| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
|
|
The cpuidle ->enter method expects the return value to be the sleep
state we entered. Returning negative numbers or other codes is not
permissible since coupled CPU idle was merged.
At least some of the mvebu_v7_cpu_suspend() implementations return the
value from cpu_suspend(), which returns zero if the CPU vectors back
into the kernel via cpu_resume() (the success case), or the non-zero
return value of the suspend actor, or one (failure cases).
We do not want to be returning the failure case value back to CPU idle
as that indicates that we successfully entered one of the deeper idle
states. Always return zero instead, indicating that we slept for the
shortest amount of time.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Add basic support for rate-matching 10G PHYs for mv88e6xxx - if we are
in RXAUI, XAUI or 10GBASE-R mode, the link speed is 10G, even if the
media is running at a slower speed.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
This reverts commit c56a71a92114e3198e249593841cb744abaadcb7.
|
|
This is the problem with out-of-tree maintained patches; they break,
sometimes requiring substantial rework. It's all very well promising
to publish new versions as that happens, but it causes pain when they
aren't published in a timely manner. Hence this hack.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add a debugfs directory named mv88e6xxx.X where X is the DSA switch
index. Mount the debugfs file system with:
# mount -t debugfs none /sys/kernel/debug
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
[Modified by rmk for current kernels.]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Split out the code handling the GMAC from the rest of the driver. This
block appears to be shared amongst several revisions of the IP.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
An initial stab at converting mvneta to PCS operations. There's a few
FIXMEs to be solved.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Move the 1ms clock control out of mac_config() into mac_prepare() and
mac_finish(), which simplifies the mac_config() code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Convert mvneta to use the mac_prepare() and mac_finish() methods in
preparation to converting mvneta to split-PCS support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Program the 1ms autonegotiation clock divisor according to the clocking
rate of neta - without this, the 1ms clock ticks at about 660us on
Armada 38x configured for 250MHz. Bring this into correct specification.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Further augmentation of the comphy setup.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The implementation appears not to support pause modes on anything
but RGMII, RGMII_TXID, MII and REVMII interface modes. Let phylink
know that detail.
(This may not be correct; particularly see the FIXMEs in this patch.)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Use the phy interface mode bitmaps for SFP modules and PHYs to select
the operating interface for SFPs and PHYs with SFPs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Select the host interface configuration according to the capabilities
of the host; this allows the kernel to support SFP modules using the
88x3310.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Pass the supported PHY interface types to phylib so that PHY drivers
can select an appropriate host configuration mode for their interface
according to the host capabilities.
This is only done for SFP modules presently.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Fill in the phy interface mode bitmap for the Marvell mvpp2 driver, so
phylink can know which interfaces are supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Fill in the phy interface mode bitmap for the Marvell mvneta driver, so
phylink can know which interfaces are supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Where a MAC provides the PHY interface mode capabilities, use the PHY
interface mode bitmaps to select the operating interface mode for
optical SFP modules, rather than using the linkmode bitmaps.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add parsing the SFP EEPROM to supported phy interface modes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
DSA assumes that a bridge which has vlan filtering disabled is not
vlan aware, and ignores all vlan configuration. However, the kernel
software bridge code allows configuration in this state.
This causes the kernel's idea of the bridge vlan state and the
hardware state to disagree, so "bridge vlan show" indicates a correct
configuration but the hardware lacks all configuration. Even worse,
enabling vlan filtering on a DSA bridge immediately blocks all traffic
which, given the output of "bridge vlan show", is very confusing.
Provide an option that drivers can set to indicate they want to receive
vlan configuration even when vlan filtering is disabled. This is safe
for Marvell DSA bridges, which do not look up ingress traffic in the
VTU if the port is in 8021Q disabled state. Whether this change is
suitable for all DSA bridges is not known.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Display SFP module information verbosely, splitting the generic parts
into a separate file.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Add a compatible for SFP+ cages. SFP+ cages are backwards compatible,
but the ethernet device behind them may not support the slower speeds
of SFP modules.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add debugfs support to SFP so that the internal state of the SFP state
machines and hardware signal state can be viewed from userspace, rather
than having to compile a debug kernel to view state state transitions
in the kernel log. The 'state' output looks like:
Module state: empty
Module probe attempts: 0 0
Device state: up
Main state: down
Fault recovery remaining retries: 5
PHY probe remaining retries: 12
moddef0: 0
rx_los: 1
tx_fault: 1
tx_disable: 1
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Cooled SFP+ transceivers need a longer initialisation (startup) time.
Select the initialisation time depending on the cooled option bit.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
phy_error() is called from phy_interrupt() or phy_state_machine(), and
uses WARN_ON() to print a backtrace. The backtrace is not useful when
reporting a PHY error.
However, a system may contain multiple ethernet PHYs, and phy_error()
gives no clue which one caused the problem.
Replace WARN_ON() with a call to phydev_err() so that we can see which
PHY had an error, and also inform the user that we are halting the PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Allow the PHY to probe when there is no firmware, but do not allow the
link to come up by forcing the PHY state to PHY_HALTED in a similar way
to phy_error().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Provide phy driver start/stop hooks so that the PHY driver knows when
the network driver is starting or stopping. This will be used for the
Marvell 10G driver so that we can sanely refuse to start if the PHYs
firmware is not present, and also so that we can sanely support SFPs
behind the PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Support reporting the hardware resolved pause enablement states via
phylib, overriding our software implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Allow phylib drivers to pass the hardware-resolved pause state to MAC
drivers, rather than using the software-based pause resolution code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add support for configuring the LEDs. Macchiatobin has an oddity in
that the left LED goes out when the cable is connected, and flashes
when there's link activity. This is because the reset default for
the LED outputs assume that the LED is connected to supply, not to
ground. Add support for configuring the LED modes and polarities.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Add support for the downshift tunable for the Marvell 88x3310 PHY.
Downshift is only usable with firmware 0.3.5.0 and later.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
There are several places which open code comparing PHY IDs. Provide a
couple of helpers to assist with this, using a slightly simpler test
than the original:
- phy_id_compare() compares two arbitary PHY IDs and a mask of the
significant bits in the ID.
- phydev_id_compare() compares the bound phydev with the specified
PHY ID, using the bound driver's mask.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The at803x driver contains a function, at803x_match_phy_id(), which
tests whether the PHY ID matches the value passed, comparing phy_id
with phydev->phy_id and testing all bits that have a "one" in the
mask, phydev->drv->phy_id_mask.
This is the same test that is used to match the driver, with phy_id
replaced with the driver specified ID, phydev->drv->phy_id.
Hence, we already know the value of the bits being tested if we look
at phydev->drv->phy_id directly, and we do not require a complicated
test to check them. Test directly against phydev->drv->phy_id instead.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
If we intend to use PCS operations, mac_pcs_get_state() will not be
implemented, so will be NULL. If we also intend to register the PCS
operations in mac_prepare() or mac_config(), then this leads to an
attempt to call NULL function pointer during phylink_start(). Avoid
this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
The SGMII PCS PHY needs to be updated with the link configuration in
the mac_link_up() call rather than in mac_config(). However,
mtk_sgmii_setup_mode_force() programs the SGMII block during
mac_config() when using 802.3z interface modes with the link
configuration.
Split that functionality from mtk_sgmii_setup_mode_force(), moving it
to a new mtk_sgmii_link_up() function, and call it from mac_link_up().
This does not look correct to me: 802.3z modes operate at a fixed
speed. The contents of mtk_sgmii_link_up() look more appropriate for
SGMII mode, but the original code definitely did not call
mtk_sgmii_setup_mode_force() for SGMII mode but only 802.3z mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some more driver bugfixes for I2C. Including a revert - the updated
series for it will come during the next merge window"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: owl: Clear NACK and BUS error bits
Revert "i2c: imx: Fix reset of I2SR_IAL flag"
i2c: meson: fixup rate calculation with filter delay
i2c: meson: keep peripheral clock enabled
i2c: meson: fix clock setting overwrite
i2c: imx: Fix reset of I2SR_IAL flag
|
|
When the NACK and BUS error bits are set by the hardware, the driver is
responsible for clearing them by writing "1" into the corresponding
status registers.
Hence perform the necessary operations in owl_i2c_interrupt().
Fixes: d211e62af466 ("i2c: Add Actions Semiconductor Owl family S900 I2C driver")
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
This reverts commit fa4d30556883f2eaab425b88ba9904865a4d00f3. An updated
version was sent. So, revert this version and give the new version more
time for testing.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One last minute fix for v5.9 which has been causing crashes in test
systems with the fsl-dspi driver when they hit deferred probe (and
which I probably let cook in next a bit longer than is ideal).
And an update to MAINTAINERS reflecting Serge's extensive and
detailed recent work on the DesignWare driver"
* tag 'spi-fix-v5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
MAINTAINERS: Add maintainer of DW APB SSI driver
spi: fsl-dspi: fix NULL pointer dereference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fix from Sebastian Reichel:
"Just a single change to revert enablement of packet error checking for
battery data on Chromebooks, since some of their embedded controllers
do not handle it correctly"
* tag 'for-v5.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: sbs-battery: chromebook workaround for PEC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some late fixes: one IRQ issue and one compilation issue for UML.
- Fix a compilation issue with User Mode Linux
- Handle spurious interrupts properly in the PCA953x driver"
* tag 'gpio-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Survive spurious interrupts
gpiolib: Disable compat ->read() code in UML case
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"Assign a proper discard granularity rather than incorrectly set it to
zero"
* tag 'mmc-v5.9-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: don't set limits.discard_granularity as 0
|
