer registration into the core to avoid some boiler-plate code in the device driver setup path. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12staging:iio:dummy: Register same channels for device and bufferLars-Peter Clausen
In preparation for moving the buffer registration to the core make sure to register the same channel array for the device and the buffer. Currently the output voltage and the activity channels are not registered for the buffer, setting its scan index to -1 will make sure that it is skipped for the buffer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12staging:iio:sca3000: Register same channels for device and bufferLars-Peter Clausen
In preparation for moving the buffer registration to the core make sure to register the same channel array for the device and the buffer. Currently the temperature channel is not registered for the buffer, setting its scan index to -1 will make sure that it is skipped for the buffer. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: Unexport iio_scan_mask_set()Lars-Peter Clausen
Individual drivers should not be messing with the scan mask that contains the list of enabled channels. This is something that is supposed to be managed by the core. Now that the last few drivers that used it to configure a default scan mask have been updated to not do this anymore we can unexport the function. Note, this patch also requires moving a few functions around so they are all declared before the first internal user. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12staging:iio:sca3000: Don't enable channels by defaultLars-Peter Clausen
The convention for IIO devices is that all channels are disabled by default. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12staging:iio:ad5933: Don't enable channels by defaultLars-Peter Clausen
The convention for IIO devices is that all channels are disabled by default. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: inkern: add iio_write_channel_rawDmitry Eremin-Solenikov
Introduce API for easy in-kernel setting of DAC values. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-12-12iio: accel: kxcjk-1013: only set power state if CONFIG_PM is definedIrina Tirdea
When CONFIG_PM is not defined and the driver tries to power off the device, kxcjk1013_set_power_state will call pm_runtime_put_autosuspend, which is not implemented (wil return -ENOSYS). Only call pm_runtime calls to change power state when CONFIG_PM is defined. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-16 03:18:06 +0000