| Age | Commit message (Collapse) | Author |
|---|
|
Add missing exception tracing to XDP when a number of different
errors can occur. The support was only partial. Several errors
where not logged which would confuse the user quite a lot not
knowing where and why the packets disappeared.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add missing exception tracing to XDP when a number of different errors
can occur. The support was only partial. Several errors where not
logged which would confuse the user quite a lot not knowing where and
why the packets disappeared.
Fixes: 74608d17fe29 ("i40e: add support for XDP_TX action")
Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When using native XDP with the igb driver, the XDP frame data doesn't point to
the beginning of the packet. It's off by 16 bytes. Everything works as expected
with XDP skb mode.
Actually these 16 bytes are used to store the packet timestamps. Therefore, pull
the timestamp before executing any XDP operations and adjust all other code
accordingly. The igc driver does it like that as well.
Tested with Intel i210 card and AF_XDP sockets.
Fixes: 9cbc948b5a20 ("igb: add XDP support")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In the case of MDIO bus registration failure due to no external PHY
devices is connected to the MAC, clk_disable_unprepare() is called in
stmmac_bus_clk_config() and intel_eth_pci_probe() respectively.
The second call in intel_eth_pci_probe() will caused the following:-
[ 16.578605] intel-eth-pci 0000:00:1e.5: No PHY found
[ 16.583778] intel-eth-pci 0000:00:1e.5: stmmac_dvr_probe: MDIO bus (id: 2) registration failed
[ 16.680181] ------------[ cut here ]------------
[ 16.684861] stmmac-0000:00:1e.5 already disabled
[ 16.689547] WARNING: CPU: 13 PID: 2053 at drivers/clk/clk.c:952 clk_core_disable+0x96/0x1b0
[ 16.697963] Modules linked in: dwc3 iTCO_wdt mei_hdcp iTCO_vendor_support udc_core x86_pkg_temp_thermal kvm_intel marvell10g kvm sch_fq_codel nfsd irqbypass dwmac_intel(+) stmmac uio ax88179_178a pcs_xpcs phylink uhid spi_pxa2xx_platform usbnet mei_me pcspkr tpm_crb mii i2c_i801 dw_dmac dwc3_pci thermal dw_dmac_core intel_rapl_msr libphy i2c_smbus mei tpm_tis intel_th_gth tpm_tis_core tpm intel_th_acpi intel_pmc_core intel_th i915 fuse configfs snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_pcm snd_timer snd soundcore
[ 16.746785] CPU: 13 PID: 2053 Comm: systemd-udevd Tainted: G U 5.13.0-rc3-intel-lts #76
[ 16.756134] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DRR4 CRB, BIOS ADLIFSI1.R00.1494.B00.2012031421 12/03/2020
[ 16.769465] RIP: 0010:clk_core_disable+0x96/0x1b0
[ 16.774222] Code: 00 8b 05 45 96 17 01 85 c0 7f 24 48 8b 5b 30 48 85 db 74 a5 8b 43 7c 85 c0 75 93 48 8b 33 48 c7 c7 6e 32 cc b7 e8 b2 5d 52 00 <0f> 0b 5b 5d c3 65 8b 05 76 31 18 49 89 c0 48 0f a3 05 bc 92 1a 01
[ 16.793016] RSP: 0018:ffffa44580523aa0 EFLAGS: 00010086
[ 16.798287] RAX: 0000000000000000 RBX: ffff8d7d0eb70a00 RCX: 0000000000000000
[ 16.805435] RDX: 0000000000000002 RSI: ffffffffb7c62d5f RDI: 00000000ffffffff
[ 16.812610] RBP: 0000000000000287 R08: 0000000000000000 R09: ffffa445805238d0
[ 16.819759] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8d7d0eb70a00
[ 16.826904] R13: ffff8d7d027370c8 R14: 0000000000000006 R15: ffffa44580523ad0
[ 16.834047] FS: 00007f9882fa2600(0000) GS:ffff8d80a0940000(0000) knlGS:0000000000000000
[ 16.842177] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 16.847966] CR2: 00007f9882bea3d8 CR3: 000000010b126001 CR4: 0000000000370ee0
[ 16.855144] Call Trace:
[ 16.857614] clk_core_disable_lock+0x1b/0x30
[ 16.861941] intel_eth_pci_probe.cold+0x11d/0x136 [dwmac_intel]
[ 16.867913] pci_device_probe+0xcf/0x150
[ 16.871890] really_probe+0xf5/0x3e0
[ 16.875526] driver_probe_device+0x64/0x150
[ 16.879763] device_driver_attach+0x53/0x60
[ 16.883998] __driver_attach+0x9f/0x150
[ 16.887883] ? device_driver_attach+0x60/0x60
[ 16.892288] ? device_driver_attach+0x60/0x60
[ 16.896698] bus_for_each_dev+0x77/0xc0
[ 16.900583] bus_add_driver+0x184/0x1f0
[ 16.904469] driver_register+0x6c/0xc0
[ 16.908268] ? 0xffffffffc07ae000
[ 16.911598] do_one_initcall+0x4a/0x210
[ 16.915489] ? kmem_cache_alloc_trace+0x305/0x4e0
[ 16.920247] do_init_module+0x5c/0x230
[ 16.924057] load_module+0x2894/0x2b70
[ 16.927857] ? __do_sys_finit_module+0xb5/0x120
[ 16.932441] __do_sys_finit_module+0xb5/0x120
[ 16.936845] do_syscall_64+0x42/0x80
[ 16.940476] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 16.945586] RIP: 0033:0x7f98830e5ccd
[ 16.949177] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 31 0c 00 f7 d8 64 89 01 48
[ 16.967970] RSP: 002b:00007ffc66b60168 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 16.975583] RAX: ffffffffffffffda RBX: 000055885de35ef0 RCX: 00007f98830e5ccd
[ 16.982725] RDX: 0000000000000000 RSI: 00007f98832541e3 RDI: 0000000000000012
[ 16.989868] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000000
[ 16.997042] R10: 0000000000000012 R11: 0000000000000246 R12: 00007f98832541e3
[ 17.004222] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc66b60328
[ 17.011369] ---[ end trace df06a3dab26b988c ]---
[ 17.016062] ------------[ cut here ]------------
[ 17.020701] stmmac-0000:00:1e.5 already unprepared
Removing the stmmac_bus_clks_config() call in stmmac_dvr_probe and let
dwmac-intel to handle the unprepare and disable of the clk device.
Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.
Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When a driver's profile doesn't support a dedicated PTP-RQ,
configuration of CQE compression while HW TS is configured should fail.
Fixes: 885b8cfb161e ("net/mlx5e: Update ethtool setting of CQE compression")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When the driver's profile doesn't support a dedicated PTP-RQ, the PTP
accuracy of HW TS is affected by the CQE compression. In this case,
turn off CQE compression. Otherwise, the driver crashes:
BUG: kernel NULL pointer dereference, address:0000000000000018
...
...
RIP: 0010:mlx5e_ptp_rx_set_fs+0x25/0x1a0 [mlx5_core]
...
...
Call Trace:
mlx5e_ptp_activate_channel+0xb2/0xf0 [mlx5_core]
mlx5e_activate_priv_channels+0x3b9/0x8c0 [mlx5_core]
? __mutex_unlock_slowpath+0x45/0x2a0
? mlx5e_refresh_tirs+0x151/0x1e0 [mlx5_core]
mlx5e_switch_priv_channels+0x1cd/0x2d0 [mlx5_core]
? mlx5e_xdp_allowed+0x150/0x150 [mlx5_core]
mlx5e_safe_switch_params+0x118/0x3c0 [mlx5_core]
? __mutex_lock+0x6e/0x8e0
? mlx5e_hwstamp_set+0xa9/0x300 [mlx5_core]
mlx5e_hwstamp_set+0x194/0x300 [mlx5_core]
? dev_ioctl+0x9b/0x3d0
mlx5i_ioctl+0x37/0x60 [mlx5_core]
mlx5i_pkey_ioctl+0x12/0x20 [mlx5_core]
dev_ioctl+0xa9/0x3d0
sock_ioctl+0x268/0x420
__x64_sys_ioctl+0x3d8/0x790
? lockdep_hardirqs_on_prepare+0xe4/0x190
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 960fbfe222a4 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
On some devices the ignore flow level cap is not supported and we
shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft()
already gives the correct end ft if ignore flow level cap is supported
or not.
Fixes: 39ac237ce009 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If not supported show an error and return instead of trying to offload
to the hardware and fail.
Fixes: 699e96ddf47f ("net/mlx5e: Support offloading tc double vlan headers match")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In case driver sent NACK to firmware on sync reset request, it will get
sync reset abort event while it didn't set sync reset requested mode.
Thus, on abort sync reset event handler, driver should check reset
requested is set before trying to stop sync reset poll.
Fixes: 7dd6df329d4c ("net/mlx5: Handle sync reset abort event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
TLS offload is not supported in switchdev mode.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Device supports setting of a single fec mode at a time, enforce this
by bitmap_weight == 1. Input from fec command is in u32, avoid cast to
unsigned long and use bitmap_from_arr32 to populate bitmap safely.
Fixes: 4bd9d5070b92 ("net/mlx5e: Enforce setting of a single FEC mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'status'.
Eliminate the follow smatch warning:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:3818 myri10ge_probe()
warn: missing error code 'status'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case of merge, the page passed into page_to_skb() may be a head
page, not the page where the current data is located. So when trying to
get the buf where the data is located, we should get buf based on
headroom instead of offset.
This patch solves this problem. But if you don't use this patch, the
original code can also run, because if the page is not the page of the
current data, the calculated tailroom will be less than 0, and will not
enter the logic of build_skb() . The significance of this patch is to
modify this logical problem, allowing more situations to use
build_skb().
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In merge mode, when xdp is enabled, if the headroom of buf is smaller
than virtnet_get_headroom(), xdp_linearize_page() will be called but the
variable of "headroom" is still 0, which leads to wrong logic after
entering page_to_skb().
[ 16.600944] BUG: unable to handle page fault for address: ffffecbfff7b43c8[ 16.602175] #PF: supervisor read access in kernel mode
[ 16.603350] #PF: error_code(0x0000) - not-present page
[ 16.604200] PGD 0 P4D 0
[ 16.604686] Oops: 0000 [#1] SMP PTI
[ 16.605306] CPU: 4 PID: 715 Comm: sh Tainted: G B 5.12.0+ #312
[ 16.606429] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/04
[ 16.608217] RIP: 0010:unmap_page_range+0x947/0xde0
[ 16.609014] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[ 16.611863] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[ 16.612720] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[ 16.613853] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[ 16.614976] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[ 16.616124] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[ 16.617276] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[ 16.618423] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[ 16.619738] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 16.620670] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[ 16.621792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 16.622920] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 16.624047] Call Trace:
[ 16.624525] ? release_pages+0x24d/0x730
[ 16.625209] unmap_single_vma+0xa9/0x130
[ 16.625885] unmap_vmas+0x76/0xf0
[ 16.626480] exit_mmap+0xa0/0x210
[ 16.627129] mmput+0x67/0x180
[ 16.627673] do_exit+0x3d1/0xf10
[ 16.628259] ? do_user_addr_fault+0x231/0x840
[ 16.629000] do_group_exit+0x53/0xd0
[ 16.629631] __x64_sys_exit_group+0x1d/0x20
[ 16.630354] do_syscall_64+0x3c/0x80
[ 16.630988] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 16.631828] RIP: 0033:0x7f1a043d0191
[ 16.632464] Code: Unable to access opcode bytes at RIP 0x7f1a043d0167.
[ 16.633502] RSP: 002b:00007ffe3d993308 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 16.634737] RAX: ffffffffffffffda RBX: 00007f1a044c9490 RCX: 00007f1a043d0191
[ 16.635857] RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
[ 16.636986] RBP: 0000000000000000 R08: ffffffffffffff88 R09: 0000000000000001
[ 16.638120] R10: 0000000000000008 R11: 0000000000000246 R12: 00007f1a044c9490
[ 16.639245] R13: 0000000000000001 R14: 00007f1a044c9968 R15: 0000000000000000
[ 16.640408] Modules linked in:
[ 16.640958] CR2: ffffecbfff7b43c8
[ 16.641557] ---[ end trace bc4891c6ce46354c ]---
[ 16.642335] RIP: 0010:unmap_page_range+0x947/0xde0
[ 16.643135] Code: 00 00 08 00 48 83 f8 01 45 19 e4 41 f7 d4 41 83 e4 03 e9 a4 fd ff ff e8 b7 63 ed ff 4c 89 e0 48 c1 e0 065
[ 16.645983] RSP: 0018:ffffc90002503c58 EFLAGS: 00010286
[ 16.646845] RAX: ffffecbfff7b43c0 RBX: 00007f19f7203000 RCX: ffffffff812ff359
[ 16.647970] RDX: ffff888107778000 RSI: 0000000000000000 RDI: 0000000000000005
[ 16.649091] RBP: ffffea000425e000 R08: 0000000000000000 R09: 3030303030303030
[ 16.650250] R10: ffffffff82ed7d94 R11: 6637303030302052 R12: 7c00000afffded0f
[ 16.651394] R13: 0000000000000001 R14: ffff888119ee7010 R15: 00007f19f7202000
[ 16.652529] FS: 0000000000000000(0000) GS:ffff88842fd00000(0000) knlGS:0000000000000000
[ 16.653887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 16.654841] CR2: ffffecbfff7b43c8 CR3: 0000000103220005 CR4: 0000000000370ee0
[ 16.655992] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 16.657150] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 16.658290] Kernel panic - not syncing: Fatal exception
[ 16.659613] Kernel Offset: disabled
[ 16.660234] ---[ end Kernel panic - not syncing: Fatal exception ]---
Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixed link does not need mdio bus and in that case mdio_bus_data will
not be allocated. Before using mdio_bus_data we should check for NULL.
This patch fix the kernel panic due to NULL pointer dereference of
mdio_bus_data when it is not allocated.
Without this patch we do see following kernel crash caused due to kernel
NULL pointer dereference.
Call trace:
stmmac_dvr_probe+0x3c/0x10b0
dwc_eth_dwmac_probe+0x224/0x378
platform_probe+0x68/0xe0
really_probe+0x130/0x3d8
driver_probe_device+0x68/0xd0
device_driver_attach+0x74/0x80
__driver_attach+0x58/0xf8
bus_for_each_dev+0x7c/0xd8
driver_attach+0x24/0x30
bus_add_driver+0x148/0x1f0
driver_register+0x64/0x120
__platform_driver_register+0x28/0x38
dwc_eth_dwmac_driver_init+0x1c/0x28
do_one_initcall+0x78/0x158
kernel_init_freeable+0x1f0/0x244
kernel_init+0x14/0x118
ret_from_fork+0x10/0x30
Code: f9002bfb 9113e2d9 910e6273 aa0003f7 (f9405c78)
---[ end trace 32d9d41562ddc081 ]---
Fixes: e5e5b771f684 ("net: stmmac: make in-band AN mode parsing is supported for non-DT")
Signed-off-by: Sriranjani P <sriranjani.p@samsung.com>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Link: https://lore.kernel.org/r/20210528071056.35252-1-sriranjani.p@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface
ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- ethtool: stats: fix a copy-paste error - init correct array size
Previous releases - regressions:
- sched: fix packet stuck problem for lockless qdisc
- net: really orphan skbs tied to closing sk
- mlx4: fix EEPROM dump support
- bpf: fix alu32 const subreg bound tracking on bitwise operations
- bpf: fix mask direction swap upon off reg sign change
- bpf, offload: reorder offload callback 'prepare' in verifier
- stmmac: Fix MAC WoL not working if PHY does not support WoL
- packetmmap: fix only tx timestamp on request
- tipc: skb_linearize the head skb when reassembling msgs
Previous releases - always broken:
- mac80211: address recent "FragAttacks" vulnerabilities
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to
prevent out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and
isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default"
* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
net: phy: Document phydev::dev_flags bits allocation
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
mptcp: avoid error message on infinite mapping
mptcp: drop unconditional pr_warn on bad opt
mptcp: avoid OOB access in setsockopt()
nfp: update maintainer and mailing list addresses
net: mvpp2: add buffer header handling in RX
bnx2x: Fix missing error code in bnx2x_iov_init_one()
net: zero-initialize tc skb extension on allocation
net: hns: Fix kernel-doc
sctp: fix the proc_handler for sysctl encap_port
sctp: add the missing setting for asoc encap_port
bpf, selftests: Adjust few selftest result_unpriv outcomes
bpf: No need to simulate speculative domain for immediates
bpf: Fix mask direction swap upon off reg sign change
bpf: Wrap aux data inside bpf_sanitize_info container
bpf: Fix BPF_LSM kconfig symbol dependency
selftests/bpf: Add test for l3 use of bpf_redirect_peer
bpftool: Add sock_release help info for cgroup attach/prog load command
net: dsa: microchip: enable phy errata workaround on 9567
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD parsers:
- Fix ofpart subpartitions parsing
Raw NAND:
- Fix external use of SW Hamming ECC helper (txx9ndfmc, tmio,
sharpsl, ndfc, lpc32xx_slc, fsmc, cs553x)"
* tag 'mtd/fixes-for-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: parsers: ofpart: fix parsing subpartitions
mtd: rawnand: txx9ndfmc: Fix external use of SW Hamming ECC helper
mtd: rawnand: tmio: Fix external use of SW Hamming ECC helper
mtd: rawnand: sharpsl: Fix external use of SW Hamming ECC helper
mtd: rawnand: ndfc: Fix external use of SW Hamming ECC helper
mtd: rawnand: lpc32xx_slc: Fix external use of SW Hamming ECC helper
mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper
mtd: rawnand: cs553x: Fix external use of SW Hamming ECC helper
|
|
If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.
Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate the follow smatch warning:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227
bnx2x_iov_init_one() warn: missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:
[ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[ 778.301495] load of value 107 is not a valid value for type '_Bool'
[ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 778.307901] Call Trace:
[ 778.308680] <IRQ>
[ 778.309358] dump_stack+0xbb/0x107
[ 778.310307] ubsan_epilogue+0x5/0x40
[ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48
[ 778.312454] ? memset+0x20/0x40
[ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[ 778.317188] ? create_prof_cpu_mask+0x20/0x20
[ 778.318220] ? arch_stack_walk+0x82/0xf0
[ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb
[ 778.320399] ? stack_trace_save+0x91/0xc0
[ 778.321362] ? stack_trace_consume_entry+0x160/0x160
[ 778.322517] ? lock_release+0x52e/0x760
[ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch]
[ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[ 778.325950] __netif_receive_skb_core+0x771/0x2db0
[ 778.327067] ? lock_downgrade+0x6e0/0x6f0
[ 778.328021] ? lock_acquire+0x565/0x720
[ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0
[ 778.329902] ? inet_gro_receive+0x2a7/0x10a0
[ 778.330914] ? lock_downgrade+0x6f0/0x6f0
[ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0
[ 778.332876] ? lock_release+0x52e/0x760
[ 778.333808] ? dev_gro_receive+0xcc8/0x2380
[ 778.334810] ? lock_downgrade+0x6f0/0x6f0
[ 778.335769] __netif_receive_skb_list_core+0x295/0x820
[ 778.336955] ? process_backlog+0x780/0x780
[ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[ 778.341033] ? kvm_clock_get_cycles+0x14/0x20
[ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0
[ 778.343288] ? __kasan_kmalloc+0x7a/0x90
[ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820
[ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[ 778.349688] ? napi_gro_flush+0x26c/0x3c0
[ 778.350641] napi_complete_done+0x188/0x6b0
[ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[ 778.352853] __napi_poll+0x9f/0x510
[ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[ 778.355158] net_rx_action+0x34c/0xa40
[ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0
[ 778.357083] ? sched_clock_cpu+0x18/0x190
[ 778.358041] ? __common_interrupt+0x8e/0x1a0
[ 778.359045] __do_softirq+0x1ce/0x984
[ 778.359938] __irq_exit_rcu+0x137/0x1d0
[ 778.360865] irq_exit_rcu+0xa/0x20
[ 778.361708] common_interrupt+0x80/0xa0
[ 778.362640] </IRQ>
[ 778.363212] asm_common_interrupt+0x1e/0x40
[ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[ 778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468
[ 778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e
[ 778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb
[ 778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000
[ 778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000
[ 778.378491] ? rcu_eqs_enter.constprop.0+0xb8/0xe0
[ 778.379606] ? default_idle_call+0x5e/0xe0
[ 778.380578] default_idle+0xa/0x10
[ 778.381406] default_idle_call+0x96/0xe0
[ 778.382350] do_idle+0x3d4/0x550
[ 778.383153] ? arch_cpu_idle_exit+0x40/0x40
[ 778.384143] cpu_startup_entry+0x19/0x20
[ 778.385078] start_kernel+0x3c7/0x3e5
[ 778.385978] secondary_startup_64_no_verify+0xb0/0xbb
Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.
Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix function name in hns_ethtool.c kernel-doc comment
to remove these warnings found by clang_w1.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting
prototype for hns_nic_set_link_settings(). Prototype was for
hns_nic_set_link_ksettings() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting
prototype for get_ethtool_stats(). Prototype was for
hns_get_ethtool_stats() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning:
expecting prototype for get_strings(). Prototype was for
hns_get_strings() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 'commit 262b38cdb3e4 ("net: ethernet: hisilicon: hns: use phydev
from struct net_device")'
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot reported memory leak in smsc75xx_bind().
The problem was is non-freed memory in case of
errors after memory allocation.
backtrace:
[<ffffffff84245b62>] kmalloc include/linux/slab.h:556 [inline]
[<ffffffff84245b62>] kzalloc include/linux/slab.h:686 [inline]
[<ffffffff84245b62>] smsc75xx_bind+0x7a/0x334 drivers/net/usb/smsc75xx.c:1460
[<ffffffff82b5b2e6>] usbnet_probe+0x3b6/0xc30 drivers/net/usb/usbnet.c:1728
Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Cc: stable@kernel.vger.org
Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running this sequence of operations:
ip link add br0 type bridge vlan_filtering 1
ip link set swp4 master br0
bridge vlan add dev swp4 vid 1
We observe the traffic sent on swp4 is still untagged, even though the
bridge has overwritten the existing VLAN entry:
port vlan ids
swp4 1 PVID
br0 1 PVID Egress Untagged
This happens because we didn't consider that the 'bridge vlan add'
command just overwrites VLANs like it's nothing. We treat the 'vid 1
pvid untagged' and the 'vid 1' as two separate VLANs, and the first
still has precedence when calling sja1105_build_vlan_table. Obviously
there is a disagreement regarding semantics, and we end up doing
something unexpected from the PoV of the bridge.
Let's actually consider an "existing VLAN" to be one which is on the
same port, and has the same VLAN ID, as one we already have, and update
it if it has different flags than we do.
The first blamed commit is the one introducing the bug, the second one
is the latest on top of which the bugfix still applies.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Fixes: 5899ee367ab3 ("net: dsa: tag_8021q: add a context structure")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One thing became visible when writing the blamed commit, and that was
that STP and PTP frames injected by net/dsa/tag_sja1105.c using the
deferred xmit mechanism are always classified to the pvid of the CPU
port, regardless of whatever VLAN there might be in these packets.
So a decision needed to be taken regarding the mechanism through which
we should ensure that delivery of STP and PTP traffic is possible when
we are in a VLAN awareness mode that involves tag_8021q. This is because
tag_8021q is not concerned with managing the pvid of the CPU port, since
as far as tag_8021q is concerned, no traffic should be sent as untagged
from the CPU port. So we end up not actually having a pvid on the CPU
port if we only listen to tag_8021q, and unless we do something about it.
The decision taken at the time was to keep VLAN 1 in the list of
priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures
that STP and PTP frames can always be sent to the outside world.
However there is a problem. If we do the following while we are in
the best_effort_vlan_filtering=true mode:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1
Then untagged and pvid-tagged frames should be dropped. But we observe
that they aren't, and this is because of the precaution we took that VID
1 is always installed on all ports.
So clearly VLAN 1 is not good for this purpose. What about VLAN 0?
Well, VLAN 0 is managed by the 8021q module, and that module wants to
ensure that 802.1p tagged frames are always received by a port, and are
always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our
STP and PTP frames to be untagged if the stack sent them as untagged -
we don't want the driver to just decide out of the blue that it adds
VID 0 to some packets.
So what to do?
Well, there is one other VLAN that is reserved, and that is 4095:
$ ip link add link swp2 name swp2.4095 type vlan id 4095
Error: 8021q: Invalid VLAN id.
$ bridge vlan add dev swp2 vid 4095
Error: bridge: Vlan id is invalid.
After we made this change, VLAN 1 is indeed forwarded and/or dropped
according to the bridge VLAN table, there are no further alterations
done by the sja1105 driver.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver continues probing when a port is configured for an
unsupported PHY interface type, instead it should stop.
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If any of sja1105_static_config_load(), sja1105_clocking_setup() or
sja1105_devlink_setup() fails, we can't just return in the middle of
sja1105_setup() or memory will leak. Add a cleanup path.
Fixes: 0a7bdbc23d8a ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c")
Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unlike other drivers which pretty much end their .probe() execution with
dsa_register_switch(), the sja1105 does some extra stuff. When that
fails with -ENOMEM, the driver is quick to return that, forgetting to
call dsa_unregister_switch(). Not critical, but a bug nonetheless.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Fixes: a68578c20a96 ("net: dsa: Make deferred_xmit private to sja1105")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
At the beginning of the sja1105_dynamic_config.c file there is a diagram
of the dynamic config interface layout:
packed_buf
|
V
+-----------------------------------------+------------------+
| ENTRY BUFFER | COMMAND BUFFER |
+-----------------------------------------+------------------+
<----------------------- packed_size ------------------------>
So in order to pack/unpack the command bits into the buffer,
sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by
the length of the entry. This is similar to what the other *cmd_packing
functions do.
This bug exists because the command packing function for P/Q/R/S was
copied from the E/T generation, and on E/T, the command was actually
embedded within the entry buffer itself.
Fixes: 94f94d4acfb2 ("net: dsa: sja1105: add static tables for virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().
Fixes: 72dc1c096c70 ("HSO: add option hso driver")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Verify some fields of the USB descriptor to make sure the driver
could be used by the device.
Besides, remove the check of endpoint number in rtl8152_probe().
usb_find_common_endpoints() includes it.
BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa
Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com
Fixes: c2198943e33b ("r8152: search the configuration of vendor mode")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and
fixes for ordering issues on unregistration which have been exposed
through the wider usage of devm_."
* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sc18is602: implement .max_{transfer,message}_size() for the controller
spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
dt-bindings: spi: spi-mux: rename flash node
spi: Don't have controller clean up spi device before driver unbind
spi: Assume GPIO CS active high in ACPI case
spi: sprd: Add missing MODULE_DEVICE_TABLE
spi: Switch to signed types for *_native_cs SPI controller fields
spi: take the SPI IO-mutex in the spi_set_cs_timing method
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
spi: spi-zynq-qspi: Fix stack violation bug
spi: spi-zynq-qspi: Fix kernel-doc warning
spi: altera: Make SPI_ALTERA_CORE invisible
spi: Fix spi device unregister flow
|
|
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/nfc/nfcmrvl follows this syntax, but the content
inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
For e.g., running scripts/kernel-doc -none on drivers/nfc/nfcmrvl/spi.c
causes warning:
warning: expecting prototype for Marvell NFC(). Prototype was for SPI_WAIT_HANDSHAKE() instead
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:
ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other
As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_port_set_vlan_aware.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
registers
If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.
Changed in v2:
- Use netif_running instead of its own flag
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.
Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.
Signed-off-by: Stefan Roese <sr@denx.de>
Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support")
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Reto Schneider <code@reto-schneider.ch>
Cc: Reto Schneider <reto.schneider@husqvarnagroup.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
|
|
Pull block fixes from Jens Axboe:
- Fix BLKRRPART and deletion race (Gulam, Christoph)
- NVMe pull request (Christoph):
- nvme-tcp corruption and timeout fixes (Sagi Grimberg, Keith
Busch)
- nvme-fc teardown fix (James Smart)
- nvmet/nvme-loop memory leak fixes (Wu Bo)"
* tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
block: fix a race between del_gendisk and BLKRRPART
block: prevent block device lookups at the beginning of del_gendisk
nvme-fc: clear q_live at beginning of association teardown
nvme-tcp: rerun io_work if req_list is not empty
nvme-tcp: fix possible use-after-completion
nvme-loop: fix memory leak in nvme_loop_create_ctrl()
nvmet: fix memory leak in nvmet_alloc_ctrl()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a fix for a boot regression when running as PV guest on hardware
without NX support
- a small series fixing a bug in the Xen pciback driver when
configuring a PCI card with multiple virtual functions
* tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: reconfigure also from backend watch handler
xen-pciback: redo VF placement in the virtual topology
x86/Xen: swap NX determination and GDT setup on BSP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- add missing MODULE_DEVICE_TABLE in gpio-cadence
- fix a kernel doc validator error in gpio-xilinx
- don't set parent IRQ affinity in gpio-tegra186
* tag 'gpio-fixes-for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tegra186: Don't set parent IRQ affinity
gpio: xilinx: Correct kernel doc for xgpio_probe()
gpio: cadence: Add missing MODULE_DEVICE_TABLE
|
|
SFC driver can be configured via modparam to work using MSI-X, MSI or
legacy IRQ interrupts. In the last one, the interrupt was not properly
released on module remove.
It was not freed because the flag irqs_hooked was not set during
initialization in the case of using legacy IRQ.
Example of (trimmed) trace during module remove without this fix:
remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1'
WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170
...trimmed...
Call Trace:
unregister_irq_proc+0xe3/0x100
free_desc+0x29/0x70
irq_free_descs+0x47/0x70
mp_unmap_irq+0x58/0x60
acpi_unregister_gsi_ioapic+0x2a/0x40
acpi_pci_irq_disable+0x78/0xb0
pci_disable_device+0xd1/0x100
efx_pci_remove+0xa1/0x1e0 [sfc]
pci_device_remove+0x38/0xa0
__device_release_driver+0x177/0x230
driver_detach+0xcb/0x110
bus_remove_driver+0x58/0xd0
pci_unregister_driver+0x2a/0xb0
efx_exit_module+0x24/0xf40 [sfc]
__do_sys_delete_module.constprop.0+0x171/0x280
? exit_to_user_mode_prepare+0x83/0x1d0
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f9f9385800b
...trimmed...
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a situation where memory allocation or dma mapping fails, an
invalid address is programmed into the descriptor. This can lead
to memory corruption. If the memory allocation fails, DMA should
reuse the previous skb and mapping and drop the packet. This patch
also increments rx drop counter.
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII,
yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's
interface. Move that read until we have properly qualified the PHY
interface mode. This avoids triggering a warning on 7278 platforms that
have GMII ports.
Fixes: 55cfeb396965 ("net: dsa: bcm_sf2: add function finding RGMII register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When updating to latest mainline for some testing on the GARDENA smart
gateway based on the MT7628, I noticed that ethernet does not work any
more. Commit e9229ffd550b ("net: ethernet: mtk_eth_soc: implement
dynamic interrupt moderation") introduced this problem, as it missed the
RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes
this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Fixes: e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation")
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Reto Schneider <code@reto-schneider.ch>
Cc: Reto Schneider <reto.schneider@husqvarnagroup.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- Fix SD-card detection on Intel NUC10i3FNK4 (GL9755)
- Replace WARN_ONCE with dev_warn_once for scatterlist offsets
- Extend check of scatterlist size alignment with SD_IO_RW_EXTENDED
* tag 'mmc-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: increase 1.8V regulator wait
mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignment
mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist offset alignment
|
|
Allow SPI peripherals attached to this controller to know what is the
maximum transfer size and message size, so they can limit their transfer
lengths properly in case they are otherwise capable of larger transfer
sizes. For the sc18is602, this is 200 bytes in both cases, since as far
as I understand, it isn't possible to tell the controller to keep the
chip select asserted after the STOP command is sent.
The controller can support SPI messages larger than 200 bytes if
cs_change is set for individual transfers such that the portions with
chip select asserted are never longer than 200 bytes. What is not
supported is just SPI messages with a continuous chip select larger than
200. I don't think it is possible to express this using the current API,
so drivers which do send SPI messages with cs_change can safely just
look at the max_transfer_size limit.
An example of user for this is sja1105_xfer() in
drivers/net/dsa/sja1105/sja1105_spi.c which sends by default 64 * 4 =
256 byte transfers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210520131238.2903024-3-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For each spi_message, the sc18is602 I2C-to-SPI bridge driver checks the
length of each spi_transfer against 200 (the size of the chip's internal
buffer) minus hw->tlen (the number of bytes transferred so far).
The first byte of the transferred data is the Function ID (the SPI
slave's chip select) and as per the documentation of the chip:
https://www.nxp.com/docs/en/data-sheet/SC18IS602B.pdf
the data buffer is up to 200 bytes deep _without_ accounting for the
Function ID byte.
However, in sc18is602_txrx(), the driver keeps the Function ID as part
of the buffer, and increments hw->tlen from 0 to 1. Combined with the
check in sc18is602_check_transfer, this prevents us from issuing a
transfer that has exactly 200 bytes in size, but only 199.
Adjust the check function to reflect that the Function ID is not part of
the 200 byte deep data buffer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210520131238.2903024-2-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
