summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-03-27Merge tag 'arm-soc-fixes-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM DT and driver fixes from Arnd Bergmann: "For the devicetree files, there are a total of 20 patches, almost entirely for 32-bit machines: - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues, both for correctness and for style that are addressed in separate patches. This causes most of the changed lines of the DT updates this time. - More Allwinner updates fixing the identification of the security system on sun8i/A33, a recent regression of the A83t ethernet, and a few board specific issues on the TBS-A711 macine. - Several bug fixes for OMAP dts files, most notably fixing the timings for the NAND flash on the Nokia N900 that regressed a while ago after the move to configuring them from DT. Some other OMAPs now set the correct dma limits on the L3 bus, and a regression fix addresses lost Ethernet on dm814x - One incorrect setting in the newly added Raspberry Pi Zero W that may cause issues with the SD card controller. - A missing property on the bcm2835 firmware node caused incorrect DMA settings. - An old bug on the oxnas platform causing spurious interrupts is finally addressed. - A regression on the Exynos Midas board broke the OLED panel power supply. - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this is now set to the values from the datasheet. - Some 64-bit machines use a deprecated string to identify the PSCI firmware. There are also several small code fixes addressing mostly serious issues: - Fix the sunxi rsb bus access to no longer return incorrect data when mixing 8 and 16 bit I/O. - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing quirk in the ti-sysc driver - Fix a NULL pointer access from a race in the fsl dpio driver - Fix a v5.5 regression in the exynos-chipid driver that caused an invalid error code probing the device on non-exynos platforms - Fix an out-of-bounds access in the AMD TEE driver" * tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) soc: samsung: chipid: Fix return value on non-Exynos platforms arm64: dts: Fix leftover entry-methods for PSCI ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards ARM: dts: oxnas: Fix clear-mask property ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: bcm2835-rpi-zero-w: Add missing pinctrl name ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage soc: fsl: dpio: register dpio irq handlers after dpio create tee: amdtee: out of bounds read in find_session() ARM: dts: N900: fix onenand timings bus: ti-sysc: Fix quirk flags for lcdc on am335x ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode ...
2020-03-27Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes. Mostly they're around the i.MX drivers fixing the parents of a few clks and making KASAN happy with how the message passing code works. Besides that we have a TI driver fix for the RTC parent and a fix for the basic gate type registration functions introduced this release where they didn't actually pass the arguments in the right places to the multiplexer function down below" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: imx: Align imx sc clock parent msg structs to 4 clk: imx: Align imx sc clock msg structs to 4 clk: Pass correct arguments to __clk_hw_register_gate() clk: ti: am43xx: Fix clock parent for RTC clock clk: imx8mp: Correct the enet_qos parent clock clk: imx8mp: Correct IMX8MP_CLK_HDMI_AXI clock parent
2020-03-27Merge tag 'drm-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty quiet: some minor sg mapping fixes for 3 drivers, and a single oops fix for the scheduler. I'm hoping nobody tries to send me a fixes pull today but I'll keep an eye out of the weekend. radeon/amdgpu/dma-buf: - sg list fixes scheduler: - oops fix" * tag 'drm-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drm: drm/scheduler: fix rare NULL ptr race drm/radeon: fix scatter-gather mapping with user pages drm/amdgpu: fix scatter-gather mapping with user pages drm/prime: use dma length macro when mapping sg
2020-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix to generate proper timestamps on key autorepeat events that were broken recently - a fix for Synaptics driver to only activate reduced reporting mode when explicitly requested - a new keycode for "selective screenshot" function - other assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: fix stale timestamp on key autorepeat events Input: move the new KEY_SELECTIVE_SCREENSHOT keycode Input: avoid BIT() macro usage in the serio.h UAPI header Input: synaptics-rmi4 - set reduced reporting mode only when requested Input: synaptics - enable RMI on HP Envy 13-ad105ng Input: allocate keycode for "Selective Screenshot" key Input: tm2-touchkey - add support for Coreriver TC360 variant dt-bindings: input: add Coreriver TC360 binding dt-bindings: vendor-prefixes: Add Coreriver vendor prefix Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()
2020-03-27Merge tag 'amd-drm-fixes-5.6-2020-03-26' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-26: Scheduler: - Fix a race condition that could result in a segfault Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200326144538.3937-1-alexander.deucher@amd.com
2020-03-27Merge tag 'drm-misc-fixes-2020-03-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.6: - SG fixes for prime, radeon and amdgpu. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ef10e822-76dd-125d-ec1f-9a78c5f76bc3@linux.intel.com
2020-03-26Input: fix stale timestamp on key autorepeat eventsDmitry Torokhov
We need to refresh timestamp when emitting key autorepeat events, otherwise they will carry timestamp of the original key press event. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206929 Fixes: 3b51c44bd693 ("Input: allow drivers specify timestamp for input events") Cc: stable@vger.kernel.org Reported-by: teika kazura <teika@gmx.com> Tested-by: teika kazura <teika@gmx.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "A small set of late-rc patches, mostly fixes for various crashers, some syzkaller fixes and a mlx5 HW limitation: - Several MAINTAINERS updates - Memory leak regression in ODP - Several fixes for syzkaller related crashes. Google recently taught syzkaller to create the software RDMA devices - Crash fixes for HFI1 - Several fixes for mlx5 crashes - Prevent unprivileged access to an unsafe mlx5 HW resource" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Block delay drop to unprivileged users RDMA/mlx5: Fix access to wrong pointer while performing flush due to error RDMA/core: Ensure security pkey modify is not lost MAINTAINERS: Clean RXE section and add Zhu as RXE maintainer IB/hfi1: Ensure pq is not left on waitlist IB/rdmavt: Free kernel completion queue when done RDMA/mad: Do not crash if the rdma device does not have a umad interface RDMA/core: Fix missing error check on dev_set_name() RDMA/nl: Do not permit empty devices names during RDMA_NLDEV_CMD_NEWLINK/SET RDMA/mlx5: Fix the number of hwcounters of a dynamic counter MAINTAINERS: Update maintainers for HISILICON ROCE DRIVER RDMA/odp: Fix leaking the tgid for implicit ODP
2020-03-26drm/scheduler: fix rare NULL ptr raceYintian Tao
There is one one corner case at dma_fence_signal_locked which will raise the NULL pointer problem just like below. ->dma_fence_signal ->dma_fence_signal_locked ->test_and_set_bit here trigger dma_fence_release happen due to the zero of fence refcount. ->dma_fence_put ->dma_fence_release ->drm_sched_fence_release_scheduled ->call_rcu here make the union fled “cb_list” at finished fence to NULL because struct rcu_head contains two pointer which is same as struct list_head cb_list Therefore, to hold the reference of finished fence at drm_sched_process_job to prevent the null pointer during finished fence dma_fence_signal [ 732.912867] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 732.914815] #PF: supervisor write access in kernel mode [ 732.915731] #PF: error_code(0x0002) - not-present page [ 732.916621] PGD 0 P4D 0 [ 732.917072] Oops: 0002 [#1] SMP PTI [ 732.917682] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G OE 5.4.0-rc7 #1 [ 732.918980] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 732.920906] RIP: 0010:dma_fence_signal_locked+0x3e/0x100 [ 732.938569] Call Trace: [ 732.939003] <IRQ> [ 732.939364] dma_fence_signal+0x29/0x50 [ 732.940036] drm_sched_fence_finished+0x12/0x20 [gpu_sched] [ 732.940996] drm_sched_process_job+0x34/0xa0 [gpu_sched] [ 732.941910] dma_fence_signal_locked+0x85/0x100 [ 732.942692] dma_fence_signal+0x29/0x50 [ 732.943457] amdgpu_fence_process+0x99/0x120 [amdgpu] [ 732.944393] sdma_v4_0_process_trap_irq+0x81/0xa0 [amdgpu] v2: hold the finished fence at drm_sched_process_job instead of amdgpu_fence_process v3: resume the blank line Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-25clk: imx: Align imx sc clock parent msg structs to 4Leonard Crestez
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 666aed2d13ee ("clk: imx: scu: add set parent support") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-25clk: imx: Align imx sc clock msg structs to 4Leonard Crestez
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: fe37b4820417 ("clk: imx: add scu clock common part") Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix deadlock in bpf_send_signal() from Yonghong Song. 2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan. 3) Add missing locking in iwlwifi mvm code, from Avraham Stern. 4) Fix MSG_WAITALL handling in rxrpc, from David Howells. 5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong Wang. 6) Fix producer race condition in AF_PACKET, from Willem de Bruijn. 7) cls_route removes the wrong filter during change operations, from Cong Wang. 8) Reject unrecognized request flags in ethtool netlink code, from Michal Kubecek. 9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from Doug Berger. 10) Don't leak ct zone template in act_ct during replace, from Paul Blakey. 11) Fix flushing of offloaded netfilter flowtable flows, also from Paul Blakey. 12) Fix throughput drop during tx backpressure in cxgb4, from Rahul Lakkireddy. 13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric Dumazet. 14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well, also from Eric Dumazet. 15) Restrict macsec to ethernet devices, from Willem de Bruijn. 16) Fix reference leak in some ethtool *_SET handlers, from Michal Kubecek. 17) Fix accidental disabling of MSI for some r8169 chips, from Heiner Kallweit. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits) net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build net: ena: Add PCI shutdown handler to allow safe kexec selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED selftests/net: add missing tests to Makefile r8169: re-enable MSI on RTL8168c net: phy: mdio-bcm-unimac: Fix clock handling cxgb4/ptp: pass the sign of offset delta in FW CMD net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop net: cbs: Fix software cbs to consider packet sending time net/mlx5e: Do not recover from a non-fatal syndrome net/mlx5e: Fix ICOSQ recovery flow with Striding RQ net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset net/mlx5e: Enhance ICOSQ WQE info fields net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure selftests: netfilter: add nfqueue test case netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress netfilter: nft_fwd_netdev: validate family and chain type netfilter: nft_set_rbtree: Detect partial overlaps on insertion netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start() netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion ...
2020-03-25Merge tag 'gpio-v5.6-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - One core quirk by myself to fix the .irq_disable() semantics when the gpiolib core takes over this callback. - The rest is an elaborate series of four patches fixing Intel laptop ACPI wakeup quirks. * tag 'gpio-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk gpiolib: Fix irq_disable() semantics
2020-03-25Merge tag 'wireless-drivers-2020-03-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Fourth, and last, set of fixes for v5.6. Just two important fixes to iwlwifi regressions. iwlwifi * fix GEO_TX_POWER_LIMIT command on certain devices which caused firmware to crash during initialisation * add back device ids for three devices which were accidentally removed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} buildPablo Neira Ayuso
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: noreply@ellerman.id.au Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25net: ena: Add PCI shutdown handler to allow safe kexecGuilherme G. Piccoli
Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by: Gavin Shan <gshan@redhat.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25drm/radeon: fix scatter-gather mapping with user pagesShane Francis
Calls to dma_map_sg may return less segments / entries than requested if they fall on page bounderies. The old implementation did not support this use case. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <bigbeeshane@gmail.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-4-bigbeeshane@gmail.com Cc: stable@vger.kernel.org
2020-03-25drm/amdgpu: fix scatter-gather mapping with user pagesShane Francis
Calls to dma_map_sg may return less segments / entries than requested if they fall on page bounderies. The old implementation did not support this use case. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <bigbeeshane@gmail.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-3-bigbeeshane@gmail.com Cc: stable@vger.kernel.org
2020-03-25drm/prime: use dma length macro when mapping sgShane Francis
As dma_map_sg can reorganize scatter-gather lists in a way that can cause some later segments to be empty we should always use the sg_dma_len macro to fetch the actual length. This could now be 0 and not need to be mapped to a page or address array Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <bigbeeshane@gmail.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325090741.21957-2-bigbeeshane@gmail.com Cc: stable@vger.kernel.org
2020-03-25soc: samsung: chipid: Fix return value on non-Exynos platformsMarek Szyprowski
Correct the probe return value to -ENODEV on non-Exynos platforms. Link: https://lore.kernel.org/r/20200316175652.5604-4-krzk@kernel.org Fixes: 02fb29882d5c ("soc: samsung: chipid: Drop "syscon" compatible requirement") Cc: <stable@vger.kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'tee-amdtee-fix2-for-5.6' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes tee: amdtee: out of bounds read in find_session() * tag 'tee-amdtee-fix2-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: out of bounds read in find_session() Link: https://lore.kernel.org/r/20200320063446.GA9892@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'omap-for-v5.6/fixes-rc6-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/pull-1584575254-461940@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25RDMA/mlx5: Block delay drop to unprivileged usersMaor Gottlieb
It has been discovered that this feature can globally block the RX port, so it should be allowed for highly privileged users only. Fixes: 03404e8ae652("IB/mlx5: Add support to dropless RQ") Link: https://lore.kernel.org/r/20200322124906.1173790-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-25Merge tag 'sunxi-fixes-for-5.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 * tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage ARM: dts: sun8i: a83t: Fix incorrect clk and reset macros for EMAC device Link: https://lore.kernel.org/r/20200313055233.GA19649@wens.csie.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'soc-fsl-fix-v5.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes NXP/FSL soc driver fixes for v5.6 DPAA2 DPIO - Fix a kernel hang caused by irq requested before creating dpio * tag 'soc-fsl-fix-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpio: register dpio irq handlers after dpio create Link: https://lore.kernel.org/r/20200312202525.16708-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-24Merge tag 'mlx5-fixes-2020-03-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-24 This series introduces some fixes to mlx5 driver. From Aya, Fixes to the RX error recovery flows From Leon, Fix IB capability mask Please pull and let me know if there is any problem. For -stable v5.5 ('net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure') For -stable v5.4 ('net/mlx5e: Fix ICOSQ recovery flow with Striding RQ') ('net/mlx5e: Do not recover from a non-fatal syndrome') ('net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset') ('net/mlx5e: Enhance ICOSQ WQE info fields') The above patch ('net/mlx5e: Enhance ICOSQ WQE info fields') will fail to apply cleanly on v5.4 due to a trivial contextual conflict, but it is an important fix, do I need to do something about it or just assume Greg will know how to handle this ? ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24r8169: re-enable MSI on RTL8168cHeiner Kallweit
The original change fixed an issue on RTL8168b by mimicking the vendor driver behavior to disable MSI on chip versions before RTL8168d. This however now caused an issue on a system with RTL8168c, see [0]. Therefore leave MSI disabled on RTL8168b, but re-enable it on RTL8168c. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1792839 Fixes: 003bd5b4a7b4 ("r8169: don't use MSI before RTL8168d") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24net: phy: mdio-bcm-unimac: Fix clock handlingAndre Przywara
The DT binding for this PHY describes an *optional* clock property. Due to a bug in the error handling logic, we are actually ignoring this clock *all* of the time so far. Fix this by using devm_clk_get_optional() to handle this clock properly. Fixes: b78ac6ecd1b6b ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24cxgb4/ptp: pass the sign of offset delta in FW CMDRaju Rangoju
cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta in FW_PTP_CMD. Fix it by passing correct sign. Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-24RDMA/mlx5: Fix access to wrong pointer while performing flush due to errorLeon Romanovsky
The main difference between send and receive SW completions is related to separate treatment of WQ queue. For receive completions, the initial index to be flushed is stored in "tail", while for send completions, it is in deleted "last_poll". CPU: 54 PID: 53405 Comm: kworker/u161:0 Kdump: loaded Tainted: G OE --------- -t - 4.18.0-147.el8.ppc64le #1 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] NIP: c000003c7c00a000 LR: c00800000e586af4 CTR: c000003c7c00a000 REGS: c0000036cc9db940 TRAP: 0400 Tainted: G OE --------- -t - (4.18.0-147.el8.ppc64le) MSR: 9000000010009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24004488 XER: 20040000 CFAR: c00800000e586af0 IRQMASK: 0 GPR00: c00800000e586ab4 c0000036cc9dbbc0 c00800000e5f1a00 c0000037d8433800 GPR04: c000003895a26800 c0000037293f2000 0000000000000201 0000000000000011 GPR08: c000003895a26c80 c000003c7c00a000 0000000000000000 c00800000ed30438 GPR12: c000003c7c00a000 c000003fff684b80 c00000000017c388 c00000396ec4be40 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c00000000151e498 0000000000000010 c000003895a26848 0000000000000010 GPR24: 0000000000000010 0000000000010000 c000003895a26800 0000000000000000 GPR28: 0000000000000010 c0000037d8433800 c000003895a26c80 c000003895a26800 NIP [c000003c7c00a000] 0xc000003c7c00a000 LR [c00800000e586af4] __ib_process_cq+0xec/0x1b0 [ib_core] Call Trace: [c0000036cc9dbbc0] [c00800000e586ab4] __ib_process_cq+0xac/0x1b0 [ib_core] (unreliable) [c0000036cc9dbc40] [c00800000e586c88] ib_cq_poll_work+0x40/0xb0 [ib_core] [c0000036cc9dbc70] [c000000000171f44] process_one_work+0x2f4/0x5c0 [c0000036cc9dbd10] [c000000000172a0c] worker_thread+0xcc/0x760 [c0000036cc9dbdc0] [c00000000017c52c] kthread+0x1ac/0x1c0 [c0000036cc9dbe30] [c00000000000b75c] ret_from_kernel_thread+0x5c/0x80 Fixes: 8e3b68830186 ("RDMA/mlx5: Delete unreachable handle_atomic code by simplifying SW completion") Link: https://lore.kernel.org/r/20200318091640.44069-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-24RDMA/core: Ensure security pkey modify is not lostMike Marciniszyn
The following modify sequence (loosely based on ipoib) will lose a pkey modifcation: - Modify (pkey index, port) - Modify (new pkey index, NO port) After the first modify, the qp_pps list will have saved the pkey and the unit on the main list. During the second modify, get_new_pps() will fetch the port from qp_pps and read the new pkey index from qp_attr->pkey_index. The state will still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state, the new values will never replace the one in the qp pps list, losing the new pkey. This happens because the following if statements will never correct the state because the first term will be false. If the code had been executed, it would incorrectly overwrite valid values. if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT)) new_pps->main.state = IB_PORT_PKEY_VALID; if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) { new_pps->main.port_num = qp_pps->main.port_num; new_pps->main.pkey_index = qp_pps->main.pkey_index; if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID) new_pps->main.state = IB_PORT_PKEY_VALID; } Fix by joining the two if statements with an or test to see if qp_pps is non-NULL and in the correct state. Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list") Link: https://lore.kernel.org/r/20200313124704.14982.55907.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-24Input: synaptics-rmi4 - set reduced reporting mode only when requestedAndrew Duggan
The previous patch "c5ccf2ad3d33 (Input: synaptics-rmi4 - switch to reduced reporting mode)" enabled reduced reporting mode unintentionally on some devices, if the firmware was configured with default Delta X/Y threshold values. The result unintentionally degrade the performance of some touchpads. This patch checks to see that the driver is modifying the delta X/Y thresholds before modifying the reporting mode. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Fixes: c5ccf2ad3d33 ("Input: synaptics-rmi4 - switch to reduced reporting mode") Link: https://lore.kernel.org/r/20200312005549.29922-1-aduggan@synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24Input: synaptics - enable RMI on HP Envy 13-ad105ngYussuf Khalil
This laptop (and perhaps other variants of the same model) reports an SMBus-capable Synaptics touchpad. Everything (including suspend and resume) works fine when RMI is enabled via the kernel command line, so let's add it to the whitelist. Signed-off-by: Yussuf Khalil <dev@pp3345.net> Link: https://lore.kernel.org/r/20200307213508.267187-1-dev@pp3345.net Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-03-24net/mlx5e: Do not recover from a non-fatal syndromeAya Levin
For non-fatal syndromes like LOCAL_LENGTH_ERR, recovery shouldn't be triggered. In these scenarios, the RQ is not actually in ERR state. This misleads the recovery flow which assumes that the RQ is really in error state and no more completions arrive, causing crashes on bad page state. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-24net/mlx5e: Fix ICOSQ recovery flow with Striding RQAya Levin
In striding RQ mode, the buffers of an RX WQE are first prepared and posted to the HW using a UMR WQEs via the ICOSQ. We maintain the state of these in-progress WQEs in the RQ SW struct. In the flow of ICOSQ recovery, the corresponding RQ is not in error state, hence: - The buffers of the in-progress WQEs must be released and the RQ metadata should reflect it. - Existing RX WQEs in the RQ should not be affected. For this, wrap the dealloc of the in-progress WQEs in a function, and use it in the ICOSQ recovery flow instead of mlx5e_free_rx_descs(). Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-24net/mlx5e: Fix missing reset of SW metadata in Striding RQ resetAya Levin
When resetting the RQ (moving RQ state from RST to RDY), the driver resets the WQ's SW metadata. In striding RQ mode, we maintain a field that reflects the actual expected WQ head (including in progress WQEs posted to the ICOSQ). It was mistakenly not reset together with the WQ. Fix this here. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-24net/mlx5e: Enhance ICOSQ WQE info fieldsAya Levin
Add number of WQEBBs (WQE's Basic Block) to WQE info struct. Set the number of WQEBBs on WQE post, and increment the consumer counter (cc) on completion. In case of error completions, the cc was mistakenly not incremented, keeping a gap between cc and pc (producer counter). This failed the recovery flow on the ICOSQ from a CQE error which timed-out waiting for the cc and pc to meet. Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-24net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failureLeon Romanovsky
The cap_mask1 isn't protected by field_select and not listed among RW fields, but it is required to be written to properly initialize ports in IB virtualization mode. Link: https://lore.kernel.org/linux-rdma/88bab94d2fd72f3145835b4518bc63dda587add6.camel@redhat.com Fixes: ab118da4c10a ("net/mlx5: Don't write read-only fields in MODIFY_HCA_VPORT_CONTEXT command") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-03-24Merge tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Late fixes in dmaengine for v5.6: - move .device_release missing log warning to debug - couple of maintainer entries for HiSilicon and IADX drivers - off-by-one fix for idxd driver - documentation warning fixes - TI k3 dma error handling fix" * tag 'dmaengine-fix-5.6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: ti: k3-udma-glue: Fix an error handling path in 'k3_udma_glue_cfg_rx_flow()' MAINTAINERS: Add maintainer for HiSilicon DMA engine driver dmaengine: idxd: fix off by one on cdev dwq refcount MAINTAINERS: rectify the INTEL IADX DRIVER entry dmaengine: move .device_release missing log warning to debug level docs: dmaengine: provider.rst: get rid of some warnings
2020-03-24gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 modelHans de Goede
There are at least 3 models of the HP x2 10 models: Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO events on the external embedded-controller pin to avoid spurious wakeups on the HP x2 10 CHT + AXP288 model too. This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288 model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin on this model. This fixes spurious wakeups from suspend on this model. Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Reported-and-tested-by: Marc Lehmann <schmorp@schmorp.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200302111225.6641-4-hdegoede@redhat.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-23bnxt_en: Reset rings if ring reservation fails during open()Vasundhara Volam
If ring counts are not reset when ring reservation fails, bnxt_init_dflt_ring_mode() will not be called again to reinitialise IRQs when open() is called and results in system crash as napi will also be not initialised. This patch fixes it by resetting the ring counts. Fixes: 47558acd56a7 ("bnxt_en: Reserve rings at driver open if none was reserved at probe time.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23bnxt_en: Free context memory after disabling PCI in probe error path.Michael Chan
Other shutdown code paths will always disable PCI first to shutdown DMA before freeing context memory. Do the same sequence in the error path of probe to be safe and consistent. Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.Michael Chan
The current code ignores the return value from bnxt_hwrm_func_backing_store_cfg(), causing the driver to proceed in the init path even when this vital firmware call has failed. Fix it by propagating the error code to the caller. Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()Edwin Peer
The allocated ieee_ets structure goes out of scope without being freed, leaking memory. Appropriate result codes should be returned so that callers do not rely on invalid data passed by reference. Also cache the ETS config retrieved from the device so that it doesn't need to be freed. The balance of the code was clearly written with the intent of having the results of querying the hardware cached in the device structure. The commensurate store was evidently missed though. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.Michael Chan
There is an indexing bug in determining these ethtool priority counters. Instead of using the queue ID to index, we need to normalize by modulo 10 to get the index. This index is then used to obtain the proper CoS queue counter. Rename bp->pri2cos to bp->pri2cos_idx to make this more clear. Fixes: e37fed790335 ("bnxt_en: Add ethtool -S priority counters.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23macsec: restrict to ethernet devicesWillem de Bruijn
Only attach macsec to ethernet devices. Syzbot was able to trigger a KMSAN warning in macsec_handle_frame by attaching to a phonet device. Macvlan has a similar check in macvlan_port_create. v1->v2 - fix commit message typo Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23net: qmi_wwan: add support for ASKEY WWHC050Pawel Dembicki
ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23NFC: fdp: Fix a signedness bug in fdp_nci_send_patch()Dan Carpenter
The nci_conn_max_data_pkt_payload_size() function sometimes returns -EPROTO so "max_size" needs to be signed for the error handling to work. We can make "payload_size" an int as well. Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23Merge tag 'mlx5-fixes-2020-03-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-05 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v5.4 ('net/mlx5: DR, Fix postsend actions write length') For -stable v5.5 ('net/mlx5e: kTLS, Fix TCP seq off-by-1 issue in TX resync flow') ('net/mlx5e: Fix endianness handling in pedit mask') ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-23IB/hfi1: Ensure pq is not left on waitlistMike Marciniszyn
The following warning can occur when a pq is left on the dmawait list and the pq is then freed: WARNING: CPU: 47 PID: 3546 at lib/list_debug.c:29 __list_add+0x65/0xc0 list_add corruption. next->prev should be prev (ffff939228da1880), but was ffff939cabb52230. (next=ffff939cabb52230). Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd ast ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev drm_panel_orientation_quirks i2c_i801 mei_me lpc_ich mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci libahci i2c_algo_bit dca libata ptp pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 47 PID: 3546 Comm: wrf.exe Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.41.1.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 Call Trace: [<ffffffff91f65ac0>] dump_stack+0x19/0x1b [<ffffffff91898b78>] __warn+0xd8/0x100 [<ffffffff91898bff>] warn_slowpath_fmt+0x5f/0x80 [<ffffffff91a1dabe>] ? ___slab_alloc+0x24e/0x4f0 [<ffffffff91b97025>] __list_add+0x65/0xc0 [<ffffffffc03926a5>] defer_packet_queue+0x145/0x1a0 [hfi1] [<ffffffffc0372987>] sdma_check_progress+0x67/0xa0 [hfi1] [<ffffffffc03779d2>] sdma_send_txlist+0x432/0x550 [hfi1] [<ffffffff91a20009>] ? kmem_cache_alloc+0x179/0x1f0 [<ffffffffc0392973>] ? user_sdma_send_pkts+0xc3/0x1990 [hfi1] [<ffffffffc0393e3a>] user_sdma_send_pkts+0x158a/0x1990 [hfi1] [<ffffffff918ab65e>] ? try_to_del_timer_sync+0x5e/0x90 [<ffffffff91a3fe1a>] ? __check_object_size+0x1ca/0x250 [<ffffffffc0395546>] hfi1_user_sdma_process_request+0xd66/0x1280 [hfi1] [<ffffffffc034e0da>] hfi1_aio_write+0xca/0x120 [hfi1] [<ffffffff91a4245b>] do_sync_readv_writev+0x7b/0xd0 [<ffffffff91a4409e>] do_readv_writev+0xce/0x260 [<ffffffff918df69f>] ? pick_next_task_fair+0x5f/0x1b0 [<ffffffff918db535>] ? sched_clock_cpu+0x85/0xc0 [<ffffffff91f6b16a>] ? __schedule+0x13a/0x860 [<ffffffff91a442c5>] vfs_writev+0x35/0x60 [<ffffffff91a4447f>] SyS_writev+0x7f/0x110 [<ffffffff91f78ddb>] system_call_fastpath+0x22/0x27 The issue happens when wait_event_interruptible_timeout() returns a value <= 0. In that case, the pq is left on the list. The code continues sending packets and potentially can complete the current request with the pq still on the dmawait list provided no descriptor shortage is seen. If the pq is torn down in that state, the sdma interrupt handler could find the now freed pq on the list with list corruption or memory corruption resulting. Fix by adding a flush routine to ensure that the pq is never on a list after processing a request. A follow-up patch series will address issues with seqlock surfaced in: https://lore.kernel.org/r/20200320003129.GP20941@ziepe.ca The seqlock use for sdma will then be converted to a spin lock since the list_empty() doesn't need the protection afforded by the sequence lock currently in use. Fixes: a0d406934a46 ("staging/rdma/hfi1: Add page lock limit check for SDMA requests") Link: https://lore.kernel.org/r/20200320200200.23203.37777.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>