summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2014-04-19Input: wacom - override 'pressure_max' with value from HID_USAGE_PRESSUREJason Gerecke
The 0xEC sensor is used in multiple tablet PCs and curiously has versions that report 256 levels of pressure (Samsung Slate 7) as well as versions that report 1024 levels (Lenovo Thinkpad Yoga). To allow both versions to work properly, we allow the value of HID_USAGE_PRESSURE reported to override pressure_max. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-19Input: wacom - use full 32-bit HID Usage value in switch statementJason Gerecke
A HID Usage is a 32-bit value: an upper 16-bit "page" and a lower 16-bit ID. While the two halves are normally reported seperately, only the combination uniquely idenfifes a particular HID Usage. The existing code performs the comparison in two steps, first performing a switch on the ID and then verifying the page within each case. While this works fine, it is very akward to handle two Usages that share a single ID, such as HID_USAGE_PRESSURE and HID_USAGE_X because the case statement can only have a single identifier. To work around this, we now check the full 32-bit HID Usage directly rather than first checking the ID and then the page. This allows the switch statement to have distinct cases for e.g. HID_USAGE_PRESSURE and HID_USAGE_X. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Aaron Skomra <Aaron.Skomra@wacom.com> Reviewed-by: Carl Worth <cworth@cworth.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-19Input: wacom - missed the last bit of expresskey for DTU-1031Ping Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-19Input: ads7846 - fix device usage within attribute showAlexander Stein
With commit e585c40ba (Input: ads7846 - convert to hwmon_device_register_with_groups()) the device passed to the attribute's show function isn't the spi device as before. So fixup the passed device to ads7846_read12_ser. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-19Input: da9055_onkey - remove use of regmap_irq_get_virq()Adam Thomson
Using platform_get_irq_byname() to retrieve the IRQ number returns the VIRQ number rather than the local IRQ number for the device. Passing that value then into regmap_irq_get_virq() causes a failure because the function is expecting the local IRQ number (e.g. 0, 1, 2, 3, etc). This patch removes use of regmap_irq_get_virq() to prevent this failure from happening. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-04-03Merge branch 'next' into for-linusDmitry Torokhov
First round of input updates for 3.15.
2014-04-03Input: edt-ft5x06 - add a missing conditionDan Carpenter
The if condition was accidentally deleted here so we return every time instead of returning on error. Fixes: fd335ab04b3f ('Input: edt-ft5x06 - add support for M09 firmware version') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: appletouch - fix jumps when additional fingers are detectedClinton Sprain
Addresses issues related to when a second finger enters or leaves the field, causing the cursor to jump or the page to scroll unexpectedly; now, we discard any movement change that happens at the exact moment we detect a change in the number of fingers touching the trackpad. This doesn't completely resolve the issue but does greatly mitigate it. Signed-off-by: Clinton Sprain <clintonsprain@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: appletouch - implement sensor data smoothingClinton Sprain
Use smoothed version of sensor array data to calculate movement and add weight to prior values when calculating average. This gives more granular and more predictable movement. Signed-off-by: Clinton Sprain <clintonsprain@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: add driver for SOC button arrayLejun Zhu
This patch adds support for the GPIO buttons on some Intel Bay Trail tablets originally running Windows 8. The ACPI description of these buttons follows "Windows ACPI Design Guide for SoC Platforms". Signed-off-by: Lejun Zhu <lejun.zhu@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pm8xxx-vibrator - add DT match tableStephen Boyd
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-pwrkey - migrate to DTStephen Boyd
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - migrate to DTStephen Boyd
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - migrate to regmap APIsStephen Boyd
Use the regmap APIs for this driver instead of custom pm8xxx APIs. This breaks this driver's dependency on the pm8xxx APIs and allows us to easily port it to other bus protocols in the future. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - migrate to devm_* APIsStephen Boyd
Simplify the error paths and reduce the lines of code in this driver by using the devm_* APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: pmic8xxx-keypad - fix build by removing gpio configurationStephen Boyd
The gpio configuration in this driver doesn't work because the gpio.h include doesn't exist. Remove the configuration as it isn't strictly necessary, allowing us to actually compile this driver. If it's needed in the future, it should be done via a pinctrl driver. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-30Input: add new driver for ARM CLPS711X keypadAlexander Shiyan
This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs. Target CPU contain keyboard interface which can scan 8 column lines, so we can read row GPIOs to read status and determine asserted state. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-29Input: mousedev - fix race when creating mixed deviceDmitry Torokhov
We should not be using static variable mousedev_mix in methods that can be called before that singleton gets assigned. While at it let's add open and close methods to mousedev structure so that we do not need to test if we are dealing with multiplexor or normal device and simply call appropriate method directly. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551 Reported-by: GiulioDP <depasquale.giulio@gmail.com> Tested-by: GiulioDP <depasquale.giulio@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-29Input: don't modify the id of ioctl-provided ff effect on upload failureElias Vanderstuyft
If a new (id == -1) ff effect was uploaded from userspace, ff-core.c::input_ff_upload() will have assigned a positive number to the new effect id. Currently, evdev.c::evdev_do_ioctl() will save this new id to userspace, regardless of whether the upload succeeded or not. On upload failure, this can be confusing because the dev->ff->effects[] array will not contain an element at the index of that new effect id. This patch fixes this by leaving the id unchanged after upload fails. Note: Unfortunately applications should still expect changed effect id for quite some time. This has been discussed on: http://www.mail-archive.com/linux-input@vger.kernel.org/msg08513.html ("ff-core effect id handling in case of a failed effect upload") Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - add support for M09 firmware versionLothar Waßmann
There is a new firmware version for the EDT-FT5x06 chip. Add support for detecting the firmware version and handle the differences appropriately. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - ignore touchdown eventsLothar Waßmann
The chip may report invalid coordinates on touchdown events, so don't report the initial touchdown event. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - adjust delays to conform datasheetLothar Waßmann
The FT5x06 datasheet specifies a minimum reset width of 5ms and a delay between deassertion of reset and start of reporting of 300ms. Adjust the delays to conform to the datasheet. With the original delays I sometimes experienced communication timeouts when initializing the controller. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - add DT supportLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: edt-ft5x06 - several cleanups; no functional changeLothar Waßmann
- remove redundant parens - remove redundant type casts - fix mixed tab/space indentation Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: synaptics - add manual min/max quirk for ThinkPad X240Hans de Goede
This extends Benjamin Tissoires manual min/max quirk table with support for the ThinkPad X240. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: synaptics - add manual min/max quirkBenjamin Tissoires
The new Lenovo Haswell series (-40's) contains a new Synaptics touchpad. However, these new Synaptics devices report bad axis ranges. Under Windows, it is not a problem because the Windows driver uses RMI4 over SMBus to talk to the device. Under Linux, we are using the PS/2 fallback interface and it occurs the reported ranges are wrong. Of course, it would be too easy to have only one range for the whole series, each touchpad seems to be calibrated in a different way. We can not use SMBus to get the actual range because I suspect the firmware will switch into the SMBus mode and stop talking through PS/2 (this is the case for hybrid HID over I2C / PS/2 Synaptics touchpads). So as a temporary solution (until RMI4 land into upstream), start a new list of quirks with the min/max manually set. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: appletouch - dial back fuzz settingClinton Sprain
Let's dial back the default fuzz setting for most devices using this driver, based on values from user feedback from forums and bug reports. Signed-off-by: Clinton Sprain <clintonsprain@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: remove obsolete tnetv107x driversArnd Bergmann
The tnetv107x platform is getting removed, so the touchscreen and keypad drivers for this platform will no longer be needed either. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-28Input: sirfsoc-onkey - set the capability of reporting KEY_POWERXianglong Du
commit a1a7521064428fc1cf8 moved to report EV_KEY event(KEY_POWER) instead of reporting EV_PWR event(KEY_SUSPEND), but it didn't enable the capability, so the KEY_POWER will not be reported to userspace by input core. this patch fixes the issue. Signed-off-by: Xianglong Du <Xianglong.Du@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-26Input: cypress_ps2 - don't report as a button padsHans de Goede
The cypress PS/2 trackpad models supported by the cypress_ps2 driver emulate BTN_RIGHT events in firmware based on the finger position, as part of this no motion events are sent when the finger is in the button area. The INPUT_PROP_BUTTONPAD property is there to indicate to userspace that BTN_RIGHT events should be emulated in userspace, which is not necessary in this case. When INPUT_PROP_BUTTONPAD is advertised userspace will wait for a motion event before propagating the button event higher up the stack, as it needs current abs x + y data for its BTN_RIGHT emulation. Since in the cypress_ps2 pads don't report motion events in the button area, this means that clicks in the button area end up being ignored, so INPUT_PROP_BUTTONPAD actually causes problems for these touchpads, and removing it fixes: https://bugs.freedesktop.org/show_bug.cgi?id=76341 Reported-by: Adam Williamson <awilliam@redhat.com> Tested-by: Adam Williamson <awilliam@redhat.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-26Input: da9052_onkey - use correct register bit for key statusAnthony Olech
The wrong register bit of the DA9052/3 PMIC registers was used to determine the status on the ONKEY. Also a failure in reading the status register will no longer result in the work queue being rescheduled as that would result in a (potentially) endless retry. Signed-off-by: Anthony Olech <anthony.olech.opensource@diasemi.com> Acked-by: David Dajun Chen <david.chen@diasemi.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-23Input: wistron_btns - simplify dependenciesJean Delvare
Kconfig symbol X86_32 was introduced in October 2005, it's about time to use it. This clears the last occurrence of the legacy "X86 && !X86_64" construct :-) Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-23Input: olpc_apsp - fix dependencies of OLPC AP-SP driverJean Delvare
I don't think the OLPC AP-SP driver is generally useful without OLPC support. So make it depend on OLPC, unless build testing is enabled. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-23Input: hp_sdc - use del_timer_sync() in exit pathThomas Gleixner
Make sure that no callback is running before we teardown the module. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-03-01Merge tag 'v3.14-rc4' into nextDmitry Torokhov
Merge with Linux 3.14-rc4 to bring devm_request_any_context_irq().
2014-02-23Merge tag 'regulator-v3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Mostly unexciting driver fixes, plus one fix to lower the severity of the log message when we don't use an optional regulator - the fixes for ACPI system made this come up more often and it was correctly observed that it was causing undue concern for users" * tag 'regulator-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max14577: Fix invalid return value on DT parse success regulator: core: Change dummy supplies error message to a warning regulator: s5m8767: Add missing of_node_put regulator: s5m8767: Use of_get_child_by_name regulator: da9063: Bug fix when setting max voltage on LDOs 5-11
2014-02-23Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Another four fixlets to tame the ARM orion irq chip" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: orion: Fix getting generic chip pointer. irqchip: orion: clear stale interrupts in irq_startup irqchip: orion: use handle_edge_irq on bridge irqs irqchip: orion: clear bridge cause register on init
2014-02-23Merge tag 'usb-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for reported issues for 3.14-rc4 The majority of these are for USB gadget, phy, and musb driver issues. And there's a few new device ids thrown in for good measure" * tag 'usb-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: need to mask when writting endptflush and endptprime usb: musb: correct use of schedule_delayed_work() usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP usb: gadget: fix NULL pointer dereference usb: gadget: printer: using gadget_is_otg to check otg support at runtime phy: let phy_provider_register be the last step in registering PHY phy-core: Don't allow building phy-core as a module phy-core: Don't propagate -ENOSUPP from phy_pm_runtime_get_sync to caller phy-core: phy_get: Leave error logging to the caller phy,phy-bcm-kona-usb2.c: Add dependency on HAS_IOMEM usb: musb: correct use of schedule_delayed_work() usb: musb: do not sleep in atomic context USB: serial: option: blacklist interface 4 for Cinterion PHS8 and PXS8 USB: EHCI: add delay during suspend to prevent erroneous wakeups usb: gadget: bcm63xx_udc: fix build failure on DMA channel code usb: musb: do not sleep in atomic context usb: gadget: s3c2410_udc: Fix build error usb: musb: core: Fix remote-wakeup resume usb: musb: host: Fix SuperSpeed hub enumeration usb: musb: fix obex in g_nokia.ko causing kernel panic
2014-02-23Merge tag 'tty-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY revert from Greg KH: "Here is a single commit, a revert of a sysfs file change that ended up breaking a userspace tool" * tag 'tty-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: Set correct tty name in 'active' sysfs attribute"
2014-02-23Merge tag 'staging-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fix from Greg KH: "Here is a single android driver fix for 3.14-rc4 that fixes a reported problem in the binder driver" * tag 'staging-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: binder: Fix death notifications
2014-02-23Merge tag 'char-misc-3.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fix from Greg KH: "Here is a single commit, to fix a reported problem in the mei driver" * tag 'char-misc-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: set client's read_cb to NULL when flow control fails
2014-02-23Merge remote-tracking branches 'regulator/fix/da9063', ↵Mark Brown
'regulator/fix/max14577' and 'regulator/fix/s5m8767' into regulator-linus
2014-02-23Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown
2014-02-22Revert "tty: Set correct tty name in 'active' sysfs attribute"Greg Kroah-Hartman
This reverts commit d8a5dc3033af2fd6d16030d2ee4fbd073460fe54. This breaks plymouth installs, either because plymouth is using the file "incorrectly" or because the patch is incorrect. Either way, this needs to be reverted until it is all figured out. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: Ray Strode <halfline@gmail.com> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay@vrfy.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Werner Fink <werner@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-22Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix writing the minimum temperature in max1668 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max1668) Fix writing the minimum temperature
2014-02-22regulator: max14577: Fix invalid return value on DT parse successKrzysztof Kozlowski
This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing of_node_put). The DTS parsing function returned number of matched regulators as success status which then was compared against 0 in probe. Result was a probe fail after successful parsing the DTS: max14577-regulator: probe of max14577-regulator failed with error 2 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviwed-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-21Merge tag 'irqchip-mvebu-fixes-3.14' of git://git.infradead.org/linux-mvebu ↵Thomas Gleixner
into irq/urgent irqchip mvebu fixes for v3.14 - orion: - fixes for clearing bridge cause register, and clearing stale interrupts Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-21Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull devicetree fixes from Grant Likely: "Device tree compatible match order bug fix This branch contains a bug fix for the way devicetree code identifies the type of device. Device drivers can contain a list of of_device_ids, but it more than one entry will match, then the device driver may choose the wrong one. Commit 105353145e, "match each node compatible against all given matches first", was queued for v3.14 but ended up causing other bugs. Commit 06b29e76a7 attempted to fix it but it had other bugs. Merely reverting the fix and waiting until v3.15 isn't a good option because there is code in v3.14 that depends on the revised behaviour to boot. This branch should finally fixes the problem correctly. This time instead of just hoping that the patch is correct, this branch also adds new testcases that validate the behaviour. The changes in this branch are larger than I would like for a -rc pull, but moving the test case data out of out of arch/arm so that it could be validated on other architectures was important" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: of: Add self test for of_match_node() of: Move testcase FDT data into drivers/of of: reimplement the matching method for __of_match_node() Revert "of: search the best compatible match first in __of_match_node()"
2014-02-21Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog fix from Wim Van Sebroeck: "It corrects the error code when no device was found for w83697hf_wdt" * git://www.linux-watchdog.org/linux-watchdog: watchdog: w83697hf_wdt: return ENODEV if no device was found
2014-02-21irqchip: orion: Fix getting generic chip pointer.Andrew Lunn
Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt handler. The bridge interrupt is implemented using a single generic chip. Thus the parameter passed to irq_get_domain_generic_chip() should always be zero. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Fixes: 9dbd90f17e4f ("irqchip: Add support for Marvell Orion SoCs") Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit (git 2.34.1) at 2025-05-31 01:51:12 +0000