summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-07r8169: add missing RX enabling for WoL on RTL8125Heiner Kallweit
RTL8125 also requires to enable RX for WoL. v2: add missing Fixes tag Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07vhost/vsock: accept only packets with the right dst_cidStefano Garzarella
When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07net: phy: dp83867: fix hfs boot in rgmii modeGrygorii Strashko
The commit ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") causes regression on TI dra71x-evm and dra72x-evm, where DP83867 PHY is used in "rgmii-id" mode - the networking stops working. Unfortunately, it's not enough to just move DT parsing code to .probe() as it depends on phydev->interface value, which is set to correct value abter the .probe() is completed and before calling .config_init(). So, RGMII configuration can't be loaded from DT. To fix and issue - move RGMII validation code to .config_init() - parse RGMII parameters in dp83867_of_init(), but consider them as optional. Fixes: ef87f7da6b28 ("net: phy: dp83867: move dt parsing to probe") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07net: ethernet: ti: cpsw: fix extra rx interruptGrygorii Strashko
Now RX interrupt is triggered twice every time, because in cpsw_rx_interrupt() it is asked first and then disabled. So there will be pending interrupt always, when RX interrupt is enabled again in NAPI handler. Fix it by first disabling IRQ and then do ask. Fixes: 870915feabdc ("drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itself") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-07pppoe: remove redundant BUG_ON() check in pppoe_pernetAditya Pakki
Passing NULL to pppoe_pernet causes a crash via BUG_ON. Dereferencing net in net_generici() also has the same effect. This patch removes the redundant BUG_ON check on the same parameter. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge tag 'mlx5-fixes-2019-12-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-12-05 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.19: ('net/mlx5e: Query global pause state before setting prio2buffer') For -stable v5.3 ('net/mlx5e: Fix SFF 8472 eeprom length') ('net/mlx5e: Fix translation of link mode into speed') ('net/mlx5e: Fix freeing flow with kfree() and not kvfree()') ('net/mlx5e: ethtool, Fix analysis of speed setting') ('net/mlx5e: Fix TXQ indices to be sequential') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06lpc_eth: kernel BUG on removeBruno Carneiro da Cunha
We may have found a bug in the nxp/lpc_eth.c driver. The function platform_set_drvdata() is called twice, the second time it is called, in lpc_mii_init(), it overwrites the struct net_device which should be at pdev->dev->driver_data with pldat->mii_bus. When trying to remove the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will return the pldat->mii_bus pointer and try to use it as a struct net_device pointer. This causes unregister_netdev to segfault and generate a kernel BUG. Is this reproducible? Signed-off-by: Daniel Martinez <linux@danielsmartinez.com> Signed-off-by: Bruno Carneiro da Cunha <brunocarneirodacunha@usp.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06phy: mdio-thunder: add missed pci_release_regions in removeChuhong Yuan
The driver forgets to call pci_release_regions() in remove like that in probe failure. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: stmmac: reset Tx desc base address before restarting TxJongsung Kim
Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06enetc: disable EEE autoneg by defaultYangbo Lu
The EEE support has not been enabled on ENETC, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that ENETC connects to, to prevent the above unwanted outcome. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05ppp: fix out-of-bounds access in bpf_prog_create()Eric Biggers
sock_fprog_kern::len is in units of struct sock_filter, not bytes. Fixes: 3e859adf3643 ("compat_ioctl: unify copy-in of ppp filters") Reported-by: syzbot+eb853b51b10f1befa0b7@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: hns3: fix VF ID issue for setting VF VLANJian Shen
Previously, when set VF VLAN with command "ip link set <pf name> vf <vf id> vlan <vlan id>", the VF ID 0 is handled as PF incorrectly, which should be the first VF. This patch fixes it. Fixes: 21e043cd8124 ("net: hns3: fix set port based VLAN for PF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: hns3: fix a use after free problem in hns3_nic_maybe_stop_tx()Yunsheng Lin
Currently, hns3_nic_maybe_stop_tx() uses skb_copy() to linearize a SKB if the BD num required by the SKB does not meet the hardware limitation, and it linearizes the SKB by allocating a new linearized SKB and freeing the old SKB, if hns3_nic_maybe_stop_tx() returns -EBUSY because there are no enough space in the ring to send the linearized skb to hardware, the sch_direct_xmit() still hold reference to old SKB and try to retransmit the old SKB when dev_hard_start_xmit() return TX_BUSY, which may cause use after freed problem. This patch fixes it by using __skb_linearize() to linearize the SKB in hns3_nic_maybe_stop_tx(). Fixes: 51e8439f3496 ("net: hns3: add 8 BD limit for tx flow") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: hns3: fix for TX queue not restarted problemYunsheng Lin
There is timing window between ring_space checking and netif_stop_subqueue when transmiting a SKB, and the TX BD cleaning may be executed during the time window, which may caused TX queue not restarted problem. This patch fixes it by rechecking the ring_space after netif_stop_subqueue to make sure TX queue is restarted. Also, the ring->next_to_clean is updated even when pkts is zero, because all the TX BD cleaned may be non-SKB, so it needs to check if TX queue need to be restarted. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: ethernet: ti: cpsw_switchdev: fix unmet direct dependencies detected ↵Grygorii Strashko
for NET_SWITCHDEV Replace "select NET_SWITCHDEV" vs "depends on NET_SWITCHDEV" to fix Kconfig warning with CONFIG_COMPILE_TEST=y WARNING: unmet direct dependencies detected for NET_SWITCHDEV Depends on [n]: NET [=y] && INET [=n] Selected by [y]: - TI_CPSW_SWITCHDEV [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && (ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST [=y]) because TI_CPSW_SWITCHDEV blindly selects NET_SWITCHDEV even though INET is not set/enabled, while NET_SWITCHDEV depends on INET. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net/mlx5e: E-switch, Fix Ingress ACL groups in switchdev mode for prio tagParav Pandit
In cited commit, when prio tag mode is enabled, FTE creation fails due to missing group with valid match criteria. Hence, (a) create prio tag group metadata_prio_tag_grp when prio tag is enabled with match criteria for vlan push FTE. (b) Rename metadata_grp to metadata_allmatch_grp to reflect its purpose. Also when priority tag is enabled, delete metadata settings after deleting ingress rules, which are using it. Tide up rest of the ingress config code for unnecessary labels. Fixes: 10652f39943e ("net/mlx5: Refactor ingress acl configuration") Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05net/mlx5e: ethtool, Fix analysis of speed settingAya Levin
When setting speed to 100G via ethtool (AN is set to off), only 25G*4 is configured while the user, who has an advanced HW which supports extended PTYS, expects also 50G*2 to be configured. With this patch, when extended PTYS mode is available, configure PTYS via extended fields. Fixes: 4b95840a6ced ("net/mlx5e: Fix matching of speed to PRM link modes") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05net/mlx5e: Fix translation of link mode into speedAya Levin
Add a missing value in translation of PTYS ext_eth_proto_oper to its corresponding speed. When ext_eth_proto_oper bit 10 is set, ethtool shows unknown speed. With this fix, ethtool shows speed is 100G as expected. Fixes: a08b4ed1373d ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05net/mlx5e: Fix free peer_flow when refcount is 0Roi Dayan
It could be neigh update flow took a refcount on peer flow so sometimes we cannot release peer flow even if parent flow is being freed now. Fixes: 5a7e5bcb663d ("net/mlx5e: Extend tc flow struct with reference counter") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05net/mlx5e: Fix freeing flow with kfree() and not kvfree()Roi Dayan
Flows are allocated with kzalloc() so free with kfree(). Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05net/mlx5e: Fix SFF 8472 eeprom lengthEran Ben Elisha
SFF 8472 eeprom length is 512 bytes. Fix module info return value to support 512 bytes read. Fixes: ace329f4ab3b ("net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05net/mlx5e: Query global pause state before setting prio2bufferHuy Nguyen
When the user changes prio2buffer mapping while global pause is enabled, mlx5 driver incorrectly sets all active buffers (buffer that has at least one priority mapped) to lossy. Solution: If global pause is enabled, set all the active buffers to lossless in prio2buffer command. Also, add error message when buffer size is not enough to meet xoff threshold. Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05net/mlx5e: Fix TXQ indices to be sequentialEran Ben Elisha
Cited patch changed (channel index, tc) => (TXQ index) mapping to be a static one, in order to keep indices consistent when changing number of channels or TCs. For 32 channels (OOB) and 8 TCs, real num of TXQs is 256. When reducing the amount of channels to 8, the real num of TXQs will be changed to 64. This indices method is buggy: - Channel #0, TC 3, the TXQ index is 96. - Index 8 is not valid, as there is no such TXQ from driver perspective (As it represents channel #8, TC 0, which is not valid with the above configuration). As part of driver's select queue, it calls netdev_pick_tx which returns an index in the range of real number of TXQs. Depends on the return value, with the examples above, driver could have returned index larger than the real number of tx queues, or crash the kernel as it tries to read invalid address of SQ which was not allocated. Fix that by allocating sequential TXQ indices, and hold a new mapping between (channel index, tc) => (real TXQ index). This mapping will be updated as part of priv channels activation, and is used in mlx5e_select_queue to find the selected queue index. The existing indices mapping (channel_tc2txq) is no longer needed, as it is used only for statistics structures and can be calculated on run time. Delete its definintion and updates. Fixes: 8bfaf07f7806 ("net/mlx5e: Present SW stats when state is not opened") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-12-05s390/qeth: fix dangling IO buffers after halt/clearJulian Wiedmann
The cio layer's intparm logic does not align itself well with how qeth manages cmd IOs. When an active IO gets terminated via halt/clear, the corresponding IRQ's intparm does not reflect the cmd buffer but rather the intparm that was passed to ccw_device_halt() / ccw_device_clear(). This behaviour was recently clarified in commit b91d9e67e50b ("s390/cio: fix intparm documentation"). As a result, qeth_irq() currently doesn't cancel a cmd that was terminated via halt/clear. This primarily causes us to leak card->read_cmd after the qeth device is removed, since our IO path still holds a refcount for this cmd. For qeth this means that we need to keep track of which IO is pending on a device ('active_cmd'), and use this as the intparm when calling halt/clear. Otherwise qeth_irq() can't match the subsequent IRQ to its cmd buffer. Since we now keep track of the _expected_ intparm, we can also detect any mismatch; this would constitute a bug somewhere in the lower layers. In this case cancel the active cmd - we effectively "lost" the IRQ and should not expect any further notification for this IO. Fixes: 405548959cc7 ("s390/qeth: add support for dynamically allocated cmds") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05s390/qeth: ensure linear access to packet headersJulian Wiedmann
When the RX path builds non-linear skbs, the packet headers can currently spill over into page fragments. Depending on the packet type and what fields we need to access in the headers, this could cause us to go past the end of skb->data. So for non-linear packets, copy precisely the length of the necessary headers ('linear_len') into skb->data. And don't copy more, upper-level protocols will peel whatever additional packet headers they need. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05s390/qeth: guard against runt packetsJulian Wiedmann
Depending on a packet's type, the RX path needs to access fields in the packet headers and thus requires a minimum packet length. Enforce this length when building the skb. On the other hand a single runt packet is no reason to drop the whole RX buffer. So just skip it, and continue processing on the next packet. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: thunderx: start phy before starting autonegotiationMian Yousaf Kaukab
Since commit 2b3e88ea6528 ("net: phy: improve phy state checking") phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start() before calling phy_start_aneg() during probe so that autonegotiation is initiated. As phy_start() takes care of calling phy_start_aneg(), drop the explicit call to phy_start_aneg(). Network fails without this patch on Octeon TX. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: sfp: fix hwmonRussell King
The referenced commit below allowed more than one hwmon device to be created per SFP, which is definitely not what we want. Avoid this by only creating the hwmon device just as we transition to WAITDEV state. Fixes: 139d3a212a1f ("net: sfp: allow modules with slow diagnostics to probe") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: sfp: fix unbindRussell King
When unbinding, we don't correctly tear down the module state, leaving (for example) the hwmon registration behind. Ensure everything is properly removed by sending a remove event at unbind. Fixes: 6b0da5c9c1a3 ("net: sfp: track upstream's attachment state in state machine") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04ionic: keep users rss hash across lif resetShannon Nelson
If the user has specified their own RSS hash key, don't lose it across queue resets such as DOWN/UP, MTU change, and number of channels change. This is fixed by moving the key initialization to a little earlier in the lif creation. Also, let's clean up the RSS config a little better on the way down by setting it all to 0. Fixes: aa3198819bea ("ionic: Add RSS support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookupSabrina Dubroca
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: mscc: ocelot: unregister the PTP clock on deinitVladimir Oltean
Currently a switch driver deinit frees the regmaps, but the PTP clock is still out there, available to user space via /dev/ptpN. Any PTP operation is a ticking time bomb, since it will attempt to use the freed regmaps and thus trigger kernel panics: [ 4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy [ 4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22 [ 4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22 [ 6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 [ 6.367090] Mem abort info: [ 6.369888] ESR = 0x96000046 [ 6.369891] EC = 0x25: DABT (current EL), IL = 32 bits [ 6.369892] SET = 0, FnV = 0 [ 6.369894] EA = 0, S1PTW = 0 [ 6.369895] Data abort info: [ 6.369897] ISV = 0, ISS = 0x00000046 [ 6.369899] CM = 0, WnR = 1 [ 6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000 [ 6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000 [ 6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 6.420443] Modules linked in: [ 6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204 [ 6.431273] Hardware name: LS1028A RDB Board (DT) [ 6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 6.440802] pc : css_release+0x24/0x58 [ 6.444561] lr : regmap_read+0x40/0x78 [ 6.448316] sp : ffff800010513cc0 [ 6.451636] x29: ffff800010513cc0 x28: ffff002055873040 [ 6.456963] x27: 0000000000000000 x26: 0000000000000000 [ 6.462289] x25: 0000000000000000 x24: 0000000000000000 [ 6.467617] x23: 0000000000000000 x22: 0000000000000080 [ 6.472944] x21: ffff800010513d44 x20: 0000000000000080 [ 6.478270] x19: 0000000000000000 x18: 0000000000000000 [ 6.483596] x17: 0000000000000000 x16: 0000000000000000 [ 6.488921] x15: 0000000000000000 x14: 0000000000000000 [ 6.494247] x13: 0000000000000000 x12: 0000000000000000 [ 6.499573] x11: 0000000000000000 x10: 0000000000000000 [ 6.504899] x9 : 0000000000000000 x8 : 0000000000000000 [ 6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0 [ 6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0 [ 6.520876] x3 : 0000000000000088 x2 : ffff800010513d44 [ 6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0 [ 6.531528] Call trace: [ 6.533977] css_release+0x24/0x58 [ 6.537385] regmap_read+0x40/0x78 [ 6.540795] __ocelot_read_ix+0x6c/0xa0 [ 6.544641] ocelot_ptp_gettime64+0x4c/0x110 [ 6.548921] ptp_clock_gettime+0x4c/0x58 [ 6.552853] pc_clock_gettime+0x5c/0xa8 [ 6.556699] __arm64_sys_clock_gettime+0x68/0xc8 [ 6.561331] el0_svc_common.constprop.2+0x7c/0x178 [ 6.566133] el0_svc_handler+0x34/0xa0 [ 6.569891] el0_sync_handler+0x114/0x1d0 [ 6.573908] el0_sync+0x140/0x180 [ 6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663) [ 6.583349] ---[ end trace d196b9b14cdae2da ]--- [ 6.587977] Kernel panic - not syncing: Fatal exception [ 6.593216] SMP: stopping secondary CPUs [ 6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000 [ 6.603261] PHYS_OFFSET: 0xffffd0a7c0000000 [ 6.607454] CPU features: 0x10002,21806008 [ 6.611558] Memory Limit: none And now that ocelot->ptp_clock is checked at exit, prevent a potential error where ptp_clock_register returned a pointer-encoded error, which we are keeping in the ocelot private data structure. So now, ocelot->ptp_clock is now either NULL or a valid pointer. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03can: xilinx_can: Fix usage of skb memorySrinivas Neeli
As per linux can framework, driver not allowed to touch the skb memory after can_put_echo_skb() call. This patch fixes the same. https://www.spinics.net/lists/linux-can/msg02199.html Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-03can: xilinx_can: skip error message on deferred probeVenkatesh Yadav Abbarapu
When the CAN bus clock is provided from the clock wizard, clock wizard driver may not be available when can driver probes resulting to the error message "bus clock not found error". As this error message is not very useful to the end user, skip printing in the case of deferred probe. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-03can: ucan: fix non-atomic allocation in completion handlerJohan Hovold
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: Martin Elshuber <martin.elshuber@theobroma-systems.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-03can: slcan: Fix use-after-free Read in slcan_openJouni Hogander
Slcan_open doesn't clean-up device which registration failed from the slcan_devs device list. On next open this list is iterated and freed device is accessed. Fix this by calling slc_free_netdev in error path. Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was identified in slip_open by syzboz. Same bug is in slcan.c. Here is the trace from the Syzbot slip report: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path") Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: "Incoming: - a small number of updates to scripts/, ocfs2 and fs/buffer.c - most of MM I still have quite a lot of material (mostly not MM) staged after linux-next due to -next dependencies. I'll send those across next week as the preprequisites get merged up" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm/page_io.c: annotate refault stalls from swap_readpage mm/Kconfig: fix trivial help text punctuation mm/Kconfig: fix indentation mm/memory_hotplug.c: remove __online_page_set_limits() mm: fix typos in comments when calling __SetPageUptodate() mm: fix struct member name in function comments mm/shmem.c: cast the type of unmap_start to u64 mm: shmem: use proper gfp flags for shmem_writepage() mm/shmem.c: make array 'values' static const, makes object smaller userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register() userfaultfd: wrap the common dst_vma check into an inlined function userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb() userfaultfd: use vma_pagesize for all huge page size calculation mm/madvise.c: use PAGE_ALIGN[ED] for range checking mm/madvise.c: replace with page_size() in madvise_inject_error() mm/mmap.c: make vma_merge() comment more easy to understand mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops autonuma: reduce cache footprint when scanning page tables autonuma: fix watermark checking in migrate_balanced_pgdat() ...
2019-12-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix several scatter gather list issues in kTLS code, from Jakub Kicinski. 2) macb driver device remove has to kill the hresp_err_tasklet. From Chuhong Yuan. 3) Several memory leak and reference count bug fixes in tipc, from Tung Nguyen. 4) Fix mlx5 build error w/o ipv6, from Yue Haibing. 5) Fix jumbo frame and other regressions in r8169, from Heiner Kallweit. 6) Undo some BUG_ON()'s and replace them with WARN_ON_ONCE and proper error propagation/handling. From Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (24 commits) openvswitch: remove another BUG_ON() openvswitch: drop unneeded BUG_ON() in ovs_flow_cmd_build_info() net: phy: realtek: fix using paged operations with RTL8105e / RTL8208 r8169: fix resume on cable plug-in r8169: fix jumbo configuration for RTL8168evl net: emulex: benet: indent a Kconfig depends continuation line selftests: forwarding: fix race between packet receive and tc check net: sched: fix `tc -s class show` no bstats on class with nolock subqueues net: ethernet: ti: ale: ensure vlan/mdb deleted when no members net/mlx5e: Fix build error without IPV6 selftests: pmtu: use -oneline for ip route list cache tipc: fix duplicate SYN messages under link congestion tipc: fix wrong timeout input for tipc_wait_for_cond() tipc: fix wrong socket reference counter after tipc_sk_timeout() returns tipc: fix potential memory leak in __tipc_sendmsg() net: macb: add missed tasklet_kill selftests: bpf: correct perror strings selftests: bpf: test_sockmap: handle file creation failures gracefully net/tls: use sg_next() to walk sg entries net/tls: remove the dead inplace_crypto code ...
2019-12-01Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various fixes: - Fix the PAT performance regression that downgraded write-combining device memory regions to uncached. - There's been a number of bugs in 32-bit double fault handling - hopefully all fixed now. - Fix an LDT crash - Fix an FPU over-optimization that broke with GCC9 code optimizations. - Misc cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/pat: Fix off-by-one bugs in interval tree search x86/ioperm: Save an indentation level in tss_update_io_bitmap() x86/fpu: Don't cache access to fpu_fpregs_owner_ctx x86/entry/32: Remove unused 'restore_all_notrace' local label x86/ptrace: Document FSBASE and GSBASE ABI oddities x86/ptrace: Remove set_segment_reg() implementations for current x86/traps: die() instead of panicking on a double fault x86/doublefault/32: Rewrite the x86_32 #DF handler and unify with 64-bit x86/doublefault/32: Move #DF stack and TSS to cpu_entry_area x86/doublefault/32: Rename doublefault.c to doublefault_32.c x86/traps: Disentangle the 32-bit and 64-bit doublefault code lkdtm: Add a DOUBLE_FAULT crash type on x86 selftests/x86/single_step_syscall: Check SYSENTER directly x86/mm/32: Sync only to VMALLOC_END in vmalloc_sync_all()
2019-12-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - updates to Ilitech driver to support ILI2117 - face lift of st1232 driver to support MT-B protocol - a new driver for i.MX system controller keys - mpr121 driver now supports polling mode - various input drivers have been switched away from input_polled_dev to use polled mode of regular input devices - other assorted cleanups and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits) Input: synaptics-rmi4 - fix various V4L2 compliance problems in F54 Input: synaptics - switch another X1 Carbon 6 to RMI/SMbus Input: fix Kconfig indentation Input: imx_sc_key - correct SCU message structure to avoid stack corruption Input: ili210x - optionally show calibrate sysfs attribute Input: ili210x - add resolution to chip operations structure Input: ili210x - do not retrieve/print chip firmware version Input: mms114 - use device_get_match_data Input: ili210x - remove unneeded suspend and resume handlers Input: ili210x - do not unconditionally mark touchscreen as wakeup source Input: ili210x - define and use chip operations structure Input: ili210x - do not set parent device explicitly Input: ili210x - handle errors from input_mt_init_slots() Input: ili210x - switch to using threaded IRQ Input: ili210x - add ILI2117 support dt-bindings: input: touchscreen: ad7879: generic node names in example Input: ar1021 - fix typo in preprocessor macro name Input: synaptics-rmi4 - simplify data read in rmi_f54_work Input: kxtj9 - switch to using polled mode of input devices Input: kxtj9 - switch to using managed resources ...
2019-12-01Merge tag 'libnvdimm-for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The highlight this cycle is continuing integration fixes for PowerPC and some resulting optimizations. Summary: - Updates to better support vmalloc space restrictions on PowerPC platforms. - Cleanups to move common sysfs attributes to core 'struct device_type' objects. - Export the 'target_node' attribute (the effective numa node if pmem is marked online) for regions and namespaces. - Miscellaneous fixups and optimizations" * tag 'libnvdimm-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits) MAINTAINERS: Remove Keith from NVDIMM maintainers libnvdimm: Export the target_node attribute for regions and namespaces dax: Add numa_node to the default device-dax attributes libnvdimm: Simplify root read-only definition for the 'resource' attribute dax: Simplify root read-only definition for the 'resource' attribute dax: Create a dax device_type libnvdimm: Move nvdimm_bus_attribute_group to device_type libnvdimm: Move nvdimm_attribute_group to device_type libnvdimm: Move nd_mapping_attribute_group to device_type libnvdimm: Move nd_region_attribute_group to device_type libnvdimm: Move nd_numa_attribute_group to device_type libnvdimm: Move nd_device_attribute_group to device_type libnvdimm: Move region attribute group definition libnvdimm: Move attribute groups to device type libnvdimm: Remove prototypes for nonexistent functions libnvdimm/btt: fix variable 'rc' set but not used libnvdimm/pmem: Delete include of nd-core.h libnvdimm/namespace: Differentiate between probe mapping and runtime mapping libnvdimm/pfn_dev: Don't clear device memmap area during generic namespace probe libnvdimm: Trivial comment fix ...
2019-12-01Merge tag 'mailbox-v5.5' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - omap : misc - catch error returned from pm_runtime_put_sync - hisi : misc - drop .owner from platform_driver - stm : change how wakeup is handled - imx : fix - bailout on error and nuke correct irq - imx : add support for imx7ulp platform * tag 'mailbox-v5.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: imx: add support for imx v1 mu dt-bindings: mailbox: imx-mu: add imx7ulp MU support mailbox: imx: Clear the right interrupts at shutdown mailbox: imx: Fix Tx doorbell shutdown path mailbox: stm32-ipcc: Update wakeup management mailbox: no need to set .owner platform_driver_register mailbox/omap: Handle if CONFIG_PM is disabled
2019-12-01Merge tag 'hwlock-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull hwspinlock updates from Bjorn Andersson: "This contains a number of cleanups to the core and several drivers, in particular removing the requirement for drivers to implement pm_runtime. It also udpates the location of the git tree in MAINTAINERS" * tag 'hwlock-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: hwspinlock: u8500_hsem: Remove redundant PM runtime implementation hwspinlock: sprd: Remove redundant PM runtime implementation hwspinlock: Let the PM runtime can be optional hwspinlock: Remove BUG_ON() from the hwspinlock core hwspinlock: sprd: Use devm_hwspin_lock_register() to register hwlock controller hwspinlock: sprd: Use devm_add_action_or_reset() for calls to clk_disable_unprepare() hwspinlock: sprd: Check the return value of clk_prepare_enable() hwspinlock: sprd: Change to use devm_platform_ioremap_resource() hwspinlock: u8500_hsem: Use devm_hwspin_lock_register() to register hwlock controller hwspinlock: u8500_hsem: Use devm_kzalloc() to allocate memory hwspinlock: u8500_hsem: Change to use devm_platform_ioremap_resource() MAINTAINERS: hwspinlock: update git tree location
2019-12-01Merge tag 'rpmsg-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This contains a number of bug fixes to the GLINK transport driver, an off-by-one in the GLINK smem driver and a memory leak fix in the rpmsg char driver" * tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: Fix Kconfig indentation rpmsg: char: Simplify 'rpmsg_eptdev_release()' rpmsg: glink: Free pending deferred work on remove rpmsg: glink: Don't send pending rx_done during remove rpmsg: glink: Fix rpmsg_register_device err handling rpmsg: glink: Put an extra reference during cleanup rpmsg: glink: Fix use after free in open_ack TIMEOUT case rpmsg: glink: Fix reuse intents memory leak issue rpmsg: glink: Set tail pointer to 0 at end of FIFO rpmsg: char: release allocated memory
2019-12-01Merge tag 'rproc-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull remoteproc updates from Bjorn Andersson: "This adds support for booting the modem processor on Qualcomm MSM8998 and carries some cleanup up and bug fixes to the framework and the stm32 driver" * tag 'rproc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: Revert "dt-bindings: remoteproc: stm32: add wakeup-source" remoteproc: stm32: fix probe error case remoteproc: stm32: wakeup the system by wdg irq dt-bindings: remoteproc: stm32: add wakeup-source remoteproc: Fix wrong rvring index computation remoteproc: stm32: use workqueue to treat mailbox callback remoteproc: fix argument 2 of rproc_mem_entry_init remoteproc: qcom_q6v5_mss: Add support for MSM8998 dt-bindings: remoteproc: qcom: Add Q6v5 Modem PIL binding for MSM8998 remoteproc: debug: Remove unneeded NULL check remoteproc: remove useless typedef
2019-12-01Merge branch 'i2c/for-5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has mostly driver updates this time. The few noteworthy changes are: the core has now support for analog and digital filters with at91 being the first user, a core addition to replace the NULL returning i2c_new_probed_device() with an ERR_PTR variant, and the pxa driver has finally being moved to use the generic I2C slave interface. We have quite a significant number of reviews per patch this time, so thank you to all involved!" * 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) video: fbdev: matrox: convert to i2c_new_scanned_device i2c: icy: convert to i2c_new_scanned_device i2c: replace i2c_new_probed_device with an ERR_PTR variant i2c: Fix Kconfig indentation i2c: smbus: Don't filter out duplicate alerts i2c: i801: Correct Intel Jasper Lake SOC naming i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop i2c: iproc: Add i2c repeated start capability i2c: remove helpers for ref-counting clients i2c: tegra: Use dma_request_chan() directly for channel request i2c: sh_mobile: Use dma_request_chan() directly for channel request i2c: qup: Use dma_request_chan() directly for channel request i2c: at91: Use dma_request_chan() directly for channel request i2c: rcar: Remove superfluous call to clk_get_rate() i2c: pxa: remove unused i2c-slave APIs i2c: pxa: migrate to new i2c_slave APIs i2c: cros-ec-tunnel: Make the device acpi compatible i2c: stm32f7: report dma error during probe i2c: icy: no need to populate address for scanned device i2c: xiic: Fix kerneldoc warnings ...
2019-12-01Merge tag 'for-linus-20191129' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "I wasn't going to send this one off so soon, but unfortunately one of the fixes from the previous pull broke the build on some archs. So I'm sending this sooner rather than later. This contains: - Add highmem.h include for io_uring, because of the kmap() additions from last round. For some reason the build bot didn't spot this even though it sat for days. - Three minor ';' removals - Add support for the Beurer CD-on-a-chip device - Make io_uring work on MMU-less archs" * tag 'for-linus-20191129' of git://git.kernel.dk/linux-block: io_uring: fix missing kmap() declaration on powerpc ataflop: Remove unneeded semicolon block: sunvdc: Remove unneeded semicolon drbd: Remove unneeded semicolon io_uring: add mapping support for NOMMU archs sr_vendor: support Beurer GL50 evo CD-on-a-chip devices. cdrom: respect device capabilities during opening action
2019-12-01Merge tag 'platform-drivers-x86-v5.5-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - New bootctl driver for Mellanox BlueField SoC. - New driver to support System76 laptops. - Temperature monitoring and fan control on Acer Aspire 7551 is now supported. - Previously the Huawei driver handled only hotkeys. After the conversion to WMI it has been expanded to support newer laptop models. - Big refactoring of intel-speed-select tools allows to use it on Intel CascadeLake-N systems. - Touchscreen support for ezpad 6 m4 and Schneider SCT101CTM tablets - Miscellaneous clean ups and fixes here and there. * tag 'platform-drivers-x86-v5.5-1' of git://git.infradead.org/linux-platform-drivers-x86: (59 commits) platform/x86: hp-wmi: Fix ACPI errors caused by passing 0 as input size platform/x86: hp-wmi: Fix ACPI errors caused by too small buffer platform/x86: intel_pmc_core: Add Comet Lake (CML) platform support to intel_pmc_core driver platform/x86: intel_pmc_core: Fix the SoC naming inconsistency platform/mellanox: Fix Kconfig indentation tools/power/x86/intel-speed-select: Display TRL buckets for just base config level tools/power/x86/intel-speed-select: Ignore missing config level platform/x86: touchscreen_dmi: Add info for the ezpad 6 m4 tablet tools/power/x86/intel-speed-select: Increment version tools/power/x86/intel-speed-select: Use core count for base-freq mask tools/power/x86/intel-speed-select: Support platform with limited Intel(R) Speed Select tools/power/x86/intel-speed-select: Use Frequency weight for CLOS tools/power/x86/intel-speed-select: Make CLOS frequency in MHz tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG tools/power/x86/intel-speed-select: Auto mode for CLX tools/power/x86/intel-speed-select: Correct CLX-N frequency units tools/power/x86/intel-speed-select: Change display of "avx" to "avx2" tools/power/x86/intel-speed-select: Extend command set for perf-profile Add touchscreen platform data for the Schneider SCT101CTM tablet platform/x86: intel_int0002_vgpio: Pass irqchip when adding gpiochip ...
2019-12-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - Support for Logitech G15 (Hans de Goede) - HID parser improvements, improving support for some devices; e.g. Windows Precision Touchpad, products from Primax, etc. (Blaž Hrastnik, Candle Sun) - robustification of tablet mode support in google-whiskers driver (Dmitry Torokhov) - assorted small fixes, device-specific quirks and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (23 commits) HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device HID: quirks: remove hid-led devices from hid_have_special_driver HID: Improve Windows Precision Touchpad detection. HID: i2c-hid: Reset ALPS touchpads on resume HID: i2c-hid: fix no irq after reset on raydium 3118 HID: logitech-hidpp: Silence intermittent get_battery_capacity errors HID: i2c-hid: remove orphaned member sleep_delay HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse HID: core: check whether Usage Page item is after Usage ID items HID: intel-ish-hid: Spelling s/diconnect/disconnect/ HID: google: Detect base folded usage instead of hard-coding whiskers HID: logitech: Add depends on LEDS_CLASS to Logitech Kconfig entry HID: lg-g15: Add support for the G510's M1-M3 and MR LEDs HID: lg-g15: Add support for controlling the G510's RGB backlight HID: lg-g15: Add support for the G510 keyboards' gaming keys HID: lg-g15: Add support for the M1-M3 and MR LEDs HID: lg-g15: Add keyboard and LCD backlight control HID: Add driver for Logitech gaming keyboards (G15, G15 v2) Input: Add event-codes for macro keys found on various keyboards HID: hidraw: replace printk() with corresponding pr_xx() variant ...
2019-12-01Merge tag 'linux-watchdog-5.5-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - support for NCT6116D - several small fixes and improvements * tag 'linux-watchdog-5.5-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: jz4740: Drop dependency on MACH_JZ47xx watchdog: jz4740: Use regmap provided by TCU driver watchdog: jz4740: Use WDT clock provided by TCU driver dt-bindings: watchdog: sama5d4_wdt: add microchip,sam9x60-wdt compatible watchdog: sama5d4_wdt: cleanup the bit definitions watchdog: sprd: Fix the incorrect pointer getting from driver data watchdog: aspeed: Fix clock behaviour for ast2600 watchdog: imx7ulp: Fix reboot hang watchdog: make nowayout sysfs file writable watchdog: prevent deferral of watchdogd wakeup on RT watchdog: imx7ulp: Use definitions instead of magic values watchdog: imx7ulp: Remove inline annotations watchdog: imx7ulp: Remove unused structure member watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable() watchdog: wdat_wdt: Spelling s/configrable/configurable/ watchdog: bd70528: Trivial function documentation fix watchdog: cadence: Do not show error in case of deferred probe watchdog: Fix the race between the release of watchdog_core_data and cdev watchdog: sbc7240_wdt: Fix yet another -Wimplicit-fallthrough warning watchdog: intel-mid_wdt: Add WATCHDOG_NOWAYOUT support ...
generated by cgit (git 2.34.1) at 2024-05-19 09:29:42 +0000