summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-25mlxsw: spectrum_qdisc: Support offloading of TBF QdiscPetr Machata
React to the TC messages that were introduced in a preceding patch and configure egress maximum shaper as appropriate. TBF can be used as a root qdisc or under one of PRIO or strict ETS bands. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Configure shaper rate and burst size togetherPetr Machata
In order to allow configuration of burst size together with shaper rate, extend mlxsw_sp_port_ets_maxrate_set() with a burst_size argument. Convert call sites to pass 0 (for default). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Add lowest_shaper_bs to struct mlxsw_spPetr Machata
Lower limit of burst size configuration is dependent on system type. Add a datum to track the value. Initialize as appropriate in mlxsw_spX_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: reg: Increase MLXSW_REG_QEEC_MAS_DISPetr Machata
As the port speeds grow, the current value of "unlimited shaper", 200000000Kbps, might become lower than the actually supported speeds. Bump it to the maximum value that fits in the corresponding QEEC field, which is about 2.1Tbps. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: reg: Add max_shaper_bs to QoS ETS Element ConfigurationPetr Machata
The QEEC register configures scheduling elements. One of the bits of configuration is the burst size to use for the shaper installed on the element. Add the necessary fields to support this configuration. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Extract a common leaf unoffload functionPetr Machata
When the RED Qdisc is unoffloaded, it needs to reduce the reported backlog by the amount that is in the HW, so that only the SW backlog is contained in the counter. The same thing will need to be done by TBF, and likely any other leaf Qdisc as well. Extract a helper mlxsw_sp_qdisc_leaf_unoffload() and call it from mlxsw_sp_qdisc_red_unoffload(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Add mlxsw_sp_qdisc_get_class_stats()Petr Machata
Add a wrapper around mlxsw_sp_qdisc_collect_tc_stats() and mlxsw_sp_qdisc_update_stats() for the simple case of doing both in one go: mlxsw_sp_qdisc_get_class_stats(). Dispatch to that function from mlxsw_sp_qdisc_get_red_stats(). This new function will be useful for other leaf Qdiscs as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Extract a per-TC stat functionPetr Machata
Extract from mlxsw_sp_qdisc_get_prio_stats() two new functions: mlxsw_sp_qdisc_collect_tc_stats() to accumulate stats for that one TC only, and mlxsw_sp_qdisc_update_stats() that makes the stats relative to base values stored earlier. Use them from mlxsw_sp_qdisc_get_red_stats(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25hv_netvsc: Add XDP supportHaiyang Zhang
This patch adds support of XDP in native mode for hv_netvsc driver, and transparently sets the XDP program on the associated VF NIC as well. Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to VF NIC automatically. Setting / unsetting XDP program on VF NIC directly is not recommended, also not propagated to synthetic NIC, and may be overwritten by setting of synthetic NIC. The Azure/Hyper-V synthetic NIC receive buffer doesn't provide headroom for XDP. We thought about re-use the RNDIS header space, but it's too small. So we decided to copy the packets to a page buffer for XDP. And, most of our VMs on Azure have Accelerated Network (SRIOV) enabled, so most of the packets run on VF NIC. The synthetic NIC is considered as a fallback data-path. So the data copy on netvsc won't impact performance significantly. XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO before running XDP: ethtool -K eth0 lro off XDP actions not yet supported: XDP_REDIRECT Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: fddi: skfp: Use print_hex_dump() helperAndy Shevchenko
Use the print_hex_dump() helper, instead of open-coding the same operations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23Merge tag 'mlx5-updates-2020-01-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-01-22 This series provides updates to mlx5 driver. 1) Misc small cleanups 2) Some SW steering updates including header copy support 3) Full ethtool statistics support for E-Switch uplink representor Some refactoring was required to share the bare-metal NIC ethtool stats with the Uplink representor. On Top of this Vlad converts the ethtool stats support in E-Swtich vports representors to use the mlx5e "stats groups" infrastructure and then applied all applicable stats to the uplink representor netdev. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: phy: DP83822: Add support for additional DP83825 devicesDan Murphy
Add PHY IDs for the DP83825CS, DP83825CM and the DP83825S devices to the DP83822 driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23phy: dp83826: Add phy IDs for DP83826N and 826NCDan Murphy
Add phy IDs to the DP83822 phy driver for the DP83826N and the DP83826NC devices. The register map and features are the same for basic enablement. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: convert suitable drivers to use phy_do_ioctl_runningHeiner Kallweit
Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Timur Tabi <timur@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-01-22 The following pull-request contains BPF updates for your *net-next* tree. We've added 92 non-merge commits during the last 16 day(s) which contain a total of 320 files changed, 7532 insertions(+), 1448 deletions(-). The main changes are: 1) function by function verification and program extensions from Alexei. 2) massive cleanup of selftests/bpf from Toke and Andrii. 3) batched bpf map operations from Brian and Yonghong. 4) tcp congestion control in bpf from Martin. 5) bulking for non-map xdp_redirect form Toke. 6) bpf_send_signal_thread helper from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22net/mlx5e: Enable all available stats for uplink repsVlad Buslov
Extend stats group array of uplink representor with all stats that are available for PF in legacy mode, besides ipsec and TLS which are not supported. Don't output vport stats for uplink representor because they are already handled by 802_3 group (with different names: {tx|rx}_{bytes|packets}_phy). Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Create q counters on uplink representorsVlad Buslov
Q counters were disabled for all types of representors to prevent an issue where there is not enough resources to init q counters for 127 representor instances. Enable q counters only for uplink representors to support "rx_out_of_buffer", "rx_if_down_packets" counters in ethtool. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Convert rep stats to mlx5e_stats_grp-based infraVlad Buslov
In order to support all of the supported stats that are available in legacy mode for switchdev uplink representors, convert rep stats infrastructure to reuse struct mlx5e_stats_grp that is already used when device is in legacy mode. Refactor rep code to use array of mlx5e_stats_grp structures (constructed using macros provided by stats infra) to fill/update stats, instead of fixed hardcoded set of values. This approach allows to easily extend representors with new stats types. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: IPoIB, use separate stats groupsSaeed Mahameed
Don't copy all of the stats groups used for mlx5e ethernet NIC profile, have a separate stats groups for IPoIB with the set of the needed stats only. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Convert stats groups array to array of group pointersSaeed Mahameed
Convert stats groups array to array of "stats group" pointers to allow sharing and individual selection of groups per profile as illustrated in the next patches. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2020-01-22net/mlx5e: Declare stats groups via macroSaeed Mahameed
Introduce new macros to declare stats callbacks and groups, for better code reuse and for individual groups selection per profile which will be introduced in next patches. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2020-01-22net/mlx5e: Profile specific stats groupsSaeed Mahameed
Attach stats groups array to the profiles and make the stats utility functions (get_num, update, fill, fill_strings) generic and use the profile->stats_grps rather the hardcoded NIC stats groups. This will allow future extension to have per profile stats groups. In this patch mlx5e NIC and IPoIB will still share the same stats groups. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2020-01-22net/mlx5e: Move uplink rep init/cleanup code into own functionsRoi Dayan
Clean up the code and allows to call uplink rep init/cleanup from different location later. To be used later for a new uplink representor mode. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: DR, Allow connecting flow table to a lower/same level tableYevgeny Kliteynik
Allow connecting SW steering source table to a lower/same level destination table. Lifting this limitation is required to support Connection Tracking. Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: DR, Modify header copy supportHamdan Igbaria
Modify header supports ADD/SET and from this patch also COPY. Copy allows to copy header fields and metadata. Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: DR, Modify set action limitation extensionHamdan Igbaria
Modify set actions are not supported on both tx and rx, added a check for that. Also refactored the code in a way that every modify action has his own functions, this needed so in the future we could add copy action more smoothly. Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Add mlx5e_flower_parse_meta supportwenxu
In the flowtables offload all the devices in the flowtables share the same flow_block. An offload rule will be installed on all the devices. This scenario is not correct. It is no problem if there are only two devices in the flowtable, The rule with ingress and egress on the same device can be reject by driver. But more than two devices in the flowtable will install the wrong rules on hardware. For example: Three devices in a offload flowtables: dev_a, dev_b, dev_c A rule ingress from dev_a and egress to dev_b: The rule will install on device dev_a. The rule will try to install on dev_b but failed for ingress and egress on the same device. The rule will install on dev_c. This is not correct. The flowtables offload avoid this case through restricting the ingress dev with FLOW_DISSECTOR_KEY_META. So the mlx5e driver also should support the FLOW_DISSECTOR_KEY_META parse. Signed-off-by: wenxu <wenxu@ucloud.cn> Acked-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5: make the symbol 'ESW_POOLS' staticChen Wandun
Fix the following sparse warning: drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads_chains.c:35:20: warning: symbol 'ESW_POOLS' was not declared. Should it be static? Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities") Signed-off-by: Chen Wandun <chenwandun@huawei.com> Acked-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: allow TSO on VXLAN over VLAN topologiesDavide Caratti
since mlx5 hardware can segment correctly TSO packets on VXLAN over VLAN topologies, CPU usage can improve significantly if we enable tunnel offloads in dev->vlan_features, like it was done in the past with other NIC drivers (e.g. mlx4, be2net and ixgbe). Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net/mlx5e: Fix printk format warningOlof Johansson
Use "%zu" for size_t. Seen on ARM allmodconfig: drivers/net/ethernet/mellanox/mlx5/core/wq.c: In function 'mlx5_wq_cyc_wqe_dump': include/linux/kern_levels.h:5:18: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'size_t' {aka 'unsigned int'} [-Wformat=] Fixes: 130c7b46c93d ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events") Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-22net: convert additional drivers to use phy_do_ioctlHeiner Kallweit
The first batch of driver conversions missed a few cases where we can use phy_do_ioctl too. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21drivers: net: declance: fix comparing pointer to 0Chen Zhou
Fixes coccicheck warning: ./drivers/net/ethernet/amd/declance.c:611:14-15: WARNING comparing pointer to 0 Replace "skb == 0" with "!skb". Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21hdlx_x25: Fix backwards compat test.David S. Miller
drivers/net/wan/hdlc_x25.c: In function ‘x25_ioctl’: drivers/net/wan/hdlc_x25.c:256:7: warning: suggest parentheses around assignment used as truth value [-Wparentheses] 256 | if (ifr->ifr_settings.size = 0) { | ^~~ Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: cleanup some coding style issueHuazhong Tan
This patch removes some unnecessary return value assignments, some duplicated printing in the caller, refines the judgment of 0 and uses le16_to_cpu to replace __le16_to_cpu. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: remove redundant print on ENOMEMHuazhong Tan
All kmalloc-based functions print enough information on failures. So this patch removes the log in hclge_get_dfx_reg() when returns ENOMEM. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: delete unnecessary blank line and space for cleanupGuangbin Huang
This patch deletes some unnecessary blank lines and spaces to clean up code, and in hclgevf_set_vlan_filter() moves the comment to the front of hclgevf_send_mbx_msg(). Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: rewrite a log in hclge_put_vector()Yonglong Liu
When gets vector fails, hclge_put_vector() should print out the vector instead of vector_id in the log and return the wrong vector_id to its caller. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: refine the input parameter 'size' for snprintf()Guojia Liao
The function snprintf() writes at most size bytes (including the terminating null byte ('\0') to str. Now, We can guarantee that the parameter of size is lager than the length of str to be formatting including its terminating null byte. So it's unnecessary to minus 1 for the input parameter 'size'. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: move duplicated macro definition into headerGuojia Liao
Macro HCLGE_GET_DFX_REG_TYPE_CNT in hclge_dbg_get_dfx_bd_num() and macro HCLGE_DFX_REG_BD_NUM in hclge_get_dfx_reg_bd_num() have the same meaning, so just defines HCLGE_GET_DFX_REG_TYPE_CNT in hclge_main.h. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: set VF's default reset_type to HNAE3_NONE_RESETHuazhong Tan
reset_type means what kind of reset the driver is handling now, so after initializing or reset, the reset_type of VF should be set to HNAE3_NONE_RESET, otherwise, this unknown default value may be a little misleading when the device is running. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: do not reuse pfmemalloc pagesYunsheng Lin
HNS3 driver allocates pages for DMA with dev_alloc_pages(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, HNS3 can get pages with pfmemalloc flag set. So do not reuse the pages with pfmemalloc flag set because those pages are reserved for special cases, such as low memory case. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: limit the error logging in the hns3_clean_tx_ring()Yunsheng Lin
The error log printed by netdev_err() in the hns3_clean_tx_ring() may spam the kernel log. This patch uses hns3_rl_err() to ratelimit the error log in the hns3_clean_tx_ring(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21wan/hdlc_x25: fix skb handlingMartin Schiller
o call skb_reset_network_header() before hdlc->xmit() o change skb proto to HDLC (0x0019) before hdlc->xmit() o call dev_queue_xmit_nit() before hdlc->xmit() This changes make it possible to trace (tcpdump) outgoing layer2 (ETH_P_HDLC) packets Additionally call skb_reset_network_header() after each skb_push() / skb_pull(). Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21wan/hdlc_x25: make lapb params configurableMartin Schiller
This enables you to configure mode (DTE/DCE), Modulo, Window, T1, T2, N2 via sethdlc (which needs to be patched as well). Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: convert suitable network drivers to use phy_do_ioctlHeiner Kallweit
Convert suitable network drivers to use phy_do_ioctl. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: phy: add new version of phy_do_ioctlHeiner Kallweit
Add a new version of phy_do_ioctl that doesn't check whether net_device is running. It will typically be used if suitable drivers attach the PHY in probe already. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: phy: rename phy_do_ioctl to phy_do_ioctl_runningHeiner Kallweit
We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: replace snprintf with scnprintf in hns3_update_stringsChen Zhou
snprintf returns the number of bytes that would be written, which may be greater than the the actual length to be written. Here use extra code to handle this. scnprintf returns the number of bytes that was actually written, just use scnprintf to simplify the code. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: replace snprintf with scnprintf in hns3_dbg_cmd_readChen Zhou
The return value of snprintf may be greater than the size of HNS3_DBG_READ_LEN, use scnprintf instead in hns3_dbg_cmd_read. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21Merge tag 'rds-odp-for-5.5' of ↵David S. Miller
https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma Leon Romanovsky says: ==================== Use ODP MRs for kernel ULPs The following series extends MR creation routines to allow creation of user MRs through kernel ULPs as a proxy. The immediate use case is to allow RDS to work over FS-DAX, which requires ODP (on-demand-paging) MRs to be created and such MRs were not possible to create prior this series. The first part of this patchset extends RDMA to have special verb ib_reg_user_mr(). The common use case that uses this function is a userspace application that allocates memory for HCA access but the responsibility to register the memory at the HCA is on an kernel ULP. This ULP acts as an agent for the userspace application. The second part provides advise MR functionality for ULPs. This is integral part of ODP flows and used to trigger pagefaults in advance to prepare memory before running working set. The third part is actual user of those in-kernel APIs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-05-29 10:01:20 +0000