| Age | Commit message (Collapse) | Author |
|---|
|
Like other switches, the Aten CS-1758 KVM switch needs a quirk to avoid
spewing errors:
[12599018.071059] usb 5-2: input irq status -75 received
[12599018.079053] usb 5-2: input irq status -75 received
Signed-off-by: Vasilis Liaskovitis <vliaskovitis@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
It apears that devices designed around Wacom's G11 chipset (e.g. Lenovo
ThinkPad Yoga 260, Lenovo ThinkPad X1 Yoga, Dell XPS 12 9250, Dell Venue
8 Pro 5855, etc.) suffer from a common issue in their HID descriptors.
The logical maximum is not updated for the "Contact Identifier" usage,
leaving it as just "1" despite these devices being capable of tracking
far more touches.
Commit 60a221869803 began ignoring usages with out-of-range values,
causing problems for devices based on this chipset. Touches after
the first will have an out-of-range Contact Identifier, and ignoring
that usage will cause the kernel to incorrectly slot each finger's
events (along with all the knock-on userspace effects that entails).
This commit checks for these buggy descriptors and updates the maximum
where required. Prior chipsets have used "255" as the maximum (and the
G11, at least, doesn't seem to actually use IDs outside the range of
1..CONTACTMAX) so continue using this value.
Cc: stable@vger.kernel.org
Fixes: 60a221869803 ("HID: wacom: generic: add support for touchring")
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Because HID_DG_TOOLSERIALNUMBER doesn't first cast the value recieved from HID
to an unsigned type, sign-extension rules can cause the value of
wacom_wac->serial[0] to inadvertently wind up with all 32 of its highest bits
set if the highest bit of "value" was set.
This can cause problems for Tablet PC devices which use AES sensors and the
xf86-input-wacom userspace driver. It is not uncommon for AES sensors to send a
serial number of '0' while the pen is entering or leaving proximity. The
xf86-input-wacom driver ignores events with a serial number of '0' since it
cannot match them up to an in-use tool. To ensure the xf86-input-wacom driver
does not ignore the final out-of-proximity event, the kernel does not send
MSC_SERIAL events when the value of wacom_wac->serial[0] is '0'. If the highest
bit of HID_DG_TOOLSERIALNUMBER is set by an in-prox pen which later leaves
proximity and sends a '0' for HID_DG_TOOLSERIALNUMBER, then only the lowest 32
bits of wacom_wac->serial[0] are actually cleared, causing the kernel to send
an MSC_SERIAL event. Since the 'input_event' function takes an 'int' as
argument, only those lowest (now-cleared) 32 bits of wacom_wac->serial[0] are
sent to userspace, causing xf86-input-wacom to ignore the event. If the event
was the final out-of-prox event, then xf86-input-wacom may remain in a state
where it believes the pen is in proximity and refuses to allow other devices
under its control (e.g. the touchscreen) to move the cursor.
It should be noted that EMR devices and devices which use both the
HID_DG_TOOLSERIALNUMBER and WACOM_HID_WD_SERIALHI usages (in that order) would
be immune to this issue. It appears only AES devices are affected.
Fixes: f85c9dc678a ("HID: wacom: generic: Support tool ID and additional tool types")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This reverts commit 279967a65b320d174a507498aea7d44db3fee7f4.
Multiple regressions [1] [2] [3] have been reported. The hid-rmi
support would have to fixed and redone in 4.11+.
[1] http://lkml.kernel.org/r/b79b88c8-770a-13f6-5668-c3a94254e5e0@gmail.com
[2] http://lkml.kernel.org/r/375e67b5-2cb8-3491-1d71-d8650d6e9451@gmail.com
[3] https://bugzilla.kernel.org/show_bug.cgi?id=195287
Reported-by: Cameron Gutman <aicommander@gmail.com>
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: Lorenzo J. Lucchini <ljlbox@tiscali.it>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
This device has a different vendor id but responds to initialization.
Signed-off-by: Xiaolei Yu <dreifachstein@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Commit a544c619a54b ("HID: wacom: do not attempt to switch mode
while in probe") introduces delayed work for querying (setting the
mode) on all tablets. Bamboo Touch (056a:00d0) has a ghost
interface which claims to be a pen device. Though this device can
be removed, we have to set the mode on the ghost pen interface
before we remove it. After the aforementioned delay was introduced
the device was being removed before the mode setting could be
executed.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
A previous commit (below) adds a check for already probed interfaces to
Wacom's matching heuristic. Unfortunately this causes the Bamboo Pen
(CTL-460) to match itself to its 'ghost' touch interface. After
subsequent changes to the driver this match to the ghost causes the
kernel to crash. This patch avoids calling wacom_add_shared_data()
for the BAMBOO_PEN's ghost touch interface.
Fixes: 41372d5d40e7 ("HID: wacom: Augment 'oVid' and 'oPid' with heuristics for HID_GENERIC")
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
There is a new clone of the XIN MO arcade controller which has same issue with
out of range like the original. This fix will solve the issue where 2
directions on the joystick are not recognized by the new THT 2P arcade
controller with device ID 0x75e1. In details the new device ID is added the
hid-id list and the hid-xinmo source code.
Signed-off-by: Peter Stein <peter@stuntstein.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Commit f85c9dc ("Support tool ID and additional tool types") introduced mouse
and lens cursor tools to generic codepath, which covers both display (direct)
and opaque tablets (indirect devices). However, mouse and lens cursor tools are
only provided for opaque tablets. This patch ignores mouse and lens cursor tools
if the device is a display tablet.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
hid-corsair
This mouse sold by Corsair as Scimitar PRO RGB defines two consecutive
Logical Minimum items in its Application (Consumer.0001) report making
it non parseable. This patch fixes the report descriptor overriding
byte 77 in rdesc from 0x16 (Logical Minimum with 16 bits value) to 0x26
(Logical Maximum with 16 bits value).
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add quirks for several corsair gaming devices to avoid long delays on
report initialization
Supported devices:
- Corsair K65RGB Rapidfire Gaming Keyboard
- Corsair K70RGB Rapidfire Gaming Keyboard
- Corsair Scimitar Pro RGB Gaming Mouse
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Commit 5b779fc introduces the manual release of resources in wacom_remove() as
an addition to the driver's use of devm. The EKR resources can only be
released through wacom_remote_destroy_one() so we skip the manual release for
it.
Fixes: 5b779fc ("HID: wacom: release the resources before leaving despite devm")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The features struct for the second gen Intuos Pro uses the wrong constant for
the resolution. This fix is for commit 4922cd2.
Fixes: 4922cd2 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Signed-off-by: Aaron Armstrong Skomra <skomra@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When a user connects a DS4 twice using USB and BT, we reject the
second device connection after the setup work. We then perform
a cleanup, but during cleanup we are not removing the touchpad
device. This leads to leakage of an input device, which we would
never remove. It can likely result into a kernel oops as well
when the touchpad evdev node is accessed and the underlaying HID
device has been removed from the system.
[jkosina@suse.cz: added stable annotation]
Fixes: ac797b95f532 ("HID: sony: Make the DS4 touchpad a separate device")
Cc: stable@vger.kernel.org
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add support for media keys on the keyboard that comes with the
Asus V221ID and ZN241IC All In One computers.
The keys to support here are WLAN, BRIGHTNESSDOWN and BRIGHTNESSUP.
This device is not visibly branded as Chicony, and the USB Vendor ID
suggests that it is a JESS device. However this seems like the right place
to put it: the usage codes are identical to the currently supported
devices, and this driver already supports the ASUS AIO keyboard AK1D.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Commit 279967a65b32 ("HID: rmi: Handle all Synaptics touchpads using hid-rmi")
unconditionally switches over handling of all Synaptics touchpads to hid-rmi
(to make use of extended features of the HW); in case CONFIG_HID_RMI is
disabled though this renders the touchpad unusable, as the
HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID)
match doesn't exist and generic/multitouch doesn't bind to it either (due
to hid group mismatch).
Fix this by switching over to hid-rmi only if it has been actually built.
Fixes: 279967a65b32 ("HID: rmi: Handle all Synaptics touchpads using hid-rmi")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Andrew Duggan <aduggan@synaptics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- a lot of Wacom driver updates; most notably second generation Intuos
Pro is now supported, code from Aaron Armstrong Skomra and Jason
Gerecke
- Surface 3 and 4 Type Cover Pro support from Daniel Keller, Dennis
Chen and Yuta Kobayashi
- hid-rmi is now generic transport driver, used by synaptics-rmi4;
Support the Lenovo Thinkpad X1 Tablet dock follows on top, from
Andrew Duggan
- a few misc bugfixes and improvements here and there
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
HID: intel-ish-hid: constify device_type structure
HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range
HID: intel-ish-hid: ipc: check FW status to distinguish ISH resume paths
HID: multitouch: fix LG Melfas touchscreen
HID: wacom: don't apply generic settings to old devices
HID: wacom: generic: support LEDs
HID: wacom: generic: support generic touch switch
HID: wacom: generic: add vendor defined touch
HID: wacom: generic: add support for touchring
HID: wacom: generic: remove input_event_flag
HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface
HID: wacom: Move WAC_CMD_* into wacom_wac.h
HID: wacom: Enable HID_GENERIC codepath for Bluetooth devices
HID: wacom: do not attempt to switch mode while in probe
HID: wacom: remove warning while disconnecting devices
HID: wacom: release the resources before leaving despite devm
HID: whitespace cleanup
HID: multitouch: enable Surface 3 Type Cover Pro to report multitouch data
HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock using hid-rmi
HID: rmi: Handle all Synaptics touchpads using hid-rmi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU UPDATES from Joerg Roedel:
- KVM PCIe/MSI passthrough support on ARM/ARM64
- introduction of a core representation for individual hardware iommus
- support for IOMMU privileged mappings as supported by some ARM IOMMUS
- 16-bit SID support for ARM-SMMUv2
- stream table optimization for ARM-SMMUv3
- various fixes and other small improvements
* tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (61 commits)
vfio/type1: Fix error return code in vfio_iommu_type1_attach_group()
iommu: Remove iommu_register_instance interface
iommu/exynos: Make use of iommu_device_register interface
iommu/mediatek: Make use of iommu_device_register interface
iommu/msm: Make use of iommu_device_register interface
iommu/arm-smmu: Make use of the iommu_register interface
iommu: Add iommu_device_set_fwnode() interface
iommu: Make iommu_device_link/unlink take a struct iommu_device
iommu: Add sysfs bindings for struct iommu_device
iommu: Introduce new 'struct iommu_device'
iommu: Rename struct iommu_device
iommu: Rename iommu_get_instance()
iommu: Fix static checker warning in iommu_insert_device_resv_regions
iommu: Avoid unnecessary assignment of dev->iommu_fwspec
iommu/mediatek: Remove bogus 'select' statements
iommu/dma: Remove bogus dma_supported() implementation
iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address space
iommu/vt-d: Don't over-free page table directories
iommu/vt-d: Tylersburg isoch identity map check is done too late.
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"Misc platform updates: SGI UV4 support additions, intel-mid Merrifield
enhancements and purge of old code"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/platform/UV/NMI: Fix uneccessary kABI breakage
x86/platform/UV: Clean up the NMI code to match current coding style
x86/platform/UV: Ensure uv_system_init is called when necessary
x86/platform/UV: Initialize PCH GPP_D_0 NMI Pin to be NMI source
x86/platform/UV: Verify NMI action is valid, default is standard
x86/platform/UV: Add basic CPU NMI health check
x86/platform/UV: Add Support for UV4 Hubless NMIs
x86/platform/UV: Add Support for UV4 Hubless systems
x86/platform/UV: Clean up the UV APIC code
x86/platform/intel-mid: Move watchdog registration to arch_initcall()
x86/platform/intel-mid: Don't shadow error code of mp_map_gsi_to_irq()
x86/platform/intel-mid: Allocate RTC interrupt for Merrifield
x86/ioapic: Return suitable error code in mp_map_gsi_to_irq()
x86/platform/UV: Fix 2 socket config problem
x86/platform/UV: Fix panic with missing UVsystab support
x86/platform/intel-mid: Enable RTC on Intel Merrifield
x86/platform/intel: Remove PMIC GPIO block support
x86/platform/intel-mid: Make intel_scu_device_register() static
x86/platform/intel-mid: Enable GPIO keys on Merrifield
x86/platform/intel-mid: Get rid of duplication of IPC handler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement wraparound-safe refcount_t and kref_t types based on
generic atomic primitives (Peter Zijlstra)
- Improve and fix the ww_mutex code (Nicolai Hähnle)
- Add self-tests to the ww_mutex code (Chris Wilson)
- Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
Bueso)
- Micro-optimize the current-task logic all around the core kernel
(Davidlohr Bueso)
- Tidy up after recent optimizations: remove stale code and APIs,
clean up the code (Waiman Long)
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
fork: Fix task_struct alignment
locking/spinlock/debug: Remove spinlock lockup detection code
lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
lkdtm: Convert to refcount_t testing
kref: Implement 'struct kref' using refcount_t
refcount_t: Introduce a special purpose refcount type
sched/wake_q: Clarify queue reinit comment
sched/wait, rcuwait: Fix typo in comment
locking/mutex: Fix lockdep_assert_held() fail
locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
locking/rwsem: Reinit wake_q after use
locking/rwsem: Remove unnecessary atomic_long_t casts
jump_labels: Move header guard #endif down where it belongs
locking/atomic, kref: Implement kref_put_lock()
locking/ww_mutex: Turn off __must_check for now
locking/atomic, kref: Avoid more abuse
locking/atomic, kref: Use kref_get_unless_zero() more
locking/atomic, kref: Kill kref_sub()
locking/atomic, kref: Add kref_read()
locking/atomic, kref: Add KREF_INIT()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this (fairly busy) cycle were:
- There was a class of scheduler bugs related to forgetting to update
the rq-clock timestamp which can cause weird and hard to debug
problems, so there's a new debug facility for this: which uncovered
a whole lot of bugs which convinced us that we want to keep the
debug facility.
(Peter Zijlstra, Matt Fleming)
- Various cputime related updates: eliminate cputime and use u64
nanoseconds directly, simplify and improve the arch interfaces,
implement delayed accounting more widely, etc. - (Frederic
Weisbecker)
- Move code around for better structure plus cleanups (Ingo Molnar)
- Move IO schedule accounting deeper into the scheduler plus related
changes to improve the situation (Tejun Heo)
- ... plus a round of sched/rt and sched/deadline fixes, plus other
fixes, updats and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (85 commits)
sched/core: Remove unlikely() annotation from sched_move_task()
sched/autogroup: Rename auto_group.[ch] to autogroup.[ch]
sched/topology: Split out scheduler topology code from core.c into topology.c
sched/core: Remove unnecessary #include headers
sched/rq_clock: Consolidate the ordering of the rq_clock methods
delayacct: Include <uapi/linux/taskstats.h>
sched/core: Clean up comments
sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds
sched/clock: Add dummy clear_sched_clock_stable() stub function
sched/cputime: Remove generic asm headers
sched/cputime: Remove unused nsec_to_cputime()
s390, sched/cputime: Remove unused cputime definitions
powerpc, sched/cputime: Remove unused cputime definitions
s390, sched/cputime: Make arch_cpu_idle_time() to return nsecs
ia64, sched/cputime: Remove unused cputime definitions
ia64: Convert vtime to use nsec units directly
ia64, sched/cputime: Move the nsecs based cputime headers to the last arch using it
sched/cputime: Remove jiffies based cputime
sched/cputime, vtime: Return nsecs instead of cputime_t to account
sched/cputime: Complete nsec conversion of tick based accounting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- Assign notifier chain priorities for all RAS related handlers to
make the ordering explicit (Borislav Petkov)
- Improve the AMD MCA banks sysfs output (Yazen Ghannam)
- Various cleanups and restructuring of the x86 RAS code (Borislav
Petkov)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras, EDAC, acpi: Assign MCE notifier handlers a priority
x86/ras: Get rid of mce_process_work()
EDAC/mce/amd: Dump TSC value
EDAC/mce/amd: Unexport amd_decode_mce()
x86/ras/amd/inj: Change dependency
x86/ras: Flip the TSC-adding logic
x86/ras/amd: Make sysfs names of banks more user-friendly
x86/ras/therm_throt: Do not log a fake MCE for thermal events
x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Changes to the EFI init code to establish whether secure boot
authentication was performed at boot time. (Josh Boyer, David
Howells)
- Wire up the UEFI memory attributes table for x86. This eliminates
any runtime memory regions that are both writable and executable,
on recent firmware versions. (Sai Praneeth)
- Move the BGRT init code to an earlier stage so that we can still
use efi_mem_reserve(). (Dave Young)
- Preserve debug symbols in the ARM/arm64 UEFI stub (Ard Biesheuvel)
- Code deduplication work and various other cleanups (Lukas Wunner)
- ... plus various other fixes and cleanups"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Make file I/O chunking x86-specific
efi: Print the secure boot status in x86 setup_arch()
efi: Disable secure boot if shim is in insecure mode
efi: Get and store the secure boot status
efi: Add SHIM and image security database GUID definitions
arm/efi: Allow invocation of arbitrary runtime services
x86/efi: Allow invocation of arbitrary runtime services
efi/libstub: Preserve .debug sections after absolute relocation check
efi/x86: Add debug code to print cooked memmap
efi/x86: Move the EFI BGRT init code to early init code
efi: Use typed function pointers for the runtime services table
efi/esrt: Fix typo in pr_err() message
x86/efi: Add support for EFI_MEMORY_ATTRIBUTES_TABLE
efi: Introduce the EFI_MEM_ATTR bit and set it from the memory attributes table
efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures
x86/efi: Deduplicate efi_char16_printk()
efi: Deduplicate efi_file_size() / _read() / _close()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This update provides:
- Yet another two irq controller chip drivers
- A few updates and fixes for GICV3
- A resource managed function for interrupt allocation
- Fixes, updates and enhancements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom: Fix error handling
genirq: Clarify logic calculating bogus irqreturn_t values
genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg
genirq/devres: Use dev_name(dev) as default for devname
genirq: Fix /proc/interrupts output alignment
irqdesc: Add a resource managed version of irq_alloc_descs()
irqchip/gic-v3-its: Zero command on allocation
irqchip/gic-v3-its: Fix command buffer allocation
irqchip/mips-gic: Fix local interrupts
irqchip: Add a driver for Cortina Gemini
irqchip: DT bindings for Cortina Gemini irqchip
irqchip/gic-v3: Remove duplicate definition of GICD_TYPER_LPIS
irqchip/gic-v3-its: Rename MAPVI to MAPTI
irqchip/gic-v3-its: Drop deprecated GITS_BASER_TYPE_CPU
irqchip/gic-v3-its: Refactor command encoding
irqchip/gic-v3-its: Enable cacheable attribute Read-allocate hints
irqchip/qcom: Add IRQ combiner driver
ACPI: Add support for ResourceSource/IRQ domain mapping
ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan
irq/platform-msi: Fix comment about maximal MSIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Nothing exciting, just the usual pile of fixes, updates and cleanups:
- A bunch of clocksource driver updates
- Removal of CONFIG_TIMER_STATS and the related /proc file
- More posix timer slim down work
- A scalability enhancement in the tick broadcast code
- Math cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
hrtimer: Catch invalid clockids again
math64, tile: Fix build failure
clocksource/drivers/arm_arch_timer:: Mark cyclecounter __ro_after_init
timerfd: Protect the might cancel mechanism proper
timer_list: Remove useless cast when printing
time: Remove CONFIG_TIMER_STATS
clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101
clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
clocksource/drivers/arm_arch_timer: Remove fsl-a008585 parameter
clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-161010101 erratum
clocksource/drivers/ostm: Add renesas-ostm timer driver
clocksource/drivers/ostm: Document renesas-ostm timer DT bindings
clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock
clocksource/drivers/gemini: Add driver for the Cortina Gemini
clocksource: add DT bindings for Cortina Gemini
clockevents: Add a clkevt-of mechanism like clksrc-of
tick/broadcast: Reduce lock cacheline contention
timers: Omit POSIX timer stuff from task_struct when disabled
x86/timer: Make delay() work during early bootup
delay: Add explanation of udelay() inaccuracy
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New drivers:
- sbs-charger driver
- max14656_charger_detector
- axp20x_ac_power
New chip/feature support"
- axp20x_usb_power: add AXP223 support
- tps65217: add usb charger support
- qcom_smbb: support otg regulator
- at91-reset: add samx7 support
Dropped drivers:
- intel_mid_battery (platform was dropped)
Fixes:
- at91-poweroff: avoid wearing off LPDDR memory
- replace deprecated extcon API
- lots of cleanup and style fixes
- misc minor functionality fixes"
* tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits)
power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
power: supply: axp20x_usb_power: use IIO channels when available
power: supply: max14656: Export I2C and OF device ID as module aliases
power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
power: supply: bq24190_charger: Adjust formatting
power: supply: bq24190_charger: Handle fault before status on interrupt
power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()
power: supply: bq24190_charger: Call power_supply_changed() for relevant component
power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()
power: supply: bq24190_charger: Call set_mode_host() on pm_resume()
power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING
power: supply: qcom_smbb: add regulator dependency
power: reset: at91-reset: remove leftover platform_device_id
power: reset: at91-reset: add samx7 support
power: supply: max14656: fix platform_no_drv_owner.cocci warnings
power: supply: pcf50633-charger: Compress return logic into one line.
power: supply: ab8500_btemp: Compress return logic into one line.
power: reset: at91-poweroff: timely shutdown LPDDR memories
ARM: at91: define LPDDR types
...
|
|
Pull EDAC updates from Borislav Petkov:
- Make amd64_edac still load on a machine with unpopulated nodes +
cleanups (Yazen Ghannam)
- Expose per-DIMM error counts in sysfs (Aaron Miller)
- Add T2080 l2-cache support to mpc85xx (Chris Packham)
- Random other small improvements/cleanups/fixlets
* tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, mce_amd: Print IPID and Syndrome on a separate line
EDAC, amd64: Bump driver version
MAINTAINERS, EDAC: Update email for Thor Thayer
EDAC, fsl_ddr: Make locally used symbols static
EDAC, mpc85xx: Add T2080 l2-cache support
EDAC, amd64: Add x86cpuid sanity check during init
EDAC, amd64: Don't treat ECC disabled as failure
EDAC: Add routine to check if MC devices list is empty
EDAC, amd64: Remove unused printing macros
EDAC, amd64: Rework messages in ecc_enabled()
EDAC, amd64: Move global code out of instance functions
EDAC, amd64: Free unused memory when init_one_instance() fails
EDAC, mce_amd: Give more context to deferred error message
EDAC, i7300: Test for the second channel properly
EDAC, sb_edac: Get rid of ->show_interleave_mode()
EDAC: Expose per-DIMM error counts in sysfs
EDAC, amd64: Save and return err code from probe_one_instance()
EDAC, i82975x: Add ioremap_nocache() error handling
EDAC: Fix typos in enum mem_type comments
EDAC: Make dev_attr_sdram_scrub_rate static
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- new driver for stts751
- it87: Added support for IT8622E and IT8792E; improved support for
other chips
- lm70: Added support for TMP122/124
- use permission-specific DEVICE_ATTR variants where possible
- fixed overflows in various drivers
- minor improvements in various drivers
* tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (95 commits)
hwmon: (sht15) Add device tree support
devicetree: add lm90 thermal_zone sensor support
hwmon: (it87) Add support for IT8792E
hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers
hwmon: (it87) Fix pwm4 detection for IT8620 and IT8628
hwmon: (it87) Ensure that pwm control cache is current before updating values
hwmon: (it87) Improve IT8622 support
hwmon: (it87) Add support for IT8622E
hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5V
DT: add binding documentation for STTS751
hwmon: new driver for ST stts751 thermal sensor
hwmon: Register thermal zone only if 'dev' parameter was provided
hwmon: Relax name attribute validation for new APIs
hwmon: Update documentation to clarify rules for the 'name' attribute
hwmon: Make name attribute mandatory for new APIs
hwmon: (lm70) Add support for TI TMP122/124
hwmon: (lm70) Utilize dev_warn instead of pr_warn
hwmon: (ltc4151) Export OF device ID table as module aliases
hwmon: (adc128d818) Preserve operation mode
hwmon: (adc128d818) Support operation modes 1-3
...
|
|
Pull MTD updates from Brian Norris:
"MTD updates for 4.11:
General:
- new kernel API for retrieving max bad blocks per die (not used yet)
- track (and expose via sysfs) a partition's device tree node
- support a "label" device tree property for naming an MTD
NAND:
- sunxi: avoid busy-waiting for NAND events
- ifc: fix ECC handling on IFC v1.0
- OX820: add explicit dependency on ARCH_OXNAS in Kconfig
- core: add a new manufacture ID and fix a kernel-doc warning
- fsmc: kill pdata support
- lpc32xx_slc: remove unneeded NULL check
- support dynamic "max bad blocks" detection via ONFI
SPI NOR:
- add support for the 4-byte address instruction set
- add support for new memory parts
- add support to S3AN memories
- add support to the Intel SPI controller
- add support to the Aspeed AST2400 and AST2550 controllers
- support max SPI message sizes in m25p80_read()
- fixes for the Candence and Freescale QSPI drivers
Other:
- add support for Gemini flash probing
- bcm47xxsflash: add support for reading outside memory-mapped window
- bcm47xxparts: extend to support multiple TRX partitions
- misc fixes and typos
Extra note: we've pulled in an MFD subtree from Lee Jones as a
dependency for a new Intel SPI NOR driver"
[ Kudos to Brian for sending pull request a week early:
"I refuse to acknowledge the existence of 4.10-rc8 and am therefore
sending our MTD changes for 4.11 now"
which is all good ]
* tag 'for-linus-20170212' of git://git.infradead.org/linux-mtd: (52 commits)
mtd: aspeed: remove redundant dev_err call in aspeed_smc_probe()
dt-bindings: mtd: add a common label property to all mtd devices
mtd: name the mtd device with an optional label property
mtd: physmap_of: fixup gemini/versatile dependencies
mtd: spi-nor: cqspi: remove redundant dead code on error return check
Documentation: mtk-quadspi: update DT bindings
mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ
mtd:fsl-quadspi:use the property fields of SPI-NOR
mtd: spi-nor: Add support for gd25q16
mtd: spi-nor: Fix S3AN addressing calculation
mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()
mtd: spi-nor: add dt support for Everspin MRAMs
mtd: spi-nor: Add lock/unlock support for f25l32pa
mtd: spi-nor: add a stateless method to support memory size above 128Mib
mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
mtd: m25p80: consider max message size in m25p80_read
mtd: spi-nor: bindings for the Aspeed memory controllers
mtd: aspeed: add memory controllers for the Aspeed AST2400 SoC
mtd: spi-nor: add memory controllers for the Aspeed AST2500 SoC
mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write()
...
|
|
'for-4.11/mayflash', 'for-4.11/microsoft', 'for-4.11/rmi', 'for-4.11/upstream' and 'for-4.11/wacom' into for-linus
|
|
What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len. Or with ->dxferp pointing
to an array full of empty iovecs.
Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...
Found by Dmitry Vyukov and syzkaller.
[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
underlying issue. - Linus ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.
Found by Dmitry Vyukov and syzkaller.
[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
might still be a cause of excessive log spamming.
NOTE! If this warning ever triggers, we may end up leaking resources,
since this doesn't bother to try to clean the command up. So this
WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
much worse.
People really need to stop using BUG_ON() for "this shouldn't ever
happen". It makes pretty much any bug worse. - Linus ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'devm_ioremap()' returns NULL on error, not an error pointer.
Fixes: f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: marc.zyngier@arm.com
Cc: kernel-janitors@vger.kernel.org
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/20170218083434.2289-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Two more bugfixes that came in during this week:
- a defconfig change to enable a vital driver used on some Qualcomm
based phones. This was already queued for 4.11, but the maintainer
asked to have it in 4.10 after all.
- a regression fix for the reset controller framework, this got
broken by a typo in the 4.10 merge window"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: multi_v7_defconfig: enable Qualcomm RPMCC
reset: fix shared reset triggered_count decrement on error
|
|
Pull networking fixes from David Miller:
1) Fix leak in dpaa_eth error paths, from Dan Carpenter.
2) Use after free when using IPV6_RECVPKTINFO, from Andrey Konovalov.
3) fanout_release() cannot be invoked from atomic contexts, from Anoob
Soman.
4) Fix bogus attempt at lockdep annotation in IRDA.
5) dev_fill_metadata_dst() can OOP on a NULL dst cache pointer, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
irda: Fix lockdep annotations in hashbin_delete().
vxlan: fix oops in dev_fill_metadata_dst
dccp: fix freeing skb too early for IPV6_RECVPKTINFO
dpaa_eth: small leak on error
packet: Do not call fanout_release from atomic contexts
|
|
Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device")
vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL
dst_cache pointer, so the latter should explicitly check for
valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add
dst_cache to ovs vxlan lwtunnel") removed said check.
As a result is possible to trigger a null pointer access calling
vxlan_fill_metadata_dst(), e.g. with:
ovs-vsctl add-br ovs-br0
ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \
type=vxlan options:remote_ip=192.168.1.1 \
options:key=1234 options:dst_port=4789 ofport_request=10
ip address add dev ovs-br0 172.16.1.2/24
ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \
targets=\"172.16.1.1:1234\" sampling=1
iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234
This commit addresses the issue passing to vxlan_get_route() the
dst_cache already available into the lwt info processed by
vxlan_fill_metadata_dst().
Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
"Just a single change to Elan touchpad driver to recognize a new ACPI
ID"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add ELAN0605 to the ACPI table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"I2C has a revert to fix a regression"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: designware: detect when dynamic tar update is possible"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"Fix multi-bit bus width without high-speed mode for MMC"
* tag 'mmc-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: fix multi-bit bus width without high-speed mode
|
|
Pull NTB bugfixes frfom Jon Mason:
"NTB bug fixes to address a crash when unloading the ntb module, a DMA
engine unmap leak, allowing the proper queue choice, and clearing the
SKX irq bit"
* tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntb:
ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly
ntb_transport: Pick an unused queue
ntb: ntb_perf missing dmaengine_unmap_put
NTB: ntb_transport: fix debugfs_remove_recursive
|
|
This should be >= instead of > here. It means that we don't increment
the free count enough so it becomes off by one.
Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
into fixes
Pull "Reset controller fixes for v4.10" from Philipp Zabel:
- Remove erroneous negation of the error check of the reset function
to decrement trigger_count in the error case, not on success. This
fixes shared resets to actually only trigger once, as intended.
* tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux:
reset: fix shared reset triggered_count decrement on error
|
|
For a shared reset, when the reset is successful, the triggered_count is
incremented when trying to call the reset callback, so that another device
sharing the same reset line won't trigger it again. If the reset has not
been triggered successfully, the trigger_count should be decremented.
The code does the opposite, and decrements the trigger_count on success.
As a consequence, another device sharing the reset will be able to trigger
it again.
Fixed be removing negation in from of the error code of the reset function.
Fixes: 7da33a37b48f ("reset: allow using reset_control_reset with shared reset")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
On Skylake hardware, the link_poll isn't clearing the pending interrupt
bit. Adding a new function for SKX that handles clearing of status bit the
right way.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.
Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
In the normal I/O execution path, ntb_perf is missing a call to
dmaengine_unmap_put() after submission. That causes us to leak
unmap objects.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level
directory must not be later than
debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory.
Otherwise, the sub-level directory will not exist, and it would be
invalid (panic) to attempt to remove it. This removes the top-level
directory last, after sub-level directories have been cleaned up.
Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just two last minute fixes, one for DP MST oopses and one for a radeon
regression"
* tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
drm/dp/mst: fix kernel oops when turning off secondary monitor
|
|
into drm-fixes
One regression fix for interlaced modes on radeon
* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"A regression fix that makes the Siano driver to work again after the
CONFIG_VMAP_STACK change"
* tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] siano: make it work again with CONFIG_VMAP_STACK
|
