summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-09-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rapidio/rio_cm: avoid GFP_KERNEL in atomic context Revert "ocfs2: bump up o2cb network protocol version" ocfs2: fix start offset to ocfs2_zero_range_for_truncate() cgroup: duplicate cgroup reference when cloning sockets mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting ocfs2: fix double unlock in case retry after free truncate log fanotify: fix list corruption in fanotify_get_response() fsnotify: add a way to stop queueing events on group shutdown ocfs2: fix trans extend while free cached blocks ocfs2: fix trans extend while flush truncate log ipc/shm: fix crash if CONFIG_SHMEM is not set mm: fix the page_swap_info() BUG_ON check autofs: use dentry flags to block walks during expire MAINTAINERS: update email for VLYNQ bus entry mm: avoid endless recursion in dump_page() mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin() khugepaged: fix use-after-free in collapse_huge_page() MAINTAINERS: Maik has moved ocfs2/dlm: fix race between convert and migration mem-hotplug: don't clear the only node in new_node_page()
2016-09-19rapidio/rio_cm: avoid GFP_KERNEL in atomic contextAlexandre Bounine
As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737): riocm_send_close() is called from rio_cm_shutdown() under spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL allocation. Fix by taking riocm_send_close() outside of spinlock protected code. [akpm@linux-foundation.org: remove unneeded `if (!list_empty())'] Link: http://lkml.kernel.org/r/20160915175402.10122-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-19Merge tag 'drm-fixes-for-4.8-rc7' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull exynos and one stable ABI fix from Dave Airlie: "One important drm 32/64 ABI fix came in so I'll dequeue what I have, the rest is just exynos runtime pm fixes, but the net removal of code seems like a win to me. I'm going to be sporadic this week due to school holidays, so if anything urgent turns up, Daniel will take care of it" * tag 'drm-fixes-for-4.8-rc7' of git://people.freedesktop.org/~airlied/linux: drm: Only use compat ioctl for addfb2 on X86/IA64 Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning drm/exynos: g2d: fix system and runtime pm integration drm/exynos: rotator: fix system and runtime pm integration drm/exynos: gsc: fix system and runtime pm integration drm/exynos: fimc: fix system and runtime pm integration exynos-drm: Fix unsupported GEM memory type error message to be clear
2016-09-19drm: Only use compat ioctl for addfb2 on X86/IA64Kristian H. Kristensen
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-09-19Subject: [PATCH, RESEND] drm: exynos: avoid unused function warningArnd Bergmann
When CONFIG_PM is not set, we get a warning about an unused function: drivers/gpu/drm/exynos/exynos_drm_gsc.c:1219:12: error: 'gsc_clk_ctrl' defined but not used [-Werror=unused-function] static int gsc_clk_ctrl(struct gsc_context *ctx, bool enable) ^~~~~~~~~~~~ This removes the two #ifdef checks in this file and instead marks the functions as __maybe_unused, which is a more reliable way of doing the same, allowing better build coverage and avoiding the warning above. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18Merge tag 'usb-4.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two small fixes, and one new device id, for 4.8-rc7 The fixes solve a build error that was reported in your tree for the blackfin arch, and resolve an issue with a number of broken USB devices that reported the wrong interval rate. Included here is also a new device id for the usb-serial driver. All have been in linux-next with no reported issues" * tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: change bInterval default to 10 ms usb: musb: Fix tusb6010 compile error on blackfin USB: serial: simple: add support for another Infineon flashloader
2016-09-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two patches from Boris which address a potential deadlock in the atmel irq chip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic: Fix potential deadlock in ->xlate() genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
2016-09-18drm/exynos: g2d: fix system and runtime pm integrationMarek Szyprowski
Move code from system sleep pm to runtime pm callbacks to ensure proper driver state preservation when device is under power domain. Then, use generic helpers for using runtime pm for system sleep pm. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18drm/exynos: rotator: fix system and runtime pm integrationMarek Szyprowski
Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18drm/exynos: gsc: fix system and runtime pm integrationMarek Szyprowski
Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18drm/exynos: fimc: fix system and runtime pm integrationMarek Szyprowski
Use generic helpers instead of open-coding usage of runtime pm for system sleep pm, which was potentially broken for some corner cases. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-18exynos-drm: Fix unsupported GEM memory type error message to be clearShuah Khan
Fix unsupported GEM memory type error message to include the memory type information. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2016-09-17Merge tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC fixes from Ulf Hansson: "MMC host: - omap/omap_hsmmc: Initialize dma_slave_config to avoid random data - sdhci-st: Handle interconnect clock" * tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: omap: Initialize dma_slave_config to avoid random data in it's fields mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data mmc: sdhci-st: Handle interconnect clock dt-bindings: mmc: sdhci-st: Mention the discretionary "icn" clock
2016-09-16Merge tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Two sets of i915 fixes, one set of vc4 crasher fixes, and a couple of atmel fixes. Nothing too out there at this stage, though I think some people are holidaying so it's been quiet enough" * tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linux: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message drm/vc4: mark vc4_bo_cache_purge() static drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB drm/i915: disable 48bit full PPGTT when vGPU is active drm/i915: enable vGPU detection for all drm/atmel-hlcdc: Make ->reset() implementation static drm: atmel-hlcdc: Fix vertical scaling drm/vc4: Allow some more signals to be packed with uniform resets. drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
2016-09-16Merge tag 'pm-4.8-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "More annotations of tracepoints in the runtime PM framework to prevent RCU from complaining when that code is invoked from the idle path (Paul McKenney)" * tag 'pm-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Use _rcuidle for runtime suspend tracepoints
2016-09-17Merge tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux into ↵Dave Airlie
drm-fixes This pull request brings in a fix for crashes in X on VC4. * tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux: drm/vc4: mark vc4_bo_cache_purge() static drm/vc4: Allow some more signals to be packed with uniform resets.
2016-09-17Merge tag 'drm-intel-fixes-2016-09-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes from Jani. * tag 'drm-intel-fixes-2016-09-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message
2016-09-16Merge tag 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Round three of 4.8 rc fixes. This is likely the last rdma pull request this cycle. The new rxe driver had a few issues (you probably saw the boot bot bug report) and they should be addressed now. There are a couple other fixes here, mainly mlx4. There are still two outstanding issues that need resolved but I don't think their fix will make this kernel cycle. Summary: - Various fixes to rdmavt, ipoib, mlx5, mlx4, rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/rdmavt: Don't vfree a kzalloc'ed memory region IB/rxe: Fix kmem_cache leak IB/rxe: Fix race condition between requester and completer IB/rxe: Fix duplicate atomic request handling IB/rxe: Fix kernel panic in udp_setup_tunnel IB/mlx5: Set source mac address in FTE IB/mlx5: Enable MAD_IFC commands for IB ports only IB/mlx4: Diagnostic HW counters are not supported in slave mode IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV IB/mlx4: Fix code indentation in QP1 MAD flow IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV IB/ipoib: Don't allow MC joins during light MC flush IB/rxe: fix GFP_KERNEL in spinlock context
2016-09-16Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Most of this update are fixes primarily discovered from testing on the older StrongARM 1110 and PXA systems, as a result of recent interest from several people in these platforms: - Locomo interrupt handling incorrectly stores the handler data in the chip's private data slot: when Locomo is combined with an interrupt controller who's chip uses the chip private data, this leads to an oops. - SA1111 was missing a call to clk_disable() to clean up after a failed probe. - SA1111 and PCMCIA suspend/resume was broken: The PCMCIA "ds" layer was using the legacy bus suspend/resume methods, which the core PM code is no longer calling as a result of device_pm_check_callbacks() introduced in commit aa8e54b559479 ("PM / sleep: Go direct_complete if driver has no callbacks"). SA1111 was broken due to changes to PCMCIA which makes PCMCIA suspend itself later than the SA1111 code expects, and resume before the SA1111 code has initialised access to the pcmcia sub-device. - the default SA1111 interrupt mask polarity got messed up when it was converted to use a dynamic interrupt base number for its interrupts. - fix platform_get_irq() error code propagation, which was causing problems on platforms where the interrupt may not be available at probe time in DT setups. - fix the lack of clock to PCMCIA code on PXA platforms, which was omitted in conversions of PXA to CCF. - fix an oops in the PXA PCMCIA code caused by a previous commit not realising that Lubbock is different from the rest of the PXA PCMCIA drivers. - ensure that SA1111 low-level PCMCIA drivers propagate their error codes to the main probe function, rather than the driver silently accepting a failure. - fix the sa11xx debugfs reporting of timing information, which always indicated zero due to the clock being a factor of 1000 out. - fix the polarity of the status change signal reported from the sockets. Lastly, one ARM specific commit from Stefan Agner fixing the LPAE cache attributes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: pxa/lubbock: add pcmcia clock ARM: locomo: fix locomo irq handling ARM: 8612/1: LPAE: initialize cache policy correctly ARM: sa1111: fix missing clk_disable() ARM: sa1111: fix pcmcia suspend/resume ARM: sa1111: fix pcmcia interrupt mask polarity ARM: sa1111: fix error code propagation in sa1111_probe() pcmcia: lubbock: fix sockets configuration pcmcia: sa1111: fix propagation of lowlevel board init return code pcmcia: soc_common: fix SS_STSCHG polarity pcmcia: sa11xx_base: add units to the timing information pcmcia: sa11xx_base: fix reporting of timing information pcmcia: ds: fix suspend/resume
2016-09-16IB/rdmavt: Don't vfree a kzalloc'ed memory regionColin Ian King
The userspace memory region 'mr' is allocated with kzalloc in __rvt_alloc_mr however it is incorrectly being freed with vfree in __rvt_free_mr. Fix this by using kfree to free it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix kmem_cache leakYonatan Cohen
Decrement qp reference when handling error path in completer to prevent kmem_cache leak. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix race condition between requester and completerYonatan Cohen
rxe_requester() is sending a pkt with rxe_xmit_packet() and then calls rxe_update() to update the wqe and qp's psn values. But sometimes the response is received before the requester had time to update the wqe in which case the completer acts on errornous wqe values. This fix updates the wqe and qp before actually sending the request and rolls back when xmit fails. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix duplicate atomic request handlingYonatan Cohen
When handling ack for atomic opcodes like "fetch&add" or "cmp&swp", the method send_atomic_ack() saves the ack before sending it, in case it gets lost and never reach the requester. In which case the method duplicate_request() will need to find it using the duplicated request.psn. But send_atomic_ack() used a wrong psn value and thus the above ack was never found. This fix uses the ack.psn to locate the ack in case its needed. This fix also copies the ack packet to the skb's control buffer since duplicate_request() will need it when calling rxe_xmit_packet() Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix kernel panic in udp_setup_tunnelYonatan Cohen
Disable creation of a UDP socket for ipv6 when CONFIG_IPV6 is not enabeld. Since udp_sock_create6() returns 0 when CONFIG_IPV6 is not set [ 46.888632] IP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f [ 46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 [ 46.893918] Oops: 0002 [#1] PREEMPT [ 46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e #1 [ 46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000 [ 46.907854] EIP: 0060:[<c220705a>] EFLAGS: 00210246 CPU: 0 [ 46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f [ 46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0 [ 46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0 [ 46.919836] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0 [ 46.924550] Stack: [ 46.926014] cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008 [ 46.931274] 00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000 [ 46.936122] cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74 [ 46.942350] Call Trace: [ 46.944403] [<c1fd4657>] rxe_setup_udp_tunnel+0x8f/0x99 [ 46.947689] [<c1fd48de>] ? net_to_rxe+0x4e/0x4e [ 46.950567] [<c1fd4bdf>] rxe_net_init+0xe/0xa4 [ 46.953147] [<c2c4507b>] rxe_module_init+0x20/0x4c [ 46.955448] [<c2bf1c74>] do_one_initcall+0x89/0x113 [ 46.957797] [<c2bf15eb>] ? set_debug_rodata+0xf/0xf [ 46.959966] [<c2bf1dbc>] ? kernel_init_freeable+0xbe/0x15b [ 46.962262] [<c2bf1ddc>] kernel_init_freeable+0xde/0x15b [ 46.964418] [<c232eb54>] kernel_init+0x8/0xd0 [ 46.966618] [<c2333122>] ret_from_kernel_thread+0xe/0x24 [ 46.969592] [<c232eb4c>] ? rest_init+0x6f/0x6f Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx5: Set source mac address in FTEMaor Gottlieb
Set the source mac address in the FTE when L2 specification is provided. Fixes: 038d2ef87572 ('IB/mlx5: Add flow steering support') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx5: Enable MAD_IFC commands for IB ports onlyNoa Osherovich
MAD_IFC command is supported only for physical functions (PF) and when physical port is IB. The proposed fix enforces it. Fixes: d603c809ef91 ("IB/mlx5: Fix decision on using MAD_IFC") Reported-by: David Chang <dchang@suse.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Diagnostic HW counters are not supported in slave modeKamal Heib
Modify the mlx4_ib_diag_counters() to avoid the following error in the hypervisor when the slave tries to query the hardware counters in SR-IOV mode. mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1 Fixes: 3f85f2aaabf7 ("IB/mlx4: Add diagnostic hardware counters") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOVJack Morgenstein
When sending QP1 MAD packets which use a GRH, the source GID (which consists of the 64-bit subnet prefix, and the 64 bit port GUID) must be included in the packet GRH. For SR-IOV, a GID cache is used, since the source GID needs to be the slave's source GID, and not the Hypervisor's GID. This cache also included a subnet_prefix. Unfortunately, the subnet_prefix field in the cache was never initialized (to the default subnet prefix 0xfe80::0). As a result, this field remained all zeroes. Therefore, when SR-IOV was active, all QP1 packets which included a GRH had a source GID subnet prefix of all-zeroes. However, the subnet-prefix should initially be 0xfe80::0 (the default subnet prefix). In addition, if OpenSM modifies a port's subnet prefix, the new subnet prefix must be used in the GRH when sending QP1 packets. To fix this we now initialize the subnet prefix in the SR-IOV GID cache to the default subnet prefix. We update the cached value if/when OpenSM modifies the port's subnet prefix. We take this cached value when sending QP1 packets when SR-IOV is active. Note that the value is stored as an atomic64. This eliminates any need for locking when the subnet prefix is being updated. Note also that we depend on the FW generating the "port management change" event for tracking subnet-prefix changes performed by OpenSM. If running early FW (before 2.9.4630), subnet prefix changes will not be tracked (but the default subnet prefix still will be stored in the cache; therefore users who do not modify the subnet prefix will not have a problem). IF there is a need for such tracking also for early FW, we will add that capability in a subsequent patch. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Fix code indentation in QP1 MAD flowJack Morgenstein
The indentation in the QP1 GRH flow in procedure build_mlx_header is really confusing. Fix it, in preparation for a commit which touches this code. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOVAlex Vesker
Because of an incorrect bit-masking done on the join state bits, when handling a join request we failed to detect a difference between the group join state and the request join state when joining as send only full member (0x8). This caused the MC join request not to be sent. This issue is relevant only when SRIOV is enabled and SM supports send only full member. This fix separates scope bits and join states bits a nibble each. Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/ipoib: Don't allow MC joins during light MC flushAlex Vesker
This fix solves a race between light flush and on the fly joins. Light flush doesn't set the device to down and unset IPOIB_OPER_UP flag, this means that if while flushing we have a MC join in progress and the QP was attached to BC MGID we can have a mismatches when re-attaching a QP to the BC MGID. The light flush would set the broadcast group to NULL causing an on the fly join to rejoin and reattach to the BC MCG as well as adding the BC MGID to the multicast list. The flush process would later on remove the BC MGID and detach it from the QP. On the next flush the BC MGID is present in the multicast list but not found when trying to detach it because of the previous double attach and single detach. [18332.714265] ------------[ cut here ]------------ [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core] ... [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 [18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000 [18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300 [18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280 [18332.796199] Call Trace: [18332.798015] [<ffffffff813fed47>] dump_stack+0x63/0x8c [18332.801831] [<ffffffff8109add1>] __warn+0xd1/0xf0 [18332.805403] [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20 [18332.809706] [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core] [18332.814384] [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib] [18332.820031] [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib] [18332.825220] [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib] [18332.830290] [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib] [18332.834911] [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0 [18332.839741] [<ffffffff81772bd1>] rollback_registered+0x31/0x40 [18332.844091] [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80 [18332.848880] [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib] [18332.853848] [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib] [18332.858474] [<ffffffff81520c08>] dev_attr_store+0x18/0x30 [18332.862510] [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50 [18332.866349] [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170 [18332.870471] [<ffffffff81207198>] __vfs_write+0x28/0xe0 [18332.874152] [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50 [18332.878274] [<ffffffff81208062>] vfs_write+0xa2/0x1a0 [18332.881896] [<ffffffff812093a6>] SyS_write+0x46/0xa0 [18332.885632] [<ffffffff810039b7>] do_syscall_64+0x57/0xb0 [18332.889709] [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25 [18332.894727] ---[ end trace 09ebbe31f831ef17 ]--- Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: fix GFP_KERNEL in spinlock contextAlexey Khoroshilov
There is skb_clone(skb, GFP_KERNEL) in spinlock context in rxe_rcv_mcast_pkt(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16Merge tag 'usb-serial-4.8-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.8-rc7 Here's another Infineon flashloader device id. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-09-16USB: change bInterval default to 10 msAlan Stern
Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Wade Berrier <wberrier@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16usb: musb: Fix tusb6010 compile error on blackfinTony Lindgren
We have CONFIG_BLACKFIN ifdef redefining all musb registers in musb_regs.h and tusb6010.h is never included causing a build error with blackfin-allmodconfig and COMPILE_TEST. Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN is selected. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16PM / runtime: Use _rcuidle for runtime suspend tracepointsPaul E. McKenney
Further testing with false negatives suppressed by commit 293e2421fe25 ("rcu: Remove superfluous versions of rcu_read_lock_sched_held()") identified a few more unprotected uses of RCU from the idle loop. Because RCU actively ignores idle-loop code (for energy-efficiency reasons, among other things), using RCU from the idle loop can result in too-short grace periods, in turn resulting in arbitrary misbehavior. The affected function is rpm_suspend(). The resulting lockdep-RCU splat is as follows: ------------------------------------------------------------------------ Warning from omap3 =============================== [ INFO: suspicious RCU usage. ] 4.6.0-rc5-next-20160426+ #1112 Not tainted ------------------------------- include/trace/events/rpm.h:63 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052ee24>] __pm_runtime_suspend+0x54/0x84 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1112 Hardware name: Generic OMAP36xx (Flattened Device Tree) [<c0110308>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) [<c010c3a8>] (show_stack) from [<c047fec8>] (dump_stack+0xb0/0xe4) [<c047fec8>] (dump_stack) from [<c052d7b4>] (rpm_suspend+0x604/0x7e4) [<c052d7b4>] (rpm_suspend) from [<c052ee34>] (__pm_runtime_suspend+0x64/0x84) [<c052ee34>] (__pm_runtime_suspend) from [<c04bf3bc>] (omap2_gpio_prepare_for_idle+0x5c/0x70) [<c04bf3bc>] (omap2_gpio_prepare_for_idle) from [<c01255e8>] (omap_sram_idle+0x140/0x244) [<c01255e8>] (omap_sram_idle) from [<c0126b48>] (omap3_enter_idle_bm+0xfc/0x1ec) [<c0126b48>] (omap3_enter_idle_bm) from [<c0601db8>] (cpuidle_enter_state+0x80/0x3d4) [<c0601db8>] (cpuidle_enter_state) from [<c0183c74>] (cpu_startup_entry+0x198/0x3a0) [<c0183c74>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) ------------------------------------------------------------------------ Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes for the current series in the realm of block. Like the previous pull request, the meat of it are fixes for the nvme fabrics/target code. Outside of that, just one fix from Gabriel for not doing a queue suspend if we didn't get the admin queue setup in the first place" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-rdma: add back dependency on CONFIG_BLOCK nvme-rdma: fix null pointer dereference on req->mr nvme-rdma: use ib_client API to detect device removal nvme-rdma: add DELETING queue flag nvme/quirk: Add a delay before checking device ready for memblaze device nvme: Don't suspend admin queue that wasn't created nvme-rdma: destroy nvme queue rdma resources on connect failure nvme_rdma: keep a ref on the ctrl during delete/flush iw_cxgb4: block module unload until all ep resources are released iw_cxgb4: call dev_put() on l2t allocation failure
2016-09-14Merge tag 'pci-v4.8-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are two changes for v4.8. The first fixes a "[Firmware Bug]: reg 0x10: invalid BAR (can't size)" warning on Haswell, and the second fixes a problem in some new runtime suspend functionality we merged for v4.8. Summary: Enumeration: Mark Haswell Power Control Unit as having non-compliant BARs (Bjorn Helgaas) Power management: Fix bridge_d3 update on device removal (Lukas Wunner)" * tag 'pci-v4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Fix bridge_d3 update on device removal PCI: Mark Haswell Power Control Unit as having non-compliant BARs
2016-09-14mmc: omap: Initialize dma_slave_config to avoid random data in it's fieldsPeter Ujfalusi
It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-14mmc: omap_hsmmc: Initialize dma_slave_config to avoid random dataPeter Ujfalusi
It is wrong to use uninitialized dma_slave_config and configure only certain fields as the DMAengine driver might look at non initialized (random data) fields and tries to interpret it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-14drm/i915: Ignore OpRegion panel type except on select machinesVille Syrjälä
Turns out commit a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details") has regressed quite a few machines. So it looks like we can't use the panel type from OpRegion on all systems, and yet we absolutely must use it on some specific systems. Despite trying, I was unable to find any automagic way to determine if the OpRegion panel type is respectable or not. The only glimmer of hope I had was bit 8 in the SCIC response, but that turned out to not work either (it was always 0 on both types of systems). So, to fix the regressions without breaking the machine we know to need the OpRegion panel type, let's just add a quirk for this. Only specific machines known to require the OpRegion panel type will therefore use it. Everyone else will fall bck to the VBT panel type. The only known machine so far is a "Conrac GmbH IX45GM2". The PCI subsystem ID on this machine is just a generic 8086:2a42, so of no use. Instead we'll go with a DMI match. I suspect we can now also revert commit aeddda06c1a7 ("drm/i915: Ignore panel type from OpRegion on SKL") but let's leave that to a separate patch. v2: Do the DMI match in the opregion code directly, as dev_priv->quirks gets populated too late Cc: Rob Kramer <rob@solution-space.com> Cc: Martin van Es <martin@mrvanes.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Marco Krüger <krgsch@gmail.com> Cc: Sean Greenslade <sean@seangreenslade.com> Cc: Trudy Tective <bertslany@gmail.com> Cc: Robin Müller <rm1990@gmx.de> Cc: Alexander Kobel <a-kobel@a-kobel.de> Cc: Alexey Shumitsky <alexey.shumitsky@gmail.com> Cc: Emil Andersen Lauridsen <mine809@gmail.com> Cc: oceans112@gmail.com Cc: James Hogan <james@albanarts.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org References: https://lists.freedesktop.org/archives/intel-gfx/2016-August/105545.html References: https://lists.freedesktop.org/archives/dri-devel/2016-August/116888.html References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94825 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97060 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97443 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97363 Fixes: a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details") Tested-by: Marco Krüger <krgsch@gmail.com> Tested-by: Alexey Shumitsky <alexey.shumitsky@gmail.com> Tested-by: Sean Greenslade <sean@seangreenslade.com> Tested-by: Emil Andersen Lauridsen <mine809@gmail.com> Tested-by: Robin Müller <rm1990@gmx.de> Tested-by: oceans112@gmail.com Tested-by: Rob Kramer <rob@solution-space.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473758539-21565-1-git-send-email-ville.syrjala@linux.intel.com References: http://patchwork.freedesktop.org/patch/msgid/1473602239-15855-1-git-send-email-adrienverge@gmail.com Acked-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit c8ebfad7a063fe665417fa0eeb0da7cfe987d8ed) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-09-14Revert "drm/i915/psr: Make idle_frames sensible again"Rodrigo Vivi
This reverts commit 1c80c25fb622973dd135878e98d172be20859049 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed May 18 18:47:12 2016 +0200 drm/i915/psr: Make idle_frames sensible again There are panels that needs 4 idle frames before entering PSR, but VBT is unproperly set. Also lately it was identified that idle frame count calculated at HW can be off by 1, what makes the minimum of 2, at least. Without the current vbt+1 we are with the risk of having HW calculating 0 idle frames and entering PSR when it shouldn't. Regardless the lack of link training. [Jani: there is some disagreement on the explanation, but the commit regresses so revert it is.] References: http://marc.info/?i=20160904191153.GA2328@light.dominikbrodowski.net Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 1c80c25fb622 ("drm/i915/psr: Make idle_frames sensible again") Cc: drm-intel-fixes@lists.freedesktop.org # v4.8-rc1+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473295351-8766-1-git-send-email-rodrigo.vivi@intel.com (cherry picked from commit 40918e0bb81be02f507a941f8b2741f0dc1771b0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-09-14drm/i915: Restore lost "Initialized i915" welcome messageChris Wilson
A side effect of removing the midlayer from driver loading was the loss of a useful message announcing to userspace that i915 had successfully started, e.g.: [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0 Reported-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 8f460e2c78f2 ("drm/i915: Demidlayer driver loading") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20160825072314.17402-1-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit bc5ca47c0af4f949ba889e666b7da65569e36093) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-09-13PCI: Fix bridge_d3 update on device removalLukas Wunner
Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the port itself and its children satisfy a number of conditions. Once a child is removed, we recheck those conditions in case the removed device was blocking the port from suspending. The rechecking needs to happen *after* the device has been removed from the bus it resides on. Otherwise when walking the port's subordinate bus in pci_bridge_d3_update(), the device being removed would erroneously still be taken into account. However the device is removed from the bus_list in pci_destroy_dev() and we currently recheck *before* that. Fix it. Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <mika.westerberg@linux.intel.com>
2016-09-13Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "This contains a Xen fix, an arm64 fix and a race condition / robustization set of fixes related to ExitBootServices() usage and boundary conditions" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Use efi_exit_boot_services() efi/libstub: Use efi_exit_boot_services() in FDT efi/libstub: Introduce ExitBootServices helper efi/libstub: Allocate headspace in efi_get_memory_map() efi: Fix handling error value in fdt_find_uefi_params efi: Make for_each_efi_memory_desc_in_map() cope with running on Xen
2016-09-13Merge tag 'md/4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds
Pull MD fixes from Shaohua Li: "A few bug fixes for MD: - Guoqing fixed a bug compiling md-cluster in kernel - I fixed a potential deadlock in raid5-cache superblock write, a hang in raid5 reshape resume and a race condition introduced in rc4" * tag 'md/4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid5: fix a small race condition md-cluster: make md-cluster also can work when compiled into kernel raid5: guarantee enough stripes to avoid reshape hang raid5-cache: fix a deadlock in superblock write
2016-09-13irqchip/atmel-aic: Fix potential deadlock in ->xlate()Boris Brezillon
aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip lock without disabling interrupts, which can lead to a deadlock if an interrupt occurs while the lock is held in one of these functions. Replace irq_gc_{lock,unlock}() calls by irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from happening. Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-13Merge branch 'nvmf-4.8-rc' of git://git.infradead.org/nvme-fabrics into ↵Jens Axboe
for-linus Sagi writes: Here we have: - Kconfig dependencies fix from Arnd - nvme-rdma device removal fixes from Steve - possible bad deref fix from Colin
2016-09-13Merge tag 'drm/atmel-hlcdc/4.8-fixes' of github.com:bbrezillon/linux-at91 ↵Dave Airlie
into drm-fixes Two fixes for 4.8: - missing static specifier on atmel_hlcdc_crtc_reset() - bug in the hardware scaling logic * tag 'drm/atmel-hlcdc/4.8-fixes' of github.com:bbrezillon/linux-at91: drm/atmel-hlcdc: Make ->reset() implementation static drm: atmel-hlcdc: Fix vertical scaling
2016-09-13Merge tag 'drm-intel-fixes-2016-09-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes from Jani. * tag 'drm-intel-fixes-2016-09-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB drm/i915: disable 48bit full PPGTT when vGPU is active drm/i915: enable vGPU detection for all drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
generated by cgit (git 2.34.1) at 2024-07-02 23:16:50 +0000