summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-08-28Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: s5pv210: Remove spurious __init annotation cpufreq: intel_pstate: Add CPU ID for Braswell processor intel_pstate: Turn per cpu printk into pr_debug
2014-08-28cpufreq: s5pv210: Remove spurious __init annotationMark Brown
Since this is a platform driver and can be probed at any time we can't annotate funtions in the probe path as __init, the code can't safely be discarded at the end of kernel init. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-27phy: fix EEE checks inside the phy_init_eee.Giuseppe CAVALLARO
According to the Std 802.3az if the EEE Adv (Reg 7.60), Link partner ability (Reg 7.61) and EEE capability (Register 3.20) bits return 0 this means no EEE is supported. So this patch fixes the checks inside the phy_init_eee function. Signed-off-by: Nandini Sharma <nandini.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28Merge branches 'acpi-scan', 'acpi-ec' and 'acpi-lpss'Rafael J. Wysocki
* acpi-scan: ACPI: Run fixed event device notifications in process context ACPI / scan: Allow ACPI drivers to bind to PNP device objects * acpi-ec: ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC ACPI / EC: Add support to disallow QR_EC to be issued when SCI_EVT isn't set * acpi-lpss: ACPI / LPSS: Add ACPI IDs for Intel Braswell
2014-08-28cpufreq: intel_pstate: Add CPU ID for Braswell processorMika Westerberg
This is pretty much the same as Intel Baytrail, only the CPU ID is different. Add the new ID to the supported CPU list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-28intel_pstate: Turn per cpu printk into pr_debugAndi Kleen
On larger systems intel_pstate currently spams the boot up log with its "Intel pstate controlling ..." message for each CPU. It's the only subsystem that prints a message for each CPU. Turn the message into a pr_debug. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-27Revert "usb: ehci/ohci-exynos: Fix PHY getting sequence"Greg Kroah-Hartman
This reverts commit 039368901ad0a6476c7ecf0cfe4f84d735e30135. Vivek writes: We not longer need this patch, since we have planned to remove the usb-phy drivers for samsung [1], we have completely deleted the support for the the same from ohci-exynos and ehci-exynos drivers too [2]. Sorry for the confusion, but this patch can be dropped and instead we can pick the patches in [2]. [1] http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35774.html [2] https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35695.html https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg35696.html Cc: Sachin Kamat <sachin.kamat@samsung.com> Cc: Vivek Gautam <gautam.vivek@samsung.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Sachin Kamat <sachin.kamat@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27radeon: Test for PCI root bus before assuming bus->selfAlex Williamson
If we assign a Radeon device to a virtual machine, we can no longer assume a fixed hardware topology, like the GPU having a parent device. This patch simply adds a few pci_is_root_bus() tests to avoid passing a NULL pointer to PCI access functions, allowing the radeon driver to work in a QEMU 440FX machine with an assigned HD8570 on the emulated PCI root bus. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-27xhci: Disable streams on Via XHCI with device-id 0x3432Hans de Goede
This is a bit bigger hammer then I would like to use for this, but for now it will have to make do. I'm working on getting my hands on one of these so that I can try to get streams to work (with a quirk flag if necessary) and then we can re-enable them. For now this at least makes uas capable disk enclosures work again by forcing fallback to the usb-storage driver. https://bugzilla.kernel.org/show_bug.cgi?id=79511 Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27USB: serial: fix potential heap buffer overflowJohan Hovold
Make sure to verify the number of ports requested by subdriver to avoid writing beyond the end of fixed-size array in interface data. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of ports requested by a subdriver (which could have been determined from device descriptors) did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27USB: serial: fix potential stack buffer overflowJohan Hovold
Make sure to verify the maximum number of endpoints per type to avoid writing beyond the end of a stack-allocated array. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of endpoints of a certain type reported by a device did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fixes for potential memory corruption problems in magicmouse and picolcd drivers (the HW would have to be manufactured to be deliberately evil to trigger those) which were found by Steven Vittitoe - fix for false error message appearing in dmesg from logitech-dj driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: picolcd: sanity check report size in raw_event() callback HID: magicmouse: sanity check report size in raw_event() callback HID: logitech-dj: prevent false errors to be shown
2014-08-27spi: dw: fix kernel crash due to NULL pointer dereferenceAndy Shevchenko
The obvious fix after the commit d9c73bb8a3a5 "spi: dw: add support for gpio controlled chip select". This patch fixes the issue by using locally defined temporary variable. Fixes: d9c73bb8a3a5 (spi: dw: add support for gpio controlled chip select) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org>
2014-08-27spi: dw-pci: fix bug when regs left uninitializedAndy Shevchenko
The commit 04f421e7 "spi: dw: use managed resources" changes drivers to use managed functions, but seems wasn't properly tested in PCI case. The regs field of struct dw_spi left uninitialized. Thus, kernel crashes when tries to access to the SPI controller registers. This patch fixes the issue. Fixes: 04f421e7 (spi: dw: use managed resources) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-08-27ARM: 8130/1: cpuidle/cpuidle-big_little: fix reading cpu id part numberJuri Lelli
Commit af040ffc9ba1 ("ARM: make it easier to check the CPU part number correctly") changed ARM_CPU_PART_X masks, and the way they are returned and checked against. Usage of read_cpuid_part_number() is now deprecated, and calling places updated accordingly. This actually broke cpuidle-big_little initialization, as bl_idle_driver_init() performs a check using an hardcoded mask on cpu_id. Create an interface to perform the check (that is now even easier to read). Define also a proper mask (ARM_CPU_PART_MASK) that makes this kind of checks cleaner and helps preventing bugs in the future. Update usage accordingly. Signed-off-by: Juri Lelli <juri.lelli@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-08-27parisc: dino: fix %d confusingly prefixed with 0x in format stringHans Wennborg
Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Helge Deller <deller@gmx.de>
2014-08-27drm/i915: don't warn if backlight unexpectedly enabledScot Doyle
BIOS or firmware can modify hardware state during suspend/resume, for example on the Toshiba CB35 or Lenovo T400, so log a debug message instead of a warning if the backlight is unexpectedly enabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80930 Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-27HID: picolcd: sanity check report size in raw_event() callbackJiri Kosina
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Cc: stable@vger.kernel.org Reported-by: Steven Vittitoe <scvitti@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27HID: magicmouse: sanity check report size in raw_event() callbackJiri Kosina
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Cc: stable@vger.kernel.org Reported-by: Steven Vittitoe <scvitti@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-26usb: ehci/ohci-exynos: Fix PHY getting sequenceVivek Gautam
Since we want to keep support for both older usb-phys as well as the newer generic phys, lets first get the generic PHYs and fallback to older USB-PHYs only when we fail to get the former. This should fix the issue with ehci-exynos and ohci-exynos, wherein in the absence of SAMSUNG_USB2PHY config symbol, we end up getting the NOP_USB_XCEIV phy when the same is enabled. And thus the PHYs are not configured properly. Reported-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Jingoo Han <jg1.han@samsung.com> Tested-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-26usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1Roger Quadros
If user specifies that USB autosuspend must be disabled by module parameter "usbcore.autosuspend=-1" then we must prevent autosuspend of USB hub devices as well. commit 596d789a211d introduced in v3.8 changed the original behaivour and stopped respecting the usbcore.autosuspend parameter for hubs. Fixes: 596d789a211d "USB: set hub's default autosuspend delay as 0" Cc: [3.8+] <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Michael Welling <mwelling@emacinc.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-26Input: elantech - add support for trackpoint found on some v3 modelsUlrik De Bie
Some elantech v3 touchpad equipped laptops also have a trackpoint, before this commit, these give sync errors. With this patch, the trackpoint is provided as another input device: 'Elantech PS/2 TrackPoint' The patch will also output messages that do not follow the expected pattern. In the mean time I've seen 2 unknown packets occasionally: 0x04 , 0x00 , 0x00 , 0x00 , 0x00 , 0x00 0x00 , 0x00 , 0x00 , 0x02 , 0x00 , 0x00 I don't know what those are for, but they can be safely ignored. Currently all packets that are not known to v3 touchpad and where packet[3] (the fourth byte) lowest nibble is 6 are now recognized as PACKET_TRACKPOINT and processed by the new elantech_report_trackpoint. This has been verified to work on a laptop Lenovo L530 where the touchpad/trackpoint combined identify themselves as: psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x350f02) psmouse serio1: elantech: Synaptics capabilities query result 0xb9, 0x15, 0x0c. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: elantech - reset the device when elantech probe failsUlrik De Bie
elantech_init() calls elantech_set_absolute_mode which sets the driver in an absolute mode. When after this the elantech_init fails, it is best to turn the ps/2 mouse emulation mode back on by calling psmouse_reset() so that it can work as a regular mouse. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26Input: ALPS - suppress message about 'Unknown touchpad'Dmitry Torokhov
When we fail to match data returned by E7 and EC reports we state that we found "Unknown ALPS touchpad" whereas it is most likely it is not ALPS touchpad at all. Change wording a bit and reduce the message to debug so that it does not litter users logs and confuse them. Reported-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-26thunderbolt: Clear hops before overwritingAndreas Noever
Zero hops in tb_path_activate before writing a new path. This fixes the following scenario: - Boot with a coldplugged device - Unplug device - Plug device back in - PCI hotplug fails The hotplug operation fails because our new path matches the (now defunct) path which was setup by the firmware for the coldplugged device. By writing zeros before writing our path configuration we can force thunderbolt to retrain the path. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - wire up the system calls seccomp, getrandom and memfd_create - use static system information as input to add_device_randomness - .. and three bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/sclp: remove unnecessary XTABS flag s390/3215: fix tty output containing tabs s390: wire up memfd_create syscall s390: add system information as device randomness s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL s390: wire up seccomp and getrandom syscalls
2014-08-26USB: sisusb: add device id for Magic Control USB videoStephen Hemminger
I have a j5 create (JUA210) USB 2 video device and adding it device id to SIS USB video gets it to work. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-26regmap: Fix handling of volatile registers for format_write() chipsMark Brown
A previous over-zealous factorisation of code means that we only treat registers as volatile if they are readable. For most devices this is fine since normally most registers can be read and volatility implies readability but for format_write() devices where there is no readback from the hardware and we use volatility to mean simply uncacheability this means that we end up treating all registers as cacheble. A bigger refactoring of the code to clarify this is in order but as a fix make a minimal change and only check readability when checking volatility if there is no format_write() operation defined for the device. Signed-off-by: Mark Brown <broonie@linaro.org> Tested-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org
2014-08-26drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2)Alex Deucher
This is a port of cedb655a3a7764c3fd946077944383c9e0e68dd4 to older asics. Fixes a possible divide by 0 if the harvest register is invalid. v2: drop some additional harvest munging. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-08-26drm/radeon: save/restore the PD addr on suspend/resumeChristian König
This fixes a problem with GPU resets and TLB flushes on SI/CIK. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-26ata: ahci_tegra: Read calibration fuseMikko Perttunen
The original version of the driver did not read the SATA calibration fuse to remove the dependency to the fuse driver. The fuse driver is now merged, so add this functionality. The calibration fuse contains a 2-bit value used to pick a set of calibration values for the SATA pad. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26drm/msm: Fix missing unlock on error in msm_fbdev_create()Wei Yongjun
Add the missing unlock before return from function msm_fbdev_create() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26drm/msm: fix compile error for non-dt buildsRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26drm/msm/mdp4: request vblank during modesetRob Clark
This avoids a problem seen with weston (for example) where the display gets stuck in "black screen" if starting weston first thing after boot. Possibly mdp5 needs something similar. The downstream android fbdev driver always requests DMA_E (or DMA_P) when display is active, rather than only enabling it on-demand as the drm driver does, which I believe has the same end result. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26drm/msm: avoid flood of kernel logs on faultsRob Clark
87e956e9 changed the fault handler to return -ENOSYS, which causes the iommu driver to print out a huge splat. Which wouldn't be quite so bad if nothing ever faulted. But seems like some EXA composite operations generate quite a lot of (seemingly harmless) faults. That is probably a userspace problem, but the huge increase in verbosity from iommu fault dumps makes things kind of unusable. We probably should actually log *some* message (not conditional on drm.debug). But ratelimit it. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26video: da8xx-fb: preserve display width when changing HSYNCIan Abbott
When looking at this driver for a client, I noticed the code that configures the HSYNC pulse clobbers the display width in the same register. It only preserves the MS part of the width in bit 3 and zeros the LS part of the width in bits 9 to 4. This doesn't matter during initialization as the width is configured afterwards, but subsequent use of the FBIPUT_HSYNC ioctl would clobber the width. Preserve bits 9 to 0 of LCD_RASTER_TIMING_0_REG when configuring the horizontal sync. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26drm: sti: Add missing dependency on RESET_CONTROLLERJingoo Han
Add missing dependency on RESET_CONTROLLER in order to fix the following build error. drivers/gpu/drm/sti/sti_hdmi.c: In function 'sti_hdmi_probe' drivers/gpu/drm/sti/sti_hdmi.c:780:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] Benjamin Gaignard remark: I have change "depends on" to "select" but keep the original author name. Signed-off-by: Jingoo Han <jg1.han@samsung.com>
2014-08-26drm: sti: Make of_device_id array constKiran Padwal
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
2014-08-26drm: sti: Fix return value check in sti_drm_platform_probe()Wei Yongjun
In case of error, the function platform_device_register_resndata() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-08-26drm: sti: hda: fix return value check in sti_hda_probe()Wei Yongjun
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-08-26drm: sti: hdmi: fix return value check in sti_hdmi_probe()Wei Yongjun
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-08-26drm: sti: tvout: fix return value check in sti_tvout_probe()Wei Yongjun
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-08-26drm/i915: Move intel_ddi_set_vc_payload_alloc(false) to haswell_crtc_disable()Ville Syrjälä
Somehow the intel_ddi_set_vc_payload_alloc(false) call has ended up in ironlake_crtc_disable() rather than haswell_crtc_disable(). Move it to the correct place. intel_ddi_disable_transcoder_func() already disables the vc payload allocation so this doesn't actually do anything more. The spec says we should wait for some kind of ack after frobbing the bit. We don't appear to do that currently, but if and when someone decides that we should do it, intel_ddi_set_vc_payload_alloc() would appear to be be the right place for it. So having the function call in haswell_crtc_disable() seems like the right thing for the future even if it does nothing currently. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-26drm/i915: fix plane/cursor handling when runtime suspendedPaulo Zanoni
If we're runtime suspended and try to use the plane interfaces, we will get a lot of WARNs saying we did the wrong thing. We need to get runtime PM references to pin the objects, and to change the fences. The pin functions are the ideal places for this, but intel_crtc_cursor_set_obj() doesn't call them, so we also have to add get/put calls inside it. There is no problem if we runtime suspend right after these functions are finished, because the registers written are forwarded to system memory. Note: for a complete fix of the cursor-dpms test case, we also need the patch named "drm/i915: Don't try to enable cursor from setplane when crtc is disabled". v2: - Narrow the put/get calls on intel_crtc_cursor_set_obj() (Daniel) v3: - Make get/put also surround the fence and unpin calls (Daniel and Ville). - Merge all the plane changes into a single patch since they're the same fix. - Add the comment requested by Daniel. v4: - Remove spurious whitespace (Ville). v5: - Remove intel_crtc_update_cursor() chunk since Ville did an equivalent fix in another patch (Ville). v6: - Remove unpin chunk: it will be on a separate patch (Ville, Chris, Daniel). v7: - Same thing, new color. Testcase: igt/pm_rpm/cursor Testcase: igt/pm_rpm/cursor-dpms Testcase: igt/pm_rpm/legacy-planes Testcase: igt/pm_rpm/legacy-planes-dpms Testcase: igt/pm_rpm/universal-planes Testcase: igt/pm_rpm/universal-planes-dpms Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81645 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82603 Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-26drm/i915: Ignore VBT backlight presence check on Acer C720 (4005U)Scot Doyle
commit c675949ec58ca50d5a3ae3c757892f1560f6e896 Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT prevents backlight setup on the Acer C720 (Core i3 4005U CPU), which has a misconfigured VBT. Apply quirk to ignore the VBT backlight presence check during backlight setup. Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Tyler Cleveland <siralucardt@openmailbox.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org (3.15+) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-08-26video: of: display_timing: double free on errorDan Carpenter
The display_timings_release() function frees "disp" and we free it again on the next line. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26drivers: video: fbdev: atmel_lcdfb.c: fix error return codeJulia Lawall
Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26video: ARM CLCD: Fix calculation of bits-per-pixelJon Medhurst (Tixy)
If the device-tree specifies a max-memory-bandwidth property then the CLCD driver uses that to calculate the bits-per-pixel supported, however, this calculation is faulty for two reasons. 1. It doesn't ensure that the result is a sane value, i.e. a power of 2 and <= 32 as the rest of the code assumes. 2. It uses the displayed resolution and calculates the average bandwidth across the whole frame. It should instead calculate the peak bandwidth based on the pixel clock. This patch fixes both the above. Signed-off-by: Jon Medhurst <tixy@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26fbdev: Remove __init from chips_hw_init() to fix build failurePranith Kumar
Fix build failure caused as follows: The function chipsfb_pci_init() references the function __init chips_hw_init(). This is often because chipsfb_pci_init lacks a __init annotation or the annotation of chips_hw_init is wrong. make: *** [drivers] Error 2 by removing the __init annotation from chips_hw_init(). The other thing that could have been done was annotating chipsfb_pci_init(). But that cannot be done since chipsfb_pci_init() is called from non __init functions. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26iommu/vt-d: Check return value of acpi_bus_get_device()Joerg Roedel
Checking adev == NULL is not sufficient as acpi_bus_get_device() might not touch the value of this parameter in an error case, so check the return value directly. Fixes: ed40356b5fcf1ce28e026ab39c5b2b6939068b50 Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-24 07:22:09 +0000