summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-02-23at86rf230: fix state change handling on errorAlexander Aring
This patch force always to set "is_tx_from_off", when calibration timeout was not occurred. In case of error handling the is_tx_from_off can be inside in an invalid state. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23at86rf230: fix race on error handlingAlexander Aring
The resource "ctx" can be still used by at86rf230_async_state_change, we need to free it at the complete handler of the async state change to avoid a use after free. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: Add new AR3012 ID 0489:e095Dmitry Tunin
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e095 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb This device requires ar3k/AthrBT_0x31010100.dfu and ar3k/ramps_0x31010100_40.dfu firmware files that are not in linux-firmware yet. BugLink: https://bugs.launchpad.net/bugs/1542944 Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-02-23Bluetooth: btbcm: Fix handling of firmware not foundPetri Gynther
If the call to request_firmware() fails in btbcm_setup_patchram(), the BCM chip will be operating with its default firmware. In this case, btbcm_setup_patchram() should not return immediately but instead should skip to btbcm_check_bdaddr() and quirk setup. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_bcm: Add BCM2E7C ACPI IDMika Westerberg
Recent macbooks (early 2015) with BCM43241 use this ACPI ID. Add it to the list of supported devices. Reported-by: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_bcm: Add new ACPI ID for bcm43241J.J. Meijer
This ACPI ID is used at least by HP for their Omni 10 5600eg tablet. Signed-off-by: J.J. Meijer <jjmeijer88@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: btusb: Add new AR3012 ID 13d3:3395Dmitry Tunin
T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3395 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1542564 Reported-and-tested-by: Christopher Simerly <kilikopela29@gmail.com> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-02-23Bluetooth: hci_intel: Fix a wrong comparisonAnton Protopopov
A return value of the intel_wait_booting() function compared with a constant ETIMEDOUT instead of -ETIMEDOUT. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: ath3k: Fixed a blank line after declaration issueBhumika Goyal
Fixed a coding style issue. Added a blank link after declaration. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23rocker: fix rocker_world_port_obj_vlan_add()Dan Carpenter
We were changing return values and accidentally made rocker_world_port_obj_vlan_add() into a no-op. Fixes: fccd84d44912 ('rocker: return -EOPNOTSUPP for undefined world ops') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Looks like a lot, but mostly driver fixes scattered all over as usual. Of note: 1) Add conditional sched in nf conntrack in cleanup to avoid NMI watchdogs. From Florian Westphal. 2) Fix deadlock in nfnetlink cttimeout, also from Floarian. 3) Fix handling of slaves in bonding ARP monitor validation, from Jay Vosburgh. 4) Callers of ip_cmsg_send() are responsible for freeing IP options, some were not doing so. Fix from Eric Dumazet. 5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT. 6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot. 7) bcm7xxx PHY driver bug fixes from Florian Fainelli. 8) Avoid unaligned accesses to protocol headers wrt. GRE, from Alexander Duyck. 9) SKB leaks and other problems in arc_emac driver, from Alexander Kochetkov. 10) tcp_v4_inbound_md5_hash() releases listener socket instead of request socket on error path, oops. Fix from Eric Dumazet. 11) Missing socket release in pppoe_rcv_core() that seems to have existed basically forever. From Guillaume Nault. 12) Missing slave_dev unregister in dsa_slave_create() error path, from Florian Fainelli. 13) crypto_alloc_hash() never returns NULL, fix return value check in __tcp_alloc_md5sig_pool. From Insu Yun. 14) Properly expire exception route entries in ipv4, from Xin Long. 15) Fix races in tcp/dccp listener socket dismantle, from Eric Dumazet. 16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not legal. These drivers modify the SKB on transmit. From Jiri Benc. 17) Fix regression in the initialziation of netdev->tx_queue_len. From Phil Sutter. 18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun. 19) SCTP port hash sizing does not properly ensure that table is a power of two in size. From Neil Horman. 20) Fix initializing of software copy of MAC address in fmvj18x_cs driver, from Ken Kawasaki" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits) bnx2x: Fix 84833 phy command handler bnx2x: Fix led setting for 84858 phy. bnx2x: Correct 84858 PHY fw version bnx2x: Fix 84833 RX CRC bnx2x: Fix link-forcing for KR2 net: ethernet: davicom: fix devicetree irq resource fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address Driver: Vmxnet3: Update Rx ring 2 max size net: netcp: rework the code for get/set sw_data in dma desc soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data net: ti: netcp: restore get/set_pad_info() functionality MAINTAINERS: Drop myself as xen netback maintainer sctp: Fix port hash table size computation can: ems_usb: Fix possible tx overflow Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb net: bcmgenet: Fix internal PHY link state af_unix: Don't use continue to re-execute unix_stream_read_generic loop unix_diag: fix incorrect sign extension in unix_lookup_by_ino bnxt_en: Failure to update PHY is not fatal condition. bnxt_en: Remove unnecessary call to update PHY settings. ...
2016-02-22Merge tag 'hwmon-for-linus-v4.5-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two fixes headed for stable: - Remove an unnecessary speed_index lookup for thermal hook in the gpio-fan driver. The unnecessary speed lookup can hog the system. - Handle negative conversion values correctly in the ads1015 driver" * tag 'hwmon-for-linus-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook hwmon: (ads1015) Handle negative conversion values correctly
2016-02-22Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "One ocrdma fix: - The new CQ API support was added to ocrdma, but they got the arming logic wrong, so without this, transfers eventually fail when they fail to arm the interrupt properly under load Two related fixes for mlx4: - When we added the 64bit extended counters support to the core IB code, they forgot to update the RoCE side of the mlx4 driver (the IB side they properly updated). I debated whether or not to include these patches as they could be considered feature enablement patches, but the existing code will blindy copy the 32bit counters, whether any counters were requested at all (a bug). These two patches make it (a) check to see that counters were requested and (b) copy the right counters (the 64bit support is new, the 32bit is not). For that reason I went ahead and took them" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx4: Add support for the port info class for RoCE ports IB/mlx4: Add support for extended counters over RoCE ports RDMA/ocrdma: Fix arm logic to align with new cq API
2016-02-22Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C for you: A fix for a RuntimePM regression with OMAP, a fix to enable TCO for Lewisburg platforms, and a typo fix while we are here" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Adding Intel Lewisburg support for iTCO i2c: uniphier: fix typos in error messages i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
2016-02-22netcp: use pointer to fix build failSudip Mukherjee
While building keystone_defconfig of arm we are getting build failure with the error: drivers/net/ethernet/ti/netcp_core.c:1846:31: error: invalid type argument of '->' (have 'struct tc_to_netdev') if (handle != TC_H_ROOT || tc->type != TC_SETUP_MQPRIO) ^ drivers/net/ethernet/ti/netcp_core.c:1851:35: error: invalid type argument of '->' (have 'struct tc_to_netdev') (dev->real_num_tx_queues < tc->tc)) ^ drivers/net/ethernet/ti/netcp_core.c:1855:8: error: invalid type argument of '->' (have 'struct tc_to_netdev') if (tc->tc) { ^ drivers/net/ethernet/ti/netcp_core.c:1856:28: error: invalid type argument of '->' (have 'struct tc_to_netdev') netdev_set_num_tc(dev, tc->tc); ^ drivers/net/ethernet/ti/netcp_core.c:1857:21: error: invalid type argument of '->' (have 'struct tc_to_netdev') for (i = 0; i < tc->tc; i++) ^ drivers/net/ethernet/ti/netcp_core.c: At top level: drivers/net/ethernet/ti/netcp_core.c:1879:2: warning: initialization from incompatible pointer type .ndo_setup_tc = netcp_setup_tc, ^ The callback of ndo_setup_tc should be: int (*ndo_setup_tc)(struct net_device *dev, u32 handle, __be16 protocol, struct tc_to_netdev *tc); But we missed marking the last argument as a pointer. Fixes: 16e5cc647173 ("net: rework setup_tc ndo op to consume general tc operand") CC: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21Merge tag 'linux-can-fixes-for-4.5-20160221' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-02-21 this is a pull reqeust of one patch for net/master. The patch is by Gerhard Uttenthaler and fixes a potential tx overflow in the ems_usb driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21bnx2x: Fix 84833 phy command handlerYuval Mintz
Current initialization sequence is lacking, causing some configurations to fail. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21bnx2x: Fix led setting for 84858 phy.Yuval Mintz
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21bnx2x: Correct 84858 PHY fw versionYuval Mintz
The phy's firmware version isn't being parsed properly as it's currently parsed like the rest of the 848xx phys. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21bnx2x: Fix 84833 RX CRCYuval Mintz
There's a problem in current 84833 phy configuration - in case 1Gb link is configured and jumbo-sized packets are being used, device will experience RX crc errors. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21bnx2x: Fix link-forcing for KR2Yuval Mintz
Currently, when link is using KR2 it cannot be forced to any speed other than 20g. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.om> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21qed,qede: Bump driver versions to 8.7.0.0Yuval Mintz
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21qed: Introduce DMA_REGPAIR_LEYuval Mintz
FW hsi contains regpairs, mostly for 64-bit address representations. Since same paradigm is applied each time a regpair is filled, this introduces a new utility macro for setting such regpairs. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21qed: Change metadata needed for SPQ entriesYuval Mintz
Each configuration element send via ramrod requires a Slow Path Queue entry. This slightly changes the way such an entry is configured, but contains mostly semantic changes [where more parameters are gathered in a sub-struct instead of being directly passed]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21qed: Handle possible race in SB configYuval Mintz
Due to HW design, some of the memories are wide-bus and access to those needs to be sequentialized on a per-HW-block level; Read/write to a given HW-block might break other read/write to wide-bus memory done at ~same time. Status blocks initialization in CAU is done into such a wide-bus memory. This moves the initialization into using DMAE which is guaranteed to be safe to use on such memories. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21qed: Turn most GFP_ATOMIC into GFP_KERNELYuval Mintz
Initial driver submission used GFP_ATOMIC almost inclusively when allocating memory. We now remedy this point, using GFP_KERNEL where it's possible. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21ipvlan: misc changesMahesh Bandewar
1. scope correction for few functions that are used in single file. 2. Adjust variables that are used in fast-path to fit into single cacheline 3. Update rcv_frame() to skip shared check for frames coming over wire Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21ipvlan: mode is u16Mahesh Bandewar
The mode argument was erronusly defined as u32 but it has always been u16. Also use ipvlan_set_mode() helper to set the mode instead of assigning directly. This should avoid future erronus assignments / updates. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21ipvlan: scrub skb before routing in L3 mode.Mahesh Bandewar
Scrub skb before hitting the iptable hooks to ensure packets hit these hooks. Set the xnet param only when the packet is crossing the ns boundry so if the IPvlan slave and master belong to the same ns, the param will be set to false. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21net: ethernet: davicom: fix devicetree irq resourceRobert Jarzmik
The dm9000 driver doesn't work in at least one device-tree configuration, spitting an error message on irq resource : [    1.062495] dm9000 8000000.ethernet: insufficient resources [    1.068439] dm9000 8000000.ethernet: not found (-2). [    1.073451] dm9000: probe of 8000000.ethernet failed with error -2 The reason behind is that the interrupt might be provided by a gpio controller, not probed when dm9000 is probed, and needing the probe deferral mechanism to apply. Currently, the interrupt is directly taken from resources. This patch changes this to use the more generic platform_get_irq(), which handles the deferral. Moreover, since commit Fixes: 7085a7401ba5 ("drivers: platform: parse IRQ flags from resources"), the interrupt trigger flags are honored in platform_get_irq(), so remove the needless code in dm9000. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marcel Ziswiler <marcel@ziswiler.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Sergei Ianovich <ynvich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21Merge tag 'linux-can-next-for-4.6-20160220' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2016-02-20 this is a pull request of 9 patch for net-next/master. The first 3 patches are from Damien Riegel, they add support for Technologic Systems IP core to tje sja100 driver. The next patches 6 by Marek Vasut (including one my me) first clean sort the CAN driver's Kconfig and Makefiles and then add support for the IFI CANFD IP core. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC ↵Ken Kawasaki
address fix incorrect indexing of dev->dev_addr[] when copying the MAC address of FMV-J182 at buf[5]. Signed-off-by: Ken Kawasaki <ken_kawasaki@nifty.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21VXLAN: Support outer IPv4 Tx checksums by defaultAlexander Duyck
This change makes it so that if UDP CSUM is not specified we will default to enabling it. The main motivation behind this is the fact that with the use of outer checksum we can greatly improve the performance for VXLAN tunnels on devices that don't know how to parse tunnel headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21GENEVE: Support outer IPv4 Tx checksums by defaultAlexander Duyck
This change makes it so that if UDP CSUM is not specified we will default to enabling it. The main motivation behind this is the fact that with the use of outer checksum we can greatly improve the performance for GENEVE tunnels on hardware that doesn't know how to parse them. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21Driver: Vmxnet3: Update Rx ring 2 max sizeShrikrishna Khare
Device emulation supports max size of 4096. Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21net: netcp: rework the code for get/set sw_data in dma descKaricheri, Muralidharan
SW data field in descriptor can be used by software to hold private data for the driver. As there are 4 words available for this purpose, use separate macros to place it or retrieve the same to/from descriptors. Also do type cast of data types accordingly. Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_dataKaricheri, Muralidharan
Rename the pad to sw_data as per description of this field in the hardware spec(refer sprugr9 from www.ti.com). Latest version of the document is at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1 Host Packet Descriptor describes this field. Define and use a constant for the size of sw_data field similar to other fields in the struct for desc and document the sw_data field in the header. As the sw_data is not touched by hw, it's type can be changed to u32. Rename the helpers to match with the updated dma desc field sw_data. Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21net: ti: netcp: restore get/set_pad_info() functionalityKaricheri, Muralidharan
The commit 899077791403 ("netcp: try to reduce type confusion in descriptors") introduces a regression in Kernel 4.5-rc1 and it breaks get/set_pad_info() functionality. The TI NETCP driver uses pad0 and pad1 fields of knav_dma_desc to store DMA/MEM buffer pointer and buffer size respectively. And in both cases for Keystone 2 the pointer type size is 32 bit regardless of LAPE enabled or not, because CONFIG_ARCH_DMA_ADDR_T_64BIT originally is not expected to be defined. Unfortunately, above commit changed buffer's pointers save/restore code (get/set_pad_info()) and added intermediate conversation to u64 which works incorrectly on 32bit Keystone 2 and causes TI NETCP driver crash in RX/TX path due to "Unable to handle kernel NULL pointer" exception. This issue was reported and discussed in [1]. Hence, fix it by partially reverting above commit and restoring get/set_pad_info() functionality as it was before. [1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95361.html Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: David Laight <David.Laight@ACULAB.COM> CC: Arnd Bergmann <arnd@arndb.de> Reported-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21can: ems_usb: Fix possible tx overflowGerhard Uttenthaler
This patch fixes the problem that more CAN messages could be sent to the interface as could be send on the CAN bus. This was more likely for slow baud rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under heavy TX load this produced another bulk transfer without checking the free_slots variable and hence caused the overflow in the interface. Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-02-20Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This is unusually large, partly due to the EFI fixes that prevent accidental deletion of EFI variables through efivarfs that may brick machines. These fixes are somewhat involved to maintain compatibility with existing install methods and other usage modes, while trying to turn off the 'rm -rf' bricking vector. Other fixes are for large page ioremap()s and for non-temporal user-memcpy()s" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix vmalloc_fault() to handle large pages properly hpet: Drop stale URLs x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache() x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable lib/ucs2_string: Correct ucs2 -> utf8 conversion efi: Add pstore variables to the deletion whitelist efi: Make efivarfs entries immutable by default efi: Make our variable validation list include the guid efi: Do variable name validation tests in utf8 efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version lib/ucs2_string: Add ucs2 -> utf8 helper functions
2016-02-20Merge tag 'dmaengine-fix-4.5-rc5' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A few fixes for drivers, nothing major here. Fixes are: iotdma fix to restart channels, new ID for wildcat PCH, residue fix for edma, disable irq for non-cyclic in dw" * tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer dmaengine: edma: fix residue race for cyclic dmaengine: dw: pci: add ID for WildcatPoint PCH dmaengine: IOATDMA: fix timer code that continues to restart channels during idle
2016-02-20Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: "An assortment of vendor specific clk drivers fixes, most notably fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this cycle. There's also the random smattering of sparse/checker fixes, a build "fix" to get the Tango clk driver to compile because the Kconfig symbol was renamed after the fact, and a clk gpio fix for a patch mismerge" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits) clk: gpio: Really allow an optional clock= DT property Revert "clk: qcom: Specify LE device endianness" clk: versatile: mask VCO bits before writing clk: tegra: super: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warnings for functions not declared as static clk: tegra: Fix sparse warning for pll_m clk: tegra: Use definition for pll_u override bit clk: tegra: Fix warning caused by pll_u failing to lock clk: tegra: Fix clock sources for Tegra210 EMC clk: tegra: Add the APB2APE audio clock on Tegra210 clk: tegra: Add missing of_node_put() clk: tegra: Fix PLLE SS coefficients clk: tegra: Fix typos around clearing PLLE bits during enable clk: tegra: Do not disable PLLE when under hardware control clk: tegra: Fix pllx dyn step calculation clk: tegra: pll: Fix potential sleeping-while-atomic clk: tegra: Fix the misnaming of nvenc from msenc clk: tegra: Fix naming of MISC registers clk: tango4: rename ARCH_TANGOX to ARCH_TANGO clk: scpi: Fix checking return value of platform_device_register_simple() ...
2016-02-20Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull more drm fixes from Dave Airlie: "Some more fixes trickled in: A bunch of VC4 ones since it's a pretty new driver not much chance of regressions, and it fixes GPU resets. Also one atomic fix, one set of fixes for a common bug in TTM cleanup, and one i915 hotplug fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: use post-decrement in error handling drm/atomic: Allow for holes in connector state, v2. drm/i915: Fix hpd live status bits for g4x drm/vc4: Use runtime PM to power cycle the device when the GPU hangs. drm/vc4: Enable runtime PM. drm/vc4: Fix spurious GPU resets due to BO reuse. drm/vc4: Drop error message on seqno wait timeouts. drm/vc4: Fix -ERESTARTSYS error return from BO waits. drm/vc4: Return an ERR_PTR from BO creation instead of NULL. drm/vc4: Fix the clear color for the first tile rendered. drm/vc4: Validate that WAIT_BO padding is cleared. drm/radeon: use post-decrement in error handling drm/amdgpu: use post-decrement in error handling
2016-02-20can: ifi: Add IFI CANFD IP supportMarek Vasut
The patch adds support for IFI CAN/FD controller [1]. This driver currently supports sending and receiving both standard CAN and new CAN/FD frames. Both ISO and BOSCH variant of CAN/FD is supported. [1] http://www.ifi-pld.de/IP/CANFD/canfd.html Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-02-20can: Makefile: Sort the MakefileMarek Vasut
Just sort the drivers in the Makefile, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-02-20can: Kconfig: sort drivers alphabeticallyMarc Kleine-Budde
Sort the drivers that are directly listed in the Kconfig alphabetically, no functional change. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-02-20can: Kconfig: Sort the Kconfig includesMarek Vasut
Sort the Kconfig includes, no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-02-20can: sja1000: of: add compatibility with Technologic Systems versionDamien Riegel
Technologic Systems provides an IP compatible with the SJA1000, instantiated in an FPGA. Because of some bus widths issue, access to registers is made through a "window" that works like this: base + 0x0: address to read/write base + 0x2: 8-bit register value This commit adds a new compatible device, "technologic,sja1000", with read and write functions using the window mechanism. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-02-20can: sja1000: of: add per-compatible init hookDamien Riegel
This commit adds the capability to allocate and init private data embedded in the sja1000_priv structure on a per-compatible basis. The device node is passed as a parameter of the init callback to allow parsing of custom device tree properties. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-04-29 08:51:58 +0000