summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-12-14iwlwifi: move iwl_nvm_check_version() into dvmLuca Coelho
This function is only half-used by mvm (i.e. only the nvm_version part matters, since the calibration version is irrelevant), so it's pointless to export it from iwlwifi. If mvm uses this function, it has the additional complexity of setting the calib version to a bogus value on all cfg structs. To avoid this, move the function to dvm and make a simple comparison of the nvm_version in mvm instead. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: remove useless NVM_HW_SECTION_NUM_FAMILY_* macrosLuca Coelho
These macros are useless because each one of them is used only once and the element they are assigned to is already pretty clear about what they mean, "nvm_hw_section_num". Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: don't define OTP_LOW_IMAGE_SIZE per family, but per sizeLuca Coelho
Using OTP_LOW_IMAGE_SIZE_FAMILY_8000/9000/22000 only obfuscates the actual values, since these 3 are the same. Redefine the values per size so it's easier to understand and compare the different configurations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: mvm: activate apply pointsSara Sharon
Call the previously introduced apply points entry point when reaching an apply point. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: add support for triggering ini triggersSara Sharon
Add support for ini triggers. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: dbg: dump data according to the new ini TLVsSara Sharon
When ini TLVs are loaded, dump data according to the stored configuration. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-14iwlwifi: move common 9000 cfg parameters to common macroLuca Coelho
The ht_params, nvm_ver, nvm_calib_ver and max_ht_ampdu_exponent elements in 9000 devices are always the same. Move them to the common macro. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-13rtlwifi: rtl8821ae: remove set but not used variable 'type' in ↵YueHaibing
translate_rx_signal_stuff Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c: In function 'translate_rx_signal_stuff': drivers/net/wireless/realtek/rtlwifi/rtl8821ae/trx.c:309:6: warning: variable 'type' set but not used [-Wunused-but-set-variable] It never used since commit 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13rtl818x: fix potential use after freePan Bian
entry is released via usb_put_urb just after calling usb_submit_urb. However, entry is used if the submission fails, resulting in a use after free bug. The patch fixes this. Signed-off-by: Pan Bian <bianpan2016@163.com> ACKed-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13b43: remove set but not used variables 'tx_pwr_state,tmp2'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/broadcom/b43/phy_n.c: In function 'b43_nphy_op_recalc_txpower': drivers/net/wireless/broadcom/b43/phy_n.c:5898:7: warning: variable 'tx_pwr_state' set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/b43/phy_n.c:6047:20: warning: variable 'tmp2' set but not used [-Wunused-but-set-variable] 'tx_pwr_state' never used since introduction in commit 8615eb2870f1 ("b43: N-PHY: support setting custom TX power") 'tmp2' not used any more since commit c002831a07dd ("b43: N-PHY: use helper for checking IPA") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: fix false-positive -Wmaybe-unintialized warningArnd Bergmann
When CONFIG_NO_AUTO_INLINE is set, we get a false-postive warning for the brcmf_fw_request_nvram_done() function, after gcc figures out that brcmf_fw_nvram_from_efi() might not set the 'data_len' variable, but fails to notice that it always returns NULL: drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c: In function 'brcmf_fw_request_nvram_done': drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c:560:11: error: 'data_len' may be used uninitialized in this function [-Werror=maybe-uninitialized] Mark it 'inline' to force gcc to understand this. Fixes: ce2e6db554fa ("brcmfmac: Add support for getting nvram contents from EFI variables") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: disable command decode in sdio_aosWright Feng
AOS is a part of the SDIOD core that becomes active when the rest of SDIOD is sleeping to keep SDIO bus alive responding to reduced set of commands. Transaction between AOS and SDIOD is not protected, and if cmd 52 is received in AOS and in the middle of response state changed from AOS to SDIOD, response is corrupted and it causes to SDIO Host controller to hang. Command decode for below chips are disabled in this commit: - 4339 - 4345 - 4354 - 4373 Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: 4373 save-restore supportChi-Hsien Lin
Use chipcommon sr_control0 register to check 4373 sr support. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: update 43012 F2 watermark setting to fix DMA Error during UDP RX ↵Naveen Gupta
Traffic The number of words that the read FIFO has to contain except the end of frame before sends data back to the host. Max watermark = (512B - 2* (BurstLength))/4 = (512 - 128)/4 = 384/4 = 0x60 so if burst length (i.e. BurstLength = 64) is increased, watermark has to be reduced. This is the optimal setting for this chip. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Naveen Gupta <naveen.gupta@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: allow GCI core enumurationChi-Hsien Lin
GCI core is needed for ULP operation. Allow GCI core enumuration with below changes: - Allow GCI to be added to core list even when it doesn't have a wrapper. - Allow 8K address space size. - Don't overwrite the address value when an additional size descriptor is in place. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add support for CYW43012 SDIO chipsetChi-Hsien Lin
CYW43012 is a 1x1 802.11a/b/g/n Dual-Band HT20, 256-QAM/Turbo QAM. It is an Ultra Low Power WLAN+BT combo chip. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Praveen Babu C <praveen.chandran@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: set SDIO F1 MesBusyCtrl for CYW4373Madhan Mohan R
Along with F2 watermark (existing) configuration, F1 MesBusyCtrl should be enabled & sdio device RX FIFO watermark should be configured to avoid overflow errors. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: set F2 watermark to 256 for 4373Wright Feng
We got SDIO_CRC_ERROR with 4373 on SDR104 when doing bi-directional throughput test. Enable watermark to 256 to guarantee the operation stability. Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add 4354 raw pcie device idWinnie Chang
Add the raw 4354 PCIe device ID for unprogrammed Cypress boards. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Winnie Chang <winnie.chang@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: handle compressed tx status signalChung-Hsien Hsu
Firmware inform the driver about tx status by normal tx status signal or compressed tx status signal. This patch adds support to handle the compressed tx status signal. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: enable frameburst mode in default firmware settingWright Feng
The frameburst feature can enable per-packet framebursting in firmware side and get higher TX throughput in High Throughput(HT) mode. To enhance TX throughput, we enable frameburst mode in default firmware setting. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13brcmfmac: add credit numbers updating supportWright Feng
The credit numbers are static and tunable per chip in firmware side. However the credit number may be changed that is based on packet pool length and will send BRCMF_E_FIFO_CREDIT_MAP event to notify host driver updates the credit numbers during interface up. The purpose of this patch is making host driver has ability of updating the credit numbers when receiving the BRCMF_E_FIFO_CREDIT_MAP event. Signed-off-by: Wright Feng <wright.feng@cypress.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: add NL80211_STA_INFO_RX_BITRATE supportBrian Norris
Comparing the existing TX_BITRATE parsing code (in mwifiex_parse_htinfo()) with the RX bitrate histograms in debugfs.c, it appears that the rxpd_rate and rxpd_htinfo fields have the same format. At least, they give reasonable results when I parse them this way. So this patch adds support for RX_BITRATE to our station info dump. Along the way, I add legacy bitrate parsing into the same function, using the debugfs code (mwifiex_histogram_read() and mwifiex_adjust_data_rate()) as reference. Additionally, to satisfy the requirements of NL80211_STA_INFO_RX_BITRATE, I skip logging the bitrate of multicast packets. This shouldn't add a lot of overhead to the RX path, as there are already several similar 802.3 header checks in this same codepath. We can also bias the branch behavior to favor unicast, as that's the common performance-sensitive case. I'd consider this support somewhat experimental, as I have zero documentation from Marvell. But the existing driver code gives me good reason to think this is correct. I've tested this on a few different 802.11{a,b,g,n,ac} networks, and the reported bitrates look good to me. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: refactor mwifiex_parse_htinfo() for reuseBrian Norris
This function converts some firmware-specific parameters into cfg80211 'rate_info' structures. It currently assumes it's dealing only with TX bitrate, but the RX bitrate looks to be the same, so refactor this function to be reusable. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: debugfs: correct histogram spacing, formattingBrian Norris
Currently, snippets of this file look like: rx rates (in Mbps): 0=1M 1=2M2=5.5M 3=11M 4=6M 5=9M 6=12M 7=18M 8=24M 9=36M 10=48M 11=54M12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40) 44-53=MCS0-9(VHT:BW20)54-63=MCS0-9(VHT:BW40)64-73=MCS0-9(VHT:BW80) ... noise_flr[--96dBm] = 22 noise_flr[--95dBm] = 149 noise_flr[--94dBm] = 9 noise_flr[--93dBm] = 2 We're missing some spaces, and we're adding a minus sign ('-') on values that are already negative signed integers. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13mwifiex: fix potential NULL dereference and use after freePan Bian
There are two defects: (1) passing a NULL bss to mwifiex_save_hidden_ssid_channels will result in NULL dereference, (2) using bss after dropping the reference to it via cfg80211_put_bss. To fix them, the patch moves the buggy code to the branch that bss is not NULL and puts it before cfg80211_put_bss. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-13Merge tag 'mt76-for-kvalo-2018-11-30' of https://github.com/nbd168/wirelessKalle Valo
first batch of mt76 patches for 4.21 * use the same firmware for mt76x2e and mt76x2u * mt76x2 fixes * mt76x0 fixes * mt76x0e survey support * more unification between mt76x2 and mt76x0 * mt76x0e AP mode support * mt76x0e DFS support * rework and fix tx status handling for mt76x0 and mt76x2 kvalo: fixed a conflict in drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c and a build problem in drivers/net/wireless/mediatek/mt76/mt76x02_util.c
2018-12-03net: marvell: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: qca_spi: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: stmmac: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03nfp: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/mlx4_core: Fix several coding style errorsErez Alfasi
Fix 3 checkpatch errors within mlx4/main.c: - Unnecessary mlx4_debug_level global variable initialization to 0. - Prohibited space before comma. - Whitespaces instead of tab. Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net/mlx4_core: Fix return codes of unsupported operationsErez Alfasi
Functions __set_port_type and mlx4_check_port_params returned -EINVAL while the proper return code is -EOPNOTSUPP as a result of an unsupported operation. All drivers should generate this and all users should check for it when detecting an unsupported functionality. Signed-off-by: Erez Alfasi <ereza@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: phy: Also request modules for C45 IDsJose Abreu
Logic of phy_device_create() requests PHY modules according to PHY ID but for C45 PHYs we use different field for the IDs. Let's also request the modules for these IDs. Changes from v1: - Only request C22 modules if C45 are not present (Andrew) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Joao Pinto <joao.pinto@synopsys.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Enable mkex profileVamsi Attunuru
The following set of NPC registers allow the driver to configure NPC to generate different key value schemes to compare against packet payload in MCAM search. NPC_AF_INTF(0..1)_KEX_CFG NPC_AF_KEX_LDATA(0..1)_FLAGS_CFG NPC_AF_INTF(0..1)_LID(0..7)_LT(0..15)_LD(0..1)_CFG NPC_AF_INTF(0..1)_LDATA(0..1)_FLAGS(0..15)_CFG Currently, the AF driver populates these registers to configure the default values to address the most common use cases such as key generation for channel number + DMAC. The secure firmware stores different configuration value of these registers to enable different NPC use case along with the name for the lookup. Patch loads profile binary from secure firmware over the exiting CGX mailbox interface and apply the profile. AF driver shall fall back to the default configuration in case of any errors. The AF consumer driver can know the selected profile on response to NPC_GET_KEX_CFG mailbox by introducing mkex_pfl_name in the struct npc_get_kex_cfg_rsp. Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Add LSO format configuration mailboxNithin Dabilpuram
NIX_AF_LSO_FORMAT(0..31)_FIELD(0..7) register enables an SW defined means to define LSO packet modification formats. 0..31 works as an index to choose the algorithm, On success, the mailbox returns the index to the client of chosen LSO algorithm selection. This index will be used in configuring the transmit descriptors. Add mailbox interface to dynamically reserve and configure LSO format. This commit also fixes 'sizem1' for NIX_LSOALG_TCP_FLAGS to '1' i.e 2 Bytes. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Add L3 and L4 packet verification mailboxVidhya Raman
Adds mailbox support for L4 checksum verification and L3 and L4 length verification configuration. Signed-off-by: Vidhya Raman <vraman@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Configure VLAN TPIDsNithin Dabilpuram
Setup TPID's for vlan0 and vlan1 for Tx VLAN insertion offloads. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Add support for Tx packet markingKrzysztof Kanas
NIX_AF_MARK_FORMAT(0..127)_CTL register enables an SW defined means to mark/insert various data in the packet based on final packet color from traffic shaping HW. 0..127 works as an index to choose the algorithm. On success, the mailbox returns the index to the client. Add NIX_MARK_FORMAT_CFG mailbox which reserves mark format based on tuple (offset, y_mask, y_val, r_mask, r_val) If the tuple is requested again for mark format that was already reserved, then it will be reused. If not it will reserve a new entry if space is available. Also on AF init commonly used marker format such as VLAN DEI, IPv4 ECN, IPv4 DSCP are reserved for AF consumers. Signed-off-by: Krzysztof Kanas <kkanas@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Enable RSS with promiscuous modeVamsi Attunuru
This patch adds support for enabling RSS in promiscuous mode if RSS is already requested by the AF client. Signed-off-by: Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Define all NIX_AF_RX_DEF_* registersJerin Jacob
In order to support all NIX specific valid length errors and checksum errors on Rx, Update all NIX_AF_RX_DEF_* registers. Also sorted all registers in HRM definition order. Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Enable inner IPv4 checksum and its error codeJerin Jacob
This patch enables the inner IPv4 checksum and defines the error code for Rx inner and outer checksum errors. Setting ERRCODE as 1 so that CQE descriptor can be embedded valid checksum error code and the driver can interpret checksum error as ERRLEV = LID + 1 and ERRCODE = 1. Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Allow freeing single TLx Tx schedule queueNithin Dabilpuram
The default behavior was to free all the TLx Tx schedule queues. This patch adds support for freeing a single Tx schedule queue if TXSCHQ_FREE_ALL flag is not set. Signed-off-by: Krzysztof Kanas <kkanas@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Restrict TL1 allocation and configurationNithin Dabilpuram
TL1 is the root node in the scheduling hierarchy and it is a global resource with a limited number. This patch introduces restriction and validation on the allocation of the TL1 nodes for the effective resource sharing across the AF consumers. - Limit TL1 allocation to 2 per lmac. One could be for the normal link and one for IEEE802.3br express link (Express Send DMA). Effectively all the VF's of an RVU PF(lmac) share the two TL1 schqs. - TL1 cannot be freed once allocated. - Allow VF's to only apply default config to TL1 if not already applied. PF's can always overwrite the TL1 config. - Consider NIX_AQ_INSTOP_WRITE while validating txschq when sq.ena is set. Signed-off-by: Krzysztof Kanas <kkanas@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Add support for runtime RSS algo index reservationJerin Jacob
Introduced reserve_flowkey_alg_idx()to reserve RSS algorithm index, it would internally use set_flowkey_fields() to generate fields based on the flow key dynamically. On AF driver init, it would reserve a predefined set RSS algo indexes, which will be available all the time for all the AF driver consumers. The leftover algo indexes can be reserved at runtime through exiting nix_rss_flowkey_cfg mailbox message. The NIX_FLOW_KEY_TYPE_PORT is removed from predefined a set of RSS flow type as it is not used by any consumer. Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Add support for dynamic flow cfg to RSS field generationJerin Jacob
Introduce state-based algorithm to convert the flow_key value to RSS algo field used by NIX_AF_RX_FLOW_KEY_ALGX_FIELDX register. The outer `for loop` goes over _all_ protocol field and the following variables depict the state machine forward progress logic. a) keyoff_marker - Enabled when hash byte length needs to be accounted in field->key_offset update. b) field_marker - Enabled when a new field needs to be selected. c) group_member - Enabled when a protocol is part of a group. This would remove the existing hard coding and enable to add new protocol support seamlessly. Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Add response for RSS flow key cfg messageJerin Jacob
Added response for nix_rss_flowkey_cfg message to return selected RSS algorithm index. The FLOW_KEY_TYPE* definition is part of the mbox message and it will be used by the other consumers of AF driver hence moving to mbox.h. Also renamed FLOW_* definitions to NIX_FLOW_* to avoid global name space collisions, as we have various coming from include/uapi/linux/pkt_cls.h for example. Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03octeontx2-af: Skip NIXLF check for bcast MCE entrySunil Goutham
At the time of initial broadcast packet replication table init, NIXLFs are not yet attached to PF_FUNCs. Hence skipped checking NIXLF while submitting MCE entry init instruction to NIX admin queue. Also did a minor cleanup while installing bcast match entry in packet parser unit i.e NPC. Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03Merge tag 'wireless-drivers-next-for-davem-2018-11-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 First set of patches for 4.21. Most notable here is support for Quantenna's QSR1000/QSR2000 chipsets and more flexible ways to provide nvram files for brcmfmac. Major changes: brcmfmac * add support for first trying to get a board specific nvram file * add support for getting nvram contents from EFI variables qtnfmac * use single PCIe driver for all platforms and rename Kconfig option CONFIG_QTNFMAC_PEARL_PCIE to CONFIG_QTNFMAC_PCIE * add support for QSR1000/QSR2000 (Topaz) family of chipsets ath10k * add support for WCN3990 firmware crash recovery * add firmware memory dump support for QCA4019 wil6210 * add firmware error recovery while in AP mode ath9k * remove experimental notice from dynack feature iwlwifi * PCI IDs for some new 9000-series cards * improve antenna usage on connection problems * new firmware debugging infrastructure * some more work on 802.11ax * improve support for multiple RF modules with 22000 devices cordic * move cordic macros and defines to a public header file * convert brcmsmac and b43 to fully use cordic library ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: davinci_emac: use nvmem_get_mac_address()Bartosz Golaszewski
All DaVinci boards still supported in board files now define nvmem cells containing the MAC address. We want to stop using the setup callback from at24 so the MAC address for those users will no longer be provided over platform data. If we didn't get a valid MAC in pdata, try nvmem before resorting to a random MAC. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-05-30 17:21:57 +0000