summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-11-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
2017-11-16Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "Most of the commits are for defconfig changes, to enable newly added drivers or features that people have started using. For the changed lines lines, we have mostly cleanups, the affected platforms are OMAP, Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions. The largest single change is the introduction of the TI "sysc" bus driver, with the intention of cleaning up more legacy code. Two new SoC platforms get added this time: - Allwinner R40 is a modernized version of the A20 chip, now with a Quad-Core ARM Cortex-A7. According to the manufacturer, it is intended for "Smart Hardware" - Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of chips meant for managed gigabit ethernet switches, based around a Cortex-A9 CPU. Finally, we gain SMP support for two platforms: Renesas R-Car E2 and Amlogic Meson8/8b, which were previously added but only supported uniprocessor operation" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits) ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER arm64: defconfig: enable CONFIG_GPIO_UNIPHIER ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b ARM: meson: Add SMP bringup code for Meson8 and Meson8b ARM: smp_scu: allow the platform code to read the SCU CPU status ARM: smp_scu: add a helper for powering on a specific CPU dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init() ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init() ARM: defconfig: select the right SX150X driver arm64: defconfig: Enable QCOM_IOMMU arm64: Add ThunderX drivers to defconfig arm64: defconfig: Enable Tegra PCI controller cpufreq: imx6q: Move speed grading check to cpufreq driver arm64: defconfig: re-enable Qualcomm DB410c USB ARM: configs: stm32: Add MDMA support in STM32 defconfig ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1 bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove bus: ti-sysc: mark PM functions as __maybe_unused ...
2017-11-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "Fixes in qemu, vhost and virtio" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: fw_cfg: fix the command line module name vhost/vsock: fix uninitialized vhost_vsock->guest_cid vhost: fix end of range for access_ok vhost/scsi: Use safe iteration in vhost_scsi_complete_cmd_work() virtio_balloon: fix deadlock on OOM
2017-11-16Merge tag 'for-linus-4.15-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Xen features and fixes for v4.15-rc1 Apart from several small fixes it contains the following features: - a series by Joao Martins to add vdso support of the pv clock interface - a series by Juergen Gross to add support for Xen pv guests to be able to run on 5 level paging hosts - a series by Stefano Stabellini adding the Xen pvcalls frontend driver using a paravirtualized socket interface" * tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits) xen/pvcalls: fix potential endless loop in pvcalls-front.c xen/pvcalls: Add MODULE_LICENSE() MAINTAINERS: xen, kvm: track pvclock-abi.h changes x86/xen/time: setup vcpu 0 time info page x86/xen/time: set pvclock flags on xen_time_init() x86/pvclock: add setter for pvclock_pvti_cpu0_va ptp_kvm: probe for kvm guest availability xen/privcmd: remove unused variable pageidx xen: select grant interface version xen: update arch/x86/include/asm/xen/cpuid.h xen: add grant interface version dependent constants to gnttab_ops xen: limit grant v2 interface to the v1 functionality xen: re-introduce support for grant v2 interface xen: support priv-mapping in an HVM tools domain xen/pvcalls: remove redundant check for irq >= 0 xen/pvcalls: fix unsigned less than zero error check xen/time: Return -ENODEV from xen_get_wallclock() xen/pvcalls-front: mark expected switch fall-through xen: xenbus_probe_frontend: mark expected switch fall-throughs xen/time: do not decrease steal time after live migration on xen ...
2017-11-16Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Radim Krčmář: "First batch of KVM changes for 4.15 Common: - Python 3 support in kvm_stat - Accounting of slabs to kmemcg ARM: - Optimized arch timer handling for KVM/ARM - Improvements to the VGIC ITS code and introduction of an ITS reset ioctl - Unification of the 32-bit fault injection logic - More exact external abort matching logic PPC: - Support for running hashed page table (HPT) MMU mode on a host that is using the radix MMU mode; single threaded mode on POWER 9 is added as a pre-requisite - Resolution of merge conflicts with the last second 4.14 HPT fixes - Fixes and cleanups s390: - Some initial preparation patches for exitless interrupts and crypto - New capability for AIS migration - Fixes x86: - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and after-reset state - Refined dependencies for VMX features - Fixes for nested SMI injection - A lot of cleanups" * tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits) KVM: s390: provide a capability for AIS state migration KVM: s390: clear_io_irq() requests are not expected for adapter interrupts KVM: s390: abstract conversion between isc and enum irq_types KVM: s390: vsie: use common code functions for pinning KVM: s390: SIE considerations for AP Queue virtualization KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup KVM: PPC: Book3S HV: Cosmetic post-merge cleanups KVM: arm/arm64: fix the incompatible matching for external abort KVM: arm/arm64: Unify 32bit fault injection KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared KVM: arm/arm64: vgic-its: New helper functions to free the caches KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device arm/arm64: KVM: Load the timer state when enabling the timer KVM: arm/arm64: Rework kvm_timer_should_fire KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit KVM: arm/arm64: Move phys_timer_emulate function KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps ...
2017-11-16Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - add support for ELF fdpic binaries on both MMU and noMMU platforms - linker script cleanups - support for compressed .data section for XIP images - discard memblock arrays when possible - various cleanups - atomic DMA pool updates - better diagnostics of missing/corrupt device tree - export information to allow userspace kexec tool to place images more inteligently, so that the device tree isn't overwritten by the booting kernel - make early_printk more efficient on semihosted systems - noMMU cleanups - SA1111 PCMCIA update in preparation for further cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits) ARM: 8719/1: NOMMU: work around maybe-uninitialized warning ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" ARM: 8713/1: NOMMU: Support MPU in XIP configuration ARM: 8712/1: NOMMU: Use more MPU regions to cover memory ARM: 8711/1: V7M: Add support for MPU to M-class ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE ARM: 8709/1: NOMMU: Disallow MPU for XIP ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers ARM: 8706/1: NOMMU: Move out MPU setup in separate module ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel() ARM: 8705/1: early_printk: use printascii() rather than printch() ARM: 8703/1: debug.S: move hexbuf to a writable section ARM: add additional table to compressed kernel ARM: decompressor: fix BSS size calculation pcmcia: sa1111: remove special sa1111 mmio accessors pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources ARM: better diagnostics with missing/corrupt dtb ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size() ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init ..
2017-11-16Merge tag 'powerpc-4.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A bit of a small release, I suspect in part due to me travelling for KS. But my backlog of patches to review is smaller than usual, so I think in part folks just didn't send as much this cycle. Non-highlights: - Five fixes for the >128T address space handling, both to fix bugs in our implementation and to bring the semantics exactly into line with x86. Highlights: - Support for a new OPAL call on bare metal machines which gives us a true NMI (ie. is not masked by MSR[EE]=0) for debugging etc. - Support for Power9 DD2 in the CXL driver. - Improvements to machine check handling so that uncorrectable errors can be reported into the generic memory_failure() machinery. - Some fixes and improvements for VPHN, which is used under PowerVM to notify the Linux partition of topology changes. - Plumbing to enable TM (transactional memory) without suspend on some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND). - Support for emulating vector loads form cache-inhibited memory, on some Power9 revisions. - Disable the fast-endian switch "syscall" by default (behind a CONFIG), we believe it has never had any users. - A major rework of the API drivers use when initiating and waiting for long running operations performed by OPAL firmware, and changes to the powernv_flash driver to use the new API. - Several fixes for the handling of FP/VMX/VSX while processes are using transactional memory. - Optimisations of TLB range flushes when using the radix MMU on Power9. - Improvements to the VAS facility used to access coprocessors on Power9, and related improvements to the way the NX crypto driver handles requests. - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit. Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A. Kennington III" * tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits) powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature powerpc/64s: Fix masking of SRR1 bits on instruction fault powerpc/64s: mm_context.addr_limit is only used on hash powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary powerpc/64s/hash: Fix fork() with 512TB process address space powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Fix 512T hint detection to use >= 128T powerpc: Fix DABR match on hash based systems powerpc/signal: Properly handle return value from uprobe_deny_signal() powerpc/fadump: use kstrtoint to handle sysfs store powerpc/lib: Implement UACCESS_FLUSHCACHE API powerpc/lib: Implement PMEM API powerpc/powernv/npu: Don't explicitly flush nmmu tlb powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm() powerpc/powernv/idle: Round up latency and residency values powerpc/kprobes: refactor kprobe_lookup_name for safer string operations powerpc/kprobes: Blacklist emulate_update_regs() from kprobes powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace powerpc/kprobes: Disable preemption before invoking probe handler for optprobes ...
2017-11-16Merge tag 'afs-next-20171113' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS updates from David Howells: "kAFS filesystem driver overhaul. The major points of the overhaul are: (1) Preliminary groundwork is laid for supporting network-namespacing of kAFS. The remainder of the namespacing work requires some way to pass namespace information to submounts triggered by an automount. This requires something like the mount overhaul that's in progress. (2) sockaddr_rxrpc is used in preference to in_addr for holding addresses internally and add support for talking to the YFS VL server. With this, kAFS can do everything over IPv6 as well as IPv4 if it's talking to servers that support it. (3) Callback handling is overhauled to be generally passive rather than active. 'Callbacks' are promises by the server to tell us about data and metadata changes. Callbacks are now checked when we next touch an inode rather than actively going and looking for it where possible. (4) File access permit caching is overhauled to store the caching information per-inode rather than per-directory, shared over subordinate files. Whilst older AFS servers only allow ACLs on directories (shared to the files in that directory), newer AFS servers break that restriction. To improve memory usage and to make it easier to do mass-key removal, permit combinations are cached and shared. (5) Cell database management is overhauled to allow lighter locks to be used and to make cell records autonomous state machines that look after getting their own DNS records and cleaning themselves up, in particular preventing races in acquiring and relinquishing the fscache token for the cell. (6) Volume caching is overhauled. The afs_vlocation record is got rid of to simplify things and the superblock is now keyed on the cell and the numeric volume ID only. The volume record is tied to a superblock and normal superblock management is used to mediate the lifetime of the volume fscache token. (7) File server record caching is overhauled to make server records independent of cells and volumes. A server can be in multiple cells (in such a case, the administrator must make sure that the VL services for all cells correctly reflect the volumes shared between those cells). Server records are now indexed using the UUID of the server rather than the address since a server can have multiple addresses. (8) File server rotation is overhauled to handle VMOVED, VBUSY (and similar), VOFFLINE and VNOVOL indications and to handle rotation both of servers and addresses of those servers. The rotation will also wait and retry if the server says it is busy. (9) Data writeback is overhauled. Each inode no longer stores a list of modified sections tagged with the key that authorised it in favour of noting the modified region of a page in page->private and storing a list of keys that made modifications in the inode. This simplifies things and allows other keys to be used to actually write to the server if a key that made a modification becomes useless. (10) Writable mmap() is implemented. This allows a kernel to be build entirely on AFS. Note that Pre AFS-3.4 servers are no longer supported, though this can be added back if necessary (AFS-3.4 was released in 1998)" * tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (35 commits) afs: Protect call->state changes against signals afs: Trace page dirty/clean afs: Implement shared-writeable mmap afs: Get rid of the afs_writeback record afs: Introduce a file-private data record afs: Use a dynamic port if 7001 is in use afs: Fix directory read/modify race afs: Trace the sending of pages afs: Trace the initiation and completion of client calls afs: Fix documentation on # vs % prefix in mount source specification afs: Fix total-length calculation for multiple-page send afs: Only progress call state at end of Tx phase from rxrpc callback afs: Make use of the YFS service upgrade to fully support IPv6 afs: Overhaul volume and server record caching and fileserver rotation afs: Move server rotation code into its own file afs: Add an address list concept afs: Overhaul cell database management afs: Overhaul permit caching afs: Overhaul the callback handling afs: Rename struct afs_call server member to cm_server ...
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-16Merge tag 'backlight-next-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: - handle 32bit overflow in pwm_bl - remove redundant code/checks in tps65217_bl and ili922x * tag 'backlight-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: ili922x: Remove redundant variable len backlight: tps65217_bl: Remove unnecessary default brightness check backlight: pwm_bl: Fix overflow condition
2017-11-16Merge tag 'mfd-next-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New drivers: - Add support for Cherry Trail Dollar Cove TI PMIC - Add support for Add Spreadtrum SC27xx series PMICs New device support: - Add support Regulator to axp20x New functionality: - Add DT support; aspeed-scu sc27xx-pmic - Add power saving support; rts5249 Fix-ups: - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218 - Staticise/constify; stw481x - Use new succinct IRQ API; fsl-imx25-tsadc - Kconfig fix-ups; MFD_TPS65218 - Identify SPI method; lpc_ich - Use managed resources (devm_*) calls; ssbi - Remove unused/obsolete code/documentation; mc13xxx Bug fixes: - Fix typo in MAINTAINERS - Fix error handling; mxs-lradc - Clean-up IRQs on .remove; fsl-imx25-tsadc" * tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits) dt-bindings: mfd: mc13xxx: Remove obsolete property mfd: axp20x: Add axp20x-regulator cell for AXP813 mfd: Add Spreadtrum SC27xx series PMICs driver dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation mfd: ssbi: Use devm_of_platform_populate() mfd: fsl-imx25: Clean up irq settings during removal mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method mfd: tps65218: Introduce dependency on CONFIG_OF mfd: tps65218: Correct the config description MAINTAINERS: Fix Dialog search term for watchdog binding file mfd: fsl-imx25: Set irq handler and data in one go mfd: rts5249: Add support for RTS5250S power saving ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC mfd: Add support for Cherry Trail Dollar Cove TI PMIC syscon: dt-bindings: Add binding document for iProc MHB block syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU mfd: max77693: Add muic of_compatible in mfd_cell mfd: stw481x: Make three arrays static const, reduces object code size mfd: tps65217: Introduce dependency on CONFIG_OF ...
2017-11-16Merge tag 'char-misc-4.15-rc1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-16Merge tag 'driver-core-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core / debugfs patches for 4.15-rc1. Not many here, mostly all are debugfs fixes to resolve some long-reported problems with files going away with references to them in userspace. There's also some SPDX cleanups for the debugfs code, as well as a few other minor driver core changes for issues reported by people. All of these have been in linux-next for a week or more with no reported issues" * tag 'driver-core-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Fix device link deferred probe debugfs: Remove redundant license text debugfs: add SPDX identifiers to all debugfs files debugfs: defer debugfs_fsdata allocation to first usage debugfs: call debugfs_real_fops() only after debugfs_file_get() debugfs: purge obsolete SRCU based removal protection IB/hfi1: convert to debugfs_file_get() and -put() debugfs: convert to debugfs_file_get() and -put() debugfs: debugfs_real_fops(): drop __must_hold sparse annotation debugfs: implement per-file removal protection debugfs: add support for more elaborate ->d_fsdata driver core: Move device_links_purge() after bus_remove_device() arch_topology: Fix section miss match warning due to free_raw_capacity() driver-core: pr_err() strings should end with newlines
2017-11-15Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.15. Core: - Atomic object lifetime fixes - Atomic iterator improvements - Sparse/smatch fixes - Legacy kms ioctls to be interruptible - EDID override improvements - fb/gem helper cleanups - Simple outreachy patches - Documentation improvements - Fix dma-buf rcu races - DRM mode object leasing for improving VR use cases. - vgaarb improvements for non-x86 platforms. New driver: - tve200: Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. New bridges: - SiI9234 support New panels: - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba LT089AC19000, Innolux AT043TN24 i915: - Remove Coffeelake from alpha support - Cannonlake workarounds - Infoframe refactoring for DisplayPort - VBT updates - DisplayPort vswing/emph/buffer translation refactoring - CCS fixes - Restore GPU clock boost on missed vblanks - Scatter list updates for userptr allocations - Gen9+ transition watermarks - Display IPC (Isochronous Priority Control) - Private PAT management - GVT: improved error handling and pci config sanitizing - Execlist refactoring - Transparent Huge Page support - User defined priorities support - HuC/GuC firmware refactoring - DP MST fixes - eDP power sequencing fixes - Use RCU instead of stop_machine - PSR state tracking support - Eviction fixes - BDW DP aux channel timeout fixes - LSPCON fixes - Cannonlake PLL fixes amdgpu: - Per VM BO support - Powerplay cleanups - CI powerplay support - PASID mgr for kfd - SR-IOV fixes - initial GPU reset for vega10 - Prime mmap support - TTM updates - Clock query interface for Raven - Fence to handle ioctl - UVD encode ring support on Polaris - Transparent huge page DMA support - Compute LRU pipe tweaks - BO flag to allow buffers to opt out of implicit sync - CTX priority setting API - VRAM lost infrastructure plumbing qxl: - fix flicker since atomic rework amdkfd: - Further improvements from internal AMD tree - Usermode events - Drop radeon support nouveau: - Pascal temperature sensor support - Improved BAR2 handling - MMU rework to support Pascal MMU exynos: - Improved HDMI/mixer support - HDMI audio interface support tegra: - Prep work for tegra186 - Cleanup/fixes msm: - Preemption support for a5xx - Display fixes for 8x96 (snapdragon 820) - Async cursor plane fixes - FW loading rework - GPU debugging improvements vc4: - Prep for DSI panels - fix T-format tiling scanout - New madvise ioctl Rockchip: - LVDS support omapdrm: - omap4 HDMI CEC support etnaviv: - GPU performance counters groundwork sun4i: - refactor driver load + TCON backend - HDMI improvements - A31 support - Misc fixes udl: - Probe/EDID read fixes. tilcdc: - Misc fixes. pl111: - Support more variants adv7511: - Improve EDID handling. - HDMI CEC support sii8620: - Add remote control support" * tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits) drm/rockchip: analogix_dp: Use mutex rather than spinlock drm/mode_object: fix documentation for object lookups. drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU drm/i915: Move init_clock_gating() back to where it was drm/i915: Prune the reservation shared fence array drm/i915: Idle the GPU before shinking everything drm/i915: Lock llist_del_first() vs llist_del_all() drm/i915: Calculate ironlake intermediate watermarks correctly, v2. drm/i915: Disable lazy PPGTT page table optimization for vGPU drm/i915/execlists: Remove the priority "optimisation" drm/i915: Filter out spurious execlists context-switch interrupts drm/amdgpu: use irq-safe lock for kiq->ring_lock drm/amdgpu: bypass lru touch for KIQ ring submission drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories() drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs() drm/amd/powerplay: initialize a variable before using it drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug drm/rockchip: add CONFIG_OF dependency for lvds ...
2017-11-15Merge tag 'media/v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
2017-11-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: - a few misc bits - ocfs2 updates - almost all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits) memory hotplug: fix comments when adding section mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP mm: simplify nodemask printing mm,oom_reaper: remove pointless kthread_run() error check mm/page_ext.c: check if page_ext is not prepared writeback: remove unused function parameter mm: do not rely on preempt_count in print_vma_addr mm, sparse: do not swamp log with huge vmemmap allocation failures mm/hmm: remove redundant variable align_end mm/list_lru.c: mark expected switch fall-through mm/shmem.c: mark expected switch fall-through mm/page_alloc.c: broken deferred calculation mm: don't warn about allocations which stall for too long fs: fuse: account fuse_inode slab memory as reclaimable mm, page_alloc: fix potential false positive in __zone_watermark_ok mm: mlock: remove lru_add_drain_all() mm, sysctl: make NUMA stats configurable shmem: convert shmem_init_inodecache() to void Unify migrate_pages and move_pages access checks mm, pagevec: rename pagevec drained field ...
2017-11-15mm: remove __GFP_COLDMel Gorman
As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm: remove cold parameter for release_pagesMel Gorman
All callers of release_pages claim the pages being released are cache hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-7-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15mm, pagevec: remove cold parameter for pagevecsMel Gorman
Every pagevec_init user claims the pages being released are hot even in cases where it is unlikely the pages are hot. As no one cares about the hotness of pages being released to the allocator, just ditch the parameter. No performance impact is expected as the overhead is marginal. The parameter is removed simply because it is a bit stupid to have a useless parameter copied everywhere. Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15drivers/block/zram/zram_drv.c: make zram_page_end_io() staticColin Ian King
zram_page_end_io() is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'zram_page_end_io' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20171016173336.20320-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15kmemcheck: remove annotationsLevin, Alexander (Sasha Levin)
Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15zram: remove zlib from the list of recommended algorithmsSergey Senozhatsky
ZSTD tends to outperform deflate/inflate, thus we remove zlib from the list of recommended algorithms and recommend zstd instead. Link: http://lkml.kernel.org/r/20170912050005.3247-2-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15zram: add zstd to the supported algorithms listSergey Senozhatsky
Add ZSTD to the list of supported compression algorithms. ZRAM fio perf test: LZO DEFLATE ZSTD #jobs1 WRITE: (2180MB/s) (77.2MB/s) (1429MB/s) WRITE: (1617MB/s) (77.7MB/s) (1202MB/s) READ: (426MB/s) (595MB/s) (1181MB/s) READ: (422MB/s) (572MB/s) (1020MB/s) READ: (318MB/s) (67.8MB/s) (563MB/s) WRITE: (318MB/s) (67.9MB/s) (564MB/s) READ: (336MB/s) (68.3MB/s) (583MB/s) WRITE: (335MB/s) (68.2MB/s) (582MB/s) #jobs2 WRITE: (3441MB/s) (152MB/s) (2141MB/s) WRITE: (2507MB/s) (147MB/s) (1888MB/s) READ: (801MB/s) (1146MB/s) (1890MB/s) READ: (767MB/s) (1096MB/s) (2073MB/s) READ: (621MB/s) (126MB/s) (1009MB/s) WRITE: (621MB/s) (126MB/s) (1009MB/s) READ: (656MB/s) (125MB/s) (1075MB/s) WRITE: (657MB/s) (126MB/s) (1077MB/s) #jobs3 WRITE: (4772MB/s) (225MB/s) (3394MB/s) WRITE: (3905MB/s) (211MB/s) (2939MB/s) READ: (1216MB/s) (1608MB/s) (3218MB/s) READ: (1159MB/s) (1431MB/s) (2981MB/s) READ: (906MB/s) (156MB/s) (1457MB/s) WRITE: (907MB/s) (156MB/s) (1458MB/s) READ: (953MB/s) (158MB/s) (1595MB/s) WRITE: (952MB/s) (157MB/s) (1593MB/s) #jobs4 WRITE: (6036MB/s) (265MB/s) (4469MB/s) WRITE: (5059MB/s) (263MB/s) (3951MB/s) READ: (1618MB/s) (2066MB/s) (4276MB/s) READ: (1573MB/s) (1942MB/s) (3830MB/s) READ: (1202MB/s) (227MB/s) (1971MB/s) WRITE: (1200MB/s) (227MB/s) (1968MB/s) READ: (1265MB/s) (226MB/s) (2116MB/s) WRITE: (1264MB/s) (226MB/s) (2114MB/s) #jobs5 WRITE: (5339MB/s) (233MB/s) (3781MB/s) WRITE: (4298MB/s) (234MB/s) (3276MB/s) READ: (1626MB/s) (2048MB/s) (4081MB/s) READ: (1567MB/s) (1929MB/s) (3758MB/s) READ: (1174MB/s) (205MB/s) (1747MB/s) WRITE: (1173MB/s) (204MB/s) (1746MB/s) READ: (1214MB/s) (208MB/s) (1890MB/s) WRITE: (1215MB/s) (208MB/s) (1892MB/s) #jobs6 WRITE: (5666MB/s) (270MB/s) (4338MB/s) WRITE: (4828MB/s) (267MB/s) (3772MB/s) READ: (1803MB/s) (2058MB/s) (4946MB/s) READ: (1805MB/s) (2156MB/s) (4711MB/s) READ: (1334MB/s) (235MB/s) (2135MB/s) WRITE: (1335MB/s) (235MB/s) (2137MB/s) READ: (1364MB/s) (236MB/s) (2268MB/s) WRITE: (1365MB/s) (237MB/s) (2270MB/s) #jobs7 WRITE: (5474MB/s) (270MB/s) (4300MB/s) WRITE: (4666MB/s) (266MB/s) (3817MB/s) READ: (2022MB/s) (2319MB/s) (5472MB/s) READ: (1924MB/s) (2260MB/s) (5031MB/s) READ: (1369MB/s) (242MB/s) (2153MB/s) WRITE: (1370MB/s) (242MB/s) (2155MB/s) READ: (1499MB/s) (246MB/s) (2310MB/s) WRITE: (1497MB/s) (246MB/s) (2307MB/s) #jobs8 WRITE: (5558MB/s) (273MB/s) (4439MB/s) WRITE: (4763MB/s) (271MB/s) (3918MB/s) READ: (2201MB/s) (2599MB/s) (6062MB/s) READ: (2105MB/s) (2463MB/s) (5413MB/s) READ: (1490MB/s) (252MB/s) (2238MB/s) WRITE: (1488MB/s) (252MB/s) (2236MB/s) READ: (1566MB/s) (254MB/s) (2434MB/s) WRITE: (1568MB/s) (254MB/s) (2437MB/s) #jobs9 WRITE: (5120MB/s) (264MB/s) (4035MB/s) WRITE: (4531MB/s) (267MB/s) (3740MB/s) READ: (1940MB/s) (2258MB/s) (4986MB/s) READ: (2024MB/s) (2387MB/s) (4871MB/s) READ: (1343MB/s) (246MB/s) (2038MB/s) WRITE: (1342MB/s) (246MB/s) (2037MB/s) READ: (1553MB/s) (238MB/s) (2243MB/s) WRITE: (1552MB/s) (238MB/s) (2242MB/s) #jobs10 WRITE: (5345MB/s) (271MB/s) (3988MB/s) WRITE: (4750MB/s) (254MB/s) (3668MB/s) READ: (1876MB/s) (2363MB/s) (5150MB/s) READ: (1990MB/s) (2256MB/s) (5080MB/s) READ: (1355MB/s) (250MB/s) (2019MB/s) WRITE: (1356MB/s) (251MB/s) (2020MB/s) READ: (1490MB/s) (252MB/s) (2202MB/s) WRITE: (1488MB/s) (252MB/s) (2199MB/s) jobs1 perfstat instructions 52,065,555,710 ( 0.79) 855,731,114,587 ( 2.64) 54,280,709,944 ( 1.40) branches 14,020,427,116 ( 725.847) 101,733,449,582 (1074.521) 11,170,591,067 ( 992.869) branch-misses 22,626,174 ( 0.16%) 274,197,885 ( 0.27%) 25,915,805 ( 0.23%) jobs2 perfstat instructions 103,633,110,402 ( 0.75) 1,710,822,100,914 ( 2.59) 107,879,874,104 ( 1.28) branches 27,931,237,282 ( 679.203) 203,298,267,479 (1037.326) 22,185,350,842 ( 884.427) branch-misses 46,103,811 ( 0.17%) 533,747,204 ( 0.26%) 49,682,483 ( 0.22%) jobs3 perfstat instructions 154,857,283,657 ( 0.76) 2,565,748,974,197 ( 2.57) 161,515,435,813 ( 1.31) branches 41,759,490,355 ( 670.529) 304,905,605,277 ( 978.765) 33,215,805,907 ( 888.003) branch-misses 74,263,293 ( 0.18%) 759,746,240 ( 0.25%) 76,841,196 ( 0.23%) jobs4 perfstat instructions 206,215,849,076 ( 0.75) 3,420,169,460,897 ( 2.60) 215,003,061,664 ( 1.31) branches 55,632,141,739 ( 666.501) 406,394,977,433 ( 927.241) 44,214,322,251 ( 883.532) branch-misses 102,287,788 ( 0.18%) 1,098,617,314 ( 0.27%) 103,891,040 ( 0.23%) jobs5 perfstat instructions 258,711,315,588 ( 0.67) 4,275,657,533,244 ( 2.23) 269,332,235,685 ( 1.08) branches 69,802,821,166 ( 588.823) 507,996,211,252 ( 797.036) 55,450,846,129 ( 735.095) branch-misses 129,217,214 ( 0.19%) 1,243,284,991 ( 0.24%) 173,512,278 ( 0.31%) jobs6 perfstat instructions 312,796,166,008 ( 0.61) 5,133,896,344,660 ( 2.02) 323,658,769,588 ( 1.04) branches 84,372,488,583 ( 520.541) 610,310,494,402 ( 697.642) 66,683,292,992 ( 693.939) branch-misses 159,438,978 ( 0.19%) 1,396,368,563 ( 0.23%) 174,406,934 ( 0.26%) jobs7 perfstat instructions 363,211,372,930 ( 0.56) 5,988,205,600,879 ( 1.75) 377,824,674,156 ( 0.93) branches 98,057,013,765 ( 463.117) 711,841,255,974 ( 598.762) 77,879,009,954 ( 600.443) branch-misses 199,513,153 ( 0.20%) 1,507,651,077 ( 0.21%) 248,203,369 ( 0.32%) jobs8 perfstat instructions 413,960,354,615 ( 0.52) 6,842,918,558,378 ( 1.45) 431,938,486,581 ( 0.83) branches 111,812,574,884 ( 414.224) 813,299,084,518 ( 491.173) 89,062,699,827 ( 517.795) branch-misses 233,584,845 ( 0.21%) 1,531,593,921 ( 0.19%) 286,818,489 ( 0.32%) jobs9 perfstat instructions 465,976,220,300 ( 0.53) 7,698,467,237,372 ( 1.47) 486,352,600,321 ( 0.84) branches 125,931,456,162 ( 424.063) 915,207,005,715 ( 498.192) 100,370,404,090 ( 517.439) branch-misses 256,992,445 ( 0.20%) 1,782,809,816 ( 0.19%) 345,239,380 ( 0.34%) jobs10 perfstat instructions 517,406,372,715 ( 0.53) 8,553,527,312,900 ( 1.48) 540,732,653,094 ( 0.84) branches 139,839,780,676 ( 427.732) 1,016,737,699,389 ( 503.172) 111,696,557,638 ( 516.750) branch-misses 259,595,561 ( 0.19%) 1,952,570,279 ( 0.19%) 357,818,661 ( 0.32%) seconds elapsed 20.630411534 96.084546565 12.743373571 seconds elapsed 22.292627625 100.984155001 14.407413560 seconds elapsed 22.396016966 110.344880848 14.032201392 seconds elapsed 22.517330949 113.351459170 14.243074935 seconds elapsed 28.548305104 156.515193765 19.159286861 seconds elapsed 30.453538116 164.559937678 19.362492717 seconds elapsed 33.467108086 188.486827481 21.492612173 seconds elapsed 35.617727591 209.602677783 23.256422492 seconds elapsed 42.584239509 243.959902566 28.458540338 seconds elapsed 47.683632526 269.635248851 31.542404137 Over all, ZSTD has slower WRITE, but much faster READ (perhaps a static compression buffer used during the test helped ZSTD a lot), which results in faster test results. Memory consumption (zram mm_stat file): zram LZO mm_stat mm_stat (jobs1): 2147483648 23068672 33558528 0 33558528 0 0 mm_stat (jobs2): 2147483648 23068672 33558528 0 33558528 0 0 mm_stat (jobs3): 2147483648 23068672 33558528 0 33562624 0 0 mm_stat (jobs4): 2147483648 23068672 33558528 0 33558528 0 0 mm_stat (jobs5): 2147483648 23068672 33558528 0 33558528 0 0 mm_stat (jobs6): 2147483648 23068672 33558528 0 33562624 0 0 mm_stat (jobs7): 2147483648 23068672 33558528 0 33566720 0 0 mm_stat (jobs8): 2147483648 23068672 33558528 0 33558528 0 0 mm_stat (jobs9): 2147483648 23068672 33558528 0 33558528 0 0 mm_stat (jobs10): 2147483648 23068672 33558528 0 33562624 0 0 zram DEFLATE mm_stat mm_stat (jobs1): 2147483648 16252928 25178112 0 25178112 0 0 mm_stat (jobs2): 2147483648 16252928 25178112 0 25178112 0 0 mm_stat (jobs3): 2147483648 16252928 25178112 0 25178112 0 0 mm_stat (jobs4): 2147483648 16252928 25178112 0 25178112 0 0 mm_stat (jobs5): 2147483648 16252928 25178112 0 25178112 0 0 mm_stat (jobs6): 2147483648 16252928 25178112 0 25178112 0 0 mm_stat (jobs7): 2147483648 16252928 25178112 0 25190400 0 0 mm_stat (jobs8): 2147483648 16252928 25178112 0 25190400 0 0 mm_stat (jobs9): 2147483648 16252928 25178112 0 25178112 0 0 mm_stat (jobs10): 2147483648 16252928 25178112 0 25178112 0 0 zram ZSTD mm_stat mm_stat (jobs1): 2147483648 11010048 16781312 0 16781312 0 0 mm_stat (jobs2): 2147483648 11010048 16781312 0 16781312 0 0 mm_stat (jobs3): 2147483648 11010048 16781312 0 16785408 0 0 mm_stat (jobs4): 2147483648 11010048 16781312 0 16781312 0 0 mm_stat (jobs5): 2147483648 11010048 16781312 0 16781312 0 0 mm_stat (jobs6): 2147483648 11010048 16781312 0 16781312 0 0 mm_stat (jobs7): 2147483648 11010048 16781312 0 16781312 0 0 mm_stat (jobs8): 2147483648 11010048 16781312 0 16781312 0 0 mm_stat (jobs9): 2147483648 11010048 16781312 0 16785408 0 0 mm_stat (jobs10): 2147483648 11010048 16781312 0 16781312 0 0 ================================================================================== Official benchmarks [1]: Compressor name Ratio Compression Decompress. zstd 1.1.3 -1 2.877 430 MB/s 1110 MB/s zlib 1.2.8 -1 2.743 110 MB/s 400 MB/s brotli 0.5.2 -0 2.708 400 MB/s 430 MB/s quicklz 1.5.0 -1 2.238 550 MB/s 710 MB/s lzo1x 2.09 -1 2.108 650 MB/s 830 MB/s lz4 1.7.5 2.101 720 MB/s 3600 MB/s snappy 1.1.3 2.091 500 MB/s 1650 MB/s lzf 3.6 -1 2.077 400 MB/s 860 MB/s Minchan said: : I did test with my sample data and compared zstd with deflate. zstd's : compress ratio is lower a little bit but compression speed is much faster : 3 times more and decompress speed is too 2 times more. With different : data, it is different but overall, zstd would be better for speed at the : cost of a little lower compress ratio(about 5%) so I believe it's worth to : replace deflate. [1] https://github.com/facebook/zstd Link: http://lkml.kernel.org/r/20170912050005.3247-1-sergey.senozhatsky@gmail.com Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Tested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15bdi: introduce BDI_CAP_SYNCHRONOUS_IOMinchan Kim
As discussed at https://lkml.kernel.org/r/<20170728165604.10455-1-ross.zwisler@linux.intel.com> someday we will remove rw_page(). If so, we need something to detect such super-fast storage on which synchronous IO operations like the current rw_page are always a win. Introduces BDI_CAP_SYNCHRONOUS_IO to indicate such devices. With it, we could use various optimization techniques. Link: http://lkml.kernel.org/r/1505886205-9671-3-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15zram: set BDI_CAP_STABLE_WRITES onceMinchan Kim
With fast swap storage, the platform wants to use swap more aggressively and swap-in is crucial to application latency. The rw_page() based synchronous devices like zram, pmem and btt are such fast storage. When I profile swapin performance with zram lz4 decompress test, S/W overhead is more than 70%. Maybe, it would be bigger in nvdimm. This patchset reduces swap-in latency by skipping swapcache if the swap device is a synchronous device like a rw_page() based device. It enhances by 45% my swapin test (5G sequential swapin, no readahead) from 2.41sec to 1.64sec. This patch (of 4): Commit 19b7ccf8651d ("block: get rid of blk_integrity_revalidate()") fixed a weird thing (i.e., reset BDI_CAP_STABLE_WRITES flag unconditionally whenever revalidat_disk is called) so zram doesn't need to reset the flag any more when revalidating the bdev. Instead, set the flag just once when the zram device is created. It shouldn't change any behavior. Link: http://lkml.kernel.org/r/1505886205-9671-2-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hugh Dickins <hughd@google.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15drivers/infiniband/sw/rdmavt/qp.c: use kmalloc_array_node()Johannes Thumshirn
Now that we have a NUMA-aware version of kmalloc_array() we can use it instead of kmalloc_node() without an overflow check in the size calculation. Link: http://lkml.kernel.org/r/20170927082038.3782-5-jthumshirn@suse.de Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15drivers/infiniband/hw/qib/qib_init.c: use kmalloc_array_node()Johannes Thumshirn
Now that we have a NUMA-aware version of kmalloc_array() we can use it instead of kmalloc_node() without an overflow check in the size calculation. Link: http://lkml.kernel.org/r/20170927082038.3782-4-jthumshirn@suse.de Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15Merge tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmiLinus Torvalds
Pull IPMI updates from Corey Minyard: "This is a fairly large rework of the IPMI code, along with a bunch of smaller fixes. The major changes have been in the next tree for a couple of months, so they should be good to do in. - Some users had IPMI systems where the GUID of the IPMI controller could change. So rescanning of the GUID was added. The naming of some sysfs things was dependent on the GUID, however, so this resulted in the sysfs interface code in IPMI changing to remove that dependency and name the IPMI BMCs like other sysfs devices. - The ipmi_si_intf.c code was fairly bloated with all the different discovery methods (PCI, ACPI, SMBIOS, OF, platform, module parameters, hot add). The structure of how the interfaces were added was redone to make them more modular, then the individual methods were pulled out into their own files" * tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits) ipmi_si: Delete an error message for a failed memory allocation in try_smi_init() ipmi_si: fix memory leak on new_smi ipmi: remove redundant initialization of bmc ipmi: pr_err() strings should end with newlines ipmi: Clean up some print operations ipmi: Make the DMI probe into a generic platform probe ipmi: Make the IPMI proc interface configurable ipmi_ssif: Add device attrs for the things in proc ipmi_si: Add device attrs for the things in proc ipmi_si: remove ipmi_smi_alloc() function ipmi_si: Move port and mem I/O handling to their own files ipmi_si: Get rid of unused spacing and port fields ipmi_si: Move PARISC handling to another file ipmi_si: Move PCI setup to another file ipmi_si: Move platform device handling to another file ipmi_si: Move hardcode handling to a separate file. ipmi_si: Move the hotmod handling to another file. ipmi_si: Change ipmi_si_add_smi() to take just I/O info ipmi_si: Move io setup into io structure ipmi_si: Move irq setup handling into the io struct ...
2017-11-15Merge tag 'pci-v4.15-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
2017-11-15Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "This is a fairly plain pull request. Lots of driver updates across the stack, a huge number of static analysis cleanups including a close to 50 patch series from Bart Van Assche, and a number of new features inside the stack such as general CQ moderation support. Nothing really stands out, but there might be a few conflicts as you take things in. In particular, the cleanups touched some of the same lines as the new timer_setup changes. Everything in this pull request has been through 0day and at least two days of linux-next (since Stephen doesn't necessarily flag new errors/warnings until day2). A few more items (about 30 patches) from Intel and Mellanox showed up on the list on Tuesday. I've excluded those from this pull request, and I'm sure some of them qualify as fixes suitable to send any time, but I still have to review them fully. If they contain mostly fixes and little or no new development, then I will probably send them through by the end of the week just to get them out of the way. There was a break in my acceptance of patches which coincides with the computer problems I had, and then when I got things mostly back under control I had a backlog of patches to process, which I did mostly last Friday and Monday. So there is a larger number of patches processed in that timeframe than I was striving for. Summary: - Add iWARP support to qedr driver - Lots of misc fixes across subsystem - Multiple update series to hns roce driver - Multiple update series to hfi1 driver - Updates to vnic driver - Add kref to wait struct in cxgb4 driver - Updates to i40iw driver - Mellanox shared pull request - timer_setup changes - massive cleanup series from Bart Van Assche - Two series of SRP/SRPT changes from Bart Van Assche - Core updates from Mellanox - i40iw updates - IPoIB updates - mlx5 updates - mlx4 updates - hns updates - bnxt_re fixes - PCI write padding support - Sparse/Smatch/warning cleanups/fixes - CQ moderation support - SRQ support in vmw_pvrdma" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits) RDMA/core: Rename kernel modify_cq to better describe its usage IB/mlx5: Add CQ moderation capability to query_device IB/mlx4: Add CQ moderation capability to query_device IB/uverbs: Add CQ moderation capability to query_device IB/mlx5: Exposing modify CQ callback to uverbs layer IB/mlx4: Exposing modify CQ callback to uverbs layer IB/uverbs: Allow CQ moderation with modify CQ iw_cxgb4: atomically flush the qp iw_cxgb4: only call the cq comp_handler when the cq is armed iw_cxgb4: Fix possible circular dependency locking warning RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion IB/core: Only maintain real QPs in the security lists IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey RDMA/core: Make function rdma_copy_addr return void RDMA/vmw_pvrdma: Add shared receive queue support RDMA/core: avoid uninitialized variable warning in create_udata RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP RDMA/bnxt_re: Set QP state in case of response completion errors RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries ...
2017-11-15Merge branch 'for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: "Nothing too interesting or alarming. Other than a new power saving mode addition to ahci and crash fix on a tracepoint, all changes are trivial or device-specific" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode. ata: sata_dwc_460ex: Propagate platform device ID to DMA driver ata: fixes kernel crash while tracing ata_eh_link_autopsy event ata: pata_pdc2027x: Fix space before '[' error. libata: fix spelling mistake: 'ambigious' -> 'ambiguous' ata: ceva: Add SMMU support for SATA IP ata: ceva: Correct the suspend and resume logic for SATA ata: ceva: Correct the AXI bus configuration for SATA ports ata: ceva: Add CCI support for SATA if CCI is enabled ata: ceva: Make RxWaterMark value as module parameter ata: ceva: Disable Device Sleep capability ata: ceva: Add gen 3 mode support in driver ata: ceva: Move sata port phy oob settings to device-tree devicetree: bindings: Add sata port phy config parameters in ahci-ceva ata: mark expected switch fall-throughs ata: sata_mv: remove a redundant assignment to pointer ehi ahci: Add support for Cavium's fifth generation SATA controller ata: sata_rcar: Use of_device_get_match_data() helper libata: make ata_port_type const libata: make static arrays const, reduces object code size ...
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-15Merge tag 'mailbox-v4.15' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "Change to POLL api and fixes for FlexRM and OMAP driver. Summary: - Core: Prefer ACK method over POLL, if both supported - Test: use flag instead of special character - FlexRM: Usual driver internal minor churn - Omap: fix error path" * tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/omap: unregister mbox class mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCs mailbox: bcm-flexrm-mailbox: Use common GPL comment header mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROC mailbox: bcm-flexrm-mailbox: Print ring number in errors and warnings mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence
2017-11-15xen/pvcalls: fix potential endless loop in pvcalls-front.cStefano Stabellini
mutex_trylock() returns 1 if you take the lock and 0 if not. Assume you take in_mutex on the first try, but you can't take out_mutex. Next times you call mutex_trylock() in_mutex is going to fail. It's an endless loop. Solve the problem by waiting until the global refcount is 1 instead (the refcount is 1 when the only active pvcalls frontend function is pvcalls_front_release). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-15Merge tag 'for-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - misc minor fixes * tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: cpcap-charger: fix incorrect return value check power: supply: replace pr_* with dev_* power: supply: pcf50633-charger: remove redundant variable charging_start power: supply: generic-adc-battery: remove redundant variable pdata power: supply: max8997: Improve a size determination in probe
2017-11-15Merge tag 'hsi-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: - add HSI OMAP4 bindings - misc small fixes * tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: dt-bindings: hsi: add omap4 hsi controller bindings HSI: hsi_char: pr_err() strings should end with newlines HSI: omap_ssi_core: fix kilo to be "k" not "K"
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-15Merge tag 'mips_4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.15. Fixes: - ralink: Fix MT7620 PCI build issues (4.5) - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP (4.1) - Fix MIPS64 FP save/restore on 32-bit kernels (4.0) - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19) - ralink: Fix MT7628 pinmux (3.19) - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17) - Fix n32 core dumping as o32 since regset support (3.13) - ralink: Drop obsolete USB_ARCH_HAS_HCD select Build system: - Default to "generic" (multiplatform) system type instead of IP22 - Use generic little endian MIPS32 r2 configuration as default defconfig instead of ip22_defconfig FPU emulation: - Fix exception generation for certain R6 FPU instructions SMP: - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id spaces Miscellaneous: - Add iomem resource for kernel bss section for kexec/kdump - Atomics: Nudge writes on bit unlock - DT files: Standardise "ok" -> "okay" Minor cleanups: - Define virt_to_pfn() - Make thread_saved_pc static - Simplify 32-bit sign extension in __read_64bit_c0_split() - DMA: Use vma_pages() helper - FPU emulation: Replace unsigned with unsigned int - MM: Removed unused lastpfn - Alchemy: Make clk_ops const - Lasat: Use setup_timer() helper - ralink: Use BIT() in MT7620 PCI driver Platform support: BMIPS: - Enable HARDIRQS_SW_RESEND Broadcom BCM63XX: - Add clkdev lookup support - Update clk driver, UART driver, DTs to handle named refclk from DTs - Split apart various clocks to more closely match hardware - Add ethernet clocks Cavium Octeon: - Remove usage of cvmx_wait() in favour of __delay() ImgTec Pistachio: - DT: Drop deprecated dwmmc num-slots property Ingenic JZ4780: - Add NFS root to Ci20 defconfig - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog driver with this SoC Generic (multiplatform): - Migrate xilfpga (MIPSfpga) platform to the generic platform Lantiq xway: - Fix ASC0/ASC1 clocks" * tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits) MIPS: Add iomem resource for kernel bss section. MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP MIPS: BMIPS: Enable HARDIRQS_SW_RESEND MIPS: pci: Make use of the BIT() macro inside the mt7620 driver MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver MIPS: pci: Remove duplicate define in mt7620 driver MIPS: ralink: Fix typo in mt7628 pinmux function MIPS: ralink: Fix MT7628 pinmux MIPS: Fix odd fp register warnings with MIPS64r2 watchdog: jz4780: Allow selection of jz4740-wdt driver MIPS/ptrace: Update syscall nr on register changes MIPS/ptrace: Pick up ptrace/seccomp changed syscalls MIPS: Fix an n32 core file generation regset support regression MIPS: Fix MIPS64 FP save/restore on 32-bit kernels MIPS: page.h: Define virt_to_pfn() MIPS: Xilfpga: Switch to using generic defconfigs MIPS: generic: Add support for MIPSfpga MIPS: Set defconfig target to a generic system for 32r2el MIPS: Kconfig: Set default MIPS system type as generic MIPS: DTS: Remove num-slots from Pistachio SoC ...
2017-11-15Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-15xen/pvcalls: Add MODULE_LICENSE()Boris Ostrovsky
Since commit ba1029c9cbc5 ("modpost: detect modules without a MODULE_LICENSE") modules without said macro will generate WARNING: modpost: missing MODULE_LICENSE() in <filename> While at it, also add module description and attribution. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - high resolution mode for Dell canvas support, from Benjamin Tissoires - pen handling fixes for the Wacom driver, from Jason Gerecke - i2c-hid: Apollo-Lake based laptops improvements, from Hans de Goede - Input/Core: eraser tool support, from Ping Cheng - new ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook Stduio and HP Elite book x360) supportm from Masaki Ota - other smaller assorted fixes * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits) HID: cp2112: fix broken gpio_direction_input callback HID: cp2112: fix interface specification URL HID: Wacom: switch Dell canvas into highres mode HID: wacom: generic: Send BTN_STYLUS3 when both barrel switches are set HID: sony: Fix SHANWAN pad rumbling on USB HID: i2c-hid: Add no-irq-after-reset quirk for 0911:5288 device HID: add backlight level quirk for Asus ROG laptops HID: cp2112: add HIDRAW dependency HID: Add ID 044f:b605 ThrustMaster, Inc. force feedback Racing Wheel HID: hid-logitech: remove redundant assignment to pointer value HID: wacom: generic: Recognize WACOM_HID_WD_PEN as a type of pen collection HID: rmi: Check that a device is a RMI device before calling RMI functions HID: add multi-input quirk for GamepadBlock HID: alps: add new U1 device ID HID: alps: add support for Alps T4 Touchpad device HID: alps: remove variables local to u1_init() from the device struct HID: alps: properly handle max_fingers and minimum on X and Y axis HID: alps: Separate U1 device code HID: alps: delete unnecessary struct u1_dev devInfo HID: usbhid: Convert timers to use timer_setup() ...
2017-11-15geneve: fix fill_info when link downHangbin Liu
geneve->sock4/6 were added with geneve_open and released with geneve_stop. So when geneve link down, we will not able to show remote address and checksum info after commit 11387fe4a98 ("geneve: fix fill_info when using collect_metadata"). Fix this by avoid passing *_REMOTE{,6} for COLLECT_METADATA since they are mutually exclusive, and always show UDP_ZERO_CSUM6_RX info. Fixes: 11387fe4a98 ("geneve: fix fill_info when using collect_metadata") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15net: cdc_ncm: GetNtbFormat endian fixBjørn Mork
The GetNtbFormat and SetNtbFormat requests operate on 16 bit little endian values. We get away with ignoring this most of the time, because we only care about USB_CDC_NCM_NTB16_FORMAT which is 0x0000. This fails for USB_CDC_NCM_NTB32_FORMAT. Fix comparison between LE value from device and constant by converting the constant to LE. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Fixes: 2b02c20ce0c2 ("cdc_ncm: Set NTB format again after altsetting switch for Huawei devices") Cc: Enrico Mioso <mrkiko.rs@gmail.com> Cc: Christian Panton <christian@panton.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-By: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-15Merge branch 'for-4.15/wacom' into for-linusJiri Kosina
- High resolution mode for DEll canvas support, from Benjamin Tissoires - A lot of improvements to pen handling in the Wacom driver, from Jason Gerecke Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/use-timer-setup' into for-linusJiri Kosina
- usbhid: conversion to timer_setup() and from_timer() from Kees Cook Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/upstream' into for-linusJiri Kosina
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski - i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede - Input/Core: add eraser tool support, from Ping Cheng - small assorted code fixes Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/sony' into for-linusJiri Kosina
- SHANWAN PS3 rumble fix from Bastien Nocera Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/multitouch' into for-linusJiri Kosina
- make sure that we forward MSC_TIMESTAMP in accordance to the specification, from Nicolas Boichat Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-11-15Merge branch 'for-4.15/logitech' into for-linusJiri Kosina
- small code fixes for Logitech driver from Colin Ian King