summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-09-26net: stmmac: add Amlogic Meson glue layerBeniamino Galvani
The Ethernet controller available in Meson6 and Meson8 SoCs is a Synopsys DesignWare MAC IP core, already supported by the stmmac driver. This glue layer implements some platform-specific settings needed by the Amlogic variant. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Here is a quick pull request primarily meant to address the deconfig fallout from changing SCSI_NETLINK from being used via 'select' to being used via 'depends'. I applied a set of 5 patches written by Michal Marek, and then I carefully audited all of the remaining config files, basically: 1) I scanned every arch config file, and if it mentioned CONFIG_INET or CONFIG_UNIX, I made sure it had CONFIG_NET=y 2) After that, I scanned every arch config file, and if it did not have CONFIG_NET=y I made sure it did not reference any networking config options. Finally, we have some late breaking wireless fixes in here from John Linville and co" [ And there's a sparc bpf fix snuck in too ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sparc: bpf_jit: fix loads from negative offsets parisc: Update defconfigs which were missing CONFIG_NET. powerpc: Update defconfigs which were missing CONFIG_NET. s390: Update defconfigs which were missing CONFIG_NET. mips: Update some more defconfigs which were missing CONFIG_NET. sparc: Set CONFIG_NET=y in defconfigs sh: Set CONFIG_NET=y in defconfigs powerpc: Set CONFIG_NET=y in defconfigs parisc: Set CONFIG_NET=y in defconfigs mips: Set CONFIG_NET=y in defconfigs brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels() ath9k: Fix NULL pointer dereference on early irq net: rfkill: gpio: Fix clock status NFC: st21nfca: Fix potential depmod dependency cycle NFC: st21nfcb: Fix depmod dependency cycle NFC: microread: Potential overflows in microread_target_discovered()
2014-09-24Merge tag 'master-2014-09-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-09-23 Please consider pulling this one last batch of fixes intended for the 3.17 stream! For the NFC bits, Samuel says: "Hopefully not too late for a handful of NFC fixes: - 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a depmod dependenyc cycle. - One potential buffer overflow in the microread driver." On top of that... Emil Goode provides a fix for a brcmfmac off-by-one regression which was introduced in the 3.17 cycle. Loic Poulain fixes a polarity mismatch for a variable assignment inside of rfkill-gpio. Wojciech Dubowik prevents a NULL pointer dereference in ath9k. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-24Merge tag 'pci-v3.17-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Here are a few fixes that should be in v3.17. - Reverting "Don't scan random busses" covers up a CardBus regression having to do with allocating CardBus bus numbers. - Reverting "Make sure bus numbers stay within parents bounds" covers up an ACPI _CRS bug that makes us reconfigure a bridge, causing a broken device behind it to stop responding. - The pciehp timeout change fixes some code we added in v3.17. Without the fix, we can send a new hotplug command too early, before the timeout has expired. I hope for better fixes for the reverts, but those will have to come after v3.17" * tag 'pci-v3.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: pciehp: Fix pcie_wait_cmd() timeout Revert "PCI: Make sure bus number resources stay within their parents bounds" Revert "PCI: Don't scan random busses in pci_scan_bridge()"
2014-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
Pull crypto fixes from Herbert Xu: "This fixes three issues: - if ccp is loaded on a machine without ccp, it will incorrectly activate causing all requests to fail. Fixed by preventing ccp from loading if hardware isn't available. - not all IRQs were enabled for the qat driver, leading to potential stalls when it is used - disabled buggy AVX CTR implementation in aesni" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni - disable "by8" AVX CTR optimization crypto: ccp - Check for CCP before registering crypto algs crypto: qat - Enable all 32 IRQs
2014-09-24Merge tag 'media/v3.17-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "For some last time fixes: - a regression detected on Kernel 3.16 related to VBI Teletext application breakage on drivers using videobuf2 (see https://bugzilla.kernel.org/show_bug.cgi?id=84401). The bug was noticed on saa7134 (migrated to VB2 on 3.16), but also affects em28xx (migrated on 3.9 to VB2); - two additional sanity checks at videobuf2; - two fixups to restore proper VBI support at the em28xx driver; - two Kernel oops fixups (at cx24123 and cx2341x drivers); - a bug at adv7604 where an if was doing just the opposite as it would be expected; - some documentation fixups to match the behavior defined at the Kernel" * tag 'media/v3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] em28xx-v4l: get rid of field "users" in struct em28xx_v4l2" [media] em28xx: fix VBI handling logic [media] DocBook media: improve the poll() documentation [media] DocBook media: fix the poll() 'no QBUF' documentation [media] vb2: fix VBI/poll regression [media] cx2341x: fix kernel oops [media] cx24123: fix kernel oops due to missing parent pointer [media] adv7604: fix inverted condition [media] media/radio: fix radio-miropcm20.c build with io.h header file [media] vb2: fix plane index sanity check in vb2_plane_cookie() [media] DocBook media: update version number and V4L2 changes [media] DocBook media: fix fieldname in struct v4l2_subdev_selection [media] vb2: fix vb2 state check when start_streaming fails [media] videobuf2-core.h: fix comment [media] videobuf2-core: add comments before the WARN_ON [media] videobuf2-dma-sg: fix for wrong GFP mask to sg_alloc_table_from_pages
2014-09-24Merge tag 'md/3.17-more-fixes' of git://git.neil.brown.name/mdLinus Torvalds
Pull bugfixes for md/raid1 from Neil Brown: "It is amazing how much easier it is to find bugs when you know one is there. Two bug reports resulted in finding 7 bugs! All are tagged for -stable. Those that can't cause (rare) data corruption, cause lockups. Particularly, but not only, fixing new "resync" code" * tag 'md/3.17-more-fixes' of git://git.neil.brown.name/md: md/raid1: fix_read_error should act on all non-faulty devices. md/raid1: count resync requests in nr_pending. md/raid1: update next_resync under resync_lock. md/raid1: Don't use next_resync to determine how far resync has progressed md/raid1: make sure resync waits for conflicting writes to complete. md/raid1: clean up request counts properly in close_sync() md/raid1: be more cautious where we read-balance during resync. md/raid1: intialise start_next_window for READ case to avoid hang
2014-09-24crypto: ccp - Check for CCP before registering crypto algsTom Lendacky
If the ccp is built as a built-in module, then ccp-crypto (whether built as a module or a built-in module) will be able to load and it will register its crypto algorithms. If the system does not have a CCP this will result in -ENODEV being returned whenever a command is attempted to be queued by the registered crypto algorithms. Add an API, ccp_present(), that checks for the presence of a CCP on the system. The ccp-crypto module can use this to determine if it should register it's crypto alogorithms. Cc: stable@vger.kernel.org Reported-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Tested-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-09-23Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: "Last late set of InfiniBand/RDMA fixes for 3.17: - fixes for the new memory region re-registration support - iSER initiator error path fixes - grab bag of small fixes for the qib and ocrdma hardware drivers - larger set of fixes for mlx4, especially in RoCE mode" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/mlx4: Fix VF mac handling in RoCE IB/mlx4: Do not allow APM under RoCE IB/mlx4: Don't update QP1 in native mode IB/mlx4: Avoid accessing netdevice when building RoCE qp1 header mlx4: Fix mlx4 reg/unreg mac to work properly with 0-mac addresses IB/core: When marshaling uverbs path, clear unused fields IB/mlx4: Avoid executing gid task when device is being removed IB/mlx4: Fix lockdep splat for the iboe lock IB/mlx4: Get upper dev addresses as RoCE GIDs when port comes up IB/mlx4: Reorder steps in RoCE GID table initialization IB/mlx4: Don't duplicate the default RoCE GID IB/mlx4: Avoid null pointer dereference in mlx4_ib_scan_netdevs() IB/iser: Bump version to 1.4.1 IB/iser: Allow bind only when connection state is UP IB/iser: Fix RX/TX CQ resource leak on error flow RDMA/ocrdma: Use right macro in query AH RDMA/ocrdma: Resolve L2 address when creating user AH mlx4: Correct error flows in rereg_mr IB/qib: Correct reference counting in debugfs qp_stats IPoIB: Remove unnecessary port query ...
2014-09-23Merge branch 'parisc-3.17-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "We avoid using -mfast-indirect-calls for 64bit kernel builds to prevent building an unbootable kernel due to latest gcc changes. In the pdc_stable/firmware-access driver we fix a few possible stack overflows and we now call secure_computing_strict() instead of secure_computing() which fixes upcoming SECCOMP patches in the for-next trees" * 'parisc-3.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Only use -mfast-indirect-calls option for 32-bit kernel builds parisc: pdc_stable.c: Avoid potential stack overflows parisc: pdc_stable.c: Cleaning up unnecessary use of memset in conjunction with strncpy parisc: ptrace: use secure_computing_strict()
2014-09-23vxlan: Fix bug introduced by commit acbf74a76300Andy Zhou
Commit acbf74a76300 ("vxlan: Refactor vxlan driver to make use of the common UDP tunnel functions." introduced a bug in vxlan_xmit_one() function, causing it to transmit Vxlan packets without proper Vxlan header inserted. The change was not needed in the first place. Revert it. Reported-by: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix a resource leak in tmp103 driver - Add support for two more processors to fam15h_power driver - Also fix a bug in the same driver to only report the power level on chips which actually support reporting it * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (tmp103) Fix resource leak bug in tmp103 temperature sensor driver hwmon: (fam15h_power) Add support for two more processors hwmon: (fam15h_power) Make actual power reporting conditional
2014-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels()Emil Goode
In the brcmf_count_20mhz_channels function we are looping through a list of channels received from firmware. Since the index of the first channel is 0 the condition leads to an off by one bug. This is causing us to hit the WARN_ON_ONCE(1) calls in the brcmu_d11n_decchspec function, which is how I discovered the bug. Introduced by: commit b48d891676f756d48b4d0ee131e4a7a5d43ca417 ("brcmfmac: rework wiphy structure setup") Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-22PCI: pciehp: Fix pcie_wait_cmd() timeoutYinghai Lu
pcie_poll_cmd() take msecs instead of jiffies, so convert timeout to msecs. Fixes: 40b960831cfa ("PCI: pciehp: Compute timeout from hotplug command start time") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) If the user gives us a msg_namelen of 0, don't try to interpret anything pointed to by msg_name. From Ani Sinha. 2) Fix some bnx2i/bnx2fc randconfig compilation errors. The gist of the issue is that we firstly have drivers that span both SCSI and networking. And at the top of that chain of dependencies we have things like SCSI_FC_ATTRS and SCSI_NETLINK which are selected. But since select is a sledgehammer and ignores dependencies, everything to select's SCSI_FC_ATTRS and/or SCSI_NETLINK has to also explicitly select their dependencies and so on and so forth. Generally speaking 'select' is supposed to only be used for child nodes, those which have no dependencies of their own. And this whole chain of dependencies in the scsi layer violates that rather strongly. So just make SCSI_NETLINK depend upon it's dependencies, and so on and so forth for the things selecting it (either directly or indirectly). From Anish Bhatt and Randy Dunlap. 3) Fix generation of blackhole routes in IPSEC, from Steffen Klassert. 4) Actually notice netdev feature changes in rtl_open() code, from Hayes Wang. 5) Fix divide by zero in bond enslaving, from Nikolay Aleksandrov. 6) Missing memory barrier in sunvnet driver, from David Stevens. 7) Don't leave anycast addresses around when ipv6 interface is destroyed, from Sabrina Dubroca. 8) Don't call efx_{arch}_filter_sync_rx_mode before addr_list_lock is initialized in SFC driver, from Edward Cree. 9) Fix missing DMA error checking in 3c59x, from Neal Horman. 10) Openvswitch doesn't emit OVS_FLOW_CMD_NEW notifications accidently, fix from Samuel Gauthier. 11) pch_gbe needs to select NET_PTP_CLASSIFY otherwise we can get a build error. 12) Fix macvlan regression wherein we stopped emitting broadcast/multicast frames over software devices. From Nicolas Dichtel. 13) Fix infiniband bug due to unintended overflow of skb->cb[], from Eric Dumazet. And add an assertion so this doesn't happen again. 14) dm9000_parse_dt() should return error pointers, not NULL. From Tobias Klauser. 15) IP tunneling code uses this_cpu_ptr() in preemptible contexts, fix from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dma net: bcmgenet: fix TX reclaim accounting for fragments ipv4: do not use this_cpu_ptr() in preemptible context dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt() r8169: fix an if condition r8152: disable ALDPS ipoib: validate struct ipoib_cb size net: sched: shrink struct qdisc_skb_cb to 28 bytes tg3: Work around HW/FW limitations with vlan encapsulated frames macvlan: allow to enqueue broadcast pkt on virtual device pch_gbe: 'select' NET_PTP_CLASSIFY. scsi: Use 'depends' with LIBFC instead of 'select'. openvswitch: restore OVS_FLOW_CMD_NEW notifications genetlink: add function genl_has_listeners() lib: rhashtable: remove second linux/log2.h inclusion net: allow macvlans to move to net namespace 3c59x: Fix bad offset spec in skb_frag_dma_map 3c59x: Add dma error checking and recovery sparc: bpf_jit: fix support for ldx/stx mem and SKF_AD_VLAN_TAG can: at91_can: add missing prepare and unprepare of the clock ...
2014-09-22Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock layer fixes from Mike Turquette: "The fixes for the clock tree are mostly run-time bugs in clock drivers. The fixes for TI DRA7 remove divide-by-zero errors. The recently merged AT91 clock driver fixes some bad error checking and the QCOM driver fix restores audio for that platform, a clear regression. A list iteration bug in the framework core was hit recently and is fixed up here. Finally a compilation warning is fixed for efm32gg, which is also a regression fix" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk/efm32gg: fix dt init prototype clk: prevent erronous parsing of children during rate change clk: rockchip: Fix the clocks for i2c1 and i2c2 clk: qcom: Fix sdc 144kHz frequency entry clk: at91: fix num_parents test in at91sam9260 slow clk implementation clk: ti: dra7-atl: Provide error check for incoming parameters in set_rate clk: ti: divider: Provide error check for incoming parameters in set_rate
2014-09-22net: bcmgenet: call bcmgenet_dma_teardown in bcmgenet_fini_dmaFlorian Fainelli
We should not be manipulaging the DMA_CTRL registers directly by writing 0 to them to disable DMA. This is an operation that needs to be timed to make sure the DMA engines have been properly stopped since their state machine stops on a packet boundary, not immediately. Make sure that tha bcmgenet_fini_dma() calls bcmgenet_dma_teardown() to ensure a proper DMA engine state. As a result, we need to reorder the function bodies to resolve the use dependency. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: bcmgenet: fix TX reclaim accounting for fragmentsFlorian Fainelli
The GENET driver supports SKB fragments, and succeeds in transmitting them properly, but when reclaiming these transmitted fragments, we will only update the count of free buffer descriptors by 1, even for SKBs with fragments. This leads to the networking stack thinking it has more room than the hardware has when pushing new SKBs, and backing off consequently because we return NETDEV_TX_BUSY. Fix this by accounting for the SKB nr_frags plus one (itself) and update ring->free_bds accordingly with that value for each iteration loop in __bcmgenet_tx_reclaim(). Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt()Tobias Klauser
In one error condition dm9000_parse_dt() returns NULL, however the return value is checked using IS_ERR() in dm9000_probe(), leading to the error not being properly propagated if CONFIG_OF is not enabled or the device tree data is not available. Fix this by also returning an ERR_PTR() in this case. Fixes: 0b8bf1baabe5 (net: dm9000: Allow instantiation using device tree) Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22ath9k: Fix NULL pointer dereference on early irqWojciech Dubowik
The ah struct might not have been initialized when interrupt comes so check for it. Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-22Merge tag 'nfc-fixes-3.17-1' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixes Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.17 fixes We have 3 NFC fixes for 3.17: - 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a depmod dependenyc cycle. - One potential buffer overflow in the microread driver." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-22bonding: remove the unnecessary notes for bond_xmit_broadcast()dingtianhong
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22bonding: slight optimization for bond_xmit_roundrobin()dingtianhong
When the slave is the curr_active_slave, no need to check whether the slave is active or not, it is always active. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22r8169: fix an if conditionDan Carpenter
There is an extra semi-colon so __rtl8169_set_features() is called every time. Fixes: 929a031dfd62 ('r8169: adjust __rtl8169_set_features') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Hayes Wang <hayeswang@realtek.com>-- Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: fix alignment on line wrapKalesh AP
This patch fixes alignment whereever it doesn't match the open parenthesis alignment. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove multiple assignments on a single lineKalesh AP
This patch removes multiple assignments on a single line as warned by checkpatch. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove space after typecastsKalesh AP
This patch removes unnecessary spaces after typecasts as per checkpatch warnings. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove unnecessary blank lines after an open braceKalesh AP
This patch fixes checkpatch warnings about blank lines after an open brace '{'. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: insert a blank line after function/struct//enum definitionsKalesh AP
This patch inserts a blank line after function/struct/union/enum definitions as per checkpatch warnings. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove multiple blank linesKalesh AP
This patch removes multiple blank lines in the driver as per checkpatch warnings. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: add blank line after declarationsKalesh AP
This patch fixes checkpatch warnings in be2net by adding a blank line between declaration and code blocks. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: remove return statements for void functionsKalesh AP
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: add speed reporting for 20G-KR interfaceVasundhara Volam
This patch adds speed reporting via ethtool for 20G KR2 interface on the Skyhawk-R chip. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: add speed reporting for 40G/KR interfaceKalesh AP
This patch adds speed reporting via ethtool for 40Gbps KR4 interface on the Skyhawk-R chip. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: fix sparse warnings in be_cmd_req_port_type{}Suresh Reddy
This patch fixes a sprase warnings regarding endian declarations introduced by the following commit: fixes: e36edd9 ("be2net: add ethtool "-m" option support") Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22be2net: fix a sparse warning in be_cmd_modify_eqd()Kalesh AP
This patch fixes a sparse warning about missing static declaration that was introduced by the following commit: fixes: 936767039cdf ("be2net: send a max of 8 EQs to be_cmd_modify_eqd() on Lancer") Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22r8152: disable ALDPShayeswang
If the hw is in ALDPS mode, the hw may have no response for accessing the most registers. Therefore, the ALDPS should be disabled before accessing the hw in rtl_ops.init(), rtl_ops.disable(), rtl_ops.up(), and rtl_ops.down(). Regardless of rtl_ops.enable(), because the hw wouldn't enter ALDPS mode when linking on. The hw would enter the ALDPS mode after several seconds when link down occurs and the ALDPS is enabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: fec: fix code identationNimrod Andy
There have extra identation before .skb_copy_to_linear_data_offset(), this patch just remove the identation. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: dsa: bcm_sf2: add support for Wake-on-LANFlorian Fainelli
In order for Wake-on-LAN to work properly, we query the parent network device Wake-on-LAN features and advertise those. Similarly, when configuring Wake-on-LAN on a per-port network interface, we make sure that we do not accept something the master network devices does not support. Finally, we need to maintain a bitmask of the ports enabled for Wake-on-LAN to prevent the suspend() callback from disabling a port that is used for waking up the system. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22net: dsa: bcm_sf2: add suspend/resume callbacksFlorian Fainelli
Implement the suspend/resume callbacks for the Broadcom Starfighter 2 switch driver. Suspending the switch requires masking interrupts and shutting down ports. Resuming the switch requires a software reset since we do not know which power-sate we might be coming from, and re-enabling the physical ports that are used. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22qlge: Fix compilation warningHarish Patil
Fix the below warning message: qlge_main.c:1754: warning: 'lbq_desc' may be used uninitialized in this function Signed-off-by: Harish Patil <harish.patil@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22ipoib: validate struct ipoib_cb sizeEric Dumazet
To catch future errors sooner. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22am2150: Update nmclan_cs.c to use update PCMCIA APIJeff Kirsher
Resolves compile warning about use of a deprecated function call: drivers/net/ethernet/amd/nmclan_cs.c: In function ‘nmclan_config’: drivers/net/ethernet/amd/nmclan_cs.c:624:3: warning: ‘pcmcia_request_exclusive_irq’ is deprecated (declared at include/pcmcia/ds.h:213) [-Wdeprecated-declarations] ret = pcmcia_request_exclusive_irq(link, mace_interrupt); Updates pcmcia_request_exclusive_irq() to pcmcia_request_irq(). CC: Roger Pao <rpao@paonet.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22tg3: Work around HW/FW limitations with vlan encapsulated framesVlad Yasevich
TG3 appears to have an issue performing TSO and checksum offloading correclty when the frame has been vlan encapsulated (non-accelrated). In these cases, tcp checksum is not correctly updated. This patch attempts to work around this issue. After the patch, 802.1ad vlans start working correctly over tg3 devices. CC: Prashant Sreedharan <prashant@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22hwmon: (tmp103) Fix resource leak bug in tmp103 temperature sensor driversundarjdev
tmp103 temperature sensor driver registers with the hwmon framework by calling hwmon_device_register_with_groups but does not have a .remove method to call hwmon_device_unregister to unregister from the framework when the device is no longer needed. Fix this by calling devm_hwmon_device_register_with_groups. Signed-off-by: Sundar J Dev <sundarjayakumardev@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-09-22macvlan: allow to enqueue broadcast pkt on virtual deviceNicolas Dichtel
Since commit 412ca1550cbe ("macvlan: Move broadcasts into a work queue"), the driver uses tx_queue_len of the master device as the limit of packets enqueuing. Problem is that virtual drivers have this value set to 0, thus all broadcast packets were rejected. Because tx_queue_len was arbitrarily chosen, I replace it with a static limit of 1000 (also arbitrarily chosen). CC: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Thibaut Collet <thibaut.collet@6wind.com> Suggested-by: Thibaut Collet <thibaut.collet@6wind.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22pch_gbe: 'select' NET_PTP_CLASSIFY.David S. Miller
Fixes the following randconfig build failure: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c: In function > ‘pch_ptp_match’: > drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c:130:2: error: > implicit declaration of function ‘ptp_classify_raw’ > [-Werror=implicit-function-declaration] > if (ptp_classify_raw(skb) == PTP_CLASS_NONE) > ^ > cc1: some warnings being treated as errors > make[5]: *** [drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.o] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22scsi: Use 'depends' with LIBFC instead of 'select'.David S. Miller
LIBFC depends upon SCSI_FC_ATTRS and select's CRC32C. The only alternative would be to 'select' CRC32C and all of SCSI_FC_ATTRS direct and indirect dependencies in the Kconfig section for every LIBFCOE user which makes little sense. Subsequently, use 'depends' instead of 'select' for LIBFCOE too. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-05-22 10:50:24 +0000