summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-10mtd: spinand: Remove outdated commentMiquel Raynal
This comment is no longer true so drop it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201001102014.20100-7-miquel.raynal@bootlin.com
2020-12-10mtd: spinand: Fix OOB readMiquel Raynal
So far OOB have never been used in SPI-NAND, add the missing memcpy to make it work properly. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201001102014.20100-6-miquel.raynal@bootlin.com
2020-12-10mtd: spinand: Allow the case where there is no ECC engineMiquel Raynal
Even if this is not supposed to happen, there is no reason to fail the probe if it was explicitly requested to use no ECC engine at all (for instance, during development). This condition is met by just commenting out the error on the OOB free bytes count after the assignation of an ECC engine if none was provided (any other situation would error out much earlier anyway). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201001102014.20100-5-miquel.raynal@bootlin.com
2020-12-10mtd: spinand: Use the external ECC engine logicMiquel Raynal
Now that all the logic is available in the NAND core, let's use it from the SPI-NAND core. Right now there is no functional change as the default ECC engine for SPI-NANDs is set to 'on-die', but user can now use software correction if they want to by just setting the right properties in the DT. Also note that the OOB layout handling is removed from the SPI-NAND core as each ECC engine is supposed to handle it by it's own; users should not be aware of that. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201001102014.20100-4-miquel.raynal@bootlin.com
2020-12-10mtd: nand: Add helpers to manage ECC engines and configurationsMiquel Raynal
Add the logic in the NAND core to find the right ECC engine depending on the NAND chip requirements and the user desires. Right now, the choice may be made between (more will come): * software Hamming * software BCH * on-die (SPI-NAND devices only) Once the ECC engine has been found, the ECC engine must be configured. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201001102014.20100-2-miquel.raynal@bootlin.com
2020-12-10mtd: spinand: Fill a default ECC provider/algorithmMiquel Raynal
The SPI-NAND layer default is on-die ECC because until now it was the only one supported. New SPI-NAND chip flavors might use something else as ECC engine provider but this will always be the default if the user does not choose explicitly something else. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200930154109.3922-6-miquel.raynal@bootlin.com
2020-12-10mtd: nand: Let on-die ECC engines be retrieved from the NAND coreMiquel Raynal
Before making use of the ECC engines, we must retrieve them. Add the necessary boilerplate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200930154109.3922-5-miquel.raynal@bootlin.com
2020-12-10mtd: spinand: Instantiate a SPI-NAND on-die ECC engineMiquel Raynal
Make use of the existing functions taken from the SPI-NAND core to instantiate an on-die ECC engine specific to the SPI-NAND core. The next step will be to tweak the core to use this object instead of calling the helpers directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200930154109.3922-4-miquel.raynal@bootlin.com
2020-12-10mtd: spinand: Move ECC related definitions earlier in the driverMiquel Raynal
Prepare the creation of a SPI-NAND on-die ECC engine by gathering the ECC-related code earlier enough in the core to avoid the need for forward declarations. The next step is to actually create that engine by implementing the generic ECC interface. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200930154109.3922-3-miquel.raynal@bootlin.com
2020-12-10mtd: spinand: Fix typo in commentMiquel Raynal
One comment in the SPI-NAND core is not very clear, fix it to ease the understanding of what the block does. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200930154109.3922-2-miquel.raynal@bootlin.com
2020-12-10mtd: nand: Let software ECC engines be retrieved from the NAND coreMiquel Raynal
Before making use of the ECC engines, we must retrieve them. Add the boilerplate for the ones already available: software engines (Hamming and BCH). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-21-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Create the software Hamming engineMiquel Raynal
Let's continue introducing the generic ECC engine abstraction in the NAND subsystem by instantiating a second ECC engine: software Hamming. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-20-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Let the software Hamming ECC engine be unselectedMiquel Raynal
There is no reason to always embed the software Hamming ECC engine implementation. By default it is (with raw NAND), but we can let the user decide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-19-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Remove useless includesMiquel Raynal
Most of the includes are simply useless, drop them. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-18-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Stop using raw NAND structuresMiquel Raynal
This code is meant to be reused by the SPI-NAND core. Now that the driver has been cleaned and reorganized, use a generic ECC engine object to store the driver's data instead of accessing members of the nand_chip structure. This means adding proper init/cleanup helpers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-17-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Rename the exported functionsMiquel Raynal
Prefix by ecc_sw_hamming_ the functions which should be internal only but are exported for "raw" operations. Prefix by nand_ecc_sw_hamming_ the other functions which will be used in the context of the declaration of an Hamming proper ECC engine object. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-16-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Cleanup and style fixesMiquel Raynal
Various style fixes. There is not functional change. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-15-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Drop/fix the kernel docMiquel Raynal
Some functions should never have been exported (the ones prefixed by __*), in this case simply drop the documentation, we never want anybody to use this function from the outside. For the other functions, enhance the style. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-14-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Clarify the driver descriptionsMiquel Raynal
The include file pretends being the header for "ECC algorithm", while it is just the header for the Hamming implementation. Make this clear by rewording the sentence. Do the same with the module description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-13-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-hamming: Move Hamming code to the generic NAND layerMiquel Raynal
Hamming ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-12-miquel.raynal@bootlin.com
2020-12-10mtd: rawnand: Get rid of chip->ecc.privMiquel Raynal
nand_ecc_ctrl embeds a private pointer which only has a meaning in the sunxi driver. This structure will soon be deprecated, but as this field is actually not needed, let's just drop it. Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-11-miquel.raynal@bootlin.com
2020-12-10mtd: nand: ecc-bch: Create the software BCH engineMiquel Raynal
Let's continue introducing the generic ECC engine abstraction in the NAND subsystem by instantiating a first ECC engine: the software BCH one. While at it, make a very tidy ecc_sw_bch_init() function and move all the sanity checks and user input management in nand_ecc_sw_bch_init_ctx(). This second helper will be called from the raw RAND core. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-10-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Stop using raw NAND structuresMiquel Raynal
This code is meant to be reused by the SPI-NAND core. Now that the driver has been cleaned and reorganized, use a generic ECC engine object to store the driver's data instead of accessing members of the nand_chip structure. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-9-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Update the prototypes to be more genericMiquel Raynal
These functions must be usable by the main NAND core, so their names must be technology-agnostic as well as the parameters. Hence, we pass a generic nand_device instead of a raw nand_chip structure. As it seems that changing the raw NAND functions to always pass a generic NAND device is a lost of time, we prefer to create dedicated raw NAND wrappers that will be useful in the near future to do the translation. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-8-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Drop mtd_nand_has_bch()Miquel Raynal
Like for any other compilation option, use the IS_ENABLED() macro instead of hardcoding it. By droping this helper we can get rid of the BCH header in nandsim.c. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-7-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Stop exporting the private structureMiquel Raynal
The NAND BCH control structure has nothing to do outside of this driver, all users of the nand_bch_init/free() functions just save it to chip->ecc.priv so do it in this driver directly and return a regular error code instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-5-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Cleanup and style fixesMiquel Raynal
Fix function headers, capitals and reword a little bit the comments to make this driver more readable. There is not functional change. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-4-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Move BCH code to the generic NAND layerMiquel Raynal
BCH ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-3-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc: Add an I/O request tweaking mechanismMiquel Raynal
Currently, BCH and Hamming engine are sharing the same tweaking/restoring I/O mechanism: they need the I/O request to fully cover the main/OOB area. Let's make this code generic as sharing the code between two drivers is already a win. Maybe other ECC engine drivers will need it too. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-2-miquel.raynal@bootlin.com
2020-11-29Merge tag 'locking-urgent-2020-11-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two more places which invoke tracing from RCU disabled regions in the idle path. Similar to the entry path the low level idle functions have to be non-instrumentable" * tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: intel_idle: Fix intel_idle() vs tracing sched/idle: Fix arch_cpu_idle() vs tracing
2020-11-29Merge tag 'irq-urgent-2020-11-29' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two fixes for irqchip drivers: - Save and restore the GICV3 ITS state unconditionally on suspend/resume to handle firmware which fails to do so. - Use the correct index into the fwspec parameters to read the irq trigger type in the EXIU chip driver" * tag 'irq-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Unconditionally save/restore the ITS state on suspend irqchip/exiu: Fix the index of fwspec for IRQ type
2020-11-29Merge tag 'efi-urgent-for-v5.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Borislav Petkov: "More EFI fixes forwarded from Ard Biesheuvel: - revert efivarfs kmemleak fix again - it was a false positive - make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does not pull in other dependencies unnecessarily if CONFIG_EFI is not set - defer attempts to load SSDT overrides from EFI vars until after the efivar layer is up" * tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: EFI_EARLYCON should depend on EFI efivarfs: revert "fix memory leak in efivarfs_create()" efi/efivars: Set generic ops before loading SSDT
2020-11-28Merge tag 'usb-5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY driver fixes from Greg KH: "Here are a few small USB and PHY driver fixes for 5.10-rc6. They include: - small PHY driver fixes to resolve reported issues - USB quirks added for "broken" devices - typec fixes for reported problems - USB gadget fixes for small issues Full details are in the shortlog, nothing major in here and all have been in linux-next with no reported issues" * tag 'usb-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: stusb160x: fix power-opmode property with typec-power-opmode USB: core: Change %pK for __user pointers to %px USB: core: Fix regression in Hercules audio card usb: gadget: Fix memleak in gadgetfs_fill_super usb: gadget: f_midi: Fix memleak in f_midi_alloc USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO built-in usb-audio card usb: typec: qcom-pmic-typec: fix builtin build errors phy: mediatek: fix spelling mistake in Kconfig "veriosn" -> "version" phy: qualcomm: Fix 28 nm Hi-Speed USB PHY OF dependency phy: qualcomm: usb: Fix SuperSpeed PHY OF dependency phy: intel: PHY_INTEL_KEEMBAY_EMMC should depend on ARCH_KEEMBAY usb: cdns3: gadget: calculate TD_SIZE based on TD usb: cdns3: gadget: initialize link_trb as NULL phy: cpcap-usb: Use IRQF_ONESHOT phy: qcom-qmp: Initialize another pointer to NULL phy: tegra: xusb: Fix dangling pointer on probe failure phy: usb: Fix incorrect clearing of tca_drv_sel bit in SETUP reg for 7211
2020-11-28Merge tag 'char-misc-5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.10-rc6. They include: - interconnect fixes for reported problems - habanalabs bugfix for found issue when doing the switch fallthrough patches - MAINTAINERS file update for coresight reviewers/maintainers All have been in linux-next with no reported issues" * tag 'char-misc-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: Adding help for coresight subsystem habanalabs/gaudi: fix missing code in ECC handling interconnect: fix memory trashing in of_count_icc_providers() interconnect: qcom: qcs404: Remove GPU and display RPM IDs interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes interconnect: qcom: msm8974: Don't boost the NoC rate during boot interconnect: qcom: msm8974: Prevent integer overflow in rate
2020-11-27Merge tag 'arm-soc-fixes-v5.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Another set of patches for devicetree files and Arm SoC specific drivers: - A fix for OP-TEE shared memory on non-SMP systems - multiple code fixes for the OMAP platform, including one regression for the CPSW network driver and a few runtime warning fixes - Some DT patches for the Rockchip RK3399 platform, in particular fixing the MMC device ordering that recently became nondeterministic with async probe. - Multiple DT fixes for the Tegra platform, including a regression fix for suspend/resume on TX2 - A regression fix for a user-triggered fault in the NXP dpio driver - A regression fix for a bug caused by an earlier bug fix in the xilinx firmware driver - Two more DTC warning fixes - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx platform" * tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) arm64: tegra: Fix Tegra234 VDK node names arm64: tegra: Wrong AON HSP reg property size arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1 arm64: tegra: Correct the UART for Jetson Xavier NX arm64: tegra: Disable the ACONNECT for Jetson TX2 optee: add writeback to valid memory type firmware: xilinx: Use hash-table for api feature check firmware: xilinx: Fix SD DLL node reset issue soc: fsl: dpio: Get the cpumask through cpumask_of(cpu) ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source MAINTAINERS: Remove myself as LPC32xx maintainers arm64: dts: qcom: clear the warnings caused by empty dma-ranges arm64: dts: broadcom: clear the warnings caused by empty dma-ranges ARM: dts: am437x-l4: fix compatible for cpsw switch dt node arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc. arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards. arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance arm64: dts: rockchip: fix NanoPi R2S GMAC clock name ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() ...
2020-11-27Merge tag 'net-5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc6, including fixes from the WiFi driver, and CAN subtrees. Current release - regressions: - gro_cells: reduce number of synchronize_net() calls - ch_ktls: release a lock before jumping to an error path Current release - always broken: - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header Previous release - regressions: - net/tls: fix missing received data after fast remote close - vsock/virtio: discard packets only when socket is really closed - sock: set sk_err to ee_errno on dequeue from errq - cxgb4: fix the panic caused by non smac rewrite Previous release - always broken: - tcp: fix corner cases around setting ECN with BPF selection of congestion control - tcp: fix race condition when creating child sockets from syncookies on loopback interface - usbnet: ipheth: fix connectivity with iOS 14 - tun: honor IOCB_NOWAIT flag - net/packet: fix packet receive on L3 devices without visible hard header - devlink: Make sure devlink instance and port are in same net namespace - net: openvswitch: fix TTL decrement action netlink message format - bonding: wait for sysfs kobject destruction before freeing struct slave - net: stmmac: fix upstream patch applied to the wrong context - bnxt_en: fix return value and unwind in probe error paths Misc: - devlink: add extra layer of categorization to the reload stats uAPI before it's released" * tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits) sock: set sk_err to ee_errno on dequeue from errq mptcp: fix NULL ptr dereference on bad MPJ net: openvswitch: fix TTL decrement action netlink message format can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0 can: m_can: fix nominal bitiming tseg2 min for version >= 3.1 can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given can: gs_usb: fix endianess problem with candleLight firmware ch_ktls: lock is not freed net/tls: Protect from calling tls_dev_del for TLS RX twice devlink: Make sure devlink instance and port are in same net namespace devlink: Hold rtnl lock while reading netdev attributes ptp: clockmatrix: bug fix for idtcm_strverscmp enetc: Let the hardware auto-advance the taprio base-time of 0 gro_cells: reduce number of synchronize_net() calls net: stmmac: fix incorrect merge of patch upstream ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init Documentation: netdev-FAQ: suggest how to post co-dependent series ibmvnic: enhance resetting status check during module exit ...
2020-11-27Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes in the UFS driver: two are for power management issues and the third is to fix a slew of problem in the sysfs code" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Fix race between shutdown and runtime resume flow scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()
2020-11-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Two security issues and several small bug fixes. Things seem to have stabilized for this release here. Summary: - Significant out of bounds access security issue in i40iw - Fix misuse of mmu notifiers in hfi1 - Several errors in the register map/usage in hns - Missing error returns in mthca" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/hns: Bugfix for memory window mtpt configuration RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP RDMA/hns: Fix wrong field of SRQ number the device supports IB/hfi1: Ensure correct mm is used at all times RDMA/i40iw: Address an mmap handler exploit in i40iw IB/mthca: fix return value of error branch in mthca_init_cq()
2020-11-27Merge tag 'mtd/fixes-for-5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: "Because of a recent change in the core, NAND controller drivers initializing the ECC engine too early in the probe path are broken. Drivers should wait for the NAND device to be discovered and its memory layout known before doing any ECC related initialization, so instead of reverting the faulty change which is actually moving in the right direction, let's fix the drivers directly: socrates, sharpsl, r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc, lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta, xway and gpio" * tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip() mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip() mtd: rawnand: r852: Move the ECC initialization to ->attach_chip() mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip() mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip() mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip() mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip() mtd: rawnand: orion: Move the ECC initialization to ->attach_chip() mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip() mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip() mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip() mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip() mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip() mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip() mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip() mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip() mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip() mtd: rawnand: xway: Move the ECC initialization to ->attach_chip() mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()
2020-11-27Merge tag 'spi-fix-v5.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few fixes for v5.10, one for the core which fixes some potential races for controllers with multiple chip selects when configuration of the chip select for one client device races with the addition and initial setup of an additional client" * tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: dw: Fix spi registration for controllers overriding CS spi: imx: fix the unbalanced spi runtime pm management spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts spi: Take the SPI IO-mutex in the spi_setup() method
2020-11-27Merge tag 'media/v5.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull virtual digital TV driver fixes from Mauro Carvalho Chehab: "A series of fixes for the new virtual digital TV driver (vidtv), which is meant to help doing tests with the digital TV core and media userspace apps and libraries. They cover a series of issues I found on it, together with a few new things in order to make it easier to detect problems at the DVB core" * tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (36 commits) media: vidtv.rst: add kernel-doc markups media: vidtv.rst: update vidtv documentation media: vidtv: simplify EIT write function media: vidtv: simplify NIT write function media: vidtv: simplify SDT write function media: vidtv: cleanup PMT write table function media: vidtv: cleanup PAT write function media: vidtv: cleanup PSI table header function media: vidtv: cleanup PSI descriptor write function media: vidtv: simplify the crc writing logic media: vidtv: simplify PSI write function media: vidtv: add date to the current event media: vidtv: fix service_id at SDT table media: vidtv: fix service type media: vidtv: add a PID entry for the NIT table media: vidtv: properly fill EIT service_id media: vidtv: fix the network ID range media: vidtv: improve EIT data media: vidtv: cleanup null packet initialization logic media: vidtv: pre-initialize mux arrays ...
2020-11-27Merge tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Unfortunately this has a bit of thanksgiving stuffing in it, as it a bit larger (at least the vc4 patches) than I like at this point in time. The main thing is it has a bunch of regressions fixes for reports in the last couple of weeks, ast, nouveau and the amdgpu ttm init fix, along with the usual selection of amdgpu and i915 fixes. The vc4 fixes are a few but they are fixes and the nastiest one is a fix for when you have a 2.4Ghz Wifi and a HDMI signal with a clock in that range and there isn't enough shielding and interference happen between the two, the fix adjusts the mode clock to try and avoid the wifi channels in that case. Hopefully you can merge this between turkey slices, and next week should be quieter. ast: - LUT loading regression fix nouveau: - relocations regression fix amdgpu: - ttm init oops fix - Runtime pm fix - SI UVD suspend/resume fix - HDCP fix for headless cards - Sienna Cichlid golden register update i915: - Fix Perf/OA workaround register corruption (Lionel) - Correct a comment statement in GVT (Yan) - Fix GT enable/disable iterrupts, including a race condition that prevented GPU to go idle (Chris) - Free stale request on destroying the virtual engine (Chris) exynos: - config dependency fix mediatek: - unused var removal - horizonal front/back porch formula fix vc4: - wifi and hdmi interference fix - mode rejection fixes - use after free fix - cleanup some code" * tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm: (28 commits) drm/nouveau: fix relocations applying logic and a double-free drm/ast: Reload gamma LUT after changing primary plane's color format drm/amdgpu: Fix size calculation when init onchip memory drm/amdgpu: update golden setting for sienna_cichlid drm/amd/display: Avoid HDCP initialization in devices without output drm/i915/gt: Free stale request on destroying the virtual engine drm/i915/gt: Don't cancel the interrupt shadow too early drm/i915/gt: Track signaled breadcrumbs outside of the breadcrumb spinlock drm/amdgpu: fix a page fault drm/amdgpu: fix SI UVD firmware validate resume fail drm/amd/amdgpu: fix null pointer in runtime pm drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission drm/i915/gvt: correct a false comment of flag F_UNALIGN drm/i915/perf: workaround register corruption in OATAILPTR drm/vc4: kms: Don't disable the muxing of an active CRTC drm/vc4: kms: Store the unassigned channel list in the state drm/exynos: depend on COMMON_CLK to fix compile tests drm/mediatek: dsi: Modify horizontal front/back porch byte formula drm/vc4: hdmi: Disable Wifi Frequencies dt-bindings: display: Add a property to deal with WiFi coexistence ...
2020-11-27Merge tag 'platform-drivers-x86-v5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - thinkpad_acpi fixes: two bug-fixes and three model specific quirks - fixes for misc other drivers: two bug-fixes and three model specific quirks * tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC platform/x86: toshiba_acpi: Fix the wrong variable assignment platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan control platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time platform/x86: thinkpad_acpi: Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen platform/x86: thinkpad_acpi: Do not report SW_TABLET_MODE on Yoga 11e platform/x86: thinkpad_acpi: add P1 gen3 second fan support
2020-11-27Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The main changes are relating to our handling of access/dirty bits, where our low-level page-table helpers could lead to stale young mappings and loss of the dirty bit in some cases (the latter has not been observed in practice, but could happen when clearing "soft-dirty" if we enabled that). These were posted as part of a larger series, but the rest of that is less urgent and needs a v2 which I'll get to shortly. In other news, we've now got a set of fixes to resolve the lockdep/tracing problems that have been plaguing us for a while, but they're still a bit "fresh" and I plan to send them to you next week after we've got some more confidence in them (although initial CI results look good). Summary: - Fix kerneldoc warnings generated by ACPI IORT code - Fix pte_accessible() so that access flag is ignored - Fix missing header #include - Fix loss of software dirty bit across pte_wrprotect() when HW DBM is enabled" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect() arm64: pgtable: Fix pte_accessible() ACPI/IORT: Fix doc warnings in iort.c arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
2020-11-27Merge tag 'iommu-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull iommu fixes from Will Deacon: "Here's another round of IOMMU fixes for -rc6 consisting mainly of a bunch of independent driver fixes. Thomas agreed for me to take the x86 'tboot' fix here, as it fixes a regression introduced by a vt-d change. - Fix intel iommu driver when running on devices without VCCAP_REG - Fix swiotlb and "iommu=pt" interaction under TXT (tboot) - Fix missing return value check during device probe() - Fix probe ordering for Qualcomm SMMU implementation - Ensure page-sized mappings are used for AMD IOMMU buffers with SNP RMP" * tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: iommu/vt-d: Don't read VCCAP register unless it exists x86/tboot: Don't disable swiotlb when iommu is forced on iommu: Check return of __iommu_attach_device() arm-smmu-qcom: Ensure the qcom_scm driver has finished probing iommu/amd: Enforce 4k mapping for certain IOMMU data structures
2020-11-27Merge tag 'optee-valid-memory-type-for-v5.11' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Add writeback to valid OP-TEE shared memory types Allows OP-TEE to work with ARMv7 based single CPU systems by allowing writeback cache policy for shared memory. * tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee: optee: add writeback to valid memory type Link: https://lore.kernel.org/r/20201125120134.GA1642471@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27usb: typec: stusb160x: fix power-opmode property with typec-power-opmodeAmelie Delaunay
Device tree property is named typec-power-opmode, not power-opmode. Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201127131735.28280-1-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-27Merge tag 'omap-for-v5.10/fixes-rc5-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for various issues noticed during the -rc cycle: - Earlier omap4 cpuidle fix was incomplete and needs to use a configured idle state instead - Fix am4 cpsw driver compatible to avoid invalid resource error for the legacy driver - Two kconfig fixes for genpd support that we added for for v5.10 for proper location of the option and adding missing option - Fix ti-sysc reset status checking on enabling modules to ignore quirky modules with reset status only usable when the quirk is activated during reset. Also fix bogus resetdone warning for cpsw and modules with no sysst register reset status bit - Suppress a ti-sysc warning for timers reserved as system timers - Fix the ordering of clocks for dra7 m_can * tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra76x: m_can: fix order of clocks bus: ti-sysc: suppress err msg for timers used as clockevent/source ARM: dts: am437x-l4: fix compatible for cpsw switch dt node ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled() bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0Pankaj Sharma
Add support for mcan bit timing and control mode according to bosch mcan IP version 3.3.0. The mcan version read from the Core Release field of CREL register would be 33. Accordingly the properties are to be set for mcan v3.3.0 Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@samsung.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-27can: m_can: fix nominal bitiming tseg2 min for version >= 3.1Marc Kleine-Budde
At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid register values for "Nominal Time segment after sample point (NTSEG2)" are from 1 to 127. As the hardware uses a value of one more than the programmed value, mean tseg2_min is 2. This patch fixes the tseg2_min value accordingly. Cc: Dan Murphy <dmurphy@ti.com> Cc: Mario Huettel <mario.huettel@gmx.net> Acked-by: Sriram Dash <sriram.dash@samsung.com> Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de Fixes: b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-04-24 21:16:10 +0000