summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-04-18drm/sun4i: Use DRM_GEM_CMA_VMAP_DRIVER_OPS for GEM operationsPaul Kocialkowski
Our driver makes a typical use of CMA, with GEM object allocated as GEM CMA objects. Use DRM_GEM_CMA_VMAP_DRIVER_OPS to describe the ops instead of duplicating them. Because DRM_GEM_CMA_VMAP_DRIVER_OPS implements a gem_create_object op which sets per-object funcs (drm_cma_gem_default_funcs), we can also get rid of free_object_unlocked and gem_vm_ops, which are superseded by the object funcs. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418130509.3569-1-paul.kocialkowski@bootlin.com
2019-04-18drm/panfrost: Prevent concurrent resetsTomeu Vizoso
If a job times out in slot 0 while a reset is performed because a job timed out in slot 1, the drm-sched core can get into a deadlock. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190418084305.45021-1-tomeu.vizoso@collabora.com
2019-04-18drm/panfrost: depend on !GENERIC_ATOMIC64 when using COMPILE_TESTSteven Price
Since panfrost has a 'select' on IOMMU_IO_PGTABLE_LPAE we must depend on the same set of flags. Otherwise IOMMU_IO_PGTABLE_LPAE will be forced on even though it cannot build (no support for cmpxchg64). This fixes the following warning from kconfig: WARNING: unmet direct dependencies detected for IOMMU_IO_PGTABLE_LPAE Depends on [n]: IOMMU_SUPPORT [=y] && (ARM || ARM64 || COMPILE_TEST [=y] && !GENERIC_ATOMIC64 [=y]) Selected by [y]: - DRM_PANFROST [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARM || ARM64 || COMPILE_TEST [=y]) && MMU [=y] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190417152928.10790-1-steven.price@arm.com
2019-04-18drm/panfrost: Add missing includeSteven Price
Fix sparse warnings: drivers/gpu/drm/panfrost/panfrost_devfreq.c:133:5: warning: symbol 'panfrost_devfreq_init' was not declared. Should it be static? drivers/gpu/drm/panfrost/panfrost_devfreq.c:168:6: warning: symbol 'panfrost_devfreq_resume' was not declared. Should it be static? drivers/gpu/drm/panfrost/panfrost_devfreq.c:182:6: warning: symbol 'panfrost_devfreq_suspend' was not declared. Should it be static? drivers/gpu/drm/panfrost/panfrost_devfreq.c:212:6: warning: symbol 'panfrost_devfreq_record_transition' was not declared. Should it be static? Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/7c9d75dd-ec67-4491-ca0c-79743211f308@arm.com
2019-04-18drm/panfrost: Make panfrost_gem_free_object() staticYueHaibing
Fix sparse warning: drivers/gpu/drm/panfrost/panfrost_gem.c:17:6: warning: symbol 'panfrost_gem_free_object' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190416150051.34092-1-yuehaibing@huawei.com
2019-04-18drm/rockchip: shutdown drm subsystem on shutdownVicente Bergas
As explained by Robin Murphy: > the IOMMU shutdown disables paging, so if the VOP is still > scanning out then that will result in whatever IOVAs it was using now going > straight out onto the bus as physical addresses. We had a more radical approach before in commit 7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") but that resulted in new warnings and oopses on shutdown on rk3399 chromeos devices. So second try is resurrecting Vicentes shutdown change which should achieve the same result but in a less drastic way. Fixes: 63238173b2fa ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Brian Norris <briannorris@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org Suggested-by: JeffyChen <jeffy.chen@rock-chips.com> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Vicente Bergas <vicencb@gmail.com> [adapted commit message to explain the history] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.de
2019-04-17drm/panel: simple: add lg,acx467akm-7 panelJonathan Marek
Add ACX467AKM-7 4.95" 1080×1920 LCD panel that is found on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek <jonathan@marek.ca> [masneyb@onstation.org: checkpatch fixes; rename jdi,1080p-hammerhead binding to lg,acx467akm-7.] Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181124200628.24393-2-masneyb@onstation.org
2019-04-17drm/meson: add size and alignment requirements for dumb buffersNeil Armstrong
The Amlogic SoCs Canvas buffers stride must be aligned on 64bytes and overall size should be aligned on PAGE width. Adds a custom dumb_create op to adds these requirements. Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Suggested-by: Sky Zhou <sky.zhou@amlogic.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Sky Zhou <sky.zhou@amlogic.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190408090137.2402-1-narmstrong@baylibre.com
2019-04-17drm/meson: Make some functions staticYueHaibing
Fix sparse warnings: drivers/gpu/drm/meson/meson_viu.c:93:6: warning: symbol 'meson_viu_set_g12a_osd1_matrix' was not declared. Should it be static? drivers/gpu/drm/meson/meson_viu.c:121:6: warning: symbol 'meson_viu_set_osd_matrix' was not declared. Should it be static? drivers/gpu/drm/meson/meson_viu.c:190:6: warning: symbol 'meson_viu_set_osd_lut' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190413141455.34020-1-yuehaibing@huawei.com
2019-04-17drm/sun4i: Make some symbols staticYueHaibing
Fix sparse warnings: drivers/gpu/drm/sun4i/sun8i_tcon_top.c:271:36: warning: symbol 'sun8i_r40_tcon_top_quirks' was not declared. Should it be static? drivers/gpu/drm/sun4i/sun8i_tcon_top.c:276:36: warning: symbol 'sun50i_h6_tcon_top_quirks' was not declared. Should it be static? drivers/gpu/drm/sun4i/sun4i_tcon.c:239:6: warning: symbol 'sun4i_tcon_set_mux' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416145855.20852-1-yuehaibing@huawei.com
2019-04-17drm/lima: Make lima_sched_ops staticYueHaibing
Fix sparse warning: drivers/gpu/drm/lima/lima_sched.c:356:36: warning: symbol 'lima_sched_ops' was not declared. Should it be static? Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416144353.34024-1-yuehaibing@huawei.com
2019-04-17drm: add drm_format_helper.c to kerneldocGerd Hoffmann
Also drop the dstclip parameter sphinx has warned about (leftover from an earlier patch version). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20190416090533.28374-1-kraxel@redhat.com
2019-04-16drm/lima: Use the drm_gem_fence_array_add helpers for our deps.Eric Anholt
It's a pretty direct port of what I did for v3d. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-8-eric@anholt.net Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com>
2019-04-16drm: Add helpers for setting up an array of dma_fence dependencies.Eric Anholt
I needed to add implicit dependency support for v3d, and Rob Herring has been working on it for panfrost, and I had recently looked at the lima implementation so I think this will be a good intersection of what we all want and simplify our scheduler implementations. v2: Rebase on xa_limit_32b API change, and tiny checkpatch cleanups on the way in (unsigned int vs unsigned, extra return before EXPORT_SYMBOL_GPL) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190401222635.25013-6-eric@anholt.net Reviewed-and-tested-by: Qiang Yu <yuq825@gmail.com> (v1)
2019-04-16drm: Expose "FB_DAMAGE_CLIPS" property to atomic aware user-space onlyDeepak Rawat
Plane property "FB_DAMAGE_CLIPS" can only be used by atomic aware user-space, so no point exposing it otherwise. Cc: <stable@vger.kernel.org> Signed-off-by: Deepak Rawat <drawat@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: d3b21767821e ("drm: Add a new plane property to send damage during plane update") Link: https://patchwork.freedesktop.org/patch/msgid/20190415172814.9840-1-drawat@vmware.com
2019-04-16drm: aspeed: Clean up Kconfig optionsJoel Stanley
The GFX IP is inside of the ASPEED BMC SoC so there is little use enabling it on a kernel that does not support ASPEED. When building with COMPILE_TEST the architecture many not have CMA support, so to avoid breaking the build we only select these options if the architecture supports the contiguous allocator. I suspect the DRM_PANEL came from a cut/paste error. Fixes: 4f2a8f5898ec ("drm: Add ASPEED GFX driver") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190405081117.27339-1-joel@jms.id.au
2019-04-16dma-buf: explicitely note that dma-fence-chains use 64bit seqnoChristian König
Instead of checking the upper values of the sequence number use an explicit field in the dma_fence_ops structure to note if a sequence should be 32bit or 64bit. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/299655/
2019-04-12drm/panfrost: Add support for 2MB page entriesRob Herring
Add support for 2MB sized pages. This will improve our map and unmap times and save a bit of memory by avoiding 3rd level page tables for contiguous allocations. As we use shmem for buffers and huge page allocations for shmem are off by default, there isn't an improvement out of the box and userspace must enable THP for shmem. It's not clear if the h/w can support 1GB page sizes which standard ARM long format descriptors support. In any case, it is unlikely we'll see any contiguous 1GB allocations on current h/w. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190411215313.1937-1-robh@kernel.org
2019-04-12drm/panfrost: Add initial panfrost driverRob Herring
This adds the initial driver for panfrost which supports Arm Mali Midgard and Bifrost family of GPUs. Currently, only the T860 and T760 Midgard GPUs have been tested. v2: - Add GPU reset on job hangs (Tomeu) - Add RuntimePM and devfreq support (Tomeu) - Fix T760 support (Tomeu) - Add a TODO file (Rob, Tomeu) - Support multiple in fences (Tomeu) - Drop support for shared fences (Tomeu) - Fill in MMU de-init (Rob) - Move register definitions back to single header (Rob) - Clean-up hardcoded job submit todos (Rob) - Implement feature setup based on features/issues (Rob) - Add remaining Midgard DT compatible strings (Rob) v3: - Add support for reset lines (Neil) - Add a MAINTAINERS entry (Rob) - Call dma_set_mask_and_coherent (Rob) - Do MMU invalidate on map and unmap. Restructure to do a single operation per map/unmap call. (Rob) - Add a missing explicit padding to struct drm_panfrost_create_bo (Rob) - Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150" - Drop HW_FEATURE_AARCH64_MMU conditional (Rob) - s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob) - Check drm_gem_shmem_prime_import_sg_table() error code (Rob) - Re-order power on sequence (Rob) - Move panfrost_acquire_object_fences() before scheduling job (Rob) - Add NULL checks on array pointers in job clean-up (Rob) - Rework devfreq (Tomeu) - Fix devfreq init with no regulator (Rob) - Various WS and comments clean-up (Rob) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org
2019-04-12drm: Add a drm_gem_objects_lookup helperRob Herring
Similar to the single handle drm_gem_object_lookup(), drm_gem_objects_lookup() takes an array of handles and returns an array of GEM objects. v2: - Take the userspace pointer directly and allocate the array. - Expand the function documentation. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Acked-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-3-robh@kernel.org
2019-04-12iommu: io-pgtable: Add ARM Mali midgard MMU page table formatRob Herring
ARM Mali midgard GPU is similar to standard 64-bit stage 1 page tables, but have a few differences. Add a new format type to represent the format. The input address size is 48-bits and the output address size is 40-bits (and possibly less?). Note that the later bifrost GPUs follow the standard 64-bit stage 1 format. The differences in the format compared to 64-bit stage 1 format are: The 3rd level page entry bits are 0x1 instead of 0x3 for page entries. The access flags are not read-only and unprivileged, but read and write. This is similar to stage 2 entries, but the memory attributes field matches stage 1 being an index. The nG bit is not set by the vendor driver. This one didn't seem to matter, but we'll keep it aligned to the vendor driver. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: iommu@lists.linux-foundation.org Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-2-robh@kernel.org
2019-04-12drm/bridge: ti-tfp410: Set the bus_formatPeter Ujfalusi
The TFP410 supports 24 bit, single-edge and 12 bit, dual-edge modes. Depending on how many wires are used (24/12) the driver can set the correct bus_format. If the information is not available in DT then assume 24 bit, single-edge setup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-3-peter.ujfalusi@ti.com
2019-04-12drm/bridge: ti-tfp410: Fall back to HPD polling if HPD irq is not availablePeter Ujfalusi
In case either the HPD gpio is not specified or when the HPD gpio can not be used as interrupt we should tell the core that the HPD needs to be polled for detecting hotplug. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401123342.15767-1-peter.ujfalusi@ti.com
2019-04-11drm: fix drm_fb_xrgb8888_to_rgb888_dstclip()Gerd Hoffmann
Oops, the __iomem annotation was added to the header file only. Add it to the implementation (and documentation) too. Fixes: 5c5373b51bec ("drm: switch drm_fb_xrgb8888_to_rgb888_dstclip to accept __iomem dst") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190411044932.13247-1-kraxel@redhat.com
2019-04-11drm/tinydrm: Fix fbdev pixel formatNoralf Trønnes
Due to copy/paste error, the fbdev format was changed to 32bpp = XRGB8888 which is an emulated format for the RGB565 drivers. Revert to to using the fallback which is dev->mode_config.preferred_depth for the drivers that set it or 32bpp for those that don't (repaper, st7586). Fixes: 3eba3922819f ("drm/tinydrm: Drop using tinydrm_device") Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190410124345.25945-1-noralf@tronnes.org
2019-04-11drm/i915/fbdev: Move intel_fb_initial_config() to fbdev helperNoralf Trønnes
It is generic code and having it in the helper will let other drivers benefit from it. One change was necessary assuming this to be true: INTEL_INFO(dev_priv)->num_pipes == dev->mode_config.num_crtc Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190407165243.54043-4-noralf@tronnes.org
2019-04-11drm/client: Rename drm_client_add() to drm_client_register()Noralf Trønnes
This is done to stay consistent with our naming scheme of _register() = others can start calling us from any thread. Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190403125658.32389-1-noralf@tronnes.org
2019-04-11drm/sun4i: Rely on dma interconnect for our RAM offsetMaxime Ripard
Now that we can express our DMA topology, rely on those property instead of hardcoding an offset from the dma_addr_t which wasn't really great. We still need to add some code to deal with the old DT that would lack that property, but we move the offset to the DRM device dma_pfn_offset to be able to rely on just the dma_addr_t associated to the GEM object. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/5df781318e7e05f780a11ed243dcf2b9fe8a08cb.1554108995.git-series.maxime.ripard@bootlin.com
2019-04-10Merge drm/drm-next into drm-misc-nextSean Paul
Finally have a reason for a backmerge other than "it's been a while"! Backmerging drm-next to -misc-next to facilitate Rob Herring's work on Panfrost. Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-04-10drm/bochs: use simple display pipeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190410074828.10296-1-kraxel@redhat.com
2019-04-10drm: switch drm_fb_xrgb8888_to_rgb888_dstclip to accept __iomem dstGerd Hoffmann
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_xrgb8888_to_rgb888_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). The helper function (drm_fb_xrgb8888_to_rgb888_line) has been changed to process a single scanline. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190410063815.17062-4-kraxel@redhat.com
2019-04-10drm: switch drm_fb_xrgb8888_to_rgb565_dstclip to accept __iomem dstGerd Hoffmann
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_xrgb8888_to_rgb565_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). The helper function (drm_fb_xrgb8888_to_rgb565_line) has been changed to process a single scanline. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190410063815.17062-3-kraxel@redhat.com
2019-04-10drm: switch drm_fb_memcpy_dstclip to accept __iomem dstGerd Hoffmann
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_memcpy_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). With that separating out the memcpy loop into the drm_fb_memcpy_lines() helper isn't useful any more, so move the code back into the calling functins. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190410063815.17062-2-kraxel@redhat.com
2019-04-09drm/lima: include used header file explicitlyQiang Yu
To prevent build fail on some platform which does not have it in the include file chain. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Suggested-by: Randy Dunlap <rdunlap@infradead.org> Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190409003617.4470-2-yuq825@gmail.com
2019-04-09drm/lima: add missing Kconfig dependencyQiang Yu
Current implementation does not support MMU-less plarforms. Suggested-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190409003617.4470-1-yuq825@gmail.com
2019-04-09drm/meson: Add G12A support for the DW-HDMI GlueNeil Armstrong
The Amlogic G12A embeds the same Synopsys DW-HDMI Controller, but with : - a "backport" of the HDR signaling registers from more recent DW-HDMI controllers, this will need a tweak since it's not normally present on this version of the DW-HDMI controller - A direct mapping of TOP and DW-HDMI registers instead of an internal bus accessed using read/write registers - Support for RX-SENSE, but not yet implemented - Support for HDMI 2.1 Dynamic HDR, but not yet implemented - Different registers mapping for the HDMI PHY setup This patchs adds support for these changes while providing exact same support as the previous GXBB, GXL & GXM SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-12-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A compatibleNeil Armstrong
Finally add the Amlogic G12A SoC compatible for the VPU driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-11-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A Video Clock setupNeil Armstrong
While switching to the Common Clock Framework is still Work In Progress, this patch adds the corresponding G12A HDMI PLL setup to be on-par with the other SoCs support. The G12A has only a single tweak about the high frequency setup, where the HDMI PLL needs a specific setup to handle correctly the 5.94GHz DCO frequency. Apart that, it handls ecorrectly all the other HDMI frequencies and can achieve even better DMT clock frequency precision with the larger fractional dividier width. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-10-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A support for CVBS EncoderNeil Armstrong
The Meson G12A SoCs uses the exact same CVBS encoder except a simple CVBS DAC register offset and settings delta. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed subject typo] Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-9-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A support for plane handling in CRTC driverNeil Armstrong
This patch adds support for the new OSD+VD Plane blending module in the CRTC code by adding the G12A code to manage the blending module and setting the right OSD1 & VD1 plane registers. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-8-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A Support for the Overlay video planeNeil Armstrong
Amlogic G12A SoC supports the same set of Video Planes, but now are handled by the new OSD plane blender module. This patch uses the same VD1 plane for G12A, using the exact same scaler and VD1 setup registers, except using the new blender register to disable the plane. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fix typo in commit log] Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-7-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A support for OSD1 PlaneNeil Armstrong
Amlogic G12A SoC supports now up to 3 OSD planes (1 more than the previous SoCs) and a brand new OSD plane blender module. This patch uses the same OSD1 plane for G12A, using the exact same scaler and OSD1 setup registers, except using the new blender register to disable the plane. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed typo in commit log] Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-6-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A Support for VIU setupNeil Armstrong
Amlogic G12A SoC needs a different VIU setup code, handle it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-5-narmstrong@baylibre.com
2019-04-09drm/meson: Add G12A Support for VPP setupNeil Armstrong
Amlogic G12A needs a different VPP setup code, handle it here. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-4-narmstrong@baylibre.com
2019-04-09drm/meson: Add registers for G12A SoCNeil Armstrong
This patch adds the new VPU registers added since the Amlogic GXM SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-3-narmstrong@baylibre.com
2019-04-09drm/meson: Switch PLL to 5.94GHz base for 297Mhz pixel clockNeil Armstrong
On Amlogic G12A SoC, the 2,97GHz PLL frequency is not stable enough to provide a correct 297MHz pixel clock, so switch the PLL base frequency with a /2 OD when the 297MHz pixel clock is requested. This solves the issue on G12A and also works fine on GXBB, GXL & GXM. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190325141824.21259-2-narmstrong@baylibre.com
2019-04-08drm/cirrus: rewrite and modernize driver.Gerd Hoffmann
Time to kill some bad sample code people are copying from ;) This is a complete rewrite of the cirrus driver. The cirrus_mode_set() function is pretty much the only function which is carried over largely unmodified. Everything else is upside down. It is a single monster patch. But given that it does some pretty fundamental changes to the drivers workflow and also reduces the code size by roughly 70% I think it'll still be alot easier to review than a longish baby-step patch series. Changes summary: - Given the small amout of video memory (4 MB) the cirrus device has the rewritten driver doesn't try to manage buffers there. Instead it will blit (memcpy) the active framebuffer to video memory. - All gem objects are stored in main memory and are manged using the new shmem helpers. ttm is out. - It supports RG16, RG24 and XR24 formats. XR24 gets converted to RG24 or RG16 at blit time if needed, to avoid the pitch becoming larger than what the cirrus hardware can handle. - The simple display pipeline is used. - The generic fbdev emulation is used. - It's a atomic driver now. - It runs wayland. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-6-kraxel@redhat.com
2019-04-08drm: add drm_fb_xrgb8888_to_rgb888_dstclip()Gerd Hoffmann
Simliar to drm_fb_xrgb8888_to_rgb565_dstclip() but converts to rgb888 instead of rgb565. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-5-kraxel@redhat.com
2019-04-08drm: add drm_fb_xrgb8888_to_rgb565_dstclip()Gerd Hoffmann
It is a drm_fb_xrgb8888_to_rgb565() variant which checks the clip rectangle for the destination too. Common code between drm_fb_xrgb8888_to_rgb565() and drm_fb_xrgb8888_to_rgb565_dstclip() was factored out into the drm_fb_xrgb8888_to_rgb565_lines() helper function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-4-kraxel@redhat.com
2019-04-08drm: add drm_fb_memcpy_dstclip() helperGerd Hoffmann
It is a drm_fb_memcpy() variant which checks the clip rectangle for the destination too. Common code between drm_fb_memcpy() and drm_fb_memcpy_dstclip() was factored out into the drm_fb_memcpy_lines() helper function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190405095219.9231-3-kraxel@redhat.com
generated by cgit (git 2.34.1) at 2025-04-07 01:30:55 +0000